Hello,
My mom has a polaroid tablet 7" model MID0714PCE07.141 which was doing an update but because she's totally noob in the android world, she stopped the update and switched off the tablet.
When she tried to turn on the next day, the tablet wont boot and stayed on the polaroid logo. So she gave it to me to repair it.
I tried to flash it directly on the SDcard with a rom I found on a french website (i'm from france) and it's the only rom I found exactly for this model.
The flash worked until the " update system " when the flash stops.
This is what I get :
- Find and check firmware
- Check parameter
- Update boot.img
- Check boot.img
- Update system
and the tablet constantly stops at this time. I can't go further. I can't flash with USB cable because my computer doesn't recognize the tablet, i get " " FAILURE request prescriber device "
can someone help me?
Hello and thank you for using XDA Assist,
please create a new thread here:
Android Q&A, Help & Troubleshooting
I hope there will be someone, who is able to help you.
Kind regards
Trafalgar Square
XDA Assist
Related
Hey, guys good afternoon. I have a Cubot Note S which I manage quite stupidly, to brick. The phone was rooted with KingRoot and I accidentally press to update to the latest software version from the Update Center of the phone and before it managed to complete, it showed an "ERROR" message. After that, I stuck into a boot loop. I've been searching the internet for a stock firmware of the phone in a .zip file because the Cubot has something like a stock Recovery mode, which I can boot to, to factory reset my phone, to boot into bootloader or apply an update through an sdcard etc. So far I only found a rom on needrom and it is in .rar and has many other irrelevant files in it. It has instructions below how to perform a clean flash of the ROM, but something goes wrong at the process. Either the SP-DMT (Flash Tool) doesn't work properly or my computer doesn't recognize my phone and I can't find the proper drivers for it. Has anyone ever been in this situation before with a chinese phone? Please help out with this because the cell phone belongs to a dear friend of mine and I can't afford to buy a new one these days. Thank you in advance.
Hello and thank you for using XDA Assist,
please create a thread here:
Android Q&A, Help & Troubleshooting
Kind regards
Trafalgar Square
XDA Assist
Hi,
I would like to thank you all beforehand, I am a long time user of the forum but this is my first post.
I was removing some malware from a chinese tablet (3nstar model mt83x2_mz101) and accidentally renamed one of the system folders.
I did not installed custom recovery (I know, big mistake ...) and now the tablet is stuck on a boot loop.
So far I can only enter stock recovery and some kind of test mode but I was unable to find any fastboot mode.
I would really appreciate if someone can help me on what can I do or if there is any way to install either CWM or TWRP from stock recovery on this tablet.
Thanks a lot!
Hello and thank you for using XDA Assist,
please create a new thread here:
Android Q&A, Help & Troubleshooting
There should be someone, who is able to help you.
Kind regards
Trafalgar Square
XDA Assist
Good evening .. I am the owner of a Asus Fonepad 8 K016 Italian ... Unfortunately some days I locked the tablet on the black startup screen with the word asus ... freezes completely and restarts after about a minute .... I entered recovery with volume + and power button and entering the droidboot me immediately appear
and : unable to open debricking
E: unable to open pos_enable
fastboot init
fastboot cmd waiting
From here I have downloaded the latest firmware version asus ww from here https://www.asus.com/support/Download/28/7/0/11/lu33bRUQAkh5xmHg/32/ but unfortunately when I put it on the sd card and droidboot I sd download the above entries you add these :
and : no detected /sdcard/asus_bundle.zip files !
installing demo content !!
no detect apd image file , skip !
error : can not find image files
How can I fix ? there is a way to re-install everything? Clearly I have already tried to do a factory reset , but nothing has changed .... Thank you for the answers
Hello and thank you for using XDA Assist,
please create an account ask in our Q&A section:
Android Q&A, Help & Troubleshooting
The experts there know the best and should be able to help you!
Kind regards and good luck
Trafalgar Square
XDA Assist
Thank you...
Thread closed.
Hello all,
I've been a real numpty and managed to brick my phone whilst attempting a ROM flash.
It started when the phone began to display annoying pop-up ads and pre-installed apps without asking me first! Over time it started getting worst and worst to the point I would get 4-5 pop-up ads within an hour.
I tried to root the phone and flash with a ROM, using an app I discovered on the Google Market. Unfortunately now whenever I try to start the phone, it boots the "Lenovo" logo and ends up in a continuous reboot loop.
I've accessed the boot menu and attempted to install the "update package" via the SD card. Unfortunately it continually gives me a failure, I have tried countless ROMS and a stock ROM.
Also my laptops don't find the device when plugged in. No Auto-Play pop up, and nothing shows up on Device Manager I've tried different cables and can't find a solution.
Is anybody able to offer some advice? This is the 2GB Lenovo A936.
Help is greatly appreciated!
Hello and thank you for using XDA Assist,
please create an account and ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Hello everyone!
I accquired this phone froma chinese online shop (the third one) and i want to change the chinese rom to euro firmware.
The problem resides in that when i changed the rom following the instructions of this forum in the other 2 previous phones i got it was everything alright and worked correctly, but with this last one i can't even make miflash/qlifil recognise Qualcom Com port. Now i only get at miflash the phone recognised with this weird name: b65bc2d5 . I'm affraid to try flashing because i didn't see anyone who got that name on the program and i don't want to get a brick. Also i tried to change the rom by sdcard with fastboot using the same file i used to install the other 2 phone that worked but it still says that the phone is Z90-7 and it wont take the installation file ( it's the second file on boycracked stock official lenovo vibe shot rom page). The thing is that when you upgrade to eu rom the phone model changes to Z90a40 and takes that rom, but not this last one.
I installed all the drivers manually because the phone on vendor mode can't install them itself (vol up + power button and then plug to the pc).
The version of chinese rom is android 6.0.1.
I hope this info will make someone know the solution because i don't.
Thanks and regards.
P.D: Now i'm triying to plug and detect but can't even do miflash detects it.
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist