Since a while I am having an issue which I cannot explain nor solve. When I make a call in my car, with bluetooth connected, suddenly the call shifts from bluetooth to the phone. Withing the call app, I can shift back to speakerphone and then back to bluetooth, but after a while teh same happens. I am on CM12S, rooted, xposed installed.
Are there any known apps causing such issue? Can this be linked to profile changes?
I am sure it is not the carkit as I had the same in a different car.
Related
Not sure if I'm missing a setting or not, but I've noticed that my Fuze doesn't automatically connect to my bluetooth headsets. I'm not sure if it ever did or not.
Even if I have the headset on, I usually have to go into BT and manually set a headset as hands-free or wireless stereo.
Anyone else have this problem?
I'm using ROMeOS.
This does happen to me on occassion. It depends on how many profiles you have setup. I deleted mine and only setup one. Then every morning i voice command it to be sure its connected and i have audio. A little frustrating but this seems to be wm6.1 issue. Possibly a bug?
I have no problem at all with my Motorola S9.
Same here
I agree. Actually, my BTheadset is connecting well when calling (it would be nice if it would do it faster brw) but yeah... wireless stereo needs always to be set manually which is horrible... especially when driving a car i need to take out the stylus to initiate stereo and maybe listen to the music after I crashed my car because of hands-free driving. I think this is not a problem of configutartion, it is just a bug. Any CABs/tweaks/hacks would be appreciated to have....
Any help?
I have the same problem using AT&T stock ROM and Sony wireless stereo headset. Any solutions?
Under Settings > Connections > Beam, make sure "receive all incoming beams" is checked. That fixed my problem on every ROM I've used.
I'm on CM7 ALPHA 3 with sound_fix_update.zip installed to make my jawbone bt work and Wifi-Calling_Patch_v1.0.5.zip to get the wifi calling to work. The CM7 has a problem with sound through bluetooth so after installing the patch the sound worked perfectly for calls (not for media, but I can live with that for now). However, after installing the wifi-calling patch when I'm trying to use wifi-calling the sound gets routed to the handset and doesn't come through the bluetooth. when the call first initiates I can hear it for a sec on the bluetooth and then it immediately gets routed to the handset. I checked with regular headphones it doesn't even work with that either. When wifi-calling is off however, I'm able to use my bluetooth as normal for calls. Anyone have any ideas?
I have my phone setup with my car and quality is great, but i can't figure out how to set the phone to auto switch to a bluetooth device for all calls once it's connected. Is there a way to do this?
My calls go to my bluetooth headset when the headset is already connected. My issue is that the phone doesn't automatically connect to the headset upon power on/boot up. This is the first phone I've had that does this and I don't like it.
NFC Tags!
It should be automatic, I think (or at least, in the BT devices settings). If not, try Tasker,
Rolo42 said:
My calls go to my bluetooth headset when the headset is already connected. My issue is that the phone doesn't automatically connect to the headset upon power on/boot up. This is the first phone I've had that does this and I don't like it.
Click to expand...
Click to collapse
I don't get it. My phone auto connects for me. Did it with the tunelink in my car today and the past few weeks, did it for 4 days with my friends ford car with sync and does it at work with many different devices when I get near them.
Sent from my SCH-I535 using xda app-developers app
I'm not sure I 100% get what you want. Are you saying you get the BT connection in your car but it won't send the calls to it? Your phone rings instead?
I can tell when my phone locks into my car's BT because the screen in my car indicates it. All calls then get redirected to the car's system.
My phone automatically connects when I start my car. Calls that I pickup with my steering will buttons route through to bluetooth. All that is fine. My problem is making outgoing calls. I have a feedback dial that is a pain to dial from. I like using the 1 touch calling on my phone much more - except when I dial through the phone, it never pushes to bluetooth. After connecting, I can switch to bluetooth, but I have to manually use the touchscreen to get it going. Is there any way that it can auto connect using bluetooth when I dial from my phone?
Weird, my phone automatically uses bluetooth even when I dial my from my phone. This is true for both my car's bluetooth and my bluetooth headphones. Maybe it's a setting in your car?
dukemagic said:
Weird, my phone automatically uses bluetooth even when I dial my from my phone. This is true for both my car's bluetooth and my bluetooth headphones. Maybe it's a setting in your car?
Click to expand...
Click to collapse
Did you check through the phone settings? I think there are some bluetooth settings in there.
Problem: Whenever I enable my wifi hotspot it causes my bluetooth audio to fail after approximately 5 min.
Example: In the car on car audio talking. Now enable to the hotspot for a wifi device (both services running on my phone at the same time). It works fine for a few min but then my I suddenly can't hear the person on the other end of the bluetooth call.
Troubleshooting:
1. If I turn off the wifi hotspot, the bluetooth audio will reconnect after about a min and I can hear the caller again.
2. If I have a bluetooth call going, the call does not drop. The other person is still there but just I can't hear them, they continue to hear me talking the whole time. The bluetooth devices stays connected - only the audio in is lost while audio out continues to work normally.
3. I have reprovisioned my phone with a new stock rom and tried it from a clean install before loading any third party apps and I get the same thing.
Phone specs
HTC Amaze, stock rom, android 4.0.3
Admittedly, I have not experimented with other blutooth devices only the connection to my car audio. The problem could be with my car bluetooth but I have never had connection issues with the car audio connected to any other bluetooth device.
I read an article that wifi and bluetooth can interfere with one another. But this only happens when both services are enable on the same phone (My HTC Amaze) at the same time. Wierd and frustrating because I have to kill my hotspot if I am going to receive a call and use bluetooth.
dpicella said:
Problem: Whenever I enable my wifi hotspot it causes my bluetooth audio to fail after approximately 5 min.
Example: In the car on car audio talking. Now enable to the hotspot for a wifi device (both services running on my phone at the same time). It works fine for a few min but then my I suddenly can't hear the person on the other end of the bluetooth call.
Troubleshooting:
1. If I turn off the wifi hotspot, the bluetooth audio will reconnect after about a min and I can hear the caller again.
2. If I have a bluetooth call going, the call does not drop. The other person is still there but just I can't hear them, they continue to hear me talking the whole time. The bluetooth devices stays connected - only the audio in is lost while audio out continues to work normally.
3. I have reprovisioned my phone with a new stock rom and tried it from a clean install before loading any third party apps and I get the same thing.
Phone specs
HTC Amaze, stock rom, android 4.0.3
Admittedly, I have not experimented with other blutooth devices only the connection to my car audio. The problem could be with my car bluetooth but I have never had connection issues with the car audio connected to any other bluetooth device.
I read an article that wifi and bluetooth can interfere with one another. But this only happens when both services are enable on the same phone (My HTC Amaze) at the same time. Wierd and frustrating because I have to kill my hotspot if I am going to receive a call and use bluetooth.
Click to expand...
Click to collapse
may try a new bt device
I am having issues figuring out how to best manage bluetooth on my device.
I use a bluetooth headset, and separate bluetooth headphones.
I am having the following problems:
1. If I am on a call and my headphones are on lying on my desk from an earlier music session, when I answer the call it goes to headphones. Thats OK, but sometimes I just want to speak on the phone. So I hit the bluetooth icon on my call screen to just speak into the handset. This works but after a few seconds it automatically keeps connecting unless I turn off the headphones. Is there any way to keep this from happening other than switching it off (which sometimes is a pain since it may be packed away in a bag, etc.)
2. Similar problem except between bluetooth devices. The call may get answered by my headset, and then during the call it ends up switching to the headphones. Is there any way to prioritize between two different bluetooth audio devices that are both connected in terms of which one you prefer to handle the phone calls?
Thanks.