Apologies ahead of time for being very late to the party and for general noob-ness. I've got an AT&T Atrix 2 still on 2.3.6, believe it or not. OTA updates haven't worked for me, whether because my carrier is Red Pocket or because I'm rooted or for some other reason.
So I want to flash a new ROM and I've been reading up. Every ROM I've read about requires BMM. It was available on its own, then it was in the Play store, but now it's not there either. I've read that Safestrap is a good alternative to BMM, but I believe development has ended on that as well.
So what should I use?
Thanks in advance for any help you can provide!
ONLY USE BMM for Atrix 2
You can find a detail tutorial How to install any KK ROM on system 1 for Atrix 2 AT&T here
http://forum.xda-developers.com/showpost.php?p=61919769&postcount=19
And remember once you flashed ICS, NEVER flash back to 2.3.x
Thanks! I'll give this a try.
Related
[Q] Can install cooked ROMs or any of the leaked (from India or China) on Atrix AT&T?
Hey guys, first of all I must say that is not English, I speak Spanish so if I say something wrong I hope to understand.
I turn to you for that, I buy a Refurbished Atrix 2 Released to Amazon, is AT & T My question is: I can install cooked ROMs or any of the leaked (from India or China)? I would like to tell me if I can do and if there is a tutorial to install.
Thank you for your attention!
venezuelanboy said:
Hey guys, first of all I must say that is not English, I speak Spanish so if I say something wrong I hope to understand.
I turn to you for that, I buy a Refurbished Atrix 2 Released to Amazon, is AT & T My question is: I can install cooked ROMs or any of the leaked (from India or China)? I would like to tell me if I can do and if there is a tutorial to install.
Thank you for your attention!
Click to expand...
Click to collapse
you can't install the leaks.
There are multiple roms you can install in the development section.
read the noob guide that is sticky for some basic info, then the rom threads for installation instructions
venezuelanboy said:
Hey guys, first of all I must say that is not English, I speak Spanish so if I say something wrong I hope to understand.
I turn to you for that, I buy a Refurbished Atrix 2 Released to Amazon, is AT & T My question is: I can install cooked ROMs or any of the leaked (from India or China)? I would like to tell me if I can do and if there is a tutorial to install.
Thank you for your attention!
Click to expand...
Click to collapse
You can install and run custom roms, but there's some things you need to read and understand beforehand. Please read THIS THREAD and you will see that there are several things you must first do, in order to be running custom roms on your device. First, you will need to make sure you are running on Android 2.3.6. for many of the roms in the ATRIX 2 Android Development section, then you will need to attain root, install the custom CWM (Clockworkmod) Recovery, then you will be able to flash whichever rom you so choose.
However, you need to understand that there are international firmware differences relating to the different ATRIX 2 models and their specific regional firmware(s), and roms that are based off these international firmwares may not work on your device! You need to know which device you have, and for which device the rom you are wanting to install is specified to run on. You may brick your phone if you try to install a rom that ins't designed to run on your device! (You have been warned) The leaked ICS updates will NOT work on an ATT.en.US system version!
Well, I do not think I will risk that many steps and I am a newbie.
But still thank you very much for clearing the doubt! Waiting For the ICS official.
venezuelanboy said:
Well, I do not think I will risk that many steps and I am a newbie.
But still thank you very much for clearing the doubt! Waiting For the ICS official.
Click to expand...
Click to collapse
It's really not all that difficult. You just have to have a clear understanding of what you are doing -BEFORE doing anything! It's useful knowledge, especially if you are interested in customizing your device beyond what Motorubbish has in its stock rom...
I like your clarity mate, at least you dont wanna mess with your device until you learn. Appreciate that
Sent from my MB865
And if I install the ROM and I want to return time after the original ROM from AT & T?
I can do?
venezuelanboy said:
And if I install the ROM and I want to return time after the original ROM from AT & T?
I can do?
Click to expand...
Click to collapse
Yes, after rooting, installing the custom recovery (CWM), and flashing a rom, you can always FXZ back to stock 2.3.5. and the OTA (over-the-air) update to 2.3.6. which will return your device to the fully stock Moto rom.
Hey Guys,
I wanted to ask a quick question. I am currently running LeeDroid's rom and I am done with it. I want to go back to what comes with original rom with ATT. I have HTC Inspire any recommendations where I can get it? I tried searching the forum but all the stuff seems from the begining of the year. I am not sure if there is something more recent. I really appreciate your help.
Thanks
axg275 said:
Hey Guys,
I wanted to ask a quick question. I am currently running LeeDroid's rom and I am done with it. I want to go back to what comes with original rom with ATT. I have HTC Inspire any recommendations where I can get it? I tried searching the forum but all the stuff seems from the begining of the year. I am not sure if there is something more recent. I really appreciate your help.
Thanks
Click to expand...
Click to collapse
If I understand you correctly, you could just use the Ace Advanced Hack Kit (you're gonna have to Google for it, the developer pulled his work from XDA and thus it would not be proper to link to it) to unroot and flash back to the stock ROM, then use the Software Update to update to the latest version. Alternatively, Gizmoe has taken the latest stock ROM update and rooted it. You could always flash that and keep root, if you wish.
It was the first ROM on the I4G's developement page. Jeez peeps, search for it
http://forum.xda-developers.com/showthread.php?t=1810461
It's not pure stock, bloatware is gone, there's some tweaks, and you retain root.
If you want to lose root (not sure why anyone would), you can download the update package from HTC. You'll probably lose everything you have , but you'll be on 100% pure stock.
Installing OTA update if you're rooted doesn't work
tried it, update does not launch, but again, why would you
xxkid123 said:
It was the first ROM on the I4G's developement page. Jeez peeps, search for it
http://forum.xda-developers.com/showthread.php?t=1810461
It's not pure stock, bloatware is gone, there's some tweaks, and you retain root.
If you want to lose root (not sure why anyone would), you can download the update package from HTC. You'll probably lose everything you have , but you'll be on 100% pure stock.
Click to expand...
Click to collapse
I used the steps described by cbetso 14 May 2012 on HOW TO ROOT YOUR TAB (message #33) in the Samsung Galaxy Tab 2 section of xda developers Forum. It is the unlockr method. It worked great. Thank you to everyone there who shared so much!
It gave me the message: "You have successfully rooted your tablet as well as installed CWM recovery on it."
The 4.0.4 update was offered by Samsung several months ago, and Jelly Bean may be offered in the future. My questions are simple:
In the rooting process, did I overwrite the official ICS 4.0.3 Samsung ROM?
May I update to 4.0.4 from the currently rooted state?
Must I remove CWM before updating?
And/or must I do something else to prepare the Tab in advance of applying the updates?
If so, please point me to a location on the forum where the steps are listed.
Sorry for the Beginner questions. Thank you in advance for any help.
bettyhills said:
I used the steps described by cbetso 14 May 2012 on HOW TO ROOT YOUR TAB (message #33) in the Samsung Galaxy Tab 2 section of xda developers Forum. It is the unlockr method. It worked great. Thank you to everyone there who shared so much!
It gave me the message: "You have successfully rooted your tablet as well as installed CWM recovery on it."
The 4.0.4 update was offered by Samsung several months ago, and Jelly Bean may be offered in the future. My questions are simple:
In the rooting process, did I overwrite the official ICS 4.0.3 Samsung ROM?
May I update to 4.0.4 from the currently rooted state?
Must I remove CWM before updating?
And/or must I do something else to prepare the Tab in advance of applying the updates?
If so, please point me to a location on the forum where the steps are listed.
Sorry for the Beginner questions. Thank you in advance for any help.
Click to expand...
Click to collapse
The 4.0.4 update was offered by Samsung several months ago, and Jelly Bean may be offered in the future. My questions are simple:
In the rooting process, did I overwrite the official ICS 4.0.3 Samsung ROM? No, all you did was provide a modified script. Although, I may be stood corrected, as I did not find your link to your rooted method.
May I update to 4.0.4 from the currently rooted state? If you are rooted, then no you need to be Stock. Unless some one has provided an Updated.zip, then that can be applied over your root method.
Must I remove CWM before updating? No, if you have returned to Stock. The Stock Recovery will be applied over the Custom Recovery. Unless again, someone has provided the proper Updated.zip that can be applied through a Custom Recovery.
And/or must I do something else to prepare the Tab in advance of applying the updates? If you return to Stock, No. If someone has provided an Update.zip to flash from a Custom Recovery (i.e, CWM), then No...
If so, please point me to a location on the forum where the steps are listed. Hello bettyhills, I am fairly new to this particular device, and the only thing I have found here is a download in regards to a 4.0.4 update, from the 4.0.3 Stock version, is a download that consisted of a bunch of partition files, that needed to be installed via Heimdall. In my hesitation primarily, because it neglected to provide the correct instructions. I opted to wait for the Jelly Bean updated, which has yet to have been correctly distributed for the GT2-p3113 device, although there is a GT2-p3110 version out there... To reiterate, in my hesitation I told myself I would wait for the Jelly Bean update before flashing a Stock Rom to rightfully except an Official Samsung Distribution, by returning to Stock and re-rooting...
Although, you may want to wait for a more like-able suggestion..., from someone else!!!
i have been using my inspire 4g for few years now with the stock 2.3.3 w/o any problem until i accepted the update notification from at&t for 2.3.5 which i hate now. Long story short, it just made my exchange email crap and it became a burden. I do not know anything about rooting so bought a used Atrix 2 hoping to have ICS on it.
But the phone came withe the following:
Android Version: 2.3.5
System Version: 55.11.11.MB865.ATT.en.US
Build Number: 5.5.1-175_EDFFW1-11
As soon as I power on, the setup screen comes in where I enter my google details and it takes me to home screen and all is well. But when I click the 'Contacts' icon, it takes me to AT&T address book directly and starts rotating endlessly. Never give me an option to disable AT&T address book in contacts. It goes directly there and never completes even though I have data and wifi enabled. I tried at&t support as i don't have at&t phonebook registered - they asked me to upgrade to ICS.
Then I tried the OTA ICS upgrade and it always says the 'The device is upto date and no software upgrade is necessary'. It never upgrades the OS. At this point, at&t said they can't do anything and asked me to talk to Motorola. Motorola said this phone is running a version that is not supported so they can't help either. I have been googling and reading a lot of posts in this forum for help without much success.
I did check out the following and asked for help there:
http://forum.xda-developers.com/showthread.php?t=2047087&page=2
http://forum.xda-developers.com/showthread.php?t=1779968&page=69
Can someone please point me a thread or give me steps i need to follow to get this phone out of stock and working condition?
I am also working on getting my inspire out of stock OS but would love to get this phone fixed first.
Thanks in advance.
jsknair said:
i have been using my inspire 4g for few years now with the stock 2.3.3 w/o any problem until i accepted the update notification from at&t for 2.3.5 which i hate now. Long story short, it just made my exchange email crap and it became a burden. I do not know anything about rooting so bought a used Atrix 2 hoping to have ICS on it.
But the phone came withe the following:
Android Version: 2.3.5
System Version: 55.11.11.MB865.ATT.en.US
Build Number: 5.5.1-175_EDFFW1-11
As soon as I power on, the setup screen comes in where I enter my google details and it takes me to home screen and all is well. But when I click the 'Contacts' icon, it takes me to AT&T address book directly and starts rotating endlessly. Never give me an option to disable AT&T address book in contacts. It goes directly there and never completes even though I have data and wifi enabled. I tried at&t support as i don't have at&t phonebook registered - they asked me to upgrade to ICS.
Then I tried the OTA ICS upgrade and it always says the 'The device is upto date and no software upgrade is necessary'. It never upgrades the OS. At this point, at&t said they can't do anything and asked me to talk to Motorola. Motorola said this phone is running a version that is not supported so they can't help either. I have been googling and reading a lot of posts in this forum for help without much success.
I did check out the following and asked for help there:
http://forum.xda-developers.com/showthread.php?t=2047087&page=2
http://forum.xda-developers.com/showthread.php?t=1779968&page=69
Can someone please point me a thread or give me steps i need to follow to get this phone out of stock and working condition?
I am also working on getting my inspire out of stock OS but would love to get this phone fixed first.
Thanks in advance.
Click to expand...
Click to collapse
If you want to get the official ICS then here is the fxz for AT&T US phones (if you are somewhere else or using a different carrier, then you probably don't want this and need to supply more info.)
A couple of things to note. Once you upgrade to the official ICS there is NO going back to Gingerbread (unless someone hacked something together and I missed it), but it's best to assume you won't. Make backups before you do anything, better safe than sorry. If you don't like not having an option to revert to Gingerbread, then there are other options, but not the one mentioned.
If all is good and you want to flash the Official ICS, then you can visit the noob guide which will tell you how to flash a FXZ and what is needed.
Thank you. I really don't like the idea of not going back to Gingerbread but at this time my priority is to get this atrix 2 up and running. So am ok to get the official ics but the following says i should go to 2.3.6 in order to get to ics. Is that still true for the link you provided?
http://forum.xda-developers.com/showthread.php?t=1779968
jsknair said:
Thank you. I really don't like the idea of not going back to Gingerbread but at this time my priority is to get this atrix 2 up and running. So am ok to get the official ics but the following says i should go to 2.3.6 in order to get to ics. Is that still true for the link you provided?
http://forum.xda-developers.com/showthread.php?t=1779968
Click to expand...
Click to collapse
The link you posted is for ICS Leak#1, that will get you on ICS and as long as you're on Leak #1 only, you can revert to Gingerbread by using a specific FXZ from the link you posted. Your choice. The Official ICS that I posted has everything and will overwrite everything, so whether you flash from 2.3.5 or 2.3.6 it's going to upgrade the bootloader and system. Just remember, if you use the Offical ICS, then no more Gingerbread. Personally, I haven't wanted or needed Gingerbread since I got ICS.
Dear jsknair.
You can directly flash with OTA ICS update, no need to go to 2.3.4 then update to 2.3.6 the OTA ICS.
I very easy as other guy said study noob guide. After that within 10 min you will be on ICS and its really good you don't think to go back to GB.
I like to thanks Jimbirdman :thumbup:to help me for update my Atrix 2.
Sent from my MB865 using xda app-developers app
---------- Post added at 04:27 PM ---------- Previous post was at 04:20 PM ----------
Note# This fxz is for AT&T phone only.
These link provided by Jimbirdgman to me and i successfully done.
Here is the link to the AT&T ICS FXZ, you will flash that with RSD lite 6.0:
http://sbf.droid-developers.org/edison/InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip
RSD lite 6.0:
https://hotfile.com/dl/174582400/60ad26d/RSDLite_6.0.rar.html
Sent from my MB865 using xda app-developers app
Thank you both. My phone is up and running in ICS now and all the problems went away!
dev i am in desperate need of bootloader unlocker for my atrix 2 (with ics updated in india)
plz help
there is a "[PROJECT]Bootloader Unlock" in "Atrix 2 Android Development" its was released on 2nd nov 2011 means at that time atrix 2 was on
gingerbread ,as i have updated it to ics it am not sure about "[PROJECT]Bootloader Unlock"
second reason for not been sure about "[PROJECT]Bootloader Unlock" is , when this unlocker was released there was atrix 2with at&t and in india its is releaded without at&t.so i m confused whether it will work or not
as motorola is not providing any more update for atrix 2(at least in india) ,now i am in very much need for bootloader unlocker
plz help plzzzzzzzzzzzzzzzzzzz
There's no bootloader unlock for no one.
Why do you want to unlock your bootloader if there's no room that requires other kernel?
^+1. And there is no need for the bootloader to be unlocked to flash the roms in our dev section.! Just follow the instructions there!
Lifehacker7 said:
^+1. And there is no need for the bootloader to be unlocked to flash the roms in our dev section.! Just follow the instructions there!
Click to expand...
Click to collapse
frist of all thanks for quick reply :highfive::angel::fingers-crossed:
i have 3 question
Q1-i doidnt under stand ur point becoz befor e posting this thread i googled for custom rom or cm10 & i found this on a motorola official discussion
(if u google "ics or bootloader unlock on atrix 2" then its 3rd option)
"Question Title:
ICS Update or Unlock Bootloader
Comment:
I have brought Brand new Motorola Atrix 2 (Indian Version and not US AT&T model) last month hoping it will be getting ICS update, but now my Skyrocket got updated to ics and Updated my SGS I9000 to JellyBean using CM10. Being such a capable device Atrix 2 is still running on 2.3.6 (Out of Box), which is also having network connectivity issue here in India. I now feel it was a mistake buying a Motorola Atrix2 and could have bought Sony Xperia P which is in same price bracket which is getting update much faster.
If Motorola can`t update Atrix2 to stable ICS, i would like them to unlock bootloader for same as there are many developers around who can create custom ROMS (ICS or even JB) much stable & faster than Motorola team.
To make matter worse yesterday news came out that Motorola are shutting down operations in Asia Pacific. I do hope they can provide us with either a stable ICS update or Unlock the bootloader.
"
so plz reply is it now nessecary to unlock bootloader for custom rom or cm10, as i like xda dev work becoz of
a-no company app
b-overclock Facility
Q2-secondly will i b able overclock in custom rom or cm10 (as my boot loader will b locked, will it let me over clock in cm10 or custum rom)
Q3-there r kernel avalible for over clocking but when i zip instal them by CMW they show no effect(may b becoz of bootloader not been unlocked)
so plz help me overclock becoz this device with overclock is an gr8 device
so plz helpppppppppppppppp
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
brianmoyano said:
There's no bootloader unlock for no one.
Why do you want to unlock your bootloader if there's no room that requires other kernel?
Click to expand...
Click to collapse
brianmoyano said:
There's no bootloader unlock for no one.
Why do you want to unlock your bootloader if there's no room that requires other kernel?
Click to expand...
Click to collapse
Lifehacker7 said:
^+1. And there is no need for the bootloader to be unlocked to flash the roms in our dev section.! Just follow the instructions there!
Click to expand...
Click to collapse
frist of all thanks for quick reply :highfive::angel::fingers-crossed:
i have 3 question
Q1-i doidnt under stand ur point becoz befor e posting this thread i googled for custom rom or cm10 & i found this on a motorola official discussion
(if u google "ics or bootloader unlock on atrix 2" then its 3rd option)
"Question Title:
ICS Update or Unlock Bootloader
Comment:
I have brought Brand new Motorola Atrix 2 (Indian Version and not US AT&T model) last month hoping it will be getting ICS update, but now my Skyrocket got updated to ics and Updated my SGS I9000 to JellyBean using CM10. Being such a capable device Atrix 2 is still running on 2.3.6 (Out of Box), which is also having network connectivity issue here in India. I now feel it was a mistake buying a Motorola Atrix2 and could have bought Sony Xperia P which is in same price bracket which is getting update much faster.
If Motorola can`t update Atrix2 to stable ICS, i would like them to unlock bootloader for same as there are many developers around who can create custom ROMS (ICS or even JB) much stable & faster than Motorola team.
To make matter worse yesterday news came out that Motorola are shutting down operations in Asia Pacific. I do hope they can provide us with either a stable ICS update or Unlock the bootloader.
"
so plz reply is it now nessecary to unlock bootloader for custom rom or cm10, as i like xda dev work becoz of
a-no company app
b-overclock Facility
Q2-secondly will i b able overclock in custom rom or cm10 (as my boot loader will b locked, will it let me over clock in cm10 or custum rom)
Q3-there r kernel avalible for over clocking but when i zip instal them by CMW they show no effect(may b becoz of bootloader not been unlocked)
so plz help me overclock becoz this device with overclock is an gr8 device
so plz helpppppppppppppppp
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
sry i wasnt geting to reply u both dev at same time
First, forget about unlocking the bootloader. We don't need to unlock it to install the roms that we have in the developers sections.
Secondly, we have stable ics, and now, finally, we have a stable Jellybean for international phones.
But, i'm going to respond your questions in order.
1: The info that are you reading, is ooooold. If you want stable ICS, check this:
http://forum.xda-developers.com/showthread.php?t=1934874
Those are for international Atrix 2. It means, that ones they were not bought in AT&T.
And, if you have international atrix 2, you can choose jellybean, too
http://forum.xda-developers.com/showthread.php?t=2092107
2: Yes, you have to flash 2 .zip's files into the custom recovery.
I don't know too much about that. But, if you read a little, you'll see that is easy.
http://forum.xda-developers.com/showthread.php?t=1988411
3: There is no kernel available for overclocking besides the one we are using.
If you are trying to say the .zip's that you have to flash with Cwm, read the answer 2.
^^+1 what he said, but I would like to add, do yourself a huge favor and read EVERYTHING that pertains to your phones model BEFORE trying anything. Then read it all again. Then when you think you understand, read it again. You will see that most all of your questions have been previously answered, and you will gain knowledge in the process. It's a win/win for everybody that has the patience and puts in the effort to learn on their own. Good luck to ya.:thumbup:
brianmoyano said:
First, forget about unlocking the bootloader. We don't need to unlock it to install the roms that we have in the developers sections.
Secondly, we have stable ics, and now, finally, we have a stable Jellybean for international phones.
But, i'm going to respond your questions in order.
1: The info that are you reading, is ooooold. If you want stable ICS, check this:
http://forum.xda-developers.com/showthread.php?t=1934874
Those are for international Atrix 2. It means, that ones they were not bought in AT&T.
And, if you have international atrix 2, you can choose jellybean, too
http://forum.xda-developers.com/showthread.php?t=2092107
2: Yes, you have to flash 2 .zip's files into the custom recovery.
I don't know too much about that. But, if you read a little, you'll see that is easy.
http://forum.xda-developers.com/showthread.php?t=1988411
3: There is no kernel available for overclocking besides the one we are using.
If you are trying to say the .zip's that you have to flash with Cwm, read the answer 2.
Click to expand...
Click to collapse
thanx alot for ur detaile answer
it helped me & now i am runing jb withh root
thnx:laugh:
brianmoyano said:
First, forget about unlocking the bootloader. We don't need to unlock it to install the roms that we have in the developers sections.
Secondly, we have stable ics, and now, finally, we have a stable Jellybean for international phones.
But, i'm going to respond your questions in order.
1: The info that are you reading, is ooooold. If you want stable ICS, check this:
http://forum.xda-developers.com/showthread.php?t=1934874
Those are for international Atrix 2. It means, that ones they were not bought in AT&T.
And, if you have international atrix 2, you can choose jellybean, too
http://forum.xda-developers.com/showthread.php?t=2092107
2: Yes, you have to flash 2 .zip's files into the custom recovery.
I don't know too much about that. But, if you read a little, you'll see that is easy.
http://forum.xda-developers.com/showthread.php?t=1988411
3: There is no kernel available for overclocking besides the one we are using.
If you are trying to say the .zip's that you have to flash with Cwm, read the answer 2.
Click to expand...
Click to collapse
i have tried this link
http://forum.xda-developers.com/show....php?t=1988411
but its not oc my atrix2 when it was ics
what i did
-downloaded & installed init.d & oc zip
n it didn't work
Q1-plzzzzz give me an summarized tutorial for this overclocking as i m not able to understand tutorial on link
Q2-now i m running jelly beans, so does this work on jb becoz its written in warning that"THIS WILL MESS UP YOUR PHONE IF YOU ARE CURENTLY RUNING ANY CM10 OR MAJICMOD!!!!!!!!!
THIS IS FOR FACTORY ICS, OR ICS PHONES THAT DO NOT ALREADY HAVE INIT.D!!!!! "
i wann known will it work on official jb