Related
just a few I have gathered, the first set = ro.ril is for 3g only. The rest should be pretty well universal. V8 Supercharger adds a few as well. There's many more you can add with custom kernel/ and init.d support.
I definetly noticed a change with RIL tweaks, went from 3-4Mbps download to 8! webpages load much quicker. Universal tweaks noticed minor imporvement but definetly some. I would like to see if anyone else has any good ones as well.
3G ONLYReboot twice(x2) to take effect
ro.ril.gprsclass=12
ro.ril.hep=0
ro.ril.enable.3g.prefix=1
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=9
ro.ril.hsxpa=3
ro.ril.a53=1
ro.ril.disable.power.collapse=0
0=do not disable power collapse= hibernate/power save (I think)
ro.telephony.call_ring.delay=500
delay before outgoing call rings
ro.mot.eri.losalert.delay=1000
network loss of service alert, time before rescan/restarting
UNIVERSAL
debug.sf.hw=1
render UI with GPU instead of CPU
windowsmgr.max_events_per_sec=150
improves touch
wifi.supplicant_scan_interval=150
wifi scans less = saves battery
dalvik.vm.execution-mode=int:jit
enable JIT Just In Time Compiler
mot.proximity.delay=25
time it takes for screen wake after removing phone from face.
pm.sleep_mode=1
battery save
video.accelerate.hw=1
hardware acceleration
ro.media.dec.jpeg.memcap=8000000
improves jpeg quality
ro.media.enc.hprof.vid.bps=8000000
improves video quality
ro.media.enc.jpeg.quality=90
improves picture quality
ro.HOME_APP_ADJ=1
keeps home app in memory, most custom launchers have this option
ro.kernel.android.checkjni=0
makes some incomaptible apps work; more info here..http://www.netmite.com/android/mydroid/dalvik/docs/embedded-vm-control.html
debug.performance.tuning=1
improves touch
That pretty much the same tweaks I've seen in 3.2 Gt 10.1 roms. I wanted to try those and some other tweaks in a rom but can't seem to get isomagic to open factoryfs...probably for the best. Who knows what I'd screw up
use root explorer, the best, will make a backup automagically.
May have some overlaps. these are what i collected over the months
# EXtended Tweaks
persist.sys.use_dithering=0
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=20
mot.proximity.delay=25
ro.config.hwfeature_wakeupkey=0
ro.mot.eri.losalert.delay=1000
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.kernel.android.checkjni=0
ro.secure=0
ro.debuggable=1
windowsmgr.max_events_per_sec=400
ro.min.fling_velocity=4000
ro.max.fling_velocity=8000
wifi.supplicant_scan_interval=180
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
debug.composition.type=gpu
ro.min_pointer_dur=1
persist.android.strictmode=0
persist.sys.use_16bpp_alpha=1
persist.sampling_profiler=0
ro.config.play.bootsound=0
# Dalvik VM Tweaks
dalvik.vm.startheapsize=4m
dalvik.vm.heapsize=48m
dalvik.vm.dexopt-data-only=1
dalvik.vm.execution-mode=int:jit
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v
dalvik.vm.lockprof.threshold=500
# WiFi speed Tweaks
net.ipv4.tcp_ecn=0
net.ipv4.route.flush=1
net.ipv4.tcp_rfc1337=1
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.tcp_sack=1
net.ipv4.tcp_fack=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_wmem=4096 39000 187000
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_moderate_rcvbuf=1
# 3G Tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=32
ro.ril.hsdpa=28
ro.ril.hsdpa.category=28
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=9
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.enable.dtm=1
# Net speed tweaks
net.tcp.buffersize.default=4096,87380,110208,4096,16384,110208
net.tcp.buffersize.wifi=4095,87380,110208,4096,16384,110208
net.tcp.buffersize.umts=4094,87380,110208,4096,16384,110208
net.tcp.buffersize.edge=4093,26280,35040,4096,16384,35040
net.tcp.buffersize.gprs=4092,8760,11680,4096,8760,11680
net.tcp.buffersize.hsdpa=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.evdo_b=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.hspa=6144,87380,262144,6144,16384,262144
# V6 SuperCharger, OOM Grouping & Priority Fixes created by zeppelinrox.
# DO NOT DELETE COMMENTS. DELETING COMMENTS WILL BREAK UNINSTALL ROUTINE!
# BEGIN OOM_MEM_Settings
ro.FOREGROUND_APP_MEM=2048
ro.VISIBLE_APP_MEM=3072
ro.PERCEPTIBLE_APP_MEM=4096
ro.HEAVY_WEIGHT_APP_MEM=4096
ro.SECONDARY_SERVER_MEM=6144
ro.BACKUP_APP_MEM=6144
ro.HOME_APP_MEM=6144
ro.HIDDEN_APP_MEM=7168
ro.CONTENT_PROVIDER_MEM=5632
ro.EMPTY_APP_MEM=8192
# END OOM_MEM_Settings
# BEGIN OOM_ADJ_Settings
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=3
ro.PERCEPTIBLE_APP_ADJ=2
ro.HEAVY_WEIGHT_APP_ADJ=4
ro.SECONDARY_SERVER_ADJ=6
ro.BACKUP_APP_ADJ=7
ro.HOME_APP_ADJ=1
ro.HIDDEN_APP_MIN_ADJ=9
ro.EMPTY_APP_ADJ=15
# END OOM_ADJ_Settings
# End of V6 SuperCharged Entries
#Other Tweaks Added By V6
ENFORCE_PROCESS_LIMIT=false
MAX_SERVICE_INACTIVITY=false
MIN_HIDDEN_APPS=false
MAX_HIDDEN_APPS=false
CONTENT_APP_IDLE_OFFSET=false
EMPTY_APP_IDLE_OFFSET=false
MAX_ACTIVITIES=false
ACTIVITY_INACTIVE_RESET_TIME=false
MAX_RECENT_TASKS=false
MIN_RECENT_TASKS=false
APP_SWITCH_DELAY_TIME=false
MAX_PROCESSES=false
PROC_START_TIMEOUT=false
CPU_MIN_CHECK_DURATION=false
GC_TIMEOUT=false
SERVICE_TIMEOUT=false
MIN_CRASH_INTERVAL=false
#Disable_Google_OTA_Checkin
ro.config.nocheckin=1
#Disable_Google_Reports
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
#Enable_Google_DNS_Servers
net.dns1=8.8.8.8
net.dns2=8.8.4.4
# Qualcom Tweaks
debug.qctwa.statusbar=1
debug.qctwa.perservebuf=1
com.qc.hardware=true
( if you have qualcomm processors only)
GUYS DO REMEMBER MY V6 Supercharger entries only work on gingerbread roms, and every device has difference values. if it does work well for you, good. or else delete them! (if you are on gingerbread rom, you can install v6 then pull the build.prop after setting up v6 and use values from there)
..
Every carrier have different values. I had bad battery drains too. I will try to look for universal one. And edit this post...
Sent from my Kamen Rider Faiz Gear
Try these instead.
# 3G Tweaks
ro.ril.hep=1
ro.ril.hsxpa=2
ro.ril.enable.dtm=1
ro.ril.gprsclass=12
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=5
ro.ril.enable.a53=1
Oh remove V6 tweaks because they are for my lgp500 a low end device. Use supercharger to get your own values.
Sent from my Kamen Rider Faiz Gear
Hello Dear N3 users & Devs this build.prop Tweaks so just copy/paste on ur Build.prop at the end of build.prop & may it's can helping u& may no & also for DEVS so I hope it's helping u
Guys this may work on ur Rom & may not so some roms didn't work with this build.prop so asking ur Dev roms ...
~~~> SUPPORTING LOLLIPOP <~~~
# thereassaad TWEAKS
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1 persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ro.telephony.call_ring.delay=0
ring.delay=0
# Other Tweaks:
ro.config.combined_signal=true
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.config.tima=0
ro.config.knox=0
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=12
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=16m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds)
ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Rendering Tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=20
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# Better image quality, lower performance.
persist.sys.use_dithering=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=1
# Default Network Mode
ro.telephony.default_network=10
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Other Tweaks
qemu.hw.mainkeys=1
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
ro.config.hw_new_wifitopdp=1
Minimum brightness of your screen
ro.lcd_min_brightness=20
#
ro.ril.gprsclass=10
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# Multi Users
fw.max_users=30
fw.show_multiuserui=1
#
debug.sf.hw=1
video.accelerate.hw=1
persist.sys.use_dithering=1
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.NV_FPSLIMIT=90
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=0
ro.ril.set.mtu1472=1
touch.presure.scale=0.001
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=300
persist.cust.tel.eons=1
# Power Saving Tweaks
pm.sleep_mode=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=1m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.composition.type=gpu
ro.max.fling_velocity=20000
ro.min.fling_velocity=18000
debug.performance.tuning=1
debug.kill_allocating_task=0
debug.overlayui.enable=1
debug.egl.profiler=1
debug.egl.hw=1
debug.sf.hw=1
hw3d.force=1
hw2d.force=1
force_hw_ui=true
persist.sys.purgeable_assets=1
persist.sys.use_dithering=1
ro.min_pointer_dur=1
debug.kill_allocating_task=0
persist.sys.ui.hw=1
ro.debuggable=1
ro.config.disable.hw_accel=false
ro.kernel.android.checkjni=0
ro.secure=0
ro.min_pointer_dur=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
power_supply.wakeup=enable
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
ro.debuggable=1
ro.min_pointer_dur=1
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# 16bit Transparency
persist.sys.use_16bpp_alpha=1
#
# Screen recognizes only two fingers
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
# Remove FPS cap
debug.gr.swapinterval=0
# Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Enables MTP mode
persist.sys.usb.config=mtp
#For usb storage
ro.usb_host=1
#Simulate sdcard on /data/media
persist.fuse_sdcard=true
ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure=10
#Disable USB Debugging Popup
persist.adb.notify=0
# Bass audio props for Lolipop
tunnel.decode=false
lpa.use-stagefright=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resampler.quality=255
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
# Enable Quick Power-On mode to reduce boot-time
ro.config.hw_quickpoweron=true
# ButtonLight Always On - Remove # Below To Enable
ro.mot.buttonlight.timeout=0
# Enables 270 Degree Rotation
windowsmgr.support_rotation_270=true
thereassaad said:
Hello Dear N3 users & Devs this build.prop Tweaks so just copy/paste on ur Build.prop at the end of build.prop & may it's can helping u& may no & also for DEVS so I hope it's helping u
# Rendering Tweaks
debug.composition.type=c2d
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Default Network Mode
ro.telephony.default_network=10
# Enable GPU Acceleration
video.accelerate.hw=1
debug.performance.tuning=1
persist.sys.composition.type=gpu
debug.qc.hardware=true
debug.qctwa.statusbar=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu
hw3d.force=1
ro.product.gpu.driver=1
persist.sys.use_16bpp_alpha=1
persist.sampling_profiler=0
hwui.render_dirty_regions=false
hwui.disable_vsync=true
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=497
pm.sleep_mode=1
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
# Battery save
ro.ril.disable.power.collapse=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Sensor Sleep Control
ro.ril.sensor.sleep.control=1
# Device will boot faster
persist.sys.shutdown.mode=hibernate
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Reduce dial-out time
ro.telephony.call_ring.delay=0
# Allow purge of assets to free more ram
persist.sys.purgeable_assets=1
# More free ram and apps load faster
dalvik.vm.dexopt-flags=m=y
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
ro.config.low_ram.mod=true
# Increase general Performance
debug.performance.tuning=1
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
persist.sys.NV_FPSLIMIT=60
ro.debuggable=1
ro.min_pointer_dur=8
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# Reduce the black screen time of the proximity sensor
ro.lge.proximity.delay=25
mot.proximity.delay=25
# TOUCH
touch.presure.scale=0.001
# Better Scrolling responsiveness and speed
windowsmgr.max_events_per_sec=150
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
# Smoothens UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
ro.ril.enable.a52=1
ro.ril.enable.a53=0
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Force launcher into memory
ro.HOME_APP_ADJ=1
# Disable Bytecode Verification
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=m=y,v=n,o=v
#dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Disable Error reporting and logs
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Disable Sending Usage Data
ro.config.nocheckin=1
# Fix some application issues (FC)
ro.kernel.android.checkjni=0
# MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds)
ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Better internet browsing & download speed
net.tcp.buffersize.default=6144,87380,1048576,6144 ,87380,524288
net.tcp.buffersize.wifi=524288,1048576,2097152,524 288,1048576,2097152
net.tcp.buffersize.umts=6144,87380,1048576,6144,87 380,524288
net.tcp.buffersize.gprs=6144,87380,1048576,6144,87 380,524288
net.tcp.buffersize.edge=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# 3G signal and speed tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# CRT
persist.sys.screen_off=crt
persist.sys.screen_on=none
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=180
net.ipv4.tcp_fack=1
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing
# Disable logcat
logcat.live=disable
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=15
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=0
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Sorry for the noob question, what is the advantages of using this ? Thanks anyhow, any rom will do ?
Aluyi said:
Sorry for the noob question, what is the advantages of using this ? Thanks anyhow, any rom will do ?
Click to expand...
Click to collapse
U can use it in any rom u want & my tweaks its explain what advantage if u use it when its begin with #.... u can see it bro
Sent from my SM-G900F using Tapatalk
thereassaad said:
U can use it in any rom u want & my tweaks its explain what advantage if u use it when its begin with #.... u can see it bro
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Oh boy that was fast, thanks man you the greatest.:good:
Hi. Can't we gave a tweak for home (hard button) button responsevness. It's tkaes time compelared to when we press a soft button.
Any Tweak at all ?
Thanks
Richard_10 said:
Hi. Can't we gave a tweak for home (hard button) button responsevness. It's tkaes time compelared to when we press a soft button.
Any Tweak at all ?
Thanks
Click to expand...
Click to collapse
if u mean responsevness add this line to ur build.prop
# Better Scrolling responsiveness and speed
windowsmgr.max_events_per_sec=150
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
Sent from my SM-G900F using Tapatalk
I know you said all note 3s can use... But to clarify can I use these on aosp based ROMs...and I'm on T-Mobile sm-n900t..thanks for this
---------- Post added at 04:47 PM ---------- Previous post was at 04:03 PM ----------
And another question do I have to add # in the beginning
mlock420 said:
I know you said all note 3s can use... But to clarify can I use these on aosp based ROMs...and I'm on T-Mobile sm-n900t..thanks for this
---------- Post added at 04:47 PM ---------- Previous post was at 04:03 PM ----------
And another question do I have to add # in the beginning
Click to expand...
Click to collapse
U can add to ur aosp based rom at ur responsibility I didnt test on aosp roms & make full backup okay & yeah add # in beginning on ur build.prop
Sent from my SM-G900F using Tapatalk
thereassaad said:
U can add to ur aosp based rom at ur responsibility I didnt test on aosp roms & make full backup okay & yeah add # in beginning on ur build.prop
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Thank you...
Is this how this is supposed to be set does the hash tag need space?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mlock420 said:
Is this how this is supposed to be set does the hash tag need space?
Click to expand...
Click to collapse
Its better if u add # for u may in future u need to change something so # may help u just if u wanted
Sent from my SM-G900F using Tapatalk
Most of them doesn't exist in Android's source codes. Some of them should be added manually.
More free ram tweak is working perfectly. Thanks!!!!
King ov Hell said:
Most of them doesn't exist in Android's source codes. Some of them should be added manually.
Click to expand...
Click to collapse
Yeah added manually
thereassaad said:
Yeah added manually
Click to expand...
Click to collapse
King ov Hell said:
Click to expand...
Click to collapse
??
jhonm6060 said:
More free ram tweak is working perfectly. Thanks!!!!
Click to expand...
Click to collapse
Hey bro what mod u use for IOS7 signal & battery? ? Can u share me link ??
I select all tweak and paste into build.prop file on my Omega rom v21 and i get 1 reboot after boot into system i get message does i want activate safe mode wtf...than i delete few tweaks and for now work all without any reboots so i have question does can i like use all this tweaks in one rom is something wrong if any of tweaks writed two time in same build.prop???
BLiNKT said:
I select all tweak and paste into build.prop file on my Omega rom v21 and i get 1 reboot after boot into system i get message does i want activate safe mode wtf...than i delete few tweaks and for now work all without any reboots so i have question does can i like use all this tweaks in one rom is something wrong if any of tweaks writed two time in same build.prop???
Click to expand...
Click to collapse
Bro may not working all on ur rom so asking ur rom dev okay bro & yeah u can choose what u want to u use it then copy/paste to ur build.prop okay
thereassaad said:
Bro may not working all on ur rom so asking ur rom dev okay bro & yeah u can choose what u want to u use it then copy/paste to ur build.prop okay
Click to expand...
Click to collapse
What ROM are you using?
Hello Dear S4 users & Devs this is Build.prop Tweaks so copy/paste what u want to ur rom at the end of ur rom & may it's helping u & may no .. & also for DEVS so I hope it's helping u
Guys this may work on ur Rom & may not so some roms didn't work with this build.prop so asking ur Dev roms...
~~~> SUPPORTING LOLLIPOP <~~~
# thereassaad TWEAKS
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1 persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ro.telephony.call_ring.delay=0
ring.delay=0
# Other Tweaks:
ro.config.combined_signal=true
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.config.tima=0
ro.config.knox=0
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=12
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=16m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds)
ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Rendering Tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=20
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# Better image quality, lower performance.
persist.sys.use_dithering=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=1
# Default Network Mode
ro.telephony.default_network=10
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Other Tweaks
qemu.hw.mainkeys=1
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
ro.config.hw_new_wifitopdp=1
Minimum brightness of your screen
ro.lcd_min_brightness=20
#
ro.ril.gprsclass=10
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# Multi Users
fw.max_users=30
fw.show_multiuserui=1
#
debug.sf.hw=1
video.accelerate.hw=1
persist.sys.use_dithering=1
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.NV_FPSLIMIT=90
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=0
ro.ril.set.mtu1472=1
touch.presure.scale=0.001
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=300
persist.cust.tel.eons=1
# Power Saving Tweaks
pm.sleep_mode=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=1m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.composition.type=gpu
ro.max.fling_velocity=20000
ro.min.fling_velocity=18000
debug.performance.tuning=1
debug.kill_allocating_task=0
debug.overlayui.enable=1
debug.egl.profiler=1
debug.egl.hw=1
debug.sf.hw=1
hw3d.force=1
hw2d.force=1
force_hw_ui=true
persist.sys.purgeable_assets=1
persist.sys.use_dithering=1
ro.min_pointer_dur=1
debug.kill_allocating_task=0
persist.sys.ui.hw=1
ro.debuggable=1
ro.config.disable.hw_accel=false
ro.kernel.android.checkjni=0
ro.secure=0
ro.min_pointer_dur=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
power_supply.wakeup=enable
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
ro.debuggable=1
ro.min_pointer_dur=1
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# 16bit Transparency
persist.sys.use_16bpp_alpha=1
#
# Screen recognizes only two fingers
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
# Remove FPS cap
debug.gr.swapinterval=0
# Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Enables MTP mode
persist.sys.usb.config=mtp
#For usb storage
ro.usb_host=1
#Simulate sdcard on /data/media
persist.fuse_sdcard=true
ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure=10
#Disable USB Debugging Popup
persist.adb.notify=0
# Bass audio props for Lolipop
tunnel.decode=false
lpa.use-stagefright=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resampler.quality=255
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
# Enable Quick Power-On mode to reduce boot-time
ro.config.hw_quickpoweron=true
# ButtonLight Always On - Remove # Below To Enable
ro.mot.buttonlight.timeout=0
# Enables 270 Degree Rotation
windowsmgr.support_rotation_270=true
Nice.... But I tried couple of them mentioned above.... Trust me they dont make a visible difference at all.....
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
Thanks
--
Believes in Christ and you and your family will be safe of the Great day of Jehovah's wrath
I9505 Powered with Phoenix Rom v9.4 - Tamirda
GoogyMax Kernel v1.1.5 - Googy_anas
Philz touch Recovery - Philz
S5's S-view Cover service - Karkasss
Jehovah's Thunder Bootanimation - Pas2001
Bootanimation sound - Me
A lot of mods and stuff - Xda community
Thanks to all of you...
Different manufacturers use different parameters. I don't think this whole list is for Samsung exactly.
most funny options:
# Reduce the black screen time of the proximity sensor
ro.lge.proximity.delay=25 - this is for LG phones.
mot.proximity.delay=25 - this is for Motorola phones.
Works on any rom? AOSP? TW?
S4 - i9500
Pls update your tweaks for lollipop
Okay soon maybe tomorrow okay
Dear Bad Luck... Let’s break UP.
Thread UPDATED
Don't Pray For An Easy Life, Pray For The Strength To Endure A Difficult One.
plz build.prop fichier donlowd ??????
good job
thereassaad said:
Thread UPDATED
Don't Pray For An Easy Life, Pray For The Strength To Endure A Difficult One.
Click to expand...
Click to collapse
Hi mate.
Sorry for the question... But this line
dalvik.vm.dexopt-flags=m=v,o=y
Change for this
dalvik.vm.dexopt-flags=m=y
???
Why do people think that Google's engineers didn't understand what they programmed, and there is a better internet, faster and more professional device if you change some parameters? Ridiculous.
Is great .for all android devices !!
Lollipop and kernel s4 is very inestable and no sleep .in aokp the kernel is good ?no drine the battery .
@thereassad nice job , could you also post something for init.d? Universal ones i see some htc codes in your build.prop
HAYLCION said:
@thereassad nice job , could you also post something for init.d? Universal ones i see some htc codes in your build.prop
Click to expand...
Click to collapse
This build.prop tweaks make it for all phones & if u see some for other phones just left mate don't add it .. Anyway all of this tweaks working perfectly here .. & about init.d this days im so busy so maybe later ..
Sent from my SM-G9250 using Tapatalk
Well done ma frnd i found it as very useful information
thereassaad said:
This build.prop tweaks make it for all phones & if u see some for other phones just left mate don't add it .. Anyway all of this tweaks working perfectly here .. & about init.d this days im so busy so maybe later ..
Sent from my SM-G9250 using Tapatalk
Click to expand...
Click to collapse
Yeah i know , thank you these kinda stuffs are always useful..
Is it possible to change build.prop on the fly? I'm looking to have tasker increase wifi scan interval only when i'm connected to a network an have it back to normal when i'm not connected.
mic levels
I have a GT-i9295, which might not be too dissimiliar from the 950X devices?
Any chance you know how to increase the microphone volume, via Build.prop?
See this error description and my ideas:
microphone level low - configurable kernel for i9295 ?
https://forum.xda-developers.com/galaxy-s4-active/help/microphone-level-low-configurable-t3534549
Huge sorry for off-topic, but I am stuck here.
Thanks
Before doing anything plz backup your main build.prop located in root/system/build.prop and save it on the PC by @adblocker
Here is some Enhancements:
- Supreme Battery life (even more in idle)
- Better internet browsing & download speed (NEW2016)
- Smoother experience
- Google DNS
- Better Microphone
- More Ram
- Better signal reception
- Wireless Tweaks
- Smoother video streaming and tweak media
- Faster Boot-Animation FPS (Just compare)
- Better call voice quality
- Game tweaks
- Qualcomm Tweaks
*GUIDE*
1. Find last line of build.prop
2. Copy all of these lines just below the last line
3. Save the changes and set the permissions to rw-r-r
4. Reboot and enjoy
TESTED ON i9505:
-Thor s7
-S6 / N5 port
-Stock 5.0.1
Now i have stock PF4 with this tweas...........FAST.
*copy this*
#ADD
mot.proximity.delay=25
pm.sleep_mode=1
ro.config.nocheckin=1
ro.lge.proximity.delay=25
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
touch.pressure.scale=0.1
# More RAM
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=true
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Other Tweaks:
ro.config.combined_signal=true
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.securestorage.knox=false
#security.mdpp=none
#security.mdpp.result=none
wifi.supplicant_scan_interval=220
# Video Acceleration Enabled And HW debugging
debug.performance.tuning=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw2d.force=1
# 3d performance
ro.secure=0
# Other Tweaks
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
#Minimum brightness of your screen
ro.lcd_min_brightness=1
# System Tweaks
ro.HOME_APP_ADJ=1
# Qualcomm Tweaks
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
# Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Saves some battery without reducing performances
power.saving.mode=1
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Increase some Performance
ro.product.gpu.driver=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
# Bass audio props for Lolipop
tunnel.decode=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Force GPU Rendering on 2d Operations
debug.sf.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=c2d
# Hardware Acceleration Enabled
video.accelerate.hw=1
# Enable 16bit Transparency
persist.sys.use_16bpp_alpha=1
#NEW
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
#End
This work on RR rom?
Are you sure it will works on Thor ROM?
Just copy and paste, no double tweak?
Thor V1.5 - Xposed v.85
How this adds in the rom Thor only copy in the final part the build.pro??
Enviado desde mi SGH-I337 usando Thor S7 Style V1.5
carlosbalbuena_ said:
How this adds in the rom Thor only copy in the final part the build.pro??
Enviado desde mi SGH-I337 usando Thor S7 Style V1.5
Click to expand...
Click to collapse
Yes.
Tried it and it do work.
Sent from my GT-I9505 using Tapatalk
sicahren said:
This work on RR rom?
Click to expand...
Click to collapse
I don't Know..
Do we have to add all of this lines or only what we want ?
Sent from my SM-A710F using XDA-Developers mobile app
think i did right, i scrolled all the way to the bottom of build.prop file in editor and pasted tweaks there and saved and set to rw-r-r is this correct
Are we adding all the lines to get it work?
Sent from my GT-I9505 using Tapatalk
added the lines as the guide says, phone won't boot up. I had to dirt flash rom again.
Richardvinyard said:
added the lines as the guide says, phone won't boot up. I had to dirt flash rom again.
Click to expand...
Click to collapse
Really!! A bit scared now...
---------- Post added at 10:17 PM ---------- Previous post was at 10:11 PM ----------
Saving failed. I used es explorer and i cant get the tweaks to be save. Any solution
opkaybeatz said:
Really!! A bit scared now...
---------- Post added at 10:17 PM ---------- Previous post was at 10:11 PM ----------
Saving failed. I used es explorer and i cant get the tweaks to be save. Any solution
Click to expand...
Click to collapse
I think you need to set permissions to rw rr before doing that... Anyway i have tried to add those lines two times and i ended up with bootloop both. I'm on Thor 1.5.
Richardvinyard said:
I think you need to set permissions to rw rr before doing that... Anyway i have tried to add those lines two times and i ended up with bootloop both. I'm on Thor 1.5.
Click to expand...
Click to collapse
Huh bootloop? Please did you added all the tweaks you added only what you need
opkaybeatz said:
Huh bootloop? Please did you added all the tweaks you added only what you need
Click to expand...
Click to collapse
I followed the instructions and added all the lines
Sorry by that
Can i put this tweak in android version 5.0.1?
Thnaks a lot
I think you can, because i am on android 5.0.1 imperium ll rom. I just added only what i want and no bootloop but i hope it is working. Good luck bro.
opkaybeatz said:
I think you can, because i am on android 5.0.1 imperium ll rom. I just added only what i want and no bootloop but i hope it is working. Good luck bro.
Click to expand...
Click to collapse
Thank you I will try
build.prop Tweaks For Android (BT4A Project)
Just For Rooted Devices
The best build.prop tweak for All Android Phones
Works for any smart phone running
4.3 & 4.4.2 & 4.4.4 & 5.0.1 & 5.0.2 & 5.1.1 & 6.X.X & 7.X.X & CM 11-12.1-13-14
Before doing anything PLEASE backup your main build.prop located in root/system/build.prop and save it on the PC
Here is some Enhancements after applying tweaks:
- Supreme Battery life (even more in idle)
- Better internet browsing & download speed (updated)
- Smoother experience
- Google DNS
- Better Microphone
- More Ram
- Better signal reception
- Wireless Tweaks
- Smoother video streaming and tweak media
- Faster Boot-Animation FPS (Just compare)
- Better call voice quality
- Game tweaks
- 3G Tweaks (NEW 2016)
- Indicator Hack(NEW 2016)
- Qualcomm Tweaks
Changelog:
Code:
V1.3
-Modify some values for better stability
-Add 3G tweaks (beta)
-Add Indicator Hack Codes
How to apply Tweaks :
1. Root your device and install Root Explorer (or any root file manager) then find build.prop located at root/system/build.prop
2. U can Use Root Explorer app or notepad++ to edit your build.prop
3. Open build.prop file with Text editor and Find last line of build.prop
2. Copy all of these lines just below the last line
3. Save the changes and set the permissions to rw-r-r (Remmeber to do that !)
4. Reboot and enjoy
#ADD
mot.proximity.delay=25
pm.sleep_mode=1
ro.config.nocheckin=1
ro.lge.proximity.delay=25
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
touch.pressure.scale=0.1
# More RAM
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=true
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Other Tweaks:
ro.config.combined_signal=true
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.securestorage.knox=false
# Video Acceleration Enabled And HW debugging
debug.performance.tuning=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw2d.force=1
# 3d performance
ro.secure=0
# Other Tweaks
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
#Minimum brightness of your screen
ro.lcd_min_brightness=1
# System Tweaks
ro.HOME_APP_ADJ=1
# Qualcomm Tweaks
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
# Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Saves some battery without reducing performances
power.saving.mode=1
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Increase some Performance
ro.product.gpu.driver=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
# Bass audio props for Lolipop
tunnel.decode=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Force GPU Rendering on 2d Operations
debug.sf.hw=1
debug.egl.profiler=1
debug.egl.hw=1
#NEW
ro.ril.power_collapse=1
pm.sleep_mode=1
wifi.supplicant_scan_interval=180
power.saving.mode=1
ro.com.google.networklocation=0
ro.kernel.android.checkjni=0
ro.config.nocheckin=1
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
profiler.force_disable_err_rpt=1
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
debug.performance.tuning=1
persist.sys.use_dithering=0
persist.sys.use_16bpp_alpha=1
ro.min.fling_velocity=8000
ro.mot.eri.losalert.delay=1000
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
ro.telephony.call_ring.delay=0
debug.composition.type=c2d
persist.sys.composition.type=c2d
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
ro.fb.mode=1
ro.sf.compbypass.enable=0
hw3d.force=1
ro.product.gpu.driver=1
persist.sampling_profiler=0
hwui.render_dirty_regions=false
persist.sampling_profiler=0
persist.sys.ui.hw=1
ro.config.disable.hw_accel=false
video.accelerate.hw=1
debug.egl.profiler=1
debug.egl.hw=1
ro.vold.umsdirtyratio=20
hwui.disable_vsync=true
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
touch.pressure.scale=0.001
windowsmgr.max_events_per_sec=200
ro.min_pointer_dur=8
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
#3G tweaks [skip if it causes any performance drop]
ro.ril.hsxpa=2
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=28
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.gprsclass=12
ro.ril.hsupa.category=7
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
media.stagefright.enable-http=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-scan=true
media.stagefright.enable-record=true
#Indicator_Hack
captive_portal_detection_enabled=0
dalvik.vm.dex2oat-filter=interpret-only
dalvik.vm.image-dex2oat-filter=speed
#B4AD Project by @adblocker at [xda-developers.com]
#ENJOY
#End
Remember to set the permission to rw-r-r after editing ( If you don't do it your device gonna brick)
Technically it has to be compatible with any phone running Android OS but I am not responsible for any damage or UI FC
Please always pay attention to risk of soft bricking
If something goes wrong use your backup build.prop to get the default settings
Does it work for your phone ? tell me ( in details )
Send me feed backs about your phone before and after applying tweaks >> let me know !
ENJOY :good::good:
XDA:DevDB Information
build.prop Tweaks For Android (BT4A Project), Tool/Utility for all devices (see above for details)
Contributors
adblocker
Version Information
Status: Stable
Current Stable Version: 1.3
Stable Release Date: 2016-10-28
Created 2016-10-28
Last Updated 2016-10-28
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
Don't do anything, it was already proven.
ro.config.dha_tunnable=1 should be ro.config.dha_tunable=1
A good majority of these work beautifully.
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
great but i wish there was a flashable zip.that would have been easy
Hi...indicator hack not compatible with xposed framework i think
You can read that post, sorry is spanish
http://www.htcmania.com/showthread.php?t=1229420&page=2
The xposef framework needs the cache for modify.
You tell me
Works well with Samsung Galaxy S5 G900F, Nemesis Rom ( Note 7 port), android 6.0.1.Thank you.
Does it conflict with other mods like Lspeed or govtuner? Thanks
dinhvtai said:
Does it conflict with other mods like Lspeed or govtuner? Thanks
Click to expand...
Click to collapse
No.
thanks alot but i donnot like any tweek .i only need best codes for battery. please can you tell me wich codes make my battery excellent ???...i need to disable any tweek for good battery .thankz
dinhvtai said:
Does it conflict with other mods like Lspeed or govtuner? Thanks
Click to expand...
Click to collapse
Dor71 said:
No.
Click to expand...
Click to collapse
L SPEED already has almost all of these build.prop tweaks in it, it'll be "cos(90" work done to apply these and use L speed...
IMO, just use L speed...
dinhvtai said:
Does it conflict with other mods like Lspeed or govtuner? Thanks
Click to expand...
Click to collapse
Nope, it won't conflict.
Loo Ney said:
L SPEED already has almost all of these build.prop tweaks in it, it'll be "cos(90" work done to apply these and use L speed...
IMO, just use L speed...
Click to expand...
Click to collapse
Nope, not all, a lot of lines are useless on newer android version.
Sent from my Nexus 5 using Tapatalk
Can you make a list with the codes which don't affect the battery life, or at least have a small impact on that? Thanks for these codes man !!!
Maybe there a way or tool to check the tweaks, did it work or not. Thx
D-dy said:
Maybe there a way or tool to check the tweaks, did it work or not. Thx
Click to expand...
Click to collapse
+1
I am going to try this soon on my OnePlus 3 stock 3.2.7.
Thanks!
I wish I could push these to my stock / non-root device.
99% of these are a placebo and do nothing
http://forum.xda-developers.com/showthread.php?t=2544330
Dont waste your time with these
DSA said:
99% of these are a placebo and do nothing
http://forum.xda-developers.com/showthread.php?t=2544330
Dont waste your time with these
Click to expand...
Click to collapse
Like almost everything on xda for build.prop.
Sent from my Nexus 5 using Tapatalk
Paget96 said:
Like almost everything on xda for build.prop.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Yup, but people dont like reading anymore...:silly:
does it work on 4.1.2?
xn0live said:
does it work on 4.1.2?
Click to expand...
Click to collapse
Yeah!
Try it