Does the entitlement hack for native mobile hotspot also enable free USB tethering? - Verizon Galaxy S 5 General

Greetings. I have been using entitlement hacks to enable the mobile hotspot for about 3 years now across many android versions, from JB, to KK, to LP. All this time I have always wanted to try tethering via USB to the computer via the native tethering app inside the stock rom but never thought it would work. Recently I bought a CradlePoint router that I have been using for WiFi-As-WAN. It has come to the point where speeds here are so fast that the limiting factor in my speed is the Wireless N interference in the phone-to-router bridge. If I plug in my phone via USB to my router (or any router/computer that uses "phone as modem") will it work the same way as wifi tether or will it try using a different APN or something and charge me for the data? I know nothing is 100% but if anyone has tried it I would love to know the results. Thanks.

Related

Reverse Tether

I didn't know whether to put this in the "Android Software Development" forum or this one but does anyone know of an app that can preform reverse tether (with the help of tweaking the computers network) via USB and at the same time tether via WiFi.
ie: The phone will use the computer's internet via USB and then allow other devices to connect to the phone via WiFi and use the original computers internet. Basically turning the phone into a mini-router.
I don't know if this would even be possible. Seems like there would be a lot of data clutter. But I have seen apps out there that can preform reverse tether via WiFi on an ad hoc network.
I assume that if I can get at least the USB reverse tethering to work. I'd be able to use Froyo's built in WiFi tethering also assuming it uses the computers network and not default to 3G.
And the reason for even needing this app?
Is because 20Mbs > 3Mbs.
Nexus One
CyanogenMod-6.0.0 RC1
A Wireless G Router can be had for less than $20.00 - You can probably find a friend with an old one to give to you.
http://www.newegg.com/Store/SubCategory.aspx?SubCategory=145&name=Wireless-Routers
Why use the phone for this?
I don't know how to get it to work but on Android in a vm it says on the Android that the internet is being tethered to it through Ethernet I don't know If its an app ill take a screen shot later
Sent from my HTC Hero using XDA App

USB Tether settings for Mac OS X?

Power is out at our house, seems to go out ever once in a while, whole entire neighborhood. Looking to get USB tethering up and going on Mac Os X with 4G Lte but it is asking for modem settings, apn, and account number, password. Anyone get USB tethering up and running on mac os x with the default samsung tethering application?
Ur better off using the wifi tethering and just charging the phone off the USB port, this will work better without having to set all that up
I would like to know also as I am not getting the same speeds when I am using the portable wi-fi hotspot option. When I do a speedtest on my phone Im getting like 12 MB/s download on 4G LTE. However when connected via hotspot, my mac laptop only gets like 2 MB/s. Just wondering if usb tether would get higher speeds.
I tried adding the device as a modem in the network preferences on my mac but could not get it to work. Not sure if I have the right settings.

How to connect Android to the internet via USB - New Reverse tether app

This is a new app, that allows you to reverse tether your android (access your computer's connection via usb).
It doesn't require any extra software, or windows installations, or ADB/debugging, or tech savviness, and your connection looks like 3G so that all your apps work seamlessly including Market, Downloads and Talk. it requires a rooted device.
As you can see the process is very simple and takes only a few seconds... the app is called Reverse Tether and it's on the android market now.
A new version has been released
thanks.....
Thanks for this. By any chance would this happen to work on USB Dongles? And how would you setup the connection?
I can't see why not. Just use the wizard that is integrated in the app to help you set it up. The best way to find out really is to try it yourself, worst case senario you uninstall it.
not working
Hi!
I'm trying to do this on a droid x with the Apex ROM. When I start the app, it says "Failed to start Tethering. Make sure this device supports or allows Tethering. Otherwise, you won't be able to use this app.
There's not a whole lot of instructions on how to do a 'usb reverse tether' out there with this app. I have my connection set to "PC Mode" and I'm running on osx. I have to imagine that there's something special that needs to be done on the PC end that the instructions just aren't saying...
Thanks
wiz561 said:
There's not a whole lot of instructions on how to do a 'usb reverse tether' out there with this app. I have my connection set to "PC Mode" and I'm running on osx.
Click to expand...
Click to collapse
You don't need any instructions. It's just one button you click it and it's supposed to connect you.
Maybe it's because you have your connection set to "PC MODE"??? Dunno.
On some phones like mine, when it's set to PC mode you can't do anything else with it. So try to turn off PC mode, if you can't then set it to debugging, that will turn off for sure.
You can also test if tethering works on your device by going to settings > wireless and network - and enabling Tethering yourself.
Just curious as to why you would need this?
The phone has WiFi and/or the network.
thanks
Thanks for the info. I'll have to try this. I guess I just have a hard time believing that you just plug the phone in the computer and it automagically works. I would imagine you would have to bridge usb0 or do something.
I tried to enable the 'tether' mode and the computer sees usb0, but that's about as far as I get with it.
As for why I'm doing it... I don't want to be mean, rude, or start anything, but because I have to. I get annoyed because most of the 'reverse tether' threads ask 'why' and 'why not just use wifi', instead of posting something useful. Here's the reason.
When I'm at work, I'm in the middle of nowhere. I get no cell signal, even if trying to use a wilson repeater. I also get no wifi, since the AP's are far away from me. I can't install my own AP because of policies, so what other option do I have? Either a BT PAN or a USB reverse tether. I'm kinda pissed about it and why Verizon won't install anything to get a signal. I'm paying 90 bucks a month and can't use my phone for 8 hours a day.
Once you enable tether, keep it on and try running the app again while it's on. Maybe that will work.
Also, sorry, yes there's a guide in the app that helps you set up your computer, but it's just sharing, a one time thing.. you don't need to bridge anything. But to get there you need to get tether option working.
daybis13 said:
Just curious as to why you would need this?
The phone has WiFi and/or the network.
Click to expand...
Click to collapse
Why?
Not everyone have an unlimited mobile data plan. And if you have a limited plan, they're usually very expensive, so when you're at home or at work or at school why not spare your bytes and money?
And not everyone have access to WIFI or even need WIFI, it's silly to setup a WIFI network just for your phone. Besides, USB is musch faster, and more secure.
And since you're already connected to USB to recharge or sync, why not also have unlimited super fast internet for free?
RainZzz said:
Why?
Not everyone have an unlimited mobile data plan. And if you have a limited plan, they're usually very expensive, so when you're at home or at work or at school why not spare your bytes and money?
And not everyone have access to WIFI or even need WIFI, it's silly to setup a WIFI network just for your phone. Besides, USB is musch faster, and more secure.
And since you're already connected to USB to recharge or sync, why not also have unlimited super fast internet for free?
Click to expand...
Click to collapse
agree... :thumbup::thumbup:
Sent from my PHONE
RainZzz said:
Why?
Not everyone have an unlimited mobile data plan. And if you have a limited plan, they're usually very expensive, so when you're at home or at work or at school why not spare your bytes and money?
And not everyone have access to WIFI or even need WIFI, it's silly to setup a WIFI network just for your phone. Besides, USB is musch faster, and more secure.
And since you're already connected to USB to recharge or sync, why not also have unlimited super fast internet for free?
Click to expand...
Click to collapse
Yeah, I'm agree with RainZzz. This threads is useful. Thanks
Sent from my GT-I9100 using xda premium
droid x
I'm wondering, has anybody got this working on a droid x with the Apex rom? I've just about tried everything. USB Tethering loads drivers in Windows and works fine. The reverse tethering app still says the same error message. I'm starting to wonder if it's not compatible with the dx.
Thanks!
Hey wiz561, have you by any chance tried the most recent version? It seems like your issue have been fixed according to What's New.
If you don't have access to update, you can dowload the Reverse Tether APK file from the developer's website.
Dongle Support
Not compatible with the Transformer Prime. Though I'd instantly donate if it would allow dongles to work.
My question earlier was referring to the compatibility of this app with 3G/4G dongles. I ask because aren't dongles required to connect first via their dashboard/software before sharing the internet via USB? If that's the case, how then would this app reverse tether the dongle's connection? Is there a settings page for these things?
I wonder if it doesn't work for some of us because we have a LAN connection instead a wifi router or ethernet cable connection as the app says...
bad.bad.bad, when you connect your dongle, aren't you supposed to see its own Network Adapter in your Network Connections? I mean that's how Windows works. So just follow the same steps but share that network adapter instead.
Same goes for Netagirl, an ethernet connection is a LAN connection. So whichever network adapter connects you to the internet, share it with your phone's network that is created by the app.
RainZzz said:
bad.bad.bad, when you connect your dongle, aren't you supposed to see its own Network Adapter in your Network Connections? I mean that's how Windows works. So just follow the same steps but share that network adapter instead.
Same goes for Netagirl, an ethernet connection is a LAN connection. So whichever network adapter connects you to the internet, share it with your phone's network that is created by the app.
Click to expand...
Click to collapse
Yeah, I think I made a mistake, my connection from my pc to my external modem, is not via ethernet but USB, so I don't know if that affects. And yes, I do exactly what you said and the app says that I have to respect trial's limitation, at every single hour I'd try =/
I wonder how much battery consumption will reduce using this over wifi tethering... gonna have to try it out. Thanks

[Q] Motorola Photon Q Tether

Hi all. I am reaching out for some help.
I have unlocked my Photon Q and installed Superuser so now my phone is rooted. I have done the root checker and its verified that I am rooted. I have a reboot app that I use to do a quick reboot and works perfect because it required a rooted phone.
My problem is, whether I use Wifi Tether or FoxFi (and I have the latest release), the hotspot will turn on and show running and my computer will connect to the hotspot but the speeds are soooooooo slow that it actually times out.
I have done speedtests in the areas that I am trying to use the hotspot and will get 1.5 megs down easy. But when I use the hotspot, the speeds die down to almost nothing.
Anyone know of a fix? Should I lock the bootloader again? Any help would be appreciated!!
Thank you!!
Found Fix
Just found this and it works: WiFi Tether: use "Generic ICS" device type and check routing fix and MMS clamping
I have slow tethering speeds using Wifi Tether as well, but trying what you did didn't work. My phone Speedtests around 750-350kbps on 3G, but the tethering caps around 75-50kbps.
Sent from my XT897 using Tapatalk 2
If you are tethering to a PC I HIGHLY recommend you tether via USB. I have seen SIGNIFICANT speed differences through USB. Good Ole PDA Net does it for me! ;]
Yup, USB tether is quite a bit faster. Good find, thanks!
JamesChilds said:
If you are tethering to a PC I HIGHLY recommend you tether via USB. I have seen SIGNIFICANT speed differences through USB. Good Ole PDA Net does it for me! ;]
Click to expand...
Click to collapse
dpwhitty11 said:
Yup, USB tether is quite a bit faster. Good find, thanks!
Click to expand...
Click to collapse
I'm trying to use the built-in USB tether option (Settings -> Tethering & Mobile Hotspot -> USB Tethering is checked) and it does not work.
Now my Win7 PC does "see" a new RNDIS connection (creates a new 'local area connection' icon in Network Connections), and when I click on that connection I do see that it has an IP address/default gateway. I am able to ping the default gateway, however, I am not able to ping 8.8.8.8 or get to the internet.
I was using an app for wifi tethering previously, but that killed the battery so quickly USB charging couldn't keep up - it was draining faster than it was charging... I've used USB tethering in the past, and when it's possible I vastly prefer it - for the obvious reasons, and the ones listed above.
So is there a 'trick' to get USB tethering to work? Everything appears to be in place and functional, but the final step of getting online is just not working!
Sorry if the OP thinks I'm thread-jacking, I can create another thread - but this one seemed appropriate to post in for my issue.
Thanks!!
arrrghhh said:
I'm trying to use the built-in USB tether option (Settings -> Tethering & Mobile Hotspot -> USB Tethering is checked) and it does not work.
Now my Win7 PC does "see" a new RNDIS connection (creates a new 'local area connection' icon in Network Connections), and when I click on that connection I do see that it has an IP address/default gateway. I am able to ping the default gateway, however, I am not able to ping 8.8.8.8 or get to the internet.
I was using an app for wifi tethering previously, but that killed the battery so quickly USB charging couldn't keep up - it was draining faster than it was charging... I've used USB tethering in the past, and when it's possible I vastly prefer it - for the obvious reasons, and the ones listed above.
So is there a 'trick' to get USB tethering to work? Everything appears to be in place and functional, but the final step of getting online is just not working!
Sorry if the OP thinks I'm thread-jacking, I can create another thread - but this one seemed appropriate to post in for my issue.
Thanks!!
Click to expand...
Click to collapse
Use a USB tethering app? Like PDA Net or something.
Sent from my GT-N8013 using Tapatalk HD
dpwhitty11 said:
Use a USB tethering app? Like PDA Net or something.
Click to expand...
Click to collapse
Native USB tether doesn't work? The option is there, and it seems to connect... Like I said I get the RNDIS connection, so it seems to be functional. Just no internets.
I can try a third-party app, but would really rather not... especially if I have to pay for said app, when this functionality is built-in.
arrrghhh said:
Native USB tether doesn't work? The option is there, and it seems to connect... Like I said I get the RNDIS connection, so it seems to be functional. Just no internets.
I can try a third-party app, but would really rather not... especially if I have to pay for said app, when this functionality is built-in.
Click to expand...
Click to collapse
i think that's the thing about Sprint and the unlimited data plant(assuming you have service with them): they don't let you tether for free. Both the native wifi and usb tethering seem to require a subscrption... i get a popup on the phone saying it can't connect because i am not subscribed or whatever.
I use PdaNet+, aka FoxFi i believe, and it works well for usb tethering. I think the free version just has a usage limit.
Oh, i've seen the native hotspot hacked to work for free on some Samsung Sprint phones... not sure if the specifics are universal or not:
http://forum.xda-developers.com/showthread.php?t=1760712
yogi2010 said:
i think that's the thing about Sprint and the unlimited data plant(assuming you have service with them): they don't let you tether for free. Both the native wifi and usb tethering seem to require a subscrption... i get a popup on the phone saying it can't connect because i am not subscribed or whatever.
I use PdaNet+, aka FoxFi i believe, and it works well for usb tethering. I think the free version just has a usage limit.
Oh, i've seen the native hotspot hacked to work for free on some Samsung Sprint phones... not sure if the specifics are universal or not:
http://forum.xda-developers.com/showthread.php?t=1760712
Click to expand...
Click to collapse
Thanks for the response.
Wifi tethering works - although it does require a third party app. The built-in method didn't seem to work, and I didn't think there was a free USB tether app like there is for wifi tethering.
I guess USB tethering is the same deal, as I do not pay for any additional "tethering" options on my plan... But I've never gotten any nastygrams/popups about how I do not have the proper plan... hum.
I'll see if I can find an app that'll do it for free. Thanks again.
If anyone knows how to get the native method to work, let me know - just odd that everything seems to work, except for the actual connection part.
arrrghhh said:
Thanks for the response.
Wifi tethering works - although it does require a third party app. The built-in method didn't seem to work, and I didn't think there was a free USB tether app like there is for wifi tethering.
I guess USB tethering is the same deal, as I do not pay for any additional "tethering" options on my plan... But I've never gotten any nastygrams/popups about how I do not have the proper plan... hum.
I'll see if I can find an app that'll do it for free. Thanks again.
If anyone knows how to get the native method to work, let me know - just odd that everything seems to work, except for the actual connection part.
Click to expand...
Click to collapse
I just tried the native hotspot and usb tether again, and i didn't get any popup this time. So i think it is possible to not get a message but still have it be blocked in the ROM. On hotspot i could get it to connect but with no internet access.
If i get time and motivation, i might try messing around with the hack that i linked from the Epic 4G Touch, and seeing if i could make it work here. It doesn't look overly complicated as far as things go? And i've been meaning to learn about de- and re-compiling.
I use "Barnacle" for WIFI and "easytether" for usb. Both are decent but I have noticed Barnacle will fail sometimes when connected for a long period of time.
hfase said:
I use "Barnacle" for WIFI and "easytether" for usb. Both are decent but I have noticed Barnacle will fail sometimes when connected for a long period of time.
Click to expand...
Click to collapse
I used easytether in the past, I will try it again. I just tried SVTP Lite, and the USB Tether option said "not available".
I tried to download PDANet, but the Play Store said my carrier did not allow this app to be downloaded..... dafaq.
Edit - got EasyTether to work, but of course I didn't pay for it and the 'lite' version is pretty restricted. It's still slow as all get-out, so I must be in a black hole for service - I have 3-4 bars of 3g, but I am inside a concrete building.
Oh well. I guess I'll stick to wifi tethering as it's free, and unrestricted. I was hoping to find something similar for USB tethering, but it seems there is none... Let me know if you guys find something I missed. Thanks!
arrrghhh said:
I used easytether in the past, I will try it again. I just tried SVTP Lite, and the USB Tether option said "not available".
I tried to download PDANet, but the Play Store said my carrier did not allow this app to be downloaded..... dafaq.
Edit - got EasyTether to work, but of course I didn't pay for it and the 'lite' version is pretty restricted. It's still slow as all get-out, so I must be in a black hole for service - I have 3-4 bars of 3g, but I am inside a concrete building.
Oh well. I guess I'll stick to wifi tethering as it's free, and unrestricted. I was hoping to find something similar for USB tethering, but it seems there is none... Let me know if you guys find something I missed. Thanks!
Click to expand...
Click to collapse
You can get the apk for PDANet off the internet and install it that way.
Sent from my XT897 using Tapatalk 2
dpwhitty11 said:
You can get the apk for PDANet off the internet and install it that way.
Click to expand...
Click to collapse
Indeed, and done. Doesn't seem to be any faster than wifi tethering, and my battery still drains faster than it can charge when using it.....
So unless there's a free unrestricted method for USB tethering, I guess I will stick with wifi tethering, as it is free AND unrestricted
I'm currently running the cdma modded cm10 but hotspot wasnt working for me then i came across the evo lte forum forum.xda-developers.com/showthread.php?t=1704991 and added that line to my build.prop now the built-in usb and wifi tether work
Sent from my XT897 using xda app-developers app
arbosus said:
I'm currently running the cdma modded cm10 but hotspot wasnt working for me then i came across the evo lte forum forum.xda-developers.com/showthread.php?t=1704991 and added that line to my build.prop now the built-in usb and wifi tether work
Sent from my XT897 using xda app-developers app
Click to expand...
Click to collapse
Strange, I just installed the latest CM10 for CDMA... and after a bit of fudging to get service/data working at all, wifi hotspot works out of the box.
Make sure you're on the newest build.
On Stock ROMS just use ISWAT Tether unlocker from the market, then use the stock tethering app
https://play.google.com/store/apps/details?id=com.tetherunlocker&hl=it
It works fine even in ICS altough is made to overcome the general android changes introduced with JB 4.1.2.
You have to launch it once before using the stock tethering app (or buy the full version which is always active).
The Solutor said:
On Sock ROMS just use ISWAT Tether unlocker from the market, then use the stock tethering app
https://play.google.com/store/apps/details?id=com.tetherunlocker&hl=it
It works fine even in ICS altough is made to overcome the general android changes introduced with JB 4.1.2.
You have to launch it once before using the stock tethering app (or buy the full version which is always active).
Click to expand...
Click to collapse
Thanks so much for posting about this one...
I had tried several wifi tether options on my Photon and none seemed to work. Some I couldn't even see the hotspot, some I could and could connect but the actually connection wouldn't work (i.e load pages).
Just tried the app above and it works flawlessly. I'll use it sparingly a bit, and make sure to check my next bill to ensure that Sprint doesn't ding me for a hotspot charge, but at least from a functionality approach it works great!
:good:
Coucher said:
Thanks so much for posting about this one...
Click to expand...
Click to collapse
You're welcome !
I had tried several wifi tether options on my Photon and none seemed to work. Some I couldn't even see the hotspot, some I could and could connect but the actually connection wouldn't work (i.e load pages).
Click to expand...
Click to collapse
Frankly I was really surprised to see Photon's behavior, being mine on ICS (usually I use GB,ICS, or JB 4.1.1 purposely to avoid tethering problems), so I guessed that Sprint anticipated Google's move.
Looks like I was right.
Just tried the app above and it works flawlessly. I'll use it sparingly a bit, and make sure to check my next bill to ensure that Sprint doesn't ding me for a hotspot charge, but at least from a functionality approach it works great!
Click to expand...
Click to collapse
The app is written by an Italian to avoid the tethering charges from Vodafone Italy, that Vodafone users are facing since the release of JB 4.1.2, i guess the same should apply to Sprint users in the US, but obviously I can't be sure .

[Q] tethering question

I have unlimited data, and I also pay the extra 30.00 for the hotspot feature. For some reason when I try to tether via USB (so my phone can also be charging, and since it's generally more reliable) I seem to get the connection dropped within 60-90 seconds after I'm using it.
If I use the mobile hotspot app and just tether via wifi, the conniption works flawlessly. I was wondering if I'm missing a setting somewhere, or if the built in USB tethering is just plain crapola. Any assistance would be appreciated. Thanks.
boxermansr said:
I have unlimited data, and I also pay the extra 30.00 for the hotspot feature. For some reason when I try to tether via USB (so my phone can also be charging, and since it's generally more reliable) I seem to get the connection dropped within 60-90 seconds after I'm using it.
If I use the mobile hotspot app and just tether via wifi, the conniption works flawlessly. I was wondering if I'm missing a setting somewhere, or if the built in USB tethering is just plain crapola. Any assistance would be appreciated. Thanks.
Click to expand...
Click to collapse
Never heard of such a thing... Perhaps the location where you leave your phone while its plugged in has poor reception.
Try leaving the phone in that spot without tethering and stream a long YouTube video or something like that...
Sent from my Galaxy Nexus using Tapatalk
boxermansr said:
I have unlimited data, and I also pay the extra 30.00 for the hotspot feature. For some reason when I try to tether via USB (so my phone can also be charging, and since it's generally more reliable) I seem to get the connection dropped within 60-90 seconds after I'm using it.
If I use the mobile hotspot app and just tether via wifi, the conniption works flawlessly. I was wondering if I'm missing a setting somewhere, or if the built in USB tethering is just plain crapola. Any assistance would be appreciated. Thanks.
Click to expand...
Click to collapse
Can't help, but have you tried the clockworkmod USB tethering app?
I just ended up installing FoxFi and it works just fine for USB tethering. No clue why the built in feature (for USB tethering) would crap out. Connecting wirelessly worked great with the stock hotspot app, but USB just didn't. I'm in a very strong signal area so it had nothing to do with that.

Categories

Resources