[Completed] alcatel one touch fierce 2 booting problem - XDA Assist

recently updated my alcatel one touch fierce 2 and waited for the update. went fine up until the system recovery 3e came up. did all the options including wipe data/factory reset and wipe cache partition. tried reboot system now, but the whole process returns back to its default of system recovery. please help with what to do to get out of loop.
-ps i dont know much about rooting but am willing to try and learn.

XDA Visitor said:
recently updated my alcatel one touch fierce 2 and waited for the update. went fine up until the system recovery 3e came up. did all the options including wipe data/factory reset and wipe cache partition. tried reboot system now, but the whole process returns back to its default of system recovery. please help with what to do to get out of loop.
-ps i dont know much about rooting but am willing to try and learn.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
There are no specific forums for your device on XDA.
However, if you create an XDA account, you can post your question here:
Android Q&A
You'll receive expert advice there.
Good luck and welcome to XDA!

Related

[Completed] [Q] Stuck in recovery loop after using Rashr Flash Tool

Phone: LG Spectrum
ROM: Cyanogen 10.1 3 or something
CWM Touch 6.0.4.7
So I was in the process of manually installing CWM Touch via Rashr Flash Tool, and when I successfully got it installed, the app asked if I wanted to reboot into recovery. So I pressed yes, and it did.
Unfortunately, whatever that app wrote into the androids system, it never seemed to remove it afterwards because after every single reboot, it kept going back to recovery, not loading the android OS. Even when I explicitly chose "reboot to bootloader" in CWM, it would still reboot to recovery. I've even went to a totally stock restore, and it still kept happening. Cleared cache, data, davik cache, same result. What can I do?
I currently have 2 restores. One of cyanogen, where i used Rashr's tool, and the other a V6 stock restore.
Hi there,
I'm sorry but I can't find anything related to your question.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA forums:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] Help with cyanogen recovery loop problem

I installed and flashed cm12 on my samsung galaxy s2 sgh t989 from cwm recovery and it was successful. After some time i had to check some things in developers options and there was something like that said update recovery with the cyanogemod updates and I checked it or turned it on, and then after a day I decided to go back to my original rom that I had backed up, which was CM11. So I went into recovery but it wasnt cwm recovery it was cyanogen recovery and it was useless because it didnt have restore or backup options, but then I accidently click delete cache parition or whatever its called. After that I rebooted my phone from the recovery but it didnt boot instead it took me to cyanogen recovery. I tried to wipe and delete all user data and some other options that i thought might help and then reboot but stills takes me to cyanogen recovery. I tried flashing cm12 and gapps that i had in sdcard but wontfinish to complete and then it takes me to the recovery. Any help would be appreciated.
XDA Visitor said:
I installed and flashed cm12 on my samsung galaxy s2 sgh t989 from cwm recovery and it was successful. After some time i had to check some things in developers options and there was something like that said update recovery with the cyanogemod updates and I checked it or turned it on, and then after a day I decided to go back to my original rom that I had backed up, which was CM11. So I went into recovery but it wasnt cwm recovery it was cyanogen recovery and it was useless because it didnt have restore or backup options, but then I accidently click delete cache parition or whatever its called. After that I rebooted my phone from the recovery but it didnt boot instead it took me to cyanogen recovery. I tried to wipe and delete all user data and some other options that i thought might help and then reboot but stills takes me to cyanogen recovery. I tried flashing cm12 and gapps that i had in sdcard but wontfinish to complete and then it takes me to the recovery. Any help would be appreciated.
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Should be able to find a flash-able zip for CWM (for this device) and flash it in CM recovery, then your backup will be waiting for you.. If things were that easy though...
At any rate, please go ahead and create an XDA account, so you can post in other forums. Then, add a post of your predicament in the > T-Mobile Samsung Galaxy S II SGH-T989 > T-Mobile Samsung Galaxy S II Q&A, Help & Troubleshooting thread. Your device experts can be found there.
Hope this helps, and good luck!

[Completed] Please I need help with cyanogen recovery problem.

I installed and flashed cm12 on my samsung galaxy s2 sgh t989 from cwm recovery and it was successful. After some time i had to check some things in developers options and there was something like that said update recovery with the cyanogemod updates and I checked it or turned it on, and then after a day I decided to go back to my original rom that I had backed up, which was CM11. So I went into recovery but it wasnt cwm recovery it was cyanogen recovery and it was useless because it didnt have restore or backup options, but then I accidently click delete cache parition or whatever its called. After that I rebooted my phone from the recovery but it didnt boot instead it took me to cyanogen recovery. I tried to wipe and delete all user data and some other options that i thought might help and then reboot but stills takes me to cyanogen recovery. I tried flashing cm12 and gapps that i had in sdcard but wontfinish to complete and then it takes me to the recovery. Any help would be appreciated.
androiddude313 said:
I installed and flashed cm12 on my samsung galaxy s2 sgh t989 from cwm recovery and it was successful. After some time i had to check some things in developers options and there was something like that said update recovery with the cyanogemod updates and I checked it or turned it on, and then after a day I decided to go back to my original rom that I had backed up, which was CM11. So I went into recovery but it wasnt cwm recovery it was cyanogen recovery and it was useless because it didnt have restore or backup options, but then I accidently click delete cache parition or whatever its called. After that I rebooted my phone from the recovery but it didnt boot instead it took me to cyanogen recovery. I tried to wipe and delete all user data and some other options that i thought might help and then reboot but stills takes me to cyanogen recovery. I tried flashing cm12 and gapps that i had in sdcard but wontfinish to complete and then it takes me to the recovery. Any help would be appreciated.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble but fortunately there is an XDA area dedicated to the T-Mobile Samsung Galaxy S II SGH-T989 at http://forum.xda-developers.com/galaxy-s2-tmobile which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/galaxy-s2-tmobile/help where the experts familiar with your device will be best able to guide you.
Good luck!

[Completed] Need Help with Pendo Pad 7 Model no.PNDPP44QC7 with Kitkat 4.4

Hopefully someone can help me, my child has a Pendo Pad 7 Model no.PNDPP44QC7 with Kitkat 4.4 and it ended up with lots of malware/viruses and barely usable. This tablet only has a power button and no other buttons so I did not know how to boot into recovery mode to do factory reset and after trying reset through settings which made no difference so I gave the device ROOT access so I could try and delete the malware etc but of course i did not do any sort of backup and did not add CWM or TWRP recovery. I ended up deleting something wrong and now the device just hangs on the Pendo logo screen. I have since worked out how to boot into Recovery Mode and also Fastboot mode now but a bit too late I tried to do a wipe data/factory reset and this made no difference still hangs on Pendo logo.
I can't seem to find a CWM or TWRP image file to suit the tablet and possibly try putting tablet into fastboot mode and using ADB on computer and flash the recovery to tablet. ???
in recovery mode options i get are
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
but i can not seem to find any correct files to work with this tablet any help to get this tablet working again would be much appreciated Thanks
bobs353 said:
Hopefully someone can help me, my child has a Pendo Pad 7 Model no.PNDPP44QC7 with Kitkat 4.4 and it ended up with lots of malware/viruses and barely usable. This tablet only has a power button and no other buttons so I did not know how to boot into recovery mode to do factory reset and after trying reset through settings which made no difference so I gave the device ROOT access so I could try and delete the malware etc but of course i did not do any sort of backup and did not add CWM or TWRP recovery. I ended up deleting something wrong and now the device just hangs on the Pendo logo screen. I have since worked out how to boot into Recovery Mode and also Fastboot mode now but a bit too late I tried to do a wipe data/factory reset and this made no difference still hangs on Pendo logo.
I can't seem to find a CWM or TWRP image file to suit the tablet and possibly try putting tablet into fastboot mode and using ADB on computer and flash the recovery to tablet. ???
in recovery mode options i get are
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
but i can not seem to find any correct files to work with this tablet any help to get this tablet working again would be much appreciated Thanks
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.You can post your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you
___
v7
XDA Assist

[Completed] How to install Sero 7 (UK) recovery ROM

My Sero 7 (UK) is stuck at logo screen. I can boot to recovery (after I have disconnected the battery and reconnected back). The recovery menu offers:
Apply update from ADB
wipe data/factory reset
wipe cache partition
Apply update from sdcard
The device is not rooted. Is it still possible to install Philz Touch Recovery in order to install DoPa v2.51?
Greatly appreciated if anyone can help.
I have posted this on the Q&A section of another forum:
http://forum.xda-developers.com/android/help/qa-sero-7-pro-aosp-4-4-4r2-dopa-v2-51-t2924457/page7
Not sure if it is being monitored.
tkcx said:
My Sero 7 (UK) is stuck at logo screen. I can boot to recovery (after I have disconnected the battery and reconnected back). The recovery menu offers:
Apply update from ADB
wipe data/factory reset
wipe cache partition
Apply update from sdcard
The device is not rooted. Is it still possible to install Philz Touch Recovery in order to install DoPa v2.51?
Greatly appreciated if anyone can help.
I have posted this on the Q&A section of another forum:
http://forum.xda-developers.com/android/help/qa-sero-7-pro-aosp-4-4-4r2-dopa-v2-51-t2924457/page7
Not sure if it is being monitored.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. If you haven't already, I'd recommend using the wipe cache partition choice first, then rebooting. If that doesn't work, you should do the factory reset. You'll lose your data but you may have a working device. Which you clearly don't at the moment. Any further questions can be posted here:
Android Q&A, Help & Troubleshooting
Good luck!

Categories

Resources