Basically, I flashed the wrong TWRP recovery onto my S6 which is running on the latest on android 6.0.1 and now its stuck in a bootloop. So I tried to go into download mode to flash its stock firmware using odin. But the problem is that when I go into download mode, I'm stuck on the warning screen because when I press my volume buttons nothing happens so I can't get to the actual download screen. I know that its nothing to do with the hardware because I've checked up on that already and I'm just wondering if anyone knows the solution to this issue.
Please help, it would be very much appreciated :crying:
mda2997 said:
Basically, I flashed the wrong TWRP recovery onto my S6 which is running on the latest on android 6.0.1 and now its stuck in a bootloop. So I tried to go into download mode to flash its stock firmware using odin. But the problem is that when I go into download mode, I'm stuck on the warning screen because when I press my volume buttons nothing happens so I can't get to the actual download screen. I know that its nothing to do with the hardware because I've checked up on that already and I'm just wondering if anyone knows the solution to this issue.
Please help, it would be very much appreciated :crying:
Click to expand...
Click to collapse
Can you share a quick snap how your warning screen looks like? I suspect since your recovery is broken, it is directly going to download mode instead of asking for your confirmation (Volume up).
silent_freak said:
Can you share a quick snap how your warning screen looks like? I suspect since your recovery is broken, it is directly going to download mode instead of asking for your confirmation (Volume up).
Click to expand...
Click to collapse
Im really sorry i cannot get hold of a snap right now but i can tell you that I can boot up to the screen with a triangular warning sign and when i press volume uo or down nothing happens, the phone just stays in that screen
mda2997 said:
Im really sorry i cannot get hold of a snap right now but i can tell you that I can boot up to the screen with a triangular warning sign and when i press volume uo or down nothing happens, the phone just stays in that screen
Click to expand...
Click to collapse
Does ODIN detects the phone on that screen?
silent_freak said:
Does ODIN detects the phone on that screen?
Click to expand...
Click to collapse
No, ODIN does not detect the phone when its on this screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mda2997 said:
No, ODIN does not detect the phone when its on this screen
Click to expand...
Click to collapse
What happens when you press Volume Down (-) key? Does it try to restart? So, could it be a faulty volume up key?
silent_freak said:
What happens when you press Volume Down (-) key? Does it try to restart? So, could it be a faulty volume up key?
Click to expand...
Click to collapse
Even when i press the volume down key nothing happens
mda2997 said:
Even when i press the volume down key nothing happens
Click to expand...
Click to collapse
Try service center and play dumb? Have you tried that?
silent_freak said:
Try service center and play dumb? Have you tried that?
Click to expand...
Click to collapse
Haha no not yet. I'm guessing that there's no way to sort this problem out myself?
Related
I did flash the lollipop alpha. Realizing that there's nothing much I can do I decided to go back for CM11S. During the process I re root the phone try to flash the CM11S. And after finished flashing the phone won't boot up (even with any combination of buttons). My computer didn't pick up the phone as well. Does this mean that my One+ is bricked? Is there any solution?
Please help
My OnePlus screen never turn on after this happen to me. All the response from the phone was vibrates. Vol up/ down + power, I tried everything, but only vibrate and nothing happen after that.
If there's any help I would appreciate!!!!
Have you tried this? https://forums.oneplus.net/threads/...-solution-to-all-kinds-of-soft-bricks.142870/
Also, when you try to boot into fastboot, it does vibrate, right? Your computer should acknowledge the device is connected if that's the case.
TigerDNA said:
Also, when you try to boot into fastboot, it does vibrate, right? Your computer should acknowledge the device is connected if that's the case.
Click to expand...
Click to collapse
I have the same exact problem. My computer is acknowledged that the phone is being connected, it makes a classic windows sound of connected device into USB. But visual notification is not there as well as there is no new device displayed in the system. This just happens when I try to fastboot (power on + up button).
poisongas said:
I did flash the lollipop alpha. Realizing that there's nothing much I can do I decided to go back for CM11S. During the process I re root the phone try to flash the CM11S. And after finished flashing the phone won't boot up (even with any combination of buttons). My computer didn't pick up the phone as well. Does this mean that my One+ is bricked? Is there any solution?
Please help
My OnePlus screen never turn on after this happen to me. All the response from the phone was vibrates. Vol up/ down + power, I tried everything, but only vibrate and nothing happen after that.
If there's any help I would appreciate!!!!
Click to expand...
Click to collapse
Same here and my computer wont pick it up as a device. Ill keep tinkering/searching but if anyone has any ideas I would love to be a guinea pig.
Tidy_wave said:
I have the same exact problem. My computer is acknowledged that the phone is being connected, it makes a classic windows sound of connected device into USB. But visual notification is not there as well as there is no new device displayed in the system. This just happens when I try to fastboot (power on + up button).
Click to expand...
Click to collapse
You should still be able to push to the phone even if nothing is on the screen.
Even if it doesnt pick up the device on the computer or in cmd?
Check this post for a solution :
https://forums.oneplus.net/threads/s...us-one.104943/
start from "HERE IS THE SOLUTION"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
shadsilvs said:
Even if it doesnt pick up the device on the computer or in cmd?
Click to expand...
Click to collapse
It did pick up as this one
TheManDroid said:
Check this post for a solution :
start from "HERE IS THE SOLUTION"
Click to expand...
Click to collapse
Will give you the resolve asap. I'm following step by step finger cross!!!!!!
You need to install the right drivers so that you can use the Msm8974DownloadTool
Apparently when i was flashing rom, i think i had hard bricked my opo. I couldnt even boot into anything (even fastboot,recovery). When i turn it on, I couldnt see anything on the screen , there was a vibration and that's all. My PC couldnt even detect adb. I tried the method below but unfortunately, the thin cable that is connected to my vol buttons, i accidentally broke it so i couldnt use my vol buttons. I'm only left with my power button. I tried reconnecting the thin cable by holding it as close as possible to the part where i broke it, and pressing the vol up + power button at the same time but my PC couldnt detect any input. Is there any way for me or should i say goodbye to my beloved opo?? :crying::crying:
http: //forum.xda-developers.com/oneplus-one/help/wrong-kernel-black-screen-fastboot-adb-t2835696/page16#post55129486
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Without your volume buttons you're pretty screwed. But you could try this:
http://forum.xda-developers.com/showthread.php?t=2991851
Transmitted via Bacon
The problem is i cant push the up vol button, unless there's a simulator or external device that could stimulate the vol buttons. I tried using earphones with vol buttons but it didnt work.
velato2006 said:
The problem is i cant push the up vol button, unless there's a simulator or external device that could stimulate the vol buttons. I tried using earphones with vol buttons but it didnt work.
Click to expand...
Click to collapse
Did you actually read that link? It doesn't require you to be in fastboot mode.
Transmitted via Bacon
timmaaa said:
Did you actually read that link? It doesn't require you to be in fastboot mode.
Transmitted via Bacon
Click to expand...
Click to collapse
Yup i read it. It doesnt require me to be in fastboot mode but it says to press Volume UP + Power which i assume would trigger the qualcomm drivers or something like that during hard bricked.
Anyone?? Can i simply solder the cable, will it work??
I'm in desperate need of some help. I tried to root my OPO after successfully managing to recover it to CM11 and install TWRP. However, the SuperSU installation stalled the phone, so I couldn't be bothered waiting and hard shut down the phone by holding the power button. And now when I try and use this tool again I get this. The MD5 log says the phone is "8974_msimage.mbn: OK
" , but the phone can't even boot into fastboot, recovery and there aren't even any vibrations at all, it's just dead.
PikuChan said:
I'm in desperate need of some help. I tried to root my OPO after successfully managing to recover it to CM11 and install TWRP. However, the SuperSU installation stalled the phone, so I couldn't be bothered waiting and hard shut down the phone by holding the power button. And now when I try and use this tool again I get this. The MD5 log says the phone is "8974_msimage.mbn: OK
" , but the phone can't even boot into fastboot, recovery and there aren't even any vibrations at all, it's just dead.
Click to expand...
Click to collapse
You have a thread for this here:
http://forum.xda-developers.com/oneplus-one/help/unbricking-issues-help-please-sahara-t3144333
Please don't double post.
hi i tried to update my galaxy s6 sm-g920f and its now stuck on the following screen. im unable to boot into download mode. any help with what to do next. kies and smart switch wont recover the firmware!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
stuck with the warning triangle say an error has occurred while updating the device software. use the emergency recovery function in the smart switch pc software.
Try these steps.
1. Press and hold both volume down + power buttons at the same time until the phone LCD shuts off.
2. Once LCD powers down press and hold volume down + home button + power button to get to download mode.
3. Reflash stock 5.1.1 ROM via odin.
4. If it does no work bring your S6 back to Samsung for warranty repair.
roydok said:
Try these steps.
1. Press and hold both volume down + power buttons at the same time until the phone LCD shuts off.
2. Once LCD powers down press and hold volume down + home button + power button to get to download mode.
3. Reflash stock 5.1.1 ROM via odin.
4. If it does no work bring your S6 back to Samsung for warranty repair.
Click to expand...
Click to collapse
thank you for your reply. this didnt work odin wont get past setup connection. ive now emailed Samsung
craigmgzs55 said:
thank you for your reply. this didnt work odin wont get past setup connection. ive now emailed Samsung
Click to expand...
Click to collapse
managed to get it into download mode again and finally after reading another thread and renaming the hidden.img file i now have my phone back.
Came here to suggest the hidden.img fix, glad you've got it sorted
craigmgzs55 said:
managed to get it into download mode again and finally after reading another thread and renaming the hidden.img file i now have my phone back.
Click to expand...
Click to collapse
Can you please share how exactly you did fix this? (where can I find the another thread?) I have the same problem here and want to follow the same procedure. I also tried to enter into download mode with no success and keep coming back the triangle error. PLEASE HELP!
Hello,
First: i'm sorry if i don't speak perfectly english but I hope someone could help me.
I got a one and a half years old Honor 6X BLN-L21 and it is almost bricked.
A year ago I tried to unlock the bootloader, to root my phone. I did a mistake which made me want to get back to normal rom by removing TWRP.
Since this moment, I can't update my phone or relock bootloader because:
- Every reboot there is a "Your device has been unlocked and can't be trusted" message
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- I can't lock my bootloader because I can't access bootloader, because it needs a reboot and I get this message every reboot
- I can't update my phone for the same reason
- I can't access to recovery because it reboots everytime I turn off my phone one second later so it makes impossible to access recovery with volume buttons + power button
So I can't put a new rom with sdcard dload folder.
I can access my phone by waiting for it to get discharged, and then powering it with usb cable, and it boots normally.
Please help me, I really want to move to android Oreo.
Thanks
You should be able to boot to fastboot.
Connect phone to pc, press power key and once its in the process of shutdown, keep pressing the volume down key.
shashank1320 said:
You should be able to boot to fastboot.
Connect phone to pc, press power key and once its in the process of shutdown, keep pressing the volume down key.
Click to expand...
Click to collapse
It didn't work, it goes to the message directly and pressing power + volume down doesn't change anything
Etyop said:
It didn't work, it goes to the message directly and pressing power + volume down doesn't change anything
Click to expand...
Click to collapse
Is your phone turning off?
shashank1320 said:
Is your phone turning off?
Click to expand...
Click to collapse
It turns off but one second later it restart on with the message
Etyop said:
It turns off but one second later it restart on with the message
Click to expand...
Click to collapse
What have you done exactly
shashank1320 said:
What have you done exactly
Click to expand...
Click to collapse
Power button to the shutdown, and then volume down, but it doesn't have the time because whatever i do, it restarts automatically as fast as possible
EDIT: I didn't understood why, but fastboot worked suddenly. I relocked my bootloader but I can't update my phone. Stuck in EMUI 5.1 because when I update eRecovery says my data partition is highly damaged and need to format. I did 2 formats but the eRecovery still blocks update with the same message.
Have you seen my guide before?6X
player615 said:
Have you seen my guide before?6X
Click to expand...
Click to collapse
Well, I'm not sure I want to open my phone just to update it. I want to update it, but I mean, isn't it risky to open ?
Why did you relock the boot loader tho. Unlock it and then follow Shashanks Guide. Works perfectly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was figuratively about to load lineage os in twrp when my gf asked me to give her mate a lift. so i left phone on thinking nothing of it then came home to this... there was almost some domestic abuse...lol
you cannot boot into download mode anymore?
I'm bricked too but it's very much worse than that I have completely black screen. But phone still responds to the Computer in device manager. Comes up with MediaTek driver. I have libusb installed. Not sure what to do. I have the A125U model.
LR7875 said:
you cannot boot into download mode anymore?
Click to expand...
Click to collapse
no doesnt respond to buttons at all, boots up then samsung then that screen. i might have to take it apart, i have the tools.
YerBallix said:
no doesnt respond to buttons at all, boots up then samsung then that screen. i might have to take it apart, i have the tools.
Click to expand...
Click to collapse
usb bugging isnt on so cant flash stock rom or anything
YerBallix said:
usb bugging isnt on so cant flash stock rom or anything
Click to expand...
Click to collapse
FIXED GOT INTO DL MODE, loading stock rom, phone in prenormal state now though better than brick
YerBallix said:
no doesnt respond to buttons at all, boots up then samsung then that screen. i might have to take it apart, i have the tools.
Click to expand...
Click to collapse
was trying to enter dl mode with power on, don't laugh im new to this
YerBallix said:
FIXED GOT INTO DL MODE, loading stock rom, phone in prenormal state now though better than brick
Click to expand...
Click to collapse
so you can now boot into android? you can do not turn off device and connect to internet for 7 days for the rmm to turn normal
I still haven't figured out how to get mine out of bprom mode
LR7875 said:
so you can now boot into android? you can do not turn off device and connect to internet for 7 days for the rmm to turn normal
Click to expand...
Click to collapse
I was able to get out of prenormal instantly, but I have a google
YerBallix said:
I was able to get out of prenormal instantly, but I have a secure google
Click to expand...
Click to collapse
You bought it 2nd hand? Can you delete your Google account from your phone?
Yr phone should (always) be able to enter download mode.
Just press power + vol down with USB (connected to PC) and turn of, then power + vol up untill download mode starts.
As said, it'll always start download mode.
There you can just flash repair Firmware in ODIN and get it back to "pre"normal working state.
edward0181 said:
Yr phone should (always) be able to enter download mode.
Just press power + vol down with USB (connected to PC) and turn of, then power + vol up untill download mode starts.
As said, it'll always start download mode.
There you can just flash repair Firmware in ODIN and get it back to "pre"normal working state.
Click to expand...
Click to collapse
No download mode. It's currupt or something. Stays in vcom no matter what I flash successfully. Verified boot is enabled. I'm not sure what I'm doing wrong. I've always flashed my mediatek devices successfully eventually but they never actually flash if you know what I mean. Flashing the preloader doesn't give me download mode back.