[Completed] Download Mode Loop - XDA Assist

Hi there, I searched the forum. I found this thread whit my same problem:
http://forum.xda-developers.com/showthread.php?t=1837841
The guy ended up sending it to a technician.
The case: LG L20 D105F (Brazil Dual Sim)
Did Factory reset, phone initialized like new every time it was turned on, and calls weren´t working. Service was active sometimes.
Tried to flash original stock rom with LgFlashtool, but it gave me a network error and I interrupted the flashing process, without knowing that the righ thing to do is let the software finish ignoring the message.
Now it's in loop of ten seconds of download mode (when usb connected) turns off abd in one minute starts again in download mode and so.
Ideas?

TheTyper said:
Hi there, I searched the forum. I found this thread whit my same problem:
http://forum.xda-developers.com/showthread.php?t=1837841
The guy ended up sending it to a technician.
The case: LG L20 D105F (Brazil Dual Sim)
Did Factory reset, phone initialized like new every time it was turned on, and calls weren´t working. Service was active sometimes.
Tried to flash original stock rom with LgFlashtool, but it gave me a network error and I interrupted the flashing process, without knowing that the righ thing to do is let the software finish ignoring the message.
Now it's in loop of ten seconds of download mode (when usb connected) turns off abd in one minute starts again in download mode and so.
Ideas?
Click to expand...
Click to collapse
Edit: Solved removing battery and connecting to PC. Because in dowload mode battery doesn' charge. Hope it helps someone else.

Related

My Galaxy Tab 7.0 plus (GT-6200) suddenly died, help please!

The unit has been used for about 2 months and remains quite new. It was quite stable before. Yesterday night, about half an hour after plugged in for charging and with WiFi Hotspot turned on for sharing 3G data to another netbook, the unit suddenly rebooted itself. It then stopped at the start-up screen and remained there for several minutes. I kept holding the power button for a few seconds to turn it off but it then automatically reboot itself afterwards, and stopped at the start-up screen again. It means that even complete turning off is not possible.
Trying to enter into recovery mode showed the following few lines:
# MANUAL MODE #
-- Updating application...
Copying Common Apks.
Click to expand...
Click to collapse
and then it automatically rebooted again. It means that it can't enter into recovery mode normally.
It was possible to enter into download mode. And it was the first time this machine went into download mode. I run Odin Downloader and flashed the official stock ROM. After showing "Pass", the device rebooted itself. Unfortunately, it still stopped at the start-up screen, just showing "Samsung Galaxy Tab 7.0 plus". It is really troubesome. I have experience playing several Android devices before and it is the first time I face such troublesome problem.
The device is an official product. The biggest problem is that the original purchase invoice was lost and most likely that I couldn't get official support, repair service or replacement.
May I ask if anyone would kindly provide me some help or advice. Thanks!
Instead of going into download mode go into recovery mode and see if there are any errors. Your scenario is sounding very similar to the one I had in the past.
I just ran into a nasty snag at boot logo as well. nandroid, stock kernel and factory reset were no help. Try Odin back to Stock, it still may not get past boot logo, hold vol up and power to get into recovery and factory reset. Hope it works for you.
Unfortunately I was unable to get into recovery mode even after odin flashing stock ROM.
It rebooted itself a few seconds after displaying some lines of text. I can't see the normal recovery menu.

[SOLVED] [Q] GT-P5113 Reboot Loop Plz Help

I ended up sending this to Samsung for repair. Luckily my tab was still under warranty. It took them 3 times to finally get it fixed correctly. First time they replaced the main board and the data link cable plug. When I got it back it lasted about an hour before it started doing the reboot loop again. So I sent it back and that time that did a software upgrade, but they obviously didn't even test it before sending it back cuz it only lasted 30 min. then it started with the reboot loop. Before I sent it back for the 3rd time I got in contact with a manager cuz I was so frustrated at this point. That time I sent the tablet directly to her to make sure it was fixed and tested before sending it back to me. I've had it for about 2 weeks now with no problems. They replaced the main board again. So either they gave me a faulty one the first time they "fixed" it or they didn't do anything to it.
So if your tab is stuck in the reboot loop and there's nothing you can do to make it stop, contact Samsung.
I bought this about 2 weeks ago and got to use it for about 5 days.
Woke up in the middle of the night cuz I kept hearing the start up sound to my tablet. So what it does is starts up then I get a prompt saying "Unfortunately, the process com.google.process.gapps has stopped" I click ok and then another prompt that says "Unfortunately, Goole+ has stopped" with the choice of clicking "Report" of "Ok" then the screen freezes and it all starts again.
So I have about 3 - 5 seconds after it starts up and I've tried going in and doing a system restore but it crashes before I can do that. I have manged to go in and delete my google account but when it restarts my account is back.
So then I tried using the Odin3 program with every different file that I could find that would be compatible with my tab and it shows that it installs fine but nothing ever changes on the tab it self. I have tried using the Pit file and the stock rom, the stock rom alone, the pit file alone, twrp open recovery, clockwork open recovery, CF Auto Root, but no luck. I have tried having the auto reboot on and off and then rebooting it myself, still no change.
When I go into recovery mode it shows the android with a red triangle. and of course if I try to install anything from there it always does the signature fail. Which I'm guessing cuz it's not rooted. So at this point I am wondering is there a way to just completely wipe everything off and start completely over? I have wasted so much time on this POS I'm about to just throw it away. Any advice would be more greatly appreciated.
Thank you.
GT-P5100
Hi Im a new member. Im have the same trouble also.
there is an endless restart cycle, and my tablet can last only for around 10 to 15 seconds power on then it will restart again and repeat the process until the battery die.
I can only power off if i connect to the power supply.
I already tried ODIN with several stock PDA files, root with CWM and philtouch, but nothing happens. Everything is passed but there is no change on the about devices after the reboot. Then it continue the endless restart again.
When i boot in original recovery, there is an error already. if i flash zip file root, there is an error in signature.
Please help me brothers and sisters.
Any luck figuring this problem out?
OSANG said:
Hi Im a new member. Im have the same trouble also.
there is an endless restart cycle, and my tablet can last only for around 10 to 15 seconds power on then it will restart again and repeat the process until the battery die.
I can only power off if i connect to the power supply.
I already tried ODIN with several stock PDA files, root with CWM and philtouch, but nothing happens. Everything is passed but there is no change on the about devices after the reboot. Then it continue the endless restart again.
When i boot in original recovery, there is an error already. if i flash zip file root, there is an error in signature.
Please help me brothers and sisters.
Click to expand...
Click to collapse
Have you had any luck fixing this problem?
OSANG said:
Hi Im a new member. Im have the same trouble also.
there is an endless restart cycle, and my tablet can last only for around 10 to 15 seconds power on then it will restart again and repeat the process until the battery die.
I can only power off if i connect to the power supply.
I already tried ODIN with several stock PDA files, root with CWM and philtouch, but nothing happens. Everything is passed but there is no change on the about devices after the reboot. Then it continue the endless restart again.
When i boot in original recovery, there is an error already. if i flash zip file root, there is an error in signature.
Please help me brothers and sisters.
Click to expand...
Click to collapse
Same Problem with me, for me it says USB device is not recognized and I cannot sent anything from my computer now. Totally Stuck with this stupid thing.

n9006 bricked and MMC deleted

Hello guys,
I'm here for the first time and I would like to hear your opinions on what to do with my N9006 mt6589 which has been bricked. I'll explain what happened. While I was using my phone normally it started to have a strange behaviour, error notifications popped up, couldn't write messages and then suddenly it shut down. Tried to charge it, and still couldn't turn it on. As my battery was weak I changed it and thought that problem will be solved. When I inserted new battery, my phone was still dead. No LED when chargin, no light when pressing Power button, nothing, completely dead. I knew that it was hard bricked. As I'm not a newbie in android world, I managed to install drivers and to make it discoverable by PC as MediaTek Preloader...Only thing that I knew about this clone is model SM-N9006 which is appearing while turning it on (on sticker under battery I have N9002, however I searched for N9006 ROMs to flash on). I don't know any other info about this phone as I recieved it as gift few months ago and I didn't modified anything on it. Don't have back-up. After trying to flash about 20 ROMs I found one which worked for me. But, my problem does not stop here. My phone turned on but stayed awake for few seconds than suddenly shut down again. I entered in Factory Mode which has all chinese words and managed to delete eMMC!!! Oh yes, I made that terrible mistake. Now I'm unable to turn it on again. In CWM eMMC is not mounting, as well as data, system and cache. MTK Droid Tool discovered my phone and I got informations that you can see in attached picture INFO.jpg.
After that I realized that my phone model is A202_mula_64 which I think stands for N9006 MAX. However I didn't succeded in unbricking my phone because no ROM works as I deleted MMC. With this iBaby888 ROM installed on phone now when I check Info in Factory Mode I recieve info that you can see in attached picture PB180003.jpg
Can anyone tell me what to do now? Which ROM to flash and how to repartition MMC and sd-ext??? Do you think that MTK Droid Tool is reliable and discovers right info? If yes, then I have n9006 Max = A202_mula_64.
Sorry for such a long post but I need your help urgently.
PS. Forgot to mention that my phone is dual sim and I can access CWM.
Your help is highly appreciated!!! Best!
Any ideas on what to do guys??

[Completed] Retrieve Data from Bricked S3

Hi There,
Firstly I do apologize if this has already been posted, but I have searched through the forums and have not been able to find any specific information about this particular problem.
I have a Galaxy S3 (purchased in 2012) and a few weeks ago, the phone started to automatically switch off (when I locked it) and I would have to hold the power button for about 15-30 seconds for it to switch back on.
I checked the power button(to see if it was broken and pressing down all the time) but it seemed to be fine as whenever I pulled the battery (and put it back in after 1 minute) the phone would NOT come on unless I held the power button.
Also tried replacing the battery, but that did not seem to work.
About 1 week ago when i tried to turn my phone on, with the power button, but it would get stuck on the samsung logo screen (it was frozen, not looping).
I was still able to enter both recovery and download mode. So I tried wiping the cache but it did nothing.
Then I tired flashing the ROM with ODIN and it passed but it also did nothing (tried flashing multiple times all with "PASS" as well as wiping the data cache in conjuction with the flashing but to no avail).
Tried flashing it again with BL and it also passed, but now whenever I try to enter Recovery Mode or Turn the phone ON it would display a White Scrambled Screen which probably means eMMC failure.
Now for the problem:
How do I retrieve the information on the phone ?
N.B;
- I do not care about fixing the phone, only want the information
-I cannot enter Recovery Mode, BUT I can enter download mode.
-When I connect S3 to PC it is detected (In Device Manager it states "Samsung Mobile USB CDC Composite Device")
-I did have my phone password protected before this happened using the Pattern Password (you have a 3x3 Dot grid in which you can use to draw a line(s) which will function as a password)
-My phone is an S3 GT-I9300
-Never interfered with the ROM or software on the phone before this (was running the official android software from Samsung which I believe was Android Version 4.3).
-Have Tried EaseUs, but it does not detect the phone.
bossman111 said:
Hi There,
Firstly I do apologize if this has already been posted, but I have searched through the forums and have not been able to find any specific information about this particular problem.
I have a Galaxy S3 (purchased in 2012) and a few weeks ago, the phone started to automatically switch off (when I locked it) and I would have to hold the power button for about 15-30 seconds for it to switch back on.
I checked the power button(to see if it was broken and pressing down all the time) but it seemed to be fine as whenever I pulled the battery (and put it back in after 1 minute) the phone would NOT come on unless I held the power button.
Also tried replacing the battery, but that did not seem to work.
About 1 week ago when i tried to turn my phone on, with the power button, but it would get stuck on the samsung logo screen (it was frozen, not looping).
I was still able to enter both recovery and download mode. So I tried wiping the cache but it did nothing.
Then I tired flashing the ROM with ODIN and it passed but it also did nothing (tried flashing multiple times all with "PASS" as well as wiping the data cache in conjuction with the flashing but to no avail).
Tried flashing it again with BL and it also passed, but now whenever I try to enter Recovery Mode or Turn the phone ON it would display a White Scrambled Screen which probably means eMMC failure.
Now for the problem:
How do I retrieve the information on the phone ?
N.B;
- I do not care about fixing the phone, only want the information
-I cannot enter Recovery Mode, BUT I can enter download mode.
-When I connect S3 to PC it is detected (In Device Manager it states "Samsung Mobile USB CDC Composite Device")
-I did have my phone password protected before this happened using the Pattern Password (you have a 3x3 Dot grid in which you can use to draw a line(s) which will function as a password)
-My phone is an S3 GT-I9300
-Never interfered with the ROM or software on the phone before this (was running the official android software from Samsung which I believe was Android Version 4.3).
-Have Tried EaseUs, but it does not detect the phone.
Click to expand...
Click to collapse
Hello, the best solution will be to ask here Galaxy S III Q&A, Help & Troubleshooting since that guys know more about mentioned device.
Thank you
Paget96 said:
Hello, the best solution will be to ask here Galaxy S III Q&A, Help & Troubleshooting since that guys know more about mentioned device.
Thank you
Click to expand...
Click to collapse
Hi There Krusevac,
Thanks for the reply.
I will check it out.
Kind Regards,
B
bossman111 said:
Hi There Krusevac,
Thanks for the reply.
I will check it out.
Kind Regards,
B
Click to expand...
Click to collapse
No problem
Sent from my Nexus 5 using Tapatalk

android mobile directly goes into recovery mode on startup

hi everyone. I have a china android mobile (VGO TEL VENTURE V 7). I was getting the error process com.android.systemui has stopped working. I tried everything to remove this error but no success.
So in the end i decided to again flash the ROM ( i have this mobiles ROM and i have flashed it before). this time when i flashed it and restarted device, it displayed vgo tel logo, screen remained on then turned off and then after few seconds it turned on and mobile went into recovery mode. Each time i turn on device this happens. there is no fault with hardware i have checked it.
I have the video link of what happens, recorded through laptop camera. since i am new so link posting isn't allowed for me. but i can send you the link if you want it...

Categories

Resources