Related
Hello, wasnt sure where to put this thread, so i put it here.
I tried to root my GS3, that vent very wrong, now i cant start my phone, it only say "Samsung Galaxy S III" and thats it,
i tried to get back to stock using Odin, but odin stops at "Nand write start"
tried re-partionating with new Pit file, same problem still as above, (used pit file for 16gb, witch my phone is) when i do this with odin everything works fine, until im im putting Stock firmware into "pda" in odin, then it locks "nand write start"
Hard reset dont work, (pwr-home-volume Up) does nothing, but i can get my phone into download mode,
Usb Debugging was on before we started,
Unknown sources was on.
everything "kies" shut of
tried diffrent USB cables and ports.
Branded Yes.
event tried with Antivirus and firewall shut off.
anyone know what i can try next? cant it be anything with Bootloader or the kernel?
thanks alot for answers
and sorry for bad english.
glennisn said:
Hello, wasnt sure where to put this thread, so i put it here.
I tried to root my GS3, that vent very wrong, now i cant start my phone, it only say "Samsung Galaxy S III" and thats it,
i tried to get back to stock using Odin, but odin stops at "Nand write start"
tried re-partionating with new Pit file, same problem still as above, (used pit file for 16gb, witch my phone is) when i do this with odin everything works fine, until im im putting Stock firmware into "pda" in odin, then it locks "nand write start"
Hard reset dont work, (pwr-home-volume Up) does nothing, but i can get my phone into download mode,
Usb Debugging was on before we started,
Unknown sources was on.
everything "kies" shut of
tried diffrent USB cables and ports.
Branded Yes.
event tried with Antivirus and firewall shut off.
anyone know what i can try next? cant it be anything with Bootloader or the kernel?
thanks alot for answers
and sorry for bad english.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1331782 Here you can see how to make so called "restore cable", maybe more luck with this one?
correct Pit file solved everything btw Usb Jig dont do anything to GS3 exept starting download mode
I am currently having this same problem, and what I get back from Odin is (when I try to use the PIT file to repartition)
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Now I'm guessing I used the right PIT file, but I really don't know what I'm doing with it.
So I was trying to root my phone. Kinda went through a quick crash course of it with Odin. For some reason it kept hanging up at boot.img but that's a different story. Long story short, after numerous tries, I forgot to unclick repartition. Why it clicks itself when you load up the PIT is beyond me. Personally, I think the developer got a kick out of people bricking their phones that way. **** him/her. Anyway, I can't get into download mode anymore, even with a JIG. Anybody got any ideas before I send it for JTAG?
crimsondragon said:
Personally, I think the developer got a kick out of people bricking their phones that way. **** him/her.
Click to expand...
Click to collapse
Talking like that will likely not get you any help here...
Please everyone refrain from posting the rule about searching and reading as this should resolve itself (should the OP actually search and read).
anactoraaron said:
Talking like that will likely not get you any help here...
Please everyone refrain from posting the rule about searching and reading as this should resolve itself (should the OP actually search and read).
Click to expand...
Click to collapse
I've searched through enough threads as it is with a combination of different keywords and all I've found is a bunch of people explaining how to get into download mode or others saying so and so can be fixed as long as you can get into download mode. With the latter, if you can't get into download mode, then what?
Just for the record, I've already tried reflashing it to stock with a .tar file. That failed miserably.
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Kind of an improvement as before it would just hang at boot.img but now at least I can get a confirmation of whether it works or not. Currently the phone is still showing the "Firmware upgrade encountered blah blah" crap. But I tried it anyway as I read that it's supposedly a front.
Can't get into stock recovery either. Top left corner says Odin mode. Odd as the JIG puts it into Factory mode. I've uninstalled/installed the Samsung drivers several times. I've changed the USB cable to a Samsung one that I got like a month ago. I have Kies installed. Can't connect the phone to it either. I've tried flashing with Kies not installed and with it installed and shut down/not shut down. Don't think I missed anything else but if I did I'll add it.
crimsondragon said:
Just for the record, I've already tried reflashing it to stock with a .tar file. That failed miserably.
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Kind of an improvement as before it would just hang at boot.img but now at least I can get a confirmation of whether it works or not. Currently the phone is still showing the "Firmware upgrade encountered blah blah" crap. But I tried it anyway as I read that it's supposedly a front.
Can't get into stock recovery either. Top left corner says Odin mode. Odd as the JIG puts it into Factory mode. I've uninstalled/installed the Samsung drivers several times. I've changed the USB cable to a Samsung one that I got like a month ago. I have Kies installed. Can't connect the phone to it either. I've tried flashing with Kies not installed and with it installed and shut down/not shut down. Don't think I missed anything else but if I did I'll add it.
Click to expand...
Click to collapse
I believe that has been discussed also. Pull the battery, re-enter download mode and flash again. When it doesn't complete properly it won't let you Odin again until the battery is pulled.
Just curious but are you on ICS 4.0.4? If so the Odin root is exclusive to gingerbread... Odin cwm and a flash a rom or just Odin back to stock. Root through ICS is obtained by flashing supersu zip through cwm when on ICS.
I realize you are frustrated, but the devs here are awesome and deserve respect, especially since they just brought 4.3 to us.
Sent from my SGH-T769 using xda app-developers app
anactoraaron said:
I believe that has been discussed also. Pull the battery, re-enter download mode and flash again. When it doesn't complete properly it won't let you Odin again until the battery is pulled.
Just curious but are you on ICS 4.0.4? If so the Odin root is exclusive to gingerbread... Odin cwm and a flash a rom or just Odin back to stock. Root through ICS is obtained by flashing supersu zip through cwm when on ICS.
I realize you are frustrated, but the devs here are awesome and deserve respect, especially since they just brought 4.3 to us.
Sent from my SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
Got it figured out. I was surfing the other subforums and landed on the thread talking about Odin 3.07 and I figured why the hell not. The flash to stock was a success. Then I did the root and CWM Recovery. All is well. 3.07 is much better than 1.85. For the record, I am on GB. Thanks for the help. I apologize for earlier as it was indeed frustrating.
I've been running the latest Darthstalker rom on my T-mobile Galaxy Note 5 (SM-N920T). After midnight New Years.. I powered the phone off and then later powered it on and I get this message Custom Binary Blocked by FRP Lock. I can't mount anything via my WIndows laptop and I can't get into Recovery. Since it's a note 5 I can't even open it to get the serial number or any thing or pull the SIM chip. I've seen some posts telling me to use Kies 3 and some saying using Odin to install stock and reroot. A lot of these posts seem to have been using Darthstalker as a ROM.
Is there any path I can follow that will allow me to get back and up and running without data loss? What's the best steps to take?
Thanks in advance and Happy New Years XDA!
mryanmarkryan said:
I've been running the latest Darthstalker rom on my T-mobile Galaxy Note 5 (SM-N920T). After midnight New Years.. I powered the phone off and then later powered it on and I get this message Custom Binary Blocked by FRP Lock. I can't mount anything via my WIndows laptop and I can't get into Recovery. Since it's a note 5 I can't even open it to get the serial number or any thing or pull the SIM chip. I've seen some posts telling me to use Kies 3 and some saying using Odin to install stock and reroot. A lot of these posts seem to have been using Darthstalker as a ROM.
Is there any path I can follow that will allow me to get back and up and running without data loss? What's the best steps to take?
Thanks in advance and Happy New Years XDA!
Click to expand...
Click to collapse
If you can't even mount it on Windows or get into recovery that's not good.
True Dat!
MrMike2182 said:
If you can't even mount it on Windows or get into recovery that's not good.
Click to expand...
Click to collapse
The other examples I read said the same thing.. at this point I'm going to try to find a stock and odin it and root again and see if I even get my files back.. Unless someone has a better idea?
mryanmarkryan said:
The other examples I read said the same thing.. at this point I'm going to try to find a stock and odin it and root again and see if I even get my files back.. Unless someone has a better idea?
Click to expand...
Click to collapse
I would suggest pushing the root kernel to it anyway just to see if it will go.. I do have an FRPbypass but it's an apk meaning you need to install it and if you cannot mount to push it and then try to do adb shell pm install FRPbypass.apk then there's no point in that either.. Can you even get into download mode? If not the last thing I could suggest is the PIT file to repartition it. Unless someone else has a better idea? I do have the PIT file for odin too.
Also I think you're past the point of losing your data and if you can hold the volume down button and power button at the same time until it shuts off and turns back on again you can select factory reset and that's going to ruin all data..
My god, this happened to me on my first Note 5 I had. I was trying to restore it to stock before selling it and like an asshole I forgot to check for "OEM Unlock" and ran into that exact message. It put the fear of god into me. Like you I didn't have the serial number written down and I couldn't get it from anywhere. T-Mobile tech reps tried to tell me the IMEI number acts as a serial number, cool, that doesn't help me. I gave up on Kies and just played around with Odin after I was FINALLY able to find a stock firmware. I can't believe how difficult that was to get. I managed to flash the stock firmware thru Odin and I got the phone back! Stock as it came out the box.
I can't remember how I was able to get it into download mode but whatever button order I kept trying I finally did because Odin recognized the mofo and I flashed that stock firmware as fast as I could. It rebooted and I saw that beautiful stock welcome screen once more. Try to do this, I didn't need to do anything else.
For this reason I now keep a copy of stock firmware along with screen shot of my phone's status screen showing the serial number and everything else. All that's backed up to one of my external drives. Alone with several nandroid backups of various stages of owning this second Note 5 I have now. I'm running V10 of Darthstalker but I haven't heard of other users running into FRP lock. That would mean something tripped their OEM unlock option but how would that happen without you doing it? Is there something inside the ROM (a bug) that's tripping the option in Developer Options?
Best of luck with this, I know how stressful this can be. As far as getting your data back, yeah that's likely a no go. At this point you should be hopeful of getting a working phone back, let alone recover any personal data. Hope you can sort this.
More Info
MrMike2182 said:
If you can't even mount it on Windows or get into recovery that's not good.
Click to expand...
Click to collapse
I can get it into download mode.. just not into recovery. The only thing I can think I did was I changed my password about 4 days ago to google. I don't have any screen security setup so that is not a factor. Last night we were trying to figure out how to push Gear VR to a tv so everyone could watch and I recall disabling (by mistake) the developer options and then re-enabling it. I also turned on a secondary screen option and later turned it off. SO who knows? I do have a twrp backup on a sim so I'm going to go ahead and try to get stock going and so on.. Keep ya posted..
mryanmarkryan said:
I can get it into download mode.. just not into recovery. The only thing I can think I did was I changed my password about 4 days ago to google. I don't have any screen security setup so that is not a factor. Last night we were trying to figure out how to push Gear VR to a tv so everyone could watch and I recall disabling (by mistake) the developer options and then re-enabling it. I also turned on a secondary screen option and later turned it off. SO who knows? I do have a twrp backup on a sim so I'm going to go ahead and try to get stock going and so on.. Keep ya posted..
Click to expand...
Click to collapse
Yeah if you can get it into download mode and you've got the stock firmware you should be good to go and flash tru Odin. That's key. If I were you I'd be like, "To hell with my personal data! Get me a working phone back!".
Good luck.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mryanmarkryan said:
I can get it into download mode.. just not into recovery. The only thing I can think I did was I changed my password about 4 days ago to google. I don't have any screen security setup so that is not a factor. Last night we were trying to figure out how to push Gear VR to a tv so everyone could watch and I recall disabling (by mistake) the developer options and then re-enabling it. I also turned on a secondary screen option and later turned it off. SO who knows? I do have a twrp backup on a sim so I'm going to go ahead and try to get stock going and so on.. Keep ya posted..
Click to expand...
Click to collapse
Ohh I see what you did now and unfortunately all your data is gone because there's only one way to fix this now and that's to either flash TWRP again and then re-flash the rom you want or use odin to flash stock firmware to at least get your phone going.. The mistake you made was disabling developer options which in turn, turned around and re-disabled oem unlock and turned debugging off.. Never ever turn that off while using a custom rom and kernel!!
MrMike2182 said:
Ohh I see what you did now and unfortunately all your data is gone because there's only one way to fix this now and that's to either flash TWRP again and then re-flash the rom you want or use odin to flash stock firmware to at least get your phone going.. The mistake you made was disabling developer options which in turn, turned around and re-disabled oem unlock and turned debugging off.. Never ever turn that off while using a custom rom and kernel!!
Click to expand...
Click to collapse
Ahhh that makes sense.. never heard of the FRP feature until now though.. oh well.. So far I've tried flashing TWRP (failed) and tried flashing a stock rom.. (failed).. I was using Odin 3.10.6
I'll keep at it..
mryanmarkryan said:
Ahhh that makes sense.. never heard of the FRP feature until now though.. oh well.. So far I've tried flashing TWRP (failed) and tried flashing a stock rom.. (failed).. I was using Odin 3.10.6
I'll keep at it..
Click to expand...
Click to collapse
Try downloading the newest odin version sometimes that can help.. Can you tell me how it's failing? Like what exactly happens when you try to do all the flashing? Did you try the adb commands that I suggested? You only need to install minimal adb and Fastboot on the windows pc and then connect your device and then open a terminal in the same exact folder where adb and Fastboot were installed and then type Fastboot devices or adb devices if it give you a bunch of numbers it means that it can see the device and we can then manually push and install the firmware. The other thing I suggest you try to do is flash the Lollipop 5.1 T-mobile firmware because I think it doesn't have frp on it yet and before flashing it go into the actual firmware you downloaded and delete cm.bin then rezip the firmware again and flash that one without the cm.bin but first try flashing the entire firmware as is with the md5 and all before resorting to deleting cm.bin.. Don't try flashing the Marshmallow 6 rom because that's where they started that frp bullcrap if you ask me. FRP stands for Factory Reset Protection... I understand the need for it and it's importance but Google could have been a lot more open about it and explaining to its customers what it's for and what it does not just do it and let most of us learn the hard way!!
When you try to flash in Odin tell me what file it fails on.
If none of this works this page is your last bet buddy
https://www.sammobile.com/forum/showthread.php?t=31136
I'm working on it now! Give you guys a summary of what happened as I as check off your suggestions..
SO far I have the ADB and Fastboot installed (found the link on XDA). However, when I plug my phone in and issue adb devices or fastboot device it does not show. I did also hook up a note II which is my older phone. It used to be rooted and had ROMs installed but I snafued it up one day and didn't bother with it. It says System software not authorized by Verizon Wireless has been found on your phone.. blah blah.. SO that phone doesn't appear in adb devices either.. I've already updated and re-installed the samsung drivers.. Shouldn't the Note II have shown up? There is no FRP for that old model..
I"ve also got Odin and am currently downloading the 5.1.1 firmware.. the free way lol
Progress!
mryanmarkryan said:
SO far I have the ADB and Fastboot installed (found the link on XDA). However, when I plug my phone in and issue adb devices or fastboot device it does not show. I did also hook up a note II which is my older phone. It used to be rooted and had ROMs installed but I snafued it up one day and didn't bother with it. It says System software not authorized by Verizon Wireless has been found on your phone.. blah blah.. SO that phone doesn't appear in adb devices either.. I've already updated and re-installed the samsung drivers.. Shouldn't the Note II have shown up? There is no FRP for that old model..
I"ve also got Odin and am currently downloading the 5.1.1 firmware.. the free way lol
Click to expand...
Click to collapse
I was able to install the 5.1.1 firmware and it reboots, has tmobile's (or samsung's) recovery and boots to a TMOBILE logo and stops. Thinking it is not rooted anymore and Perhaps I should try to re-root.. I did try to install twrp and it failed.. Twrp 2.8.7.1 alpha.. and also the most recent..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Advice?
I'm afraid I'm thrashing around at this point. I have the firmware for 5.1.1 installed. It boots to a tmobile logo and stops. I can get into the default recovery. I can't flash twrp.. I still can't get my files mounted via USB.. Perhaps I need to do a wipe data / factory reset? Also because I know you are gonna ask, adb still does not list any devices, nor does fastboot..
mryanmarkryan said:
I was able to install the 5.1.1 firmware and it reboots, has tmobile's (or samsung's) recovery and boots to a TMOBILE logo and stops. Thinking it is not rooted anymore and Perhaps I should try to re-root.. I did try to install twrp and it failed.. Twrp 2.8.7.1 alpha.. and also the most recent..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
mryanmarkryan said:
I'm afraid I'm thrashing around at this point. I have the firmware for 5.1.1 installed. It boots to a tmobile logo and stops. I can get into the default recovery. I can't flash twrp.. I still can't get my files mounted via USB.. Perhaps I need to do a wipe data / factory reset? Also because I know you are gonna ask, adb still does not list any devices, nor does fastboot..
Click to expand...
Click to collapse
Your gonna have to flash the LATEST 6.0.1 ROM and firmware thru Odin. I don't think 5.1.1 will boot your phone up completely.
mryanmarkryan said:
I'm afraid I'm thrashing around at this point. I have the firmware for 5.1.1 installed. It boots to a tmobile logo and stops. I can get into the default recovery. I can't flash twrp.. I still can't get my files mounted via USB.. Perhaps I need to do a wipe data / factory reset? Also because I know you are gonna ask, adb still does not list any devices, nor does fastboot..
Click to expand...
Click to collapse
It stopped right while trying to flash the recovery part of it so here's what I suggest you try to do.. unzip the 5.1.1 firmware you downloaded and unzip it again until you can see all the files in it and then manually flash them 1 by 1 in the AP slot but don't allow the phone to auto reboot uncheck that option and after 1 files flashed hold the volume down button and power button until you can select shut down device or turn off whichever then again hold the buttons to get into download mode again and continue until they are all flashed and then finally again hold the volume down button and power button and when it comes back on then select factory reset.
---------- Post added at 08:31 PM ---------- Previous post was at 08:28 PM ----------
E-POUND said:
Your gonna have to flash the LATEST 6.0.1 ROM and firmware thru Odin. I don't think 5.1.1 will boot your phone up completely.
Click to expand...
Click to collapse
If he flashes the latest firmware with the security updates he can never go back to 5.1.1 so I don't suggest he do that yet
Ok, potentially some progress.. I flashed all the .bin files . Then I converted all the img files to tar.md5 and flashed those including the recovery and system.img. I rebooted the phone into download each time. Afterwards I rebooted and it did a system update icon for a bite and then the samsung animation.. Now it's at t-moile.. and sitting. I'll let it sit for a while.. maybe it's just rebuilding the cache.. I didn't see an option for factory reset, but I could go into recovery and do it there?
Update: It finally rebooted and has done so 3 times after sitting at the T Mobile (white screen) ..
Update2: I tried to flash the contents of file twrp-3.0.2-0-nobleltetmo.img.tar.. it failed so I extracted the recovery.img file and converted it back to tar.md5 (I know probably just a circle). It failed too..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does this mean I'm not rooted anymore?
mryanmarkryan said:
Ok, potentially some progress.. I flashed all the .bin files . Then I converted all the img files to tar.md5 and flashed those including the recovery and system.img. I rebooted the phone into download each time. Afterwards I rebooted and it did a system update icon for a bite and then the samsung animation.. Now it's at t-moile.. and sitting. I'll let it sit for a while.. maybe it's just rebuilding the cache.. I didn't see an option for factory reset, but I could go into recovery and do it there?
Update: It finally rebooted and has done so 3 times after sitting at the T Mobile (white screen) ..
Update2: I tried to flash the contents of file twrp-3.0.2-0-nobleltetmo.img.tar.. it failed so I extracted the recovery.img file and converted it back to tar.md5 (I know probably just a circle). It failed too..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does this mean I'm not rooted anymore?
Click to expand...
Click to collapse
You're not rooted at all right now but you should not have needed to turn the imgs back into md5s again you should have just flashed them the way they were they don't need md5 just to flash. Try holding the volume down button and power button until it shuts off and turns back on again then select factory reset if that doesn't work then go into download mode again and connect to a Windows pc and use Smart Switch to try and fix it.
The reason I converted them was because Odin wouldn't find the files.. I tried just running them by typing a *.img but it didn't work. I'll go read about smart switch.. I"m learning stuff here
Update,: On a hunch I went back and ran the firmware install again, but just in it's original format. It succeeded and I'm setting up the phone now.. Thanks for your help MrMike. I appreciate you putting the time in..
mryanmarkryan said:
Ahhh that makes sense.. never heard of the FRP feature until now though.. oh well.. So far I've tried flashing TWRP (failed) and tried flashing a stock rom.. (failed).. I was using Odin 3.10.6
I'll keep at it..
Click to expand...
Click to collapse
You are using the wrong stock firmware. Download the DPG1 firmware since that is was darthstalker v.11 is on. If you backed up your ROM then you don't have any troubles at all. Just ODIN back to stock, root, twrp recovery data only and done. But not all at once. First get the firmware going and reboot your phone. Once you know it's working the try rooting. Once you are rooted download TWRP and recover your data only.
Btw - FRP is when you log into your google account in the beginning of the setup so don't do that if you want to flash other ROMs.
P.S. I'be been running Darthstalker v.11 since it came out with no problems.
Hello, i have recenently tried to root my samsung s8 (did not know it was a stupid idea at that time) after i succeeded i wanted to start installing some roms
So i went and booted TWRP installed the roms, but my phone wouldn't boot anymore.
So i reinstalled the original OS through Odin, and my phone was back and working again , but being the stupid idiot I am, I tried to root it, again only this time without succes.
The phone is stuck on the device info (the samsung text with "Samsung Galaxy S8+" and "powered by android") and wont boot further or into android
When i try to once again reinstall the original OS with Odin it gives me the following error msg:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006>
<ID:0/006> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
I can't boot into recovery mode on my phone either, just download mode nothing else.
i've treid booting recovery mode on my phone from my pc but when i use "adb devices" it won't detect the device (while in download mode) I'm not sure if it should detect it as I am in download mode, it does however detect the device in device manager, maybe USB debugging is disabled as i installed a fresh copy of android, I however only have a year of android experience so I really don't know if adb should even be possible from download mode.
Anyhow after 3 days of internet troubleshooting, I'm really running out of options.
Hope someone can point me in the right direction.
FluitGeluid said:
Hello, i have recenently tried to root my samsung s8 (did not know it was a stupid idea at that time) after i succeeded i wanted to start installing some roms
So i went and booted TWRP installed the roms, but my phone wouldn't boot anymore.
So i reinstalled the original OS through Odin, and my phone was back and working again , but being the stupid idiot I am, I tried to root it, again only this time without succes.
The phone is stuck on the device info (the samsung text with "Samsung Galaxy S8+" and "powered by android") and wont boot further or into android
When i try to once again reinstall the original OS with Odin it gives me the following error msg:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006>
<ID:0/006> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
I can't boot into recovery mode on my phone either, just download mode nothing else.
i've treid booting recovery mode on my phone from my pc but when i use "adb devices" it won't detect the device (while in download mode) I'm not sure if it should detect it as I am in download mode, it does however detect the device in device manager, maybe USB debugging is disabled as i installed a fresh copy of android, I however only have a year of android experience so I really don't know if adb should even be possible from download mode.
Anyhow after 3 days of internet troubleshooting, I'm really running out of options.
Hope someone can point me in the right direction.
Click to expand...
Click to collapse
There is a S8+ forum, you'll likely get more assistance from there.
I'm getting the same problem one by one. please help
Critical Detox said:
There is a S8+ forum, you'll likely get more assistance from there.
Click to expand...
Click to collapse
when device reboots on its own after failed error press bixby vol down and power button. let it boot into download mode again now flash rom or whater ever. it would work on 2nd attempt.
rehanraza said:
when device reboots on its own after failed error press bixby vol down and power button. let it boot into download mode again now flash rom or whater ever. it would work on 2nd attempt.
Click to expand...
Click to collapse
I have tried that also, but keep getting the error above
same problem here. i had stock dbt tw rom. root with magisk. then i wanted to flash new BL and modem from new dbt fw update. after this i only got working DL mode left. couldnt flash back to another fw no matter which source i tried. btu too. i also got the same error as described above. after whole night of odin flashing trys, for myself i thought sth of internal memory chip is broken so i ordered a new phone. but now i see the second thread describing my problems maybe i was wrong with my thoughts
I fixed it!
With the help of Nameless i managed to fix my problem, here is his post regarding this issue: https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
I see other people are experiencing this issue as well, hope this helps!
here is the AQF7 bootloader I used: https://www.androidfilehost.com/?fid=889764386195911671,
For a full flash of the AQF7 version, I recommend you to use this website: http://updato.com/firmware-archive-select-model
Fill in the model of your S8 or S8+ select your country then look for the one that ends with XXU1AQF7 under the tab PDA
Best of luck!
FluitGeluid said:
With the help of Nameless i managed to fix my problem, here is his post regarding this issue: https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
I see other people are experiencing this issue as well, hope this helps!
here is the AQF7 bootloader I used: https://www.androidfilehost.com/?fid=889764386195911671,
For a full flash of the AQF7 version, I recommend you to use this website: http://updato.com/firmware-archive-select-model
Fill in the model of your S8 or S8+ select your country then look for the one that ends with XXU1AQF7 under the tab PDA
Best of luck!
Click to expand...
Click to collapse
Worked like a charm thanks FluitGeluid....
You save me :angel:
So basically I have a FRP locked S7 running nougat (not anymore ). I tried various guides to bypass FRP lock, but none worked. Stumbled upon this guide, and got Custom Binary Blocked by FRP Lock. Searched some more, found out I should downgrade to marshmallow (apparently) to make it work. Started up Odin, and I only loaded only the AP, found a video of a guy doing it and working, but in retrospect I think I should have loaded the bootloader, etc.
Long story short, after I rebooted the phone after flashing, it got stuck at Galaxy S7 logo, and I couldn't turn the phone off for the life of me (held power button for like 10 minutes). Simulated battery pull command just restarted the phone, still stuck. I let the battery drain, thought I could charge the phone while off for a bit, put it back into download mode, and try to reflash back to 7.0 or something. Same story.
Any advice or ideas would be greatly appreciated.
On your second Odin flash attempt did you include all 4 firmware files (CP, CSC, BL, AP)? If not, do it again using all of those, and don't use HOME_CSC
Beanvee7 said:
On your second Odin flash attempt did you include all 4 firmware files (CP, CSC, BL, AP)? If not, do it again using all of those, and don't use HOME_CSC
Click to expand...
Click to collapse
I only flashed once, just with AP ticked. That's when I got stuck in bootloop. Now I can't get the phone into download mode. It's fully discharged now, and if i plug in the charging cable it just starts on S7 logo and freezes again.
Give it some charge, then try get into download mode with USB disconnected. Even when on the Samsung logo, the download mode combo is meant to interrupt and reboot no matter what the phone is doing, but when USB is connected it goes into the charging state.
Beanvee7 said:
Give it some charge, then try get into download mode with USB disconnected. Even when on the Samsung logo, the download mode combo is meant to interrupt and reboot no matter what the phone is doing, but when USB is connected it goes into the charging state.
Click to expand...
Click to collapse
Charged it for a bit, removed cable, stuck on S7 Logo. Proceeded to apply home + vol down + power, phone restarted, back at S7 logo still stuck.
LE: Kept holding download mode combo, managed to get it working. Will update soon
Are you releasing hole + vol down + power when it restarts or holding it the whole time? You should be holding it until you get to the download mode screen.
Beanvee7 said:
Are you releasing hole + vol down + power when it restarts or holding it the whole time? You should be holding it until you get to the download mode screen.
Click to expand...
Click to collapse
As I said up top, managed to get into download mode. Added all files to odin, clicked start, fail on BL.
Phone says SW REV. CHECK FAIL. DEVICEL: 2, BINARY: 1
What version did you start on, Nougat? And you're trying to go back to Marshmallow?
It could be that the last bootloader version that came with Nougat prevents downgrades, but if you flash to Oreo first including the newest bootloader, you should then be able to downgrade from Oreo to Marshmallow.
Beanvee7 said:
What version did you start on, Nougat? And you're trying to go back to Marshmallow?
It could be that the last bootloader version that came with Nougat prevents downgrades, but if you flash to Oreo first including the newest bootloader, you should then be able to downgrade from Oreo to Marshmallow.
Click to expand...
Click to collapse
Yes, it was on Nougat. Will try to flash Oreo. I`m guessing there's no way to bypass FRP on Oreo tho ? Also thanks for all your help so far ! :good:
Yea Oreo is as secure if not more secure than Nougat, the only FRP bypass methods I'm aware of only work on Marshmallow.
Beanvee7 said:
Yea Oreo is as secure if not more secure than Nougat, the only FRP bypass methods I'm aware of only work on Marshmallow.
Click to expand...
Click to collapse
Right so now I downloaded the Oreo update. Put everything in Odin, press start, it just restarts the phone and says success. Should I flash bootloader first and then the rest of the files ?
Part of log:
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Flashing all at the same time should work fine, what happens if you try marshmallow now?
Beanvee7 said:
Flashing all at the same time should work fine, what happens if you try marshmallow now?
Click to expand...
Click to collapse
Fails right off the bat. Same SW REV error
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Then yea try just the Oreo BL, see what happens, then the marshmallow files.
You've definitely got the right firmware for the phone model that is displayed in download mode?
Beanvee7 said:
Then yea try just the Oreo BL, see what happens, then the marshmallow files.
You've definitely got the right firmware for the phone model that is displayed in download mode?
Click to expand...
Click to collapse
Pretty sure yeah, here's the list:
Oreo:
Country / RegionNordic countries
PDAG930FXXU2ERE8
Product CodeNEE
CSCG930FNEE2ERE8
PhoneG930FXXU2ERD6
Nougat:
G930FXXS1APG3 - Poland Version i think
Marshmallow:
G930FXXU1DQB7 - Bulgaria Version
Also odin stuck at
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin.lz4
Click to expand...
Click to collapse
And you've definitely got a G930F international model and not US/Canada?
You can use Odin to repartition when there's boot issues, but it's risky and I'm not personally familiar with the correct way to do it.
Beanvee7 said:
And you've definitely got a G930F international model and not US/Canada?
You can use Odin to repartition when there's boot issues, but it's risky and I'm not personally familiar with the correct way to do it.
Click to expand...
Click to collapse
Pretty sure yeah. Phone is from the UK. In download mode it says SM-G930F, and when I could get into recovery up top it said G930FXXsomething something
LE: Trying to flash nougat back, see if I can at least get it back working the way it was.
LE2: Same SW REV CHECK FAIL with nougat as well :|
LE3: Managed to flash nougat back just by writing the AP, phone now started normally. That just leaves the problem with the FRP lock, so I`m back to square one )
Why does Samsung disallow downgrading? Why can't we just tick a box that says "I understand that the security will be downgraded too" so their butts are covered and we can have what we want? What a dumb move on their parts... Obviously not gonna blame Samsung if someone got my info because I choose to downgrade...
Btw been trying to do the same. I rooted first and made a backup before messing with things. Only tried the 2 things, got in a boot loop but was able to reflash twrp, then booted into twrp by pressing the download buttons combo, but switching to recovery combo as soon as the screen went black. That worked. For now restored my backup.
But I'm determined to figure this out one way or another. SO many people want to downgrade, so why isn't Samsung listening? "Everyone hates nougat, but hey let's make Oreo exactly the same..."
Ugh sorry just frustrated right along with you!
Sent from my [device_name] using XDA-Developers Legacy app
You cant downgrade U2 to U1, efuses prevent this! Try to FRP unlock your phone though G930FXXU2DRAG firmware of UAE, its the only one that worked with z3x and octoplus boxes for me.