Related
I have the Kenwood DNX8120 and it works fine with my Fuze (did have disconnect issues but just updated the Kenwood firmware which should take care of that) but the SMS feature on the radio doesn't work. I know only certain phones are compatible with this feature but on the Kenwood compatibility list there are several HTC devices that work. In any case, does anyone know how to enable SMS over bluetooth on the Fuze?
Thanks
I have the Kenwood DNX8120 in my car and have had no luck getting the Fuze to work correctly. It constantly drops connection. I updated the Bluetooth firmware and that only seemed to make matters worse. It will pair with the Kenwood, but either won't make a phone call or will take up to 60 seconds (or not at all) for the Fuze to recognize I it the call button on the radio. SMS, sent and received call history also do not work.
Have you had similar issues?
I can not get sms working. The only other issue I have is that after a call, it drops the connection. If I get another incoming call, it will reconnect and the radio will ring and handle the call. But, if I want to place a call, I have to either select "set as hands free" of something similar, in the bluetooth settings on teh phone and it reconnects and I can dial. I just upgraded to elite rc3 and the problem is still there. I havn't messed with it enough yet to know if it dials ok without having to bring the phone out of standby yet. I too have updated the bluetooth drivers from Kenwood and that didn't help. I also tried the jetware handfree extension and didn't see any improvement.
I called HTC about this, and they told me it only "officially" supports a hand full of car units. Mostly in the Audi and BMW. They don't "officially" support anything from Kenwood so they were absolutely no help on this. I've also noticed this phone drops all connections except cell and data when it sleeps. Wifi, GPS and Bluetooh all seem to go to sleep with the phone. This seems to make bluetooth pretty useless if the connection drops every time the phone sleeps and needs to be manually reconnected.
I haven't seen it drop the bluetooth connection during sleep. I see that the Kenwood supports some HTC devices but not this one specifically. The other wierd thing is that the first time it pairs it shows the battery indicator but after the next connect it doesn't show it. It shows the battery icon but shows it empty. The jetware extension however does fix that. I will play some more with it and report here.
After resetting my phone to AT&T's original setup, I am experiencing the exact same functionality as you. It now sync's my call history and phone book. No voice dial support or SMS yet. (These have never worked with any of my phones) It will disconnect after a couple phone calls and I have to set as hands free to reconnect. Also, mine still looses the connection to the unit when it goes to sleep. I'm keeping it on a car charger for now and turning off any sleep function when charging. That at least keeps it connected until I make a call. It's almost still not worth using with having to reconnect hands free. Maybe if a hands free quick connect shortcut could be created?
This is all really ridiculous that a phone with this kind of tech can't auto pair and be ready for a call. My LG Chocolate had absolutely no problems with the Kenwood. As soon as the Kenwood finished booting the LG would auto connect and be ready for a call.
I thought I found a workaround at
http://forum.xda-developers.com/sho...ghlight=bluetooth+connection+drops+phone+call
But, once installed an trying to run BT Restart I get an error saying that I need .net compact framework (version 1 or 2) installed. Not sure what to do now, cant seem to find a cab for this.
I've used this package from another post on the forum. It has many useful apps including the latest version of .net compact framework.
http://www.tyguy.net/_xchg/PPC/@essentials.rar
Let me know how it turns out!
I will take a look but I have 3.5 already installed. I guess that app needs the older version. Not sure I want to mess with downgrading it.
Not Kenwood
Hey Guys,
I drive a Jag XK8 and it has the same issues you are mentioning with your Kenwood, but its an Alpine unit, it drops calls, and after the first call connects the second call rings on the stereo but you can only answer on the handset.
I also recently had a new Jag XF for a week. It had a full integration to the phone. It also only showed the battery status when the phone first connected then the battery showed empty. It would drop bluetooth connections constantly on some days (every 90secs) and then somedays it would keep the bluetooth connected without issue. Very unreliable.
The reason I bring this up, is just to let you know these issues are not limited to the Kenwood.
Dave
Just an FYI. I have found it easier to just go into setup in the Kenwood and reconnect the bluetooth from there when the phone disconnects. It's under Setup/Bluetooth/Set, then just click on the device and hit connect. It seems easier than fiddling with the phone while your driving.
Hey guys
Strange issue here. I paired my phone with my car through Bluetooth to make and receive calls using the car audio system. It works well.
However, if I fire Google Navigation, I can't here the spoken instructions through either the phone speaker or the car speakers.
I was not expecting navigation audio to be routed through Bluetooth audio, but I did expect the navigation instructions to come out of the phone speaker, as it does on the nexus one or the vibrant both running Android 2.2.
Is anybody else having this issue?
Thanks
Sent from my Nexus S using XDA App
bluetooth wont turn on
It just flashes the icon and does not turn on. From in settings same. Any ideas?
vapor311 said:
It just flashes the icon and does not turn on. From in settings same. Any ideas?
Click to expand...
Click to collapse
did you flash a new kernel or anything because the kernel in the dev thread is known to break bluetooth
if it does this stock out of the box try doing a system restore and then take it back if its still acting up because bluetooth should turn on
yea i used the pkg one that had SU etc on it. Suppose Ill have to flash back to stock arg.
just so peeps know with the bt issue flashing this fixed
http://forum.xda-developers.com/showthread.php?t=882333
Anyone?
Sent from my Nexus S using XDA App
Locking up slash rebooting while streaming bluetooth audio
Anyone else experiencing any sort of lockups rebooting streaming bluetooth audio. It seems like I can only get about 10 to 15 minutes streaming audio before the phone becomes completely unresponsive won't power on or anything
Sent from my Nexus S using XDA App
You should be thankful...I can't get more then 10 sec without it being cut off and play again...for...10 sec
what rom?
I had same issue once...i on CM7
Bluetooth doesn't stream audio to car - what's your experience
I've got a Ford Edge with the new Ford MyTouch/Sync system.
The Nexus S connects to the Bluetooth just fine; makes and receives calls perfectly. It will also connect to the Bluetooth Audio Stream for music playback, but won't play the audio over the car's speakers. Also, sometimes it connects, holds the connection for just a few seconds and then disconnects. My SGS and Nexus One work as expected, as does the iPhone, so it doesn't appear to be an issue with the car.
Seems like a bug in the NS to me.
I'm curious if others are streaming audio/music to their auto's BT system without issues?
It would be especially nice to know what anyone else with a new Ford/Lincoln is experiencing, but I'd also like to compile a list of what cars work and what don't.
I'm going to have to find some other BT device that I can test the stream on to see if my phone works with it or not. Maybe my Nexus One dock? I've never used that to stream audio even with the Nexus One.
In terms of troubleshooting my problem, I've already rebooted the phone and the car, un-paired and re-paired the phone with the car.
I've got a Mazda RX8 R3 and the NS will pair with the in-built car BT but drops the connection after a few minutes. It then refuses to connect again unless I re-pair, then a few minutes later it drops and we're back to square one.
The car's in-built BT worked fine with my HTC Desire, Hero, iPhone 3G and Blackberry 9700 so I'm guessing the Nexus S has a Bluetooth issue.
Mine works fine on my aftermarket Sony receiver.
having issues with bluetooth audio too, stream keeps breaking every now and then. Any fixes?
I've only streamed to the car stereo and had no issues. The phone is only about 10cms away.
Haven't tried my BT headphones yet, maybe range is the issue.
*On original ROM.
Mujja said:
I've only streamed to the car stereo and had no issues. The phone is only about 10cms away.
Haven't tried my BT headphones yet, maybe range is the issue.
*On original ROM.
Click to expand...
Click to collapse
tried placing the phone right next the the BT reciever and same problem. Only tried this once, maybe I'll try rebooting the phone.
no problem here
using Bionix 1.2
You're lucky, I can't even get BT music streaming to work with my car. No other BT devices to check with besides my Nexus One dock, which has no speakers.
BT works great for the phone, though, to make and receive calls.
Problem with Bluetooth
I cant get to work bluetooth on Nexus S.
When i enable it and try to send something from SGS to Nexus S it says me "This tranfer was canceled by the user" (Nexus S)
SGS says "Remote device rejected your request"
When i try send something from Nexus S, but use not function Send, i use function Bluetooth - it says me "The application Bluetooth Share (process com.android.bluetooth) has stopped unexpectedly. Please try again"
I tried factory reset, wipe cache, tried flash any other roms, but got NOTHING helpt me. I have this problem on 2 phones (2xNS).
Can someone give me files of BlueTooth share? (com.android.bluetooth)
That's an interesting problem you have. Mine did the same thing transfering from my computer to my NS. I just tried it again when I read your post (to make completely sure what the error was) and it has automagically fixed its self.
Well, seems i need a file \system\app\bluetooth.apk
Since the update, my Inspire locks up upon first use after connecting to my car. Reboots, then its ok. Anyone else experience anything like this and have any tips to correct it?
stupid thanks button.....
i havent had any problems with 2.3 and bluetooth. mine doesnt lock up when it connects to my car
Same
I have to force stop the Music app (poweramp). tried factory reset but no real difference. Also on the sony mex bt3800 I have, it will display icons for streaming and calls, well sometimes (of course) only one of those will turn on. Re-paired still doing it. grrrr.
heathroi said:
I have to force stop the Music app (poweramp). tried factory reset but no real difference. Also on the sony mex bt3800 I have, it will display icons for streaming and calls, well sometimes (of course) only one of those will turn on. Re-paired still doing it. grrrr.
Click to expand...
Click to collapse
I have the Mex-bt2800. You can turn the music streaming on by pressing the pause/play button when it's it bluetooth audio mode.
Sent from my Inspire 4G using the power of the dark side
Yeah, you'd like to think so, hit the arrow for play on poweramp right?
Well not quite as, if you start the car first then switch bluetooth on (you know powersaving) the message will display that the headset connected message then on the stereo , mostly, only the icon for media streaming will appear and the only reliable way to have both streaming and calls is to switch off bluetooth on the car stereo then switching it on again.
Froyo connected all time without issue and so did the 3GS i had previously.
The poweramp issue came about if you already had music playing through the internal speaker, started bluetooth, (you get the streaming media Icon on stereo) , then there would be no sound and poweramp would act if it had paused but no other button would work until it had been force stop. have only found time for a liittle bit of testing so can't tell much more about symptoms.
any other suggestions welcome
Hey there, I haven't had any issues with my BT either. I've used Ninja, Gingerbeast, and ARHD. I'm using it with the mex-bt3900 (i think thats right). i use it with the htc music app, google music app, pandora, and winamp. i havent had any lockups or anything on my end. what rom are you using? stock rom?
nhshah7 said:
Hey there, I haven't had any issues with my BT either. I've used Ninja, Gingerbeast, and ARHD. I'm using it with the mex-bt3900 (i think thats right). i use it with the htc music app, google music app, pandora, and winamp. i havent had any lockups or anything on my end. what rom are you using? stock rom?
Click to expand...
Click to collapse
Still stock. Might root and see if those other roms make a difference. Saw comment on ace root kit thread about something new coming out on that so may put up it until what ever it is announced. Be nice to get rid of the att bloat too.
I just got the charge today, and one issue is killing me. I drive about 6 hours per day. My android phone is connected to my stereo via the 3.5mm headphone jack. I use this to listen to music. On every other android phone i've had(beside the epic 4g), when i get a call, the music pauses, and when i press the button on my bluetooth, it answers the call, and my audio going out is picked up by the bluetooth, and the call audio coming in is heard through the bluetooth.
This phone for some reason tries to route audio through the 3.5 jack, even though the bluetooth answered the phone. worse yet, i can't find a way to switch it.
On the epic 4g this guy made an apk to hot fix the issue. Could someone port this by chance?
http://forum.xda-developers.com/sho...light=bluetooth+call+audio+routing+to+headset
THanks!
I had sold my charge a while back, but just eneded up buying one again. Anyone made progress on this issue? Thanks!
Hey - it seems the fix near the end of that thread you referenced does the trick. Flash this in cwm recovery. It should work on any FP1 or EP4D (haven't checked others) ROM - stock or custom - but as I have no bluetooth stuffs I haven't tested this thoroughly to see if anything else happens as a result of the minor change. Hope this helps folks!
While driving bluetooth stops or some time lag voice if wifi is on. same issue noticed without wifi enable also but very less.
It seems whenever wifi changes to different network or connects or disconnects bluetooth is loosing or lagging voice.
Where as if i put it on speaker i can hear sound from speaker. I tried 5-6 different bluetooth and having same issue. i got replacement of phone also but same issue with new phone also. I could verify with older phone and it seems issue is only with Idol 3. Is any one else facing similar issue?
I tested this using a Bluetooth headset, and I am unable to replicate it. Turning WiFi on and off has no noticeable effect on playback via a the Bluetooth headset. Unfortunately , I have no way to test this while driving .
stl1859 said:
I tested this using a Bluetooth headset, and I am unable to replicate it. Turning WiFi on and off has no noticeable effect on playback via a the Bluetooth headset. Unfortunately , I have no way to test this while driving .
Click to expand...
Click to collapse
This issue is mainly happening while driving. It seems like while driving phone tries to goes from LTE to different modes and same with wifi as it tries to connect to different wifi. In this process it starts to lags voice on bluetooth and in few cases sound get disconnected.
Are you listening to music on your phone or streaming?
I haven't had any issues while driving using both Google music and slacker. Those are the only two streaming apps i use tho. I leave my Wi-Fi on all day. My deck is a Bluetooth pioneer unit, though the model number escapes me at the moment. I'm on T-Mobile BTW.
I don't drive anymore but I stream Rhapsody overnight onto my BT speakers and it never has conked out on me yet. There was one time I did lose the BT connection to the speakers before I did the factory reset but no issues with the BT since.
Issue is not with listenting music, it is during call through bluetooth while driving and having wifi and bluetooth both on.
OK I'll test that later on today. How often/with what frequency does it happen to you?
psu2fan said:
OK I'll test that later on today. How often/with what frequency does it happen to you?
Click to expand...
Click to collapse
Almost 2 out of 3 attempts i am having this issue. even now in home i started call on bluetooth when wifi was off, then just put wifi one during call and voice from bluetooth started to get blurry and then other party could not hear me. and i had to disable wifi and then disable bluetooth and then on bluetooth again in phone.
Seems like issue is happening when phone is trying to connect to wifi and call is on bluetooth...
airplane mode on, wifi and blutooth on, LG HBS700 oem + netflix = audio lag. firmware update did not help. not ready to switch from s4 just too many quirks.
pepper454 said:
airplane mode on, wifi and blutooth on, LG HBS700 oem + netflix = audio lag. firmware update did not help. not ready to switch from s4 just too many quirks.
Click to expand...
Click to collapse
I do not have Netflix - but I tested with HBO Go - and YouTube - with airplane mode , WiFi and Bluetooth - And I am not seeing any audio lag - or audio interruption when switching from speakers to Bluetooth mid session. I am using Arctic P253BT headphones.
Alright I did a call today. It was only 5 minutes long but didn't notice anything. I'll try doing what you did starting a call in my driveway and turn WiFi on/off repeatedly at various time intervals.
I got replacement, but i can still see the issue with new phone also...
attitude_it7 said:
I got replacement, but i can still see the issue with new phone also...
Click to expand...
Click to collapse
Sorry, my testing is put on hold as I had to send the device in to get a new screen (cracked). I couldn't get it done before because my wife kept stealing my car
I'm having kinda' the same problem. The thing is everytime I connect/disconnect there's a general lag in the phone! after one minute or so, it starts working ok
jcipactli said:
I'm having kinda' the same problem. The thing is everytime I connect/disconnect there's a general lag in the phone! after one minute or so, it starts working ok
Click to expand...
Click to collapse
It's possible the bluetooth is unreliable because the phone gets busy as you indicated...I posted a couple of apps in the idol 3 apps section that help reduce lag and may help this...
Something I've done has made my bluetooth totally unreliable....whether linked to car or home phone system I can answer...talk for a few seconds and then it transfers the call back to the cell instead of the bluetooth device. I'll have to go back through my backups and find a version that doesn't do this.
I have demonstrated the same effect with my bt device (lg). When switching wifi networks bt microphone stop receiving so other party cannot hear me and the audio begins to break up and lag. I can switch off bt then back on and am fine till next wifi switchover. I was hoping the update from Alcatel would address this, was not the case. ;(
I also had the same kind of issue while listening music in car using Bluetooth, strangely it is happening when the WiFi try to connect to open WiFi available. And when that open WiFi is not able give internet accesses, then the phone just get stuck for some time. I have these issues frequently I need to restart my phone
I just purchase Alcatel Onetouch Idol 3 and and am having similar problem. I had a Plantronics M50 connected and people complained that I was breaking up and they couldn't hear me and it happened on my end sometimes too. When I'm calling someone, the ring will be normal at the beginning of the ring and then it will fad out at the end of the ring. Store rep told me this was normal. Has never done it with any of my other phones. Bought another bluetooth to try to determine if it was the bluetooth or the phone. Bought the Plantronics E50 and the same thing happens. Alcatel says it's the bluetooth and Plantronics says it's the phone. Betty at Alcatel also says the Plantronics bluetooth are not compatible with the Alcatel, however, the store sells the Plantronics Marque II to use with the Alcatel. Anyone have any suggestions or having the same problem?
I'm having the problem in car on bluetooth where the caller sounds like they are underwater and garbled and I'm told I do too. It comes and goes, very frustrating. I tested another Android and no problem.
skisom said:
I just purchase Alcatel Onetouch Idol 3 and and am having similar problem. I had a Plantronics M50 connected and people complained that I was breaking up and they couldn't hear me and it happened on my end sometimes too. When I'm calling someone, the ring will be normal at the beginning of the ring and then it will fad out at the end of the ring. Store rep told me this was normal. Has never done it with any of my other phones. Bought another bluetooth to try to determine if it was the bluetooth or the phone. Bought the Plantronics E50 and the same thing happens. Alcatel says it's the bluetooth and Plantronics says it's the phone. Betty at Alcatel also says the Plantronics bluetooth are not compatible with the Alcatel, however, the store sells the Plantronics Marque II to use with the Alcatel. Anyone have any suggestions or having the same problem?
Click to expand...
Click to collapse
There's a problem with the phone. It happened after the last Android update. My bluetooth was fine until marshmallow. It's so bad I went back to my Galaxy S4. I loved the Idol for just about everything, but horrible bluetooth. People can't hear you, it's a deal breaker.