Database Info

[Q] PLEASE HELP ME: Disaster Captivate

Hi all! I registerd now on forum but i'm an old noob reader of the forum. I
I bought Captivate(AT&T) on ebay and had Froyo 2.2 installed. I tryed to flash and root it to CYNOGENMOD with this GUIDE: wiki.cyanogenmod.com/wiki/Samsung_Captivate:_Full_Update_Guide
I did everything as written on thad guide but the phone continued to reboot and reboot and reboot. Now I don't even know what have I done but the phone starts with AT&T LOGO and than blocks with Samsung SGH i897 LOGO.
When i push volume buttons and start button it goes on CLOCKWORKMODRECOVERY.
Anyone can help me? I think i'm in big problem isn'it? PLEASE SOMEONE HELP!
(sorry for bad english)

alexmr89 said:
Hi all! I registerd now on forum but i'm an old noob reader of the forum. I
I bought Captivate(AT&T) on ebay and had Froyo 2.2 installed. I tryed to flash and root it to CYNOGENMOD with this GUIDE: wiki.cyanogenmod.com/wiki/Samsung_Captivate:_Full_Update_Guide
I did everything as written on thad guide but the phone continued to reboot and reboot and reboot. Now I don't even know what have I done but the phone starts with AT&T LOGO and than blocks with Samsung SGH i897 LOGO.
When i push volume buttons and start button it goes on CLOCKWORKMODRECOVERY.
Anyone can help me? I think i'm in big problem isn'it? PLEASE SOMEONE HELP!
(sorry for bad english)
Click to expand...
Click to collapse
Reflash CM7 through Clockworkmod. If it continues to boot loop, do a factory reset through clockworkmod.

Hi thank you very much for answering. I managed to restart it by flashing a new rom downloaded online, a Froyo 2.2. As I am a little idiot if I write down infos about my firmware would you gently link me to a guide or tell me what should I do to upgrade in order do not do any mistake again? Anyway phone is from At&T but I'd like to unlock operator in order tu use my Italian sim.(before i screwed it up it was unlocked, as i bought it USED from ebay.)
Anyway these are the infos:
Firmware version 2.2
Baseband version I897UCJI6
Kernel version [email protected] #1
Build number:Froyo.UCJI6.
THANK YOU VERY MUCH. Hope to hear from you

PS: I used this to restore it I897UCJI6-OCD-REV02-Low-designgears.exe and ODIN, if this has any importance!

It should be posted in the OP or there should be a link to sufficient installation instructions in the OP of whatever Rom you would like to flash.
And no need to start a thread in the General and same exact thread in Q & A.
NO need to double post.

Thread closed
I understand this is a plea for help, but do not crosspost. Continue this discussion properly placed post in Q&A.

B63M bricked?

Hi There,
Please forgive me I am a complete novice when it comes to Android phone.
I have a chinese Dual sim phone that I have routed with superoneclick. I have put clockworks recovery on it with rom manager as I was trying to create a copy of the ROM. I also installed Droid X Recovery Bootstrap, however in droid x I pressed the fix permission option and the phone started changing permissions everywhere and now my phone wont start. It keeps booting up in a loop and I cannot get to the recovery to wipe the memory and start again

What SOC does the device use?
If its Allwinner based, you could boot from mmc or reflash with livesuit.

21ss, thank you for the reply.
Sorry my friend, I have no idea what you mean by What SOC does the device use?
You say that you can boot from the mmc slot, please tell how and with what software.
Never heard of livesuit.
I have attached a word document in rar of the ebay item that I purchest.
Any help that you can give me would be very much appreciated.
At the moment I have a paper weight.
Regards chunky2.

similar problem /
chunky2 said:
21ss, thank you for the reply.
Sorry my friend, I have no idea what you mean by What SOC does the device use?
You say that you can boot from the mmc slot, please tell how and with what software.
Never heard of livesuit.
I have attached a word document in rar of the ebay item that I purchest.
Any help that you can give me would be very much appreciated.
At the moment I have a paper weight.
Regards chunky2.
Click to expand...
Click to collapse
Sir
i have a dual sim android 2.3.4 chineese mobile with brand name ilus
i have the same problem after rooting the phone , i opened ROM MANAGER and when clicked for backup , it asked for clockworkmod recovery and searched for the models , as i didnt find my model , i scrolled any other options, i found fix permission , when i clicked it permissions were altered and asked me to boot and when i went for boot the phone stopped booting and is in boot loop
Kindly help me how to recover the phone , as i dont have the custom rom
nvksrinivas

Hey guys the good thing about this phone is that you cant brick it, it cant be hard bricked easily... but I suggest you go to this discussion and find possible solutions, I had same issue and even tho I never managed to fully sort the issue, its because of my laziness... I could if I wanted, I managed to get it to a position I can use it and I have been using it like so for months now... here is the link http://forum.xda-developers.com/showthread.php?t=1618775&page=3

[Q] K-Touch Hornet II V9

Hello dear XDA-developers,
I am thinking of buying a new phone, so i came across this phone called the "K-Touch Hornet II V9", it is a Chinees phone. and I couldn't find it on xda-developers.com.
So I was wondering if it is possible to have a Custom Rom installed on it.
Maybe to create my own Custom Rom with this toolbox:http://www.xda-developers.com/andro...stallation-with-android-ultimate-toolbox-pro/
I have a technical background so I guess this should be manageable for me to understand.
Anyways hope to get some reactions on this topic.
Cheers, and many thnxs in advanced,
DesireDroid
Ps.: I currently have a HTC Desire (classic) and rooted that one. and installed some custom roms on it. like the Leedroid custom rom:

Hello,
I am interesting in your request because i have the same device.
Could you tell me if you found anything about an alternative ROM for the "K-Touch Hornet II V9" ?
Regards

ROM found
I've found a ROM (Cyanogen 10.1) at the following web site (i can't post a link due to my too young status) : needrom (add www end dot com )
Then add the following path : /mobile/k-touch-v9-2/

Sebraxx said:
I've found a ROM (Cyanogen 10.1) at the following web site (i can't post a link due to my too young status) : needrom (add www end dot com )
Then add the following path : /mobile/k-touch-v9-2/
Click to expand...
Click to collapse
how can i flash it? never flashed before with nvflash.

besmart1983 said:
how can i flash it? never flashed before with nvflash.
Click to expand...
Click to collapse
Hi, i justo bougth this K-touch V9 and i need to root and and Flash a Multilanguage ROM..
could somebody help me?
thanks!!

Succelfully ROOT K-Touch V9
Hi, las nigth I rooted the Phone whis this tool www . srsroot.com
I have selected the First Root method.
and the program tried to root the phone whith several different tools, and in the process make the phone reboot several times...
In the final steps i was very nervous becouse the phone was rebooting in a loop like half and hour... The Root program in my PC were telling me to wait 1 minute after the phone boot and press ok in the win window after that.
1 time the phone stop looping the boot, so then i tried to unlock the screen to check... but once i didt it, the phone starts to reboot in a loop again.
So, the next time i saw the phone boot ok, i didnt unlock the screnn. I just wait ti finish the boot and press the ok button in my PC.
An then the root program tells me that the root its OK!! The program finished intalling the Superuser.apk... And thats all...
I download Root Checker.apk and verify the succes root after agree to the Superuser App to allow root privileges to the aplication...
I rebooted again the phone and I checked that the root in permanet..
So, by now is how far a can go...
Now I need to intall the CMW 6.0.1.1 to finally Flash a ROM in Spanish and after that intall Gapps from Google...
The same program that root the phone, can make it reboot in recovery mode whit CWM 6.0.1 but in chinese, anyway helping me whit another phone whit the same recovery in English i can go on whit the program and made a Backup of the rooted phone... but i think i am not safe this way flashing a new rom becouse if something go wrong i cannot boot again this mode if i dont boot the phone first in the normal way...
Could anybody help me whit that?
I almost forget, my version of android of my Ktouch V9 is 4.0 and with CN/EN Languages
I hope i did will be helpfull
Bye!
Guillermo

I found k touch stock and custom rom on http://www.ndroidzone.com/

[Completed] NEED HELP with my HP SLATE 6 VOICE TAB

please help my Hewlett Packard slate 6 VOICETAB..no one talk about it even i search it at google,
i;ve problem crash not STarting with this gadget.and im confused to choose what ROM should i use.
i already do the factory reset..but still not startin up..
please somebody could you help me..
thanks

Ikuza27 said:
please help my Hewlett Packard slate 6 VOICETAB..no one talk about it even i search it at google,
i;ve problem crash not STarting with this gadget.and im confused to choose what ROM should i use.
i already do the factory reset..but still not startin up..
please somebody could you help me..
thanks
Click to expand...
Click to collapse
Hi,
Please can you describe with more details and clearly what exactly is your problem?
Apparently your device is a Hewlett Packard Slate 6 voicetab - OS: JB 4.2.2
Is your device rooted?
Last operation made ?
Don't forget that you need to be more explicit when you need help

philos64 said:
Hi,
Please can you describe with more details and clearly what exactly is your problem?
Apparently your device is a Hewlett Packard Slate 6 voicetab - OS: JB 4.2.2
Is your device rooted?
Last operation made ?
Don't forget that you need to be more explicit when you need help
Click to expand...
Click to collapse
yes my device was 4.2.2
Rooted
last operation i used rom toolbox change ondemand rate (i forgot the name)but the usual number was 10.000..i changed it to 50.000,then checked the apply to boot..
and the build prob i change the dalvik.vm.heapsize..from 256m to 48m
and then it stuck when startup.:crying:

Ikuza27 said:
yes my device was 4.2.2
Rooted
last operation i used rom toolbox change ondemand rate (i forgot the name)but the usual number was 10.000..i changed it to 50.000,then checked the apply to boot..
and the build prob i change the dalvik.vm.heapsize..from 256m to 48m
and then it stuck when startup.:crying:
Click to expand...
Click to collapse
Can you tell me where have you downloaded your rom?
And apparently,you have changed the governor and the frequencies of your kernel.
The only solution is to use your nandroid backup for restore your last version.
I'm really sorry but we haven't forum or thread about your device.
I will tried to find something for helping you

philos64 said:
Can you tell me where have you downloaded your rom?
And apparently,you have changed the governor and the frequencies of your kernel.
The only solution is to use your nandroid backup for restore your last version.
I'm really sorry but we haven't forum or thread about your device.
I will tried to find something for helping you
Click to expand...
Click to collapse
i download the rom from the official HP support..(sorry i cant put the link bcause not have 10 posts)so i attach a screenshot.
i dont have back up from nandroid..im just change it and reboot the device..so i dont have the backup :crying:
yeah i search it but no one in the forum talk about this device
apreciate it for your help sir :good:

You need to post the URL of the HP site. Also, without a backup it's going to be pretty difficult. You're going to have to find the factory image somewhere on the web. You did some pretty serious modifications as Ikuza27 eluded to. Good luck

wirelesshead65 said:
You need to post the URL of the HP site. Also, without a backup it's going to be pretty difficult. You're going to have to find the factory image somewhere on the web. You did some pretty serious modifications as Ikuza27 eluded to. Good luck
Click to expand...
Click to collapse
yes..but i cant post url before 10 post..mybad..yea i still trying to find it..but no one work for this device on custom recovey or cwm..
i already try fastboot..try sdk android fast boot but no device detected because the fastboot stuck..then i try adb ..its connect to the PC .but i dont know what recovery.img must used..someone tell me to used the similar specification phone..but what device that smilar with this device
already try the official from the HP support..but still installation aborted when already half way to success..
i buy this device at 10 may ..but now it not worked :crying:

Ikuza27 said:
yes..but i cant post url before 10 post..mybad..yea i still trying to find it..but no one work for this device on custom recovey or cwm..
i already try fastboot..try sdk android fast boot but no device detected because the fastboot stuck..then i try adb ..its connect to the PC .but i dont know what recovery.img must used..someone tell me to used the similar specification phone..but what device that smilar with this device
already try the official from the HP support..but still installation aborted when already half way to success..
i buy this device at 10 may ..but now it not worked :crying:
Click to expand...
Click to collapse
I'm really sorry but I cannot help you more. I've tried searching a link for a factory image or something that it can help you, but except the HP website for support, nothing.
For your next device, don't forget to do a nandroid backup before to do something.

[Q] Motorola Droid XY926

Hi all ,
i need some help please ,
i got a Verizon Motorola Droid HD XT926 , after updating to original KitKat 4.4.2 the device was crap !
so i used DROID_RAZR_HD_Utility_1.21.zip to downgrade without rooting (Big Mistake!!!) , any way the device is booting to language\welcome screen ,
and when selecting language the "initializing" it get stuck like that forever ,
tried fastboot several times , also flashing the recovery but nothings helps.
i've looked on many solutions but since the device is still locked my options are limited,
i do not have any backup unfortunately ,
besides pointing out my mistakes , can any one please help?
Thanks

Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck

ayawaska said:
Hi all ,
i need some help please ,
i got a Verizon Motorola Droid HD XT926 , after updating to original KitKat 4.4.2 the device was crap !
so i used DROID_RAZR_HD_Utility_1.21.zip to downgrade without rooting (Big Mistake!!!) , any way the device is booting to language\welcome screen ,
and when selecting language the "initializing" it get stuck like that forever ,
tried fastboot several times , also flashing the recovery but nothings helps.
i've looked on many solutions but since the device is still locked my options are limited,
i do not have any backup unfortunately ,
besides pointing out my mistakes , can any one please help?
Thanks
Click to expand...
Click to collapse
do you want to go back to stock kitkat? then use this fxz/sbf from @SamuriHL http://forum.xda-developers.com/droid-razr-hd/general/fxz-4-4-2-183-46-15-t2873083
if you want to do something else ask and i will tell you if it is possible i think you are unlocked because you were able to downgrade so you have custom rom options too

billycar11 said:
do you want to go back to stock kitkat? then use this fxz/sbf from @SamuriHL http://forum.xda-developers.com/droid-razr-hd/general/fxz-4-4-2-183-46-15-t2873083
if you want to do something else ask and i will tell you if it is possible i think you are unlocked because you were able to downgrade so you have custom rom options too
Click to expand...
Click to collapse
Thanks bilycar ! i will try that and let you know.:good: