I finally got the message to update my phone to the andoid 6, after downloading and installing it rebooted and now hangs in the 'powered by android' screen. I cant get into the recovery menu, i did manage to get into download mode once but havent been able to do it again. I can't turn it off either, it just stays on.
I hope there is a way to fix myself, any tips are welcome!
forza11 said:
I finally got the message to update my phone to the andoid 6, after downloading and installing it rebooted and now hangs in the 'powered by android' screen. I cant get into the recovery menu, i did manage to get into download mode once but havent been able to do it again. I can't turn it off either, it just stays on.
I hope there is a way to fix myself, any tips are welcome!
Click to expand...
Click to collapse
One way you could fix your problem is to boot into recovery and factory data reset. Another option is to download ODIN and the firmware and flash. Otherwire Just using Smartswitch Emergency Mode on PC/MAC
Related
Hello, I will try to explain how I got myself into my current situation which is kinda helpless and it ends up with the SGS II Logo on screen.
I rooted my phone - no problem
Flashed an Insecure Kernel - no problem
Flashed - CWM - no problem
Then I tryed to put the Ressurecion ICS mode.
Started CWM mode, wiped all data but for some reason soon afterwards my phone
turned off. When I started it again it always ended up at samsung logo screen :/
I can put it in download mode. I tryed to flash roms, with or without pit files.
When I do so I get this screen like terminal with many signs like "failed to load booth catche" etc, unable to mount,etc. Then I get the option to either reboot,to wipe data catche or factory reset. No matter what I choose I always end up at logo screen. Please,I beg of you help me !!
SinisterHatred said:
Hello, I will try to explain how I got myself into my current situation which is kinda helpless and it ends up with the SGS II Logo on screen.
I rooted my phone - no problem
Flashed an Insecure Kernel - no problem
Flashed - CWM - no problem
Then I tryed to put the Ressurecion ICS mode.
Started CWM mode, wiped all data but for some reason soon afterwards my phone
turned off. When I started it again it always ended up at samsung logo screen :/
I can put it in download mode. I tryed to flash roms, with or without pit files.
When I do so I get this screen like terminal with many signs like "failed to load booth catche" etc, unable to mount,etc. Then I get the option to either reboot,to wipe data catche or factory reset. No matter what I choose I always end up at logo screen. Please,I beg of you help me !!
Click to expand...
Click to collapse
Have you tried returning it to stock with a one-click return to stock ? you will lose your root permissions but they are easy to get back lol
I havent tryed it. Isnt it just for nexus too ? And I cant enter my phone so I could just USB debugging :X
SinisterHatred said:
I havent tryed it. Isnt it just for nexus too ? And I cant enter my phone so I could just USB debugging :X
Click to expand...
Click to collapse
yea alot of samsung phones have one click return to stock
you just need to get it into download mode (probably by holding volume down and power at the same time then connecting ur usb i can provide links just PM me
Hi
i recently bricked my phone while updating from stock to phils cwm recovery and my cable unplugged. After that my phone went just dead. I read on the internet and used a OMAP flash and after that i could access my download mode, but it has a yellow exclamation mark triangle and has the android mascot with a 0 in it. I dont know what that means.
Now i some how managed to put a stock rom in it (Gingerbread). But it never switches on. I keep getting a blank screen, not even the samsung bot load symbol comes up. But when ever i use a pit file to just repartition the device my phone starts up and the gingerbread os switches on. But it keeps flashing that every process of google is being forced close, so i cant even move ahead. its just stuck there, and error keeps coming up with force close pop up.
If i try to restart the device it gets the blank screen again. it works again if i repartition it.
i even tried nand flash, but it gets stuck in odin after the message Erase.....
i tried adding a new recovery to no avail. Neither does a new Android OS gets pushed in, gets stuck at NAND write start.
The phone doesnt let me access recovery also. It gets the same blank screen when i try.
help please
cibrotron said:
Hi
i recently bricked my phone while updating from stock to phils cwm recovery and my cable unplugged. After that my phone went just dead. I read on the internet and used a OMAP flash and after that i could access my download mode, but it has a yellow exclamation mark triangle and has the android mascot with a 0 in it. I dont know what that means.
Now i some how managed to put a stock rom in it (Gingerbread). But it never switches on. I keep getting a blank screen, not even the samsung bot load symbol comes up. But when ever i use a pit file to just repartition the device my phone starts up and the gingerbread os switches on. But it keeps flashing that every process of google is being forced close, so i cant even move ahead. its just stuck there, and error keeps coming up with force close pop up.
If i try to restart the device it gets the blank screen again. it works again if i repartition it.
i even tried nand flash, but it gets stuck in odin after the message Erase.....
i tried adding a new recovery to no avail. Neither does a new Android OS gets pushed in, gets stuck at NAND write start.
The phone doesnt let me access recovery also. It gets the same blank screen when i try.
help please
Click to expand...
Click to collapse
Hmm ... after flashing a custom (PhilZ-cwm) recovery, the yellow triangle shows that you are no longer on official/stock firmware.
You can reset it with TriangleAway app from Chainfire.
If download mode still works, you can try to flash another (custom) kernel with a custom recovery. But it has to be a kernel which is compatible with your current ROM.
For further questions, please post in the Galaxy SII GT-I9100 G Q&A thread.
If you have issues with your download mode, check the [GUIDE] Fix an unflashable or soft bricked I9100G thread.
Thread closed ... thank you !
Last week I factory reset the tablet in the settings app (normally), it works fine before I factory reset, but after I did the factory reset, the tablet keeps on booting on the samsung logo then to a android with something working on his stomach then android robot with a exclaimation mark on its stomach. Its keep happening over and over again. At first I thought it was one of the procedure to reset, but then I keep doing it for an hour so I turned the device off. I tried to enter recovery mode, but I cant. The only mode I could get into is Download Mode. So I found this method using Odin to recover. But it wont work also. Tried all kind of Stock ROM still wont work. Ive tried one ROM that made the boot loop different, instead of loop with android stuff like before, it just stays on the samsung logo. I have a video to show you the problem that Ive been facing
***search "Samsung Galaxy Mega GT-I9200 reboot loop, no recovery menu" on youtube***
since I cant share link with you guys
In my case there is no "No Command" words at the screen.
Any suggestion on solving this?
Had it for 3 years now, it first looped in October 2017, broke all the sensors but has otherwise been working fine since. I also rooted it about 7 months ago in case that makes any difference with recovery. During both of these loops I have been unable to reliably get into recovery/download mode. I left it alone for an hour earlier today and came back to find that it was somehow in Odin/download mode with the text in the top left but still on the boot screen. So I plugged it into my computer, it was detected and then I flashed it with the correct G930T firmware and home csc. Got the success message in Odin and it seemed to be working but it was just stuck on the boot screen now. So now I've just been trying to flash it again with the other csc but it has been failing for a lot of different reasons and I don't know what any of them mean. I did manage to get it to power on a lot more reliably and into download mode, but still having problems. The biggest problem is when I get to either the download screen or warning screen, the screen suddenly gets all glitchy and I can't do anything. Whenever that happens it also shuts off after 10 seconds. This also happened on the Smart Switch emergency recovery screen when I cancelled a stalled flash and then tried to flash it again from that screen. I've also gotten errors when trying to flash from the download/boot screen. The ones I can remember are "unsupport dev_type", "secure check fail : tz eMMC write fail : tz" and "secure check fail : hyp eMMC write fail : hyp". I can't even find anything else on these errors and have no idea what they mean. I also have no idea how it is getting into Odin mode on the boot screen but so far that is the only way I have been able to do anything since I can't get into download mode the proper way. Lastly I tried to check in Smart Switch to recover it but it says the device is unsupported and there is nothing in emergency recovery.
Operation Ivy said:
Had it for 3 years now, it first looped in October 2017, broke all the sensors but has otherwise been working fine since. I also rooted it about 7 months ago in case that makes any difference with recovery. During both of these loops I have been unable to reliably get into recovery/download mode. I left it alone for an hour earlier today and came back to find that it was somehow in Odin/download mode with the text in the top left but still on the boot screen. So I plugged it into my computer, it was detected and then I flashed it with the correct G930T firmware and home csc. Got the success message in Odin and it seemed to be working but it was just stuck on the boot screen now. So now I've just been trying to flash it again with the other csc but it has been failing for a lot of different reasons and I don't know what any of them mean. I did manage to get it to power on a lot more reliably and into download mode, but still having problems. The biggest problem is when I get to either the download screen or warning screen, the screen suddenly gets all glitchy and I can't do anything. Whenever that happens it also shuts off after 10 seconds. This also happened on the Smart Switch emergency recovery screen when I cancelled a stalled flash and then tried to flash it again from that screen. I've also gotten errors when trying to flash from the download/boot screen. The ones I can remember are "unsupport dev_type", "secure check fail : tz eMMC write fail : tz" and "secure check fail : hyp eMMC write fail : hyp". I can't even find anything else on these errors and have no idea what they mean. I also have no idea how it is getting into Odin mode on the boot screen but so far that is the only way I have been able to do anything since I can't get into download mode the proper way. Lastly I tried to check in Smart Switch to recover it but it says the device is unsupported and there is nothing in emergency recovery.
Click to expand...
Click to collapse
When you flash with Odin tick "'re partition" in Odin options.
When "pass" appears disconnect phone from pc. Force reboot by holding home+volume down+power.
As soon as screen goes black press volume up while keeping home and power pressed. When recovery menu appears choose wipe / factory reset. Then reboot.
What is obviously very important is you are flashing the correct firmware for the device in the first place.
I unrooted my phone through Magisk Manager to get the Android 10 update, and I guess I missed a step. Because when my phone rebooted, it comes up with the "No Command" screen after showing the unlocked bootloader warning.
I am able to enter the recovery mode and all of those settings, but my phone wont boot normally. It doesn't even show the Motorola "M". If I leave it on for a bit, it will switch between the unlocked bootloader warning and the no command screen. I've already tried a factory reset but that does nothing.
Am I stuck with a broken phone, or is there another hope? I'll do my best to provide more info if needed. Please help!
Randomsamm said:
I unrooted my phone through Magisk Manager to get the Android 10 update, and I guess I missed a step. Because when my phone rebooted, it comes up with the "No Command" screen after showing the unlocked bootloader warning.
I am able to enter the recovery mode and all of those settings, but my phone wont boot normally. It doesn't even show the Motorola "M". If I leave it on for a bit, it will switch between the unlocked bootloader warning and the no command screen. I've already tried a factory reset but that does nothing.
Am I stuck with a broken phone, or is there another hope? I'll do my best to provide more info if needed. Please help!
Click to expand...
Click to collapse
What recovery u using I would look for orange fox and fastboot into that there is more things u can do if you don't want to save any thing I would reflash using orange fox recovery the rom u want I would use bliss or havoc I'm on now supper stable everything works and it's Android 10