Hi guys, I updated the @AhmadRkein 's stock kernel patch for TW to latest OJ3 base.
Working: all
Not working: you should tell me
Instructions:
1. Flash Kernel_Script_Cleaning_by_Slim80_v1.9_LL.zip through recovery
2. Flash Stock_Kernel_with_Patch_OJ3.zip always through recovery.
Download:
Kernel Script Cleaning - https://mega.nz/#!yAlRUCzQ!8_K87y6S9o9EvkspVddhqPys6UsiwzSYcL3UEkniyvU
Stock OJ3 Kernel with Patch - https://mega.nz/#!nN9XWS4T!8jbY_lP47-jcvMP0ttPWY6jSD8E1QALjWF2Rejq2iSo
BLCK_GHST said:
Hi guys, I updated the @AhmadRkein 's stock kernel patch for TW to latest OJ3 base.
Working: all
Not working: you should tell me
Instructions:
1. Flash Kernel_Script_Cleaning_by_Slim80_v1.9_LL.zip through recovery
2. Flash Stock_Kernel_with_Patch_OJ3.zip always through recovery.
Download:
Kernel Script Cleaning - https://mega.nz/#!yAlRUCzQ!8_K87y6S9o9EvkspVddhqPys6UsiwzSYcL3UEkniyvU
Stock OJ3 Kernel with Patch - https://mega.nz/#!nN9XWS4T!8jbY_lP47-jcvMP0ttPWY6jSD8E1QALjWF2Rejq2iSo
Click to expand...
Click to collapse
... and anything goes better - battery life especially ?
dwarcholik said:
... and anything goes better - battery life especially ?
Click to expand...
Click to collapse
I can't tell you if it's better, but most probably isn't worse :good:
BLCK_GHST said:
I can't tell you if it's better, but most probably isn't worse :good:
Click to expand...
Click to collapse
What is changed in this version? I would try it, but it's stable?
@ndry said:
What is changed in this version? I would try it, but it's stable?
Click to expand...
Click to collapse
It is pratically the stock I9515 firmware's kernel so same battery and performance of the stock OJ3 (they also depend by the ROM).
Inviato dal mio GT-I9505 utilizzando Tapatalk
BLCK_GHST said:
It is pratically the stock I9515 firmware's kernel so same battery and performance of the stock OJ3 (they also depend by the ROM).
Inviato dal mio GT-I9505 utilizzando Tapatalk
Click to expand...
Click to collapse
Ok thanks I will try it
Edit: I've just flashed with imperium v11 but WiFi don't work , Bluetooth ecc works
I've tried also to wipe cache and dalvik but nothing
It is possible to you to compile for the i9515L?
Enviado desde mi GT-I9515L mediante Tapatalk
patriciogac said:
It is possible to you to compile for the i9515L?
Enviado desde mi GT-I9515L mediante Tapatalk
Click to expand...
Click to collapse
https://plus.google.com/communities/102532721139283823393
You can find everything here!!!!
So why the WiFi don't work ? The other thing all works.
@ndry said:
So why the WiFi don't work ? The other thing all works.
Click to expand...
Click to collapse
Try to flash a newer modem
Inviato dal mio GT-I9505 utilizzando Tapatalk
BLCK_GHST said:
Try to flash a newer modem
Inviato dal mio GT-I9505 utilizzando Tapatalk
Click to expand...
Click to collapse
Sorry..but is there any way I could flash the modem via recovery?
I flashed albe95 s6 port with ur kernel script then the patch
Everything except WiFi works
Can u pls help me?
And can u pls link me the modem?
I'll b waiting?
marco978 said:
Sorry..but is there any way I could flash the modem via recovery?
I flashed albe95 s6 port with ur kernel script then the patch
Everything except WiFi works
Can u pls help me?
And can u pls link me the modem?
I'll b waiting
Click to expand...
Click to collapse
here you are: https://mega.nz/#!mBUBVTJb!uNN4fG8GVjl4HXUnYYiUcfXcXhXinK7RbOymd73i6II search the img2tar script and convert it into .tar, then flash it with odin
if it doesn't work flash the kernel script cleaning and then flash again the kernel :good:
marco978 said:
Sorry..but is there any way I could flash the modem via recovery?
I flashed albe95 s6 port with ur kernel script then the patch
Everything except WiFi works
Can u pls help me?
And can u pls link me the modem?
I'll b waiting?
Click to expand...
Click to collapse
Did it work bro? Tell me otherwise I gonna use it to!!
---------- Post added at 06:47 PM ---------- Previous post was at 06:45 PM ----------
marco978 said:
Sorry..but is there any way I could flash the modem via recovery?
I flashed albe95 s6 port with ur kernel script then the patch
Everything except WiFi works
Can u pls help me?
And can u pls link me the modem?
I'll b waiting?
Click to expand...
Click to collapse
Do it work bro? Let me know!!
Hi, I've flashed this kernel with iperium v13, but wifi doesn't works, I have tried all but nothing
@ndry said:
Hi, I've flashed this kernel with iperium v13, but wifi doesn't works, I have tried all but nothing
Click to expand...
Click to collapse
For this to work you need to have the OJ3 baseband version
Than flash the cleaning script and kernel patch
WiFi should work now
marco978 said:
For this to work you need to have the OJ3 baseband version
Than flash the cleaning script and kernel patch
WiFi should work now
Click to expand...
Click to collapse
Oh thanks and where I can find the oj3 baseband?
EDIT: Ok I've extracted it from a firmware.
EDIT2: Ok now it's working thanks
@ndry said:
Oh thanks and where I can find the oj3 baseband?
EDIT: Ok I've extracted it from a firmware.
EDIT2: Ok now it's working thanks
Click to expand...
Click to collapse
Nice
Glad I could help
I myself can't flash it becuz I can't get my hands on pc/ laptop for some time
So I'm just rolling with VrToxin
Hi, i flashed your kernel on lollirom v8.0 and it's work fine ,but the 4G doesn't work maybe cause i live in Italy. Can you fix this? Thanks
I just flashed this on albe95
With oj3 baseband
But no sim bug WiFi works but sim cannot b read!!
Any solution guys?:/
Sent from my GT-I9515 using Tapatalk
Related
STOCK Odin flashable KNOX FREE N7100XXUEMJ5 ROM
Guys :
Here is the Single Odin flashable tar file with KNOX Free Bootloader and Working Wifi..
Important notes :
N7100XXUEMJ5 is a leaked version, This will wipe your internal SD Card.
Do a backup of your EFS
Installation steps :
1. Download and extract KS_MULTI_CSC_N7100XXUEMJ5.zip file.
2. Backup, Backup, Backup
3. Flash using ODIN 3 v3.09
4. Reboot
Enjoy
** I will try to make and upload Pre-rooted Odin Flashable file if time permits**
Meanwhile To root device Use MultiTool by drKetan. You have to download MultiTool advanced V5 for 4.3 from this post
Big Thanks to
@drketan - For his contribution to XDA
@sammobile - For leaked N7100XXUEMJ5
Can anybody confirm I have low download speed
Sent from my GT-N7100 using xda premium
This is nice. Did you rooted also? .. It will be nice to have all in one. Thank you.
goodoane said:
This is nice. Did you rooted also? .. It will be nice to have all in one. Thank you.
Click to expand...
Click to collapse
kunals.shah said:
** I will try to make and upload Pre-rooted Odin Flashable file if time permits**
Meanwhile To root device Use MultiTool by drKetan. You have to download MultiTool advanced V5 for 4.3 from this post
Click to expand...
Click to collapse
ss says selinux enforcing does it means it affects knox warrenty void counter?and is downgrade possible to mi6 or older 4.1.2 tw roms?
drsiddique5700 said:
ss says selinux enforcing does it means it affects knox warrenty void counter?and is downgrade possible to mi6 or older 4.1.2 tw roms?
Click to expand...
Click to collapse
This ROM doesn't have KNOX bootloader, means no KNOX warranty counter. And yes, downgrade is possible.
-KS
Thx for your work kunals.shah....do you implement other voice packs? Or just Asian and English?
Gesendet von meinem GT-N7100 mit Tapatalk
justkiddinghere said:
Can anybody confirm I have low download speed
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
MIRROR added ..
-KS
other voice packs? Or just Asian and English?
THANKs
.. .. .. DWNLDNG
hi
thanks for work
1qes : wifi is stable?
---------- Post added at 02:42 PM ---------- Previous post was at 02:36 PM ----------
hi
thanks for work
1qes : wifi is stable?
saeid_linker said:
hi
thanks for work
1qes : wifi is stable?
---------- Post added at 02:42 PM ---------- Previous post was at 02:36 PM ----------
hi
thanks for work
1qes : wifi is stable?
Click to expand...
Click to collapse
Yes, Wifi seems more stable than other leaks.
atonal said:
Thx for your work kunals.shah....do you implement other voice packs? Or just Asian and English?
Gesendet von meinem GT-N7100 mit Tapatalk
Click to expand...
Click to collapse
TTLGKS20 said:
other voice packs? Or just Asian and English?
Click to expand...
Click to collapse
Will Push more Voice Packs and Languages with Pre-rooted Version. Most probably tomorrow.
-KS
kunals.shah said:
Will Push more Voice Packs and Languages with Pre-rooted Version. Most probably tomorrow.
-KS
Click to expand...
Click to collapse
To late:silly:
Its only English(United Kingdom,US,Phillipines),Bahasia,Tieng Viet and some undefinied Countries(Chinese ore something)
Waiting for Languagepack. Maybe this Information in first Thread.Thx
Kai
tigerkaiwoods said:
To late:silly:
Its only English(United Kingdom,US,Phillipines),Bahasia,Tieng Viet and some undefinied Countries(Chinese ore something)
Waiting for Languagepack. Maybe this Information in first Thread.Thx
Kai
Click to expand...
Click to collapse
This is a stock leaked firmware. I just made it KNOX free bootloader. Didn't change SYSTEM files or anything. Based on member's requests I made this stock firmware with more Voice Packs and Languages. Uploading it now.. I'll update the OP download link once I'm done with uploading... Enjoy!!
-KS
Sorry for the delay, Wait is over... Here is the link KS_MULTI_CSC_N7100XXUEMJ5.zip
OP Updated with the same link.
-KS
Hi,
is this wipe ROM? I'm on rooted stock 4.1.2 and I don't want to reinstall all apps....(backup-restore tools don't work 100% - for example Sygic and it's map data)
Thx Jiri
kunals.shah said:
Sorry for the delay, Wait is over... Here is the link KS_MULTI_CSC_N7100XXUEMJ5.zip
OP Updated with the same link.
-KS
Click to expand...
Click to collapse
Thank you. :good: Included in the Hungarian language?
jura55 said:
Hi,
is this wipe ROM? I'm on rooted stock 4.1.2 and I don't want to reinstall all apps....(backup-restore tools don't work 100% - for example Sygic and it's map data)
Thx Jiri
Click to expand...
Click to collapse
Yes, This is wipe ROM, this will wipe your data as well as internal SD card. Wait for a day, I am preparing pre-rooted version of this ROM.
-KS
lasse001 said:
Thank you. :good: Included in the Hungarian language?
Click to expand...
Click to collapse
I think yes, Is it "Magyar" ?
Hey there,
may some1 upload a flashable DSP Manager for 4.4.2 zip file?
thanks
EDIT: Ist it possible to flash this one (http://forum.xda-developers.com/showthread.php?t=2516306) ?
xmattjus said:
It should work without any problem! However be sure to make a Nandroid backup first, just to be safe.
Click to expand...
Click to collapse
Works like a charm! Thanks
The flashing this mod fm radio not worked.
Enviado desde mi XT1032 mediante Tapatalk
Hey guys I've ported the S6 Marshmallow Style SystemUI made by @blackwings66 for our G800F.
I dont know if it will work also in other S5 Mini variants.
Link to the original thread
Install Instructions:
1 Reboot Recovery
2 Make a Nandroid Backup (Recommended)
3 Flash File
4 Reboot to System
Download Here
Decryption Key: !2ZV23CX05judIEricogkWMhZcvOug72u6Pa0N4c3hRk
Thank you very much, for install this theme, wipes (data, cache, dalvik, system) are necessary or not ?
Envoyé de mon SM-G800F en utilisant Tapatalk
---------- Post added at 08:38 PM ---------- Previous post was at 08:35 PM ----------
And please can you create a S6/S7 ROM for G800F ? Or can you help me to make this ROM ?
Envoyé de mon SM-G800F en utilisant Tapatalk
No it doesn't need any wipe
Currently I'm making an S7 port but it's based on stock 5.1.1 touchwiz, i think that later I will make a full S7 port. I don't make it now because it's my primary phone and I don't wanna restore any time I get a bootloop
Ok thank hou but I have making S7 ROM but can you explain or give me your updater-script file and update-binary is please ?
Are you using a system.new.dat file for your ROM or not ?
Envoyé de mon SM-G800F en utilisant Tapatalk
G800M
Work
Hi, thanks for this, but let me report you some bugs
1st, the clock is a little bit too near to the battery icon in the status bar..
2nd, clicking on the down arrow in the notification panel doesn't work :/
3rd, the text "Tap here to connect devices" is not translated (in french in my case)
(Pics are below )
Well, I think that's all, and it's good for a first release, thanks for this again, have a nice day !
firepenguin said:
Hey guys I've ported the S6 Marshmallow Style SystemUI made by @blackwings66 for our G800F.
I dont know if it will work also in other S5 Mini variants.
Link to the original thread
Install Instructions:
1 Reboot Recovery
2 Make a Nandroid Backup (Recommended)
3 Flash File
4 Reboot to System
Download Here
Decryption Key: !2ZV23CX05judIEricogkWMhZcvOug72u6Pa0N4c3hRk
Click to expand...
Click to collapse
Can you make this UI for g800h?
I cant insert my Sim Pin, it is not possible to comfirm it.
passie99 said:
I cant insert my Sim Pin, it is not possible to comfirm it.
Click to expand...
Click to collapse
I know it, i'm gonna fix this early
When a complete S7 port rom?
the extracted systemui is the g800h version
i think something went wrong with your upload?
PsyLluminat 23 said:
the extracted systemui is the g800h version
i think something went wrong with your upload?
Click to expand...
Click to collapse
Are you sure? Because mine is for G800F and it works, with only a bug with SIM PIN.
@PsyLluminat 23 Try this.
Andrea224 said:
@PsyLluminat 23 Try this.
Click to expand...
Click to collapse
this one realy work on your g800f?? if i try to install it manually the installer says parsing failure, this means it wouldnt work when i flash it
PsyLluminat 23 said:
this one realy work on your g800f?? if i try to install it manually the installer says parsing failure, this means it wouldnt work when i flash it
Click to expand...
Click to collapse
Yes, I tried it and it worked. What I did is flash the stock rom first (I'm at the moment on CM13) and then go into TWRP 3.0.0 and flash it without any problem.
Andrea224 said:
Yes, I tried it and it worked. What I did is flash the stock rom first (I'm at the moment on CM13) and then go into TWRP 3.0.0 and flash it without any problem.
Click to expand...
Click to collapse
had tried it many times in different ways but after install there is no Systemui when the rom is booted..
thank u anyway, think i go back to tesla rom and wait for a full s6/s7 port
firepenguin said:
No it doesn't need any wipe
Currently I'm making an S7 port but it's based on stock 5.1.1 touchwiz, i think that later I will make a full S7 port. I don't make it now because it's my primary phone and I don't wanna restore any time I get a bootloop
Click to expand...
Click to collapse
for the s7 port:
I could be a (very) happy tester. I own a g800f and really want to have a s6/7 port for this phone, so I could test anything you want
EDIT:
I just installed the .zip available for download and found a couple of bugs:
-the fiirst one is in the lockscreen, where it won't let you enter your pin number (I am now using the phone without SIM)
-the second one is in the notifications panel, where it doesn't let you expand quick options. I tap on the down arrow, it does its animation, but then nothing happens (this is just a thing that I don't personally use)
nico_vo said:
for the s7 port:
I could be a (very) happy tester. I own a g800f and really want to have a s6/7 port for this phone, so I could test anything you want
Click to expand...
Click to collapse
I could also be a tester for the S7 port. I'm waiting a port for G800F for a long time.
Sent from my SM-G800F using XDA-Developers mobile app
Andrea224 said:
I could also be a tester for the S7 port. I'm waiting a port for G800F for a long time.
Sent from my SM-G800F using XDA-Developers mobile app
Click to expand...
Click to collapse
Do you also have the sim pin issue?
Enviado desde mi SM-G800F mediante Tapatalk
nico_vo said:
Do you also have the sim pin issue?
Enviado desde mi SM-G800F mediante Tapatalk
Click to expand...
Click to collapse
Yes, it's a common bug.
Sent from my SM-G800F using XDA-Developers mobile app
STOCK KERNEL FOR NOTE 4 910C (Exynos)
WORKS WITH 6.0.1 TW!!
Code:
*** Disclaimer
This is a stock kernel. Please be aware that it is for 910C Exynos only.
I can not guarantee that it will work for other devices.
Use it at you own risk. If anything goes wrong I take no responsibility.
Introduction
This kernel is build from stock samsung PCB kernel sources I wanted to keep it as stock as possible for people like me that are satisfied with the stock kernel, do not want OC, UV.
The Kernel is SElinux Permissive.
Click to expand...
Click to collapse
Description
This is the stock samsung kernel source, but changed the SELinux policy from enforcing to permissive. In the settings app, it still shows as "Permissive". Removed the restrictions from kernel source regarding rooting etc.
Click to expand...
Click to collapse
Instructions
-Install Twrp (Info - Download Latest) Using Odin. Select not to reboot and remove your battery when finished. Insert battery holding VolumeUP+home+Power. This will get you into TWRP
-Reboot to Recover
-Flash kernel throught TWRP
-Clear Darvik/Cache throught TWRP
-Install SU beta 2.71
-Reboot and wait some minutes... If phone does not start in 20 minutes then restart and wait again.
-boot system and remove with titanium backup anything that has to do with Knox and security log....
*******
Click to expand...
Click to collapse
Downloads
Mod Edit : Links Removed
OLDER Versions
Mod Edit : Links Removed
Uninstall
-Stock kernel PCB Ramdisk
[/quote]
Donate
Keep me motivated Click HERE
Click to expand...
Click to collapse
Sources
Soon...
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Samsung
* Google
* All of you that support me thought the thread!
Reserved
Thanks bro. Keep it up
Sent from my SM-N910C using Tapatalk
Thank you mate! Keep up the good job!
Hi, what are tweaks different from stock kernel and change log
Sent from my SM-N910C using Tapatalk
Is this n910H compatible?
thanks
Thanx man and keep up the great work
Yahoo!! Talexop is back with Marshmallow.
Thank you and keep update.
Sent from my SM-N910C using Tapatalk
Ok. Thank's
Enviado desde mi SM-N910C mediante Tapatalk
thanks man
أرسلت من SM-G935F بإستخدام تاباتلك
very nice
Sent from my SM-N910C using XDA-Developers mobile app
1 question I'm on your 5.1.1 talexop how can I use ur 6.0.1 since I can't update from phone, I can't find answers because I'm lost
Sent from my SM-N910C using XDA-Developers mobile app
Sorry but I do not understand exactly what you want to do... Are you already to 6.0.1 or 5.1.1 .... This kernel only works with 6.0.1 and must be flashed from TWRP.... Also you will need to root it afterwards using the link in first page..
Teşekkürler
SM-N910C cihazımdan Tapatalk kullanılarak gönderildi
I'm on 5.1.1 how could I update since I've rooted through your methods for the 5.1.1 with kernel. is it possible to update through the PC
Sent from my SM-N910C using XDA-Developers mobile app
Please make a N910H version too. Im a fan of your kernel
Sent from my SM-N910H using Tapatalk
vodanhdaisu said:
Please make a N910H version too. Im a fan of your kernel
Sent from my SM-N910H using Tapatalk
Click to expand...
Click to collapse
what supports N910C supports N910H device both have same source and hardware
Crozar said:
I'm on 5.1.1 how could I update since I've rooted through your methods for the 5.1.1 with kernel. is it possible to update through the PC
Sent from my SM-N910C using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello,
Are you with 6.0.1 rom?
If so then the main idea is that you will have to flash my kernel and then su chainfire 2.71 from recovery..
Please contact me for more info..
Will try this soon!
Link
https://app.box.com/s/ngoolivl6qmu1d0kut2oiqmzcui78xk4
Gif working.....
Flash via TWRP
http://imgur.com/a/6ibe6
http://imgur.com/a/CiQmd
can add link to mega or google drive? i cant download from box.net
moneyrain said:
can add link to mega or google drive? i cant download from box.net
Click to expand...
Click to collapse
Update link .
Thank you very much. It's working on S7 edge Duos.
Is that work with FlashFire on S7E ?
nvthd94 said:
Link
https://mega.nz/#!zp81WbpL!kMXj9TxeCwRhgrLl2sl8PIOLX3OcfLJt0PY7c8w8hp4
Flash via TWRP
Click to expand...
Click to collapse
it would be helpful if you state that this port works with S7 ROM and/or Note 7 ROM Ports.... thanks.
Working for s7/s7e stock odex and rom cook deodex
Working for N7 rom port
nvthd94 said:
Working for s7/s7e stock odex and rom cook deodex
Working for N7 rom port
Click to expand...
Click to collapse
thanks for the reply... so only the GIF feature works on my S7, with Jesse 1.6 Note 7 ROM Port? for me, Smart Select, Screen Write aren't working (which is what i expected).
cortez.i said:
thanks for the reply... so only the GIF feature works on my S7, with Jesse 1.6 Note 7 ROM Port? for me, Smart Select, Screen Write aren't working (which is what i expected).
Click to expand...
Click to collapse
sorry . it only works with pen
Screen shots?
Enviado desde mi SM-G930F mediante Tapatalk
JT Vinishan said:
Screen shots?
Enviado desde mi SM-G930F mediante Tapatalk
Click to expand...
Click to collapse
Look, and you shall see.
Installed but when i select it, nothing happened.. Btw im using superman rom on s7 SM-930F..
Is it possible to install this on an non rooted edge?
My phone s7 edge g935f
Android v : 6.0.1
flash N7 Air Command.zip and reboot phone. but not working Air Command.
Hello ! Work fine on s7 rom marshmallow ! can u make a compatible version for nougat ? Thx for your beautiful work ! ?
:good:
artnada said:
Look, and you shall see.
Click to expand...
Click to collapse
I mean
I can't make screenshots
Enviado desde mi SM-G930F mediante Tapatalk
@nvthd94 friend great job friend, but on Nougat not works.
hi I only got one problem
after flashing the mod I always get android is upgrading message with every restart.
is there a way to fix that ?
I made sure that it is the mod that is making this.