I had tried RSD and fastboot and it won't flash it's from Telcel Mexico I tried the Retail Brazil Full JB and Mexico JB and nothing I had also tried to unlock the bootloader but I get an error messages saying this device is not eligible to unlock bootloader some message like that
this is the error message I'm getting when I try with RSD
downgrade security version
update gpt.main version failed
preflash validation failed for gpt
and when I try with Fastboot I get send ok but faile at writing on every line
a message that says failure remote something like that
help please
XT925 Still won't flash
I was able to unlock bootloader but still giving me the same exact error messages when trying to flash
How did you unlock the bootloader?
I know about "fastboot oem get_unlock_data", but in my case this command returns that wasn't possible get any information.
Related
Background:
I was having issues with my front/rear cameras failing to initialize sometimes, so I decided to do a factory reset of my phone. I was on 9.18, both rooted and unlocked (I unlocked prior to going to 9.18). I was able to use the RAZR Utility to downgrade to 4.1.2 and then root again. However, when I did the OTA update for my phone, the update failed and now my phone is stuck in "AP Fastboot Flash Mode (S)".
On the Fastboot screen it reads:
downgraded security version
update gpt_main version failed
failed to hab check for gpt_backup: 0x35
failed to load GPT
CID Read Failure
Invalid CID status 0x69
No SP partition found
Fastboot Reason: Invalid GPT
I have tried using RSD Lite to go to 9.30, but it keeps failing (I may be doing something wrong...). If anyone could provide any help, it would be greatly appreciated!
** Solved **
Used bweN diorD's modded utility to reformat the GPT partitions, all is well.
http://forum.xda-developers.com/showpost.php?p=49376894&postcount=6
Hello everyone
I am new here.
I need some assistance with my moto g.
I previously unlocked my Moto G's bootloader but realised that I just wanted it on stock and locked so I didn't damage it, so I managed to relock my
phone's bootloader and got it back to a stock rom.
After installing a system update a few days ago, my phone came back with the
"Warning - bootloader unlocked!" logo after installing a system update.
So I decided to try and reflash the stock firmware and original logo.bin from the XDA Site.
However, my flashes are failing and my moto g is stuck in a bootloop with no rom to boot up to, I have adb minimal fastboot and motorola drivers
/ adb drivers installed.
What happens: I power on the phone into bootloader mode, then I try to flash the ROM I got from droid-developers site, but whenever I try to relock
my bootloader it shows the following:
...
Ready to flash signed images!
OK: (time)
I do fastboot flash partition gpt.bin and I get:
Preflash validation failed!
SST lock failure!
Also trying to issue the command to relock the bootloader gives me
SST lock failure!
I get other errors too when flashing the sparsechunk images, it gives: Invalid PIV signed image! and for motoboot and boot images it gives: Preflash validation failed!
version downgraded for boot.
etc
I cannot recover my stock rom due to these errors, I've searched everywhere (on google) and here and I am desperate to flash the stock rom back and relock bootloader again so I can use the phone.
I am really stuck and my phone will not get out of a bootloop
Any help is really much appreciated as I need to get my phone working so I can use it
You don't need to relock the bootloader. Just follow this tutorial:
http://forum.xda-developers.com/showthread.php?t=2542219
lost101 said:
You don't need to relock the bootloader. Just follow this tutorial:
http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
I followed the tutorial, but when I get to the flashing stage, I get:
Preflash validation failed,
SST lock failure!
And version downraded for gpt.bin
it seems to be failing to flash these files.
What do I need to do?
You need to provide more information for people to help you. Have you upgraded to 4.4.4?
I had a similar issue when rooting my phone, and all I had to do was unplug the phone from the computer, restart the phone and computer, and then try again.
GrammarNazi said:
I had a similar issue when rooting my phone, and all I had to do was unplug the phone from the computer, restart the phone and computer, and then try again.
Click to expand...
Click to collapse
But did you downgrade from 4.4.4 to 4.4.2?
What model do you have?
Can you explain us all the steps?
Thanks
First unlock your bootloader again. You have to downgrade from 4.4.4 to 4.4.3 then to 4.4.2. During the downgrades you have to follow the same kind of firmware (example: 4.4.4 retail EU -> 4.4.3 retail EU -> 4.4.2 retail EU). When you're done if you want you can relock the bootloader.
Hi, So I am trying to restore to factory firmware (Telus/Koodo) firmware and I keep getting this error:
Code:
error: cannot load 'system.img_sparsechunk.1 ': No Error
I get the error for all the sparsechunks. I'm not sure what to do. If this is any help My phone is unlocked status code 3. However, it is stuck in bootloop.
Thanks!
Canuckfan101 said:
Hi, So I am trying to restore to factory firmware (Telus/Koodo) firmware and I keep getting this error:
Code:
error: cannot load 'system.img_sparsechunk.1 ': No Error
I get the error for all the sparsechunks. I'm not sure what to do. If this is any help My phone is unlocked status code 3. However, it is stuck in bootloop.
Click to expand...
Click to collapse
What are the actual files you have downloaded called? It could be: system.img_sparsechunk1 - also flash them in order, system.img_sparsechunk0, system.img_sparsechunk1, system.img_sparsechunk2
Hi! Thanks for the reply! I checked the name and I did not enter it in correctly! It now works! But antoher problem has occured! I managed to lock the device ( i ended the program with fastboot oem lock) and the moto g said locked! in blue. I thought it got stuck so i pressed the power button. The warning unlocked bootloader still shows but the phone is Locked Status 2. The CMD prompt gave me this when I entered fastboot oem lock
Code:
...
FAILED (status read failed (too many links))
There are already numerous threads on the subject of 'fastboot oem lock failed' - I don't know why it fails.
This is one alternative solution:
http://forum.xda-developers.com/showthread.php?t=2548530
Hi
I have soft-bricked my Moto G 4G, as the title says. I decided to use the nandroid backup from my working Moto G 4G & flashed it to the one which has now since bricked. (kinda lazy XD)
Its also locked too -_- So i can flash signed motorolla img's but unsigned do not work. I have tried to find official 4.4.4 images but I've had no luck in flashing them. So now i get constant error messages when trying to flash the same system images, or boot.img to the system.
I have access to Fastboot & only Fastboot. The issues i have are:
When booting into fasboot i get:
Fastboot Reason: UTAG "bootmode" configured as fastboot.
When trying to unlock the bootloader, however i can get the unlock token by doing "fastboot oem get_unlock_data then paste that on the motorolla site.
But as soon as i type in fastboot oem unlock i get the following message:
fastboot <bootloader> oem unlock disabled!
I also get:
Invalid PIV signed system image
hab check failed for system
I can flash the following successfully:
gpt.bin
motoboot.img
logo logo.bin
fsg.mbn
NON-HLOS.bin
Because I've flashed the other system's rom to this phone, ALL the information under "Barcodes" is identical to that of my working phone. Even the fastboot code thats identical too. So even when i request a unlock token, sure it works, but the site thinks that its a call from my working phone so it gives out the incorrect unlock code, so thats why i think the unlock is disabled. Either way this is a really irritating situation, which i am having trouble trying to solve.
I wonder if I'm going to have to flash a blank flash to get it back to working state.
Hopefully if i can get the bootloader unlocked, id be back in business. :fingers-crossed:
Any help would be greatly appreciated.
Thanks
Hi,
I managed to install openkirin/omnirom a year ago on my honor6x but i want to sell the phone so i want to go back to the debranded india version (bln-l22)
i still have all the old tools and firmware, but somehow im getting an error when i try to reflash twrp with this guide https://forum.xda-developers.com/honor-6x/how-to/update-bln-l22c675-emui-5-x-x-to-emui-8-t3819317
However im stuck in adb on the 2nd step when i type "fastboot flash recovery twrp-3.1.1-0-berlin.img"
im getting "Writing 'recovery' FAILED (remote: 'partition length get error') fastboot: error: Command failed"
i cant really interpret this error. any pointers that i could try? or is there maybe even a tutorial on how to rollback from custom roms?
Thanks and Cheers