Related
The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin
The very first thing you have to do is to unlock your bootloader if you want root.
It's not possible for Moto G3 I think..
adsbhatial said:
The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin
Click to expand...
Click to collapse
i also have same problm plz help....
Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk
I am having the problem with link2sd app whenever I tried to integrate any app into system and reboot my device it completely remove that app from the device ......why its happening
Yousvel said:
The very first thing you have to do is to unlock your bootloader if you want root.
Click to expand...
Click to collapse
Ok.. I know about the whole process of rooting the MOTO G3 is .
I am asking if the SystemLess Root is working on MOTO G3 Marshmallow Update
I have seen some posts where MOTO G3 users have used the SystemLess Root on Lollipop.
sbsharma said:
Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Thanks for the Reply.
You weren't clear about whats working great.
Rooted MOTO G3 Marshmallow or SystemLess Root as It is also SuperSu v2.62
I told what you asked in bold letters.... systemless root (supersu 2.62)working great on marshmallow
sbsharma said:
Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Please verify WITH LINKS the following information:
Model:
Android Version:
TWRP Version:
SuperSU version:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.
Dom3616 said:
Please verify WITH LINKS the following information:
Model:
Android Version:
TWRP Version:
SuperSU version:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.
Click to expand...
Click to collapse
Xt1550 2gb
Android 6.0
2.8.7.0 r5
supersu 2.62 flashable zip
All links are on xda search them
Sent from my MotoG3 using Tapatalk
sbsharma said:
I told what you asked in bold letters.... systemless root (supersu 2.62)working great on marshmallow
Click to expand...
Click to collapse
Thanks For the Reply.
I asked two questions and you replied only to one or to Both.
It confused me.
But Thanks for the HELP.
My xender app does not work after this system update can u plss tell me y???? And wt is the soln
Dom3616 said:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.
Click to expand...
Click to collapse
Agree. And the procedures need to fill all the gaps of info that currently exist. For example, after unlocking bootloader, it would have been helpful to know that you need to reboot and let the system rebuild itself (which takes several minutes) before moving on to anything else such booting/flashing TWRP & rooting.
adsbhatial said:
The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin
Click to expand...
Click to collapse
First of all, Systemless Root is Available for MOTO G 3RD GEN.. Just Grab the zip.. No other zip will work except BETA-SuperSU-v2.62-3-20151211162651.zip..
Rooting moto g3 marshmallow
Can Anyone Provide me twrp recovery and systemless supersu for moto g3 marshmallow?
Has anyone had success installing superSu 2.76 systemless? I ask for this because I'm trying to install unoficial systemless xposed and it will only install systemless if supersu 2.76 is also flashed systemless (not updated via supersu app)
I managed, besides 2.62 beta, to get systemless root with CF-autoroot (2.74)
Persechini said:
Has anyone had success installing superSu 2.76 systemless? I ask for this because I'm trying to install unoficial systemless xposed and it will only install systemless if supersu 2.76 is also flashed systemless (not updated via supersu app)
I managed, besides 2.62 beta, to get systemless root with CF-autoroot (2.74)
Click to expand...
Click to collapse
So you didnt have to flash 2.62 ??? You just used the CF-AUTOROOT app to root ??
gregferns said:
So you didnt have to flash 2.62 ??? You just used the CF-AUTOROOT app to root ??
Click to expand...
Click to collapse
never, Never, NEVER EVER use a one-click root on the Moto G 3rd gen, it can and will brick it... we have seen tons of examples of it happening on Marshmallow. The rooting process has been refined and simplified and works on all stock Marshmallow ROMs...
1) Unlock bootloader
2) Boot TWRP and do a full backup and store it in a safe place (Seriously, do this... When you need it you will thank me)
2a) Flash TWRP (optional, but recommended)
3) Start TWRP by either fastboot or on the phone if you flashed it
4) Go to Advanced - Terminal
5) Enter `echo SYSTEMLESS=true>>/data/.supersu` press Enter and exit back to home
6) Flash latest stable or beta SuperSU zip
7) Reboot and enjoy root!
acejavelin said:
never, Never, NEVER EVER use a one-click root on the Moto G 3rd gen, it can and will brick it... we have seen tons of examples of it happening on Marshmallow. The rooting process has been refined and simplified and works on all stock Marshmallow ROMs...
1) Unlock bootloader
2) Boot TWRP and do a full backup and store it in a safe place (Seriously, do this... When you need it you will thank me)
2a) Flash TWRP (optional, but recommended)
3) Start TWRP by either fastboot or on the phone if you flashed it
4) Go to Advanced - Terminal
5) Enter `echo SYSTEMLESS=true>>/data/.supersu` press Enter and exit back to home
6) Flash latest stable or beta SuperSU zip
7) Reboot and enjoy root!
Click to expand...
Click to collapse
I never do auto rooting... I always follow the guides for any phone.... I was just enquiring of him if he had done it that way ????
As to your 2nd point I had done a TWRP of my stock rom for the merlin,,, and then like a dumbass i had kept it on my sd card (64gb ) which suddenly decided to die on me.... so i lost that...
Anyway,, when i try to put back my MOTO GTE to stock, i will flash the firmware and then try the systemless root,,, have never done that before..
thanks for the stepby step guide..
cheers
Greg
Hello All My Friends.
I want to Run XMOD but as you all know it does not works on UNROOTED devices.So i tried to root my device. I tried rooting my device with several methods BUT FAILED TO ROOT. Please check my steps below. Are They Correct ?
MY VERY FIRST METHOD
* I tried rooting with several apps like Framaroot, kingoroot, but I failed.
SECONDLY
* Then i found a thread on XDA for rooting by flashing SuperSU. Alright.
What i did was first i unlocked my Bootloader. (MY SCREEN IS SHOWING : Device Is Unlocked : Status Code 3)
Then i installed TWRP.
After that i Flashed 'UPDATE SuperSU v 2.46.zip'
After successful flashing MY PHONE STUCKED ON 'UNLOCKED BOOTLOADER WARNING LOGO'.
* i waited for more than 30 minutes but i failed.
THIRD METHOD
I also tried with this method.
Downloaded 'r2-motog-superboot' and connected my phone.
Typed this command superboot-windows.bat file.
PHONE RESTARTED BUT IT DID NOT ROOTED MY DEVICE. I checked with Root Checker App It Is Showing UNROOTED.
PLEASE PLEASE PLEASE HELP ME TO ROOT.
MY PHONE's O/S Is Android Marshmallow 6.0
I FLASHED MY PHONE WITH STOCK ROM I NOW MY DEVICE IS WORKING. BUT I WANT TO ROOT IT.
Flash SuperSU v 2.62 systemless root and than while reboot click on DO NOT ROOT msg in twrp....
Sent from my Toilet using Moto G3....
ifu said:
Flash SuperSU v 2.62 systemless root and than while reboot click on DO NOT ROOT msg in twrp....
Sent from my Toilet using Moto G3....
Click to expand...
Click to collapse
Hello Thanks For Replying. But Can U Tell Me In Detail. How to Flash SUPERSU SystemLess Root ? And When Will I Get DO NOT ROOT MEssage ?
First install SuperSU from https://drive.google.com/file/d/0B7XI4DjSTF85M1ZYUjR2aXpTa2c/view?usp=docslist_api
And than after installing when u will restart from TWRP u will get msg to install SuperSU just click DO NOT INSTAL and ur Mobile will be restarted....
ifu said:
First install SuperSU from https://drive.google.com/file/d/0B7XI4DjSTF85M1ZYUjR2aXpTa2c/view?usp=docslist_api
And than after installing when u will restart from TWRP u will get msg to install SuperSU just click DO NOT INSTAL and ur Mobile will be restarted....
Click to expand...
Click to collapse
Thanks For The Reply. Did Not Tried Your Method BUT I AM SUCCESSFUL TO ROOT MY MOTO G 3rd Gen With My OWN BRAIN... Will Soon Create A Thread HERE For ALL. How I Rooted , Installed Stock Firmware And Protected It From Bootloop.
pls tell how to root moto g3 6.0
AndroidTopGames said:
Thanks For The Reply. Did Not Tried Your Method BUT I AM SUCCESSFUL TO ROOT MY MOTO G 3rd Gen With My OWN BRAIN... Will Soon Create A Thread HERE For ALL. How I Rooted , Installed Stock Firmware And Protected It From Bootloop.
Click to expand...
Click to collapse
please help me.
pls tell how to root moto g3 6.0
landylogesh said:
please help me.
pls tell how to root moto g3 6.0
Click to expand...
Click to collapse
There's a thread in the general section relating on how to unlock bootloader , root and install twrp and also xposed if you like! Have a look! It's easy and the safest and yes it did work for me and therefore my suggestion! Cheers!
hi guys.....
i had recently unroot my moto g3 and install stock root to use my jio sim.
but i really miss the root access so, is there any way to root my stock unrooted rom to have root access.
when i flash supersu it will get stuck into bootlogo and will not proceed.
i waited for half an hr but no sign of booting up
anyone have a way to get root access to stock rom plzz help........
Sushilsingh said:
hi guys.....
i had recently unroot my moto g3 and install stock root to use my jio sim.
but i really miss the root access so, is there any way to root my stock unrooted rom to have root access.
when i flash supersu it will get stuck into bootlogo and will not proceed.
i waited for half an hr but no sign of booting up
anyone have a way to get root access to stock rom plzz help........
Click to expand...
Click to collapse
There are no less than 3 threads dedicated to rooting this device on Marshmallow that are tested and working... did all of them not work for you?
Yeah bro there is such kind of problem on rooting stock marshmallow ROM but I used kingroot v 4.8.2 for rooting if your bootloader is unlocked.
chirayu19091997 said:
Yeah bro there is such kind of problem on rooting stock marshmallow ROM but I used kingroot v 4.8.2 for rooting if your bootloader is unlocked.
Click to expand...
Click to collapse
Never use a one-click root method on a Moto unlocked device... Seen way to many bricked devices, always root manually.
It is easy to find, there is a thread in my signature.
acejavelin said:
There are no less than 3 threads dedicated to rooting this device on Marshmallow that are tested and working... did all of them not work for you?
Click to expand...
Click to collapse
I tried all 3 ways
nothing work out for me
Sushilsingh said:
I tried all 3 ways
nothing work out for me
Click to expand...
Click to collapse
If you have current SuperSU and TWRP, and use the echo command to create /data/.supersu it will work, if it isn't please go to thread in my signature and provide details including:
1) Device model and Android version
2) TWRP version
3) SuperSU version
4) Output of 'cat /data/.supersu' from TWRP terminal
And a copy of recovery.log if possible, without more specific information there is nothing that I can do to assist you.
EXPLANATION
Hello friends, I will tell you how to get a Root without bootlooping Lenovo P2 device. Looking at other methods, you can get root without any problem if it is a little longer.
FOOTNOTE
Remember to take a backup of your device in case of any problems.
My, OneTeam and XDA are not Responsible for Possible Problems.
Your device needs to be unlocked by OEM.
Your device must have TWRP installed.
ROOT LOADING INSTRUCTIONS
First of all download all the Files Needed from Below.
When the download is completed, all files are discarded.
Install Magisk Manager Application from the link below.
Install PhH's SuperUser Application when installation is finished.
Once the installation is done, start your device in TWRP mode.
Then load the zip files you downloaded from below.
Install Install / Magisk-v11.1_OneTeam.zip.
When the installation is complete, install the Install / SuperUser- R259_OneTeam.zip file.
Restart the device when installation is complete.
Your device will be root when your device is restarted.
DOWNLOAD LINK
Magisk Manager
phh's SuperUser
Magisk-v11.1_OneTeam.zip
superuser-r259_OneTeam.zip
Credit
@wzedlare
@kaankulahli
@DeftonesOT
There is already a guide to root with TWRP.
Would be great if you find way to root with exploit - without TWRP
pabgar said:
There is already a guide to root with TWRP.
Would be great if you find way to root with exploit - without TWRP
Click to expand...
Click to collapse
That guide causes bootloop on F2FS.This method also works on f2fs file system.
I have a problem with this guide though. When I install Magisk through TWRP, when it flashes boot, it gets stuck, screen goes black for a while, then the phone vibrates and shows blue notification LED.... Really don't know what that's about
ThomBwha said:
I have a problem with this guide though. When I install Magisk through TWRP, when it flashes boot, it gets stuck, screen goes black for a while, then the phone vibrates and shows blue notification LED.... Really don't know what that's about
Click to expand...
Click to collapse
Turn off the phone and try again. The black screen and blue led is QFIL mode
Does this method will break OTA updates feature? Sorry if i'm asking a newbie question. I want to root my P2 but at the same time want to get OTA update so this is why making me keep stock till now
kenji1996 said:
Does this method will break OTA updates feature? Sorry if i'm asking a newbie question. I want to root my P2 but at the same time want to get OTA update so this is why making me keep stock till now
Click to expand...
Click to collapse
I do not know, I did not try
Would this root work for the P2c72?
Laubscherc said:
Would this root work for the P2c72?
Click to expand...
Click to collapse
Worked P2a42 and P2c72
kenji1996 said:
Does this method will break OTA updates feature? Sorry if i'm asking a newbie question. I want to root my P2 but at the same time want to get OTA update so this is why making me keep stock till now
Click to expand...
Click to collapse
Shure it will
Is any of our (unfortunately only) few developers handling P2 working/trying to look for a method of rooting without unlocking bootloader?
spawnn617 said:
Is any of our (unfortunately only) few developers handling P2 working/trying to look for a method of rooting without unlocking bootloader?
Click to expand...
Click to collapse
Try Kingroot.
Do we need to unlock the bootloader and wait for 14 days to apply this root method ?
Please add it to this guide if so.
Thanks.
EDIT :
Your device needs to be unlocked by OEM.
Your device must have TWRP installed.
I didn't see it when I read the post for the first time. So we do have to wait 14 days before flashing TWRP.
ROOT LOADING INSTRUCTIONS
Click to expand...
Click to collapse
I simply flashed superuser-r259_OneTeam.zip, install phh's SuperUser and got root without Magisk.
@EypCnn
Sorry for reply on a months-old thread but, has anyone firgured out how to root and install custom roms without unlocking Bootloader? I got a Chinese unit and not having a Chinese number is huge roadblock for me. :/
Is it necessary to flash both supersu and magisk for rooting device?? Will the device get rooted if i flash only Supersu?
There is not a lot of Updates released by Lenovo for this model, so if it breaks the OTA, just download from here
bl00dsoaked said:
@EypCnn
Sorry for reply on a months-old thread but, has anyone firgured out how to root and install custom roms without unlocking Bootloader? I got a Chinese unit and not having a Chinese number is huge roadblock for me. :/
Click to expand...
Click to collapse
Without unlocking bootloader you cant do anything
Sent from my Lenovo P2 using XDA Labs
Will this method work with the S244 Nougat build?
I have a P2c72 model hardware which I bought from China, but it came loaded with P2a42 firmware which updated itself to Nougat S244 via OTA updates. I'm not sure how to root it and I'm currently in the 14 waiting period to unlock the bootloader!
EypCnn said:
EXPLANATION
Hello friends, I will tell you how to get a Root without bootlooping Lenovo P2 device. Looking at other methods, you can get root without any problem if it is a little longer.
FOOTNOTE
Remember to take a backup of your device in case of any problems.
My, OneTeam and XDA are not Responsible for Possible Problems.
Your device needs to be unlocked by OEM.
Your device must have TWRP installed.
ROOT LOADING INSTRUCTIONS
First of all download all the Files Needed from Below.
When the download is completed, all files are discarded.
Install Magisk Manager Application from the link below.
Install PhH's SuperUser Application when installation is finished.
Once the installation is done, start your device in TWRP mode.
Then load the zip files you downloaded from below.
Install Install / Magisk-v11.1_OneTeam.zip.
When the installation is complete, install the Install / SuperUser- R259_OneTeam.zip file.
Restart the device when installation is complete.
Your device will be root when your device is restarted.
DOWNLOAD LINK
Magisk Manager
phh's SuperUser
Magisk-v11.1_OneTeam.zip
superuser-r259_OneTeam.zip
Credit
@wzedlare
@kaankulahli
@DeftonesOT
Click to expand...
Click to collapse
Why upload zips with your name and not a link to the original developer.
View attachment 4312159
Sent from my Lenovo P2a42 using Tapatalk
I have successfully unlocked the bootloader my H83010i version.
I started down the path to root my device using H83010d tot file but stopped because I didn't know if when I upgrade to android 7.0 versions if I would lose root?
Therefore what is the easiest way to get to H83020f rooted?
How do I go from H83010i to H83020f and be rooted?
I have rooted a lot of samsung galaxy phones but this is my first LG so I am struggling a bit to understand how to upgrade. I assume if I do an OTA update it will install the latest version? I checked for system updates and it just said there is an update and to start downloading it but I don't know which update version that is?
Please advise.
Thanks in advance.
buyslake said:
I have successfully unlocked the bootloader my H83010i version.
I started down the path to root my device using H83010d tot file but stopped because I didn't know if when I upgrade to android 7.0 versions if I would lose root?
Therefore what is the easiest way to get to H83020f rooted?
How do I go from H83010i to H83020f and be rooted?
I have rooted a lot of samsung galaxy phones but this is my first LG so I am struggling a bit to understand how to upgrade. I assume if I do an OTA update it will install the latest version? I checked for system updates and it just said there is an update and to start downloading it but I don't know which update version that is?
Please advise.
Thanks in advance.
Click to expand...
Click to collapse
First of all, no need to use 10D tot file anymore. Download and install 20A kdz front autoprime located here:
https://forum.xda-developers.com/tmobile-lg-g5/development/stock-h830-20a-rom-flashable-zips-imgs-t3511294
Once that's installed, set up your system and then follow the following guide to get TWRP an root:
https://forum.xda-developers.com/tmobile-lg-g5/development/root-h830-running-30a-nougat-t3524322
After you have TWRP and root download the flashable 20F zip and install from TWRP (make sure to delete recovery from boot.p file after installing and also flash root). Here's the link to 20F:
https://forum.xda-developers.com/tmobile-lg-g5/development/stock-h830-20f-rom-flashable-zips-imgs-t3592855
If you follow all of that, you will be on stock 20F, rooted and with TWRP. After that, I recommend checking out the following custom kernel and installing that and using magisk instead of SuperSU. Kernel located here:
https://forum.xda-developers.com/tmobile-lg-g5/development/jan-17-2017-20c-deodexed-kernels-t3539611
Hopefully that helps, if you need more help just ask.
Thanks so much for taking the time to write me this great information. I have a question about the (make sure to delete recovery from boot.p file after installing and also flash root). ???????? Is this explained clearly somewhere? I don't know what I should do.
buyslake said:
Thanks so much for taking the time to write me this great information. I have a question about the (make sure to delete recovery from boot.p file after installing and also flash root). ???????? Is this explained clearly somewhere? I don't know what I should do.
Click to expand...
Click to collapse
After flashing the 20F version from TWRP, it creates a recovery from boot.p file in the system directory. If you don't delete this file before rebooting, you will lose TWRP. So, after doing the recowvery method to get root and TWRP and then after you flash the 20F from TWRP, after it's done flashing go to main menu of TWRP, click on mount, check system, go back to main menu, click advanced, click file manager and go-to system directory and click on the recovery from boot.p file and then delete. Now you can reboot without losing TWRP. Then you can flash SuperSU or magisk for root
Your Device software cannot be checked for corruption. Lock the bootloader
Thanks for the fast responses. After many hours of studying the posts and I finally got my LG G5 running on H830_20F_DeOdexed rom withh Asgard version 4.5 kernal and rooted with SuperSU v2.74.
However I keep getting the "your device software cannot be checked for corruption. lock the bootloader message upon starting up. see attachment
Does everyone get that message? Or is there a way to remove it?
I thought the Asgard kernal said it got rid of that?
buyslake said:
Thanks for the fast responses. After many hours of studying the posts and I finally got my LG G5 running on H830_20F_DeOdexed rom withh Asgard version 4.5 kernal and rooted with SuperSU v2.74.
However I keep getting the "your device software cannot be checked for corruption. lock the bootloader message upon starting up. see attachment
Does everyone get that message? Or is there a way to remove it?
I thought the Asgard kernal said it got rid of that?
Click to expand...
Click to collapse
You'll always have that message, no current way around it. Asgard kennel will allow you to pass safety net if you use magisk instead of SuperSU for root as it hides that the bootloader is unlocked from the system.
Where is Magisk?
jeffsga88 said:
You'll always have that message, no current way around it. Asgard kennel will allow you to pass safety net if you use magisk instead of SuperSU for root as it hides that the bootloader is unlocked from the system.
Click to expand...
Click to collapse
Are you saying that boot up message will not be there if I switch to Magisk?
I tried to find magisk but I was unable to locate the install file and instructions on how to change from SuperSU to magisk. Do you know the link to it?
buyslake said:
Are you saying that boot up message will not be there if I switch to Magisk?
I tried to find magisk but I was unable to locate the install file and instructions on how to change from SuperSU to magisk. Do you know the link to it?
Click to expand...
Click to collapse
No. I said currently there is no way to get rid of that message unless you lock the bootloader and you can't do that after modifying the system (i.e. installing TWRP and root). I said magisk will allow you to pass safety net. All that does is allow you to use apps that won't work with root / unlocked bootloader. If you don't use apps like Android pay or other apps that don't work when rooted, it really isn't necessary to switch from SuperSU to magisk. Anyways, if you're interested in magisk use Google (or XDA search) and search magisk XDA.