Database Info

How to root A110 using SP flash tools

Today I am sharing how to root MMX A110 using sp flash tools
First you need some things download below
1) CWM recovery
http://d-h.st/Ky2
Thnxx @suhas.holls
2) MMX A110 Drivers
http://www.mediafire.com/?5ai8nwihmp30grw
3) VCOM drivers
http://www.mediafire.com/?3wec990b42j3nn7
4) SP flash tools
http://www.mediafire.com/?b111ivr9it76cma
5) Supersu.zip
http://www.mediafire.com/?i1y443she8hlby6
6) MT6577 scatter file
http://www.mediafire.com/?2cp7i70khi8fe84
Now after downloading all things
1)Install The drivers in your PC or lappy whatever, window xp or 7 should be used.
2)Now first copy supersu.zip into root(out of every folder)of your phone's SD card
3) Now in developers option tick USB Debugging
4) Switch off the phone remove then replace battery and connect it to PC now your PC will install MTK preloaders.
5) Now remove data cable and don't turn on the phone, if its turned on itself then turn it off
6) Now open sp flash tools folder and open spflashtools.exe , search for the option "Scatter-Loading" and click on it and locate the scatter file you downloaded.
7) A list will appear then untick all except"Recovery"
8) Click on recovery and locate the cwm recovery you downloaded.
9) After selecting recovery insert data cable in PC and not in phone only connect one side i.e. to the PC.
10)Now click on download button and a countdown will start in the lower progress bar then connect your phone (in switched off state) Then a yellow bar and a green bar will appear and after that a green ring will appear saying "Download OK".
Your phone's recovery is now cwm.
11) Now remove phone and press Volume up volume down power key simultaneously and a mode will appear with two option recovery mode and factory mode.
12) Using volume up choose recovery mode and press power key.
13) then choose again recovery mode and press volume down key.
14) Now choose Install a zip from SD card and select"supersu.zip"And after installing it reboot your phone.
After rebooting you will find an app named Supersu
Hurray Your phone is rooted and now it has endless things to do.
Remember- Rooting void your phone's warranty
If you liked my work, please Hit thanks button it will motivate me and won't cost you.

Important
avinash130413 said:
Today I am sharing how to root MMX A110 using so flash
I am not responsible if anything happens to your phone, do at your own risk..
Click to expand...
Click to collapse

Yuphoria rooting guide new method

Recently i have purchased new yuphoria device which comes with latest YNH1TBS2P2 update. When i tried to root it with methods available on this site , it fails. So i have to discover new method for it. Today i have discovered the new method and I am posting it here. For that download the rooting kit from below and also install pdanet driver from its official site.
Yuphoria new rooting kit
First of all you have to enable developer option in option menu. To do that go to option menu then goto about , search built number and tap it till the message popup that said enabled the developer option. Then go to developer option and start the advance reboot option.
Now plug in the Yuphoria device and copy the TWRP folder from downloaded zip file to in root of phone memory and memory card. Then copy supersu.zip in root of phone memory. Now press and hold power button and select rebbot then bootloader then ok.
Now your mobile boots in fastboot mode. Now run the run.bat file in adb_fastboot folder. After that a command prompt is popup and closed automatically and you hear the sound of device removal in your PC , instantly disconnect the data cable from your phone and wait for a minute. Twrp recovery starts and then select install zip option and select the supersu.zip file from your phone. slide the button at bottom and restart phone. Now your phone is rooted.
Note: you have to unlock bootloader for this method.
edit I have found yu team have made system read-only so general peoples are found difficulties to flash custom recovery and to root.

dharmang1910 said:
Recently i have purchased new yuphoria device which comes with latest YNH1TBS2P2 update. When i tried to root it with methods available on this site , it fails. So i have to discover new method for it. Today i have discovered the new method and I am posting it here. For that download the rooting kit from below and also install pdanet driver from its official site.
Yuphoria new rooting kit
First of all you have to enable developer option in option menu. To do that go to option menu then goto about , search built number and tap it till the message popup that said enabled the developer option. Then go to developer option and start the advance reboot option.
Now plug in the Yuphoria device and copy the TWRP folder from downloaded zip file to in root of phone memory and memory card. Then copy supersu.zip in root of phone memory. Now press and hold power button and select rebbot then bootloader then ok.
Now your mobile boots in fastboot mode. Now run the run.bat file in adb_fastboot folder. After that a command prompt is popup and closed automatically and you hear the sound of device removal in your PC , instantly disconnect the data cable from your phone and wait for a minute. Twrp recovery starts and then select install zip option and select the supersu.zip file from your phone. slide the button at bottom and restart phone. Now your phone is rooted.
Click to expand...
Click to collapse
any one tried it,is it working? is it going to wipe internal memory?

For this method you have to unlock bootloader and unlocking boot loader will erase your internal memory

Samsung SM-J105F root

can somebody with a recovery that I can mode to run on my phone help? I am tired of using 360root.apk I want to use SuperSU and not these apps with Chinese interface

Here are the steps I followed after some extensive reading of other peoples methods and trying every possible app that would not work:
How to install TWRP and root the Samsung Galaxy J1 Mini (SM-J105F)
The device is powered by a Spreadtrum chipsets and Android 5.1.1
Basically what you need to do to root your Samsung, is to install/flash a custom recovery such as TWRP, which other than the limited functions of the OEM recovery, has all the features you need to flash a custom rom. You then boot into this TWRP recovery and use the touch menu to install/flash the SuperSu xx.zip file to give you root. It seems that other methods to root do not work on this specific phone.
Here is an Odin3 flashable *.tar md5 TWRP file that will also make it possible to root your Samsung Galaxy J1 SM-J105F, unfortunately it has to be paid for. Find it here: http://www.saroms.co.za/product/samsung-galaxy-j1-mini-j105f-root-file/ - and follow the bellow steps to flash the TWRP custom recovery and after rooting your J105F Samsung Galaxy J1 Mini.
Note: Odin3 only flashes with xxxx.tar or xxxx.tar.md5 files. TWRP can also flash xxxx.zip files.
To get into Odin mode or Download mode on the phone, switch off phone and unplug any cable to your PC or charger. Now hold in the Home button, the lower part of the volume button (V-) and the power button simultaneously. The phone will boot into a recovery screen and if you push the top part of the volume button (V+) you will switch to the Download screen. Only now can you plug your phone into the PC and run Odin3
Once TWRP recovery has been loaded, do the following to boot into TWRP recovery: Disconnect any cables to charger or PC. Switch off the phone. Now hold in the Home button, the upper part of the volume button (V+) and the power button simultaneously. The phone will boot showing the Teamwin screen and then the menu buttons which work from the touchscreen.
If you do not want to pay for the correct TWRP recovery for your specific device, then use Google to search for the file: TWRP SM-J105H_F_M_Y 5.1.1.tar
1. Download the following files:
(i) OEM Samsung firmware for your phone in case you have to fall back and reinstall the firmware i.e.
XFV-J105FXXU0AQA3-20170329071250.zip
(ii) TWRP SM-J105H_F_M_Y 5.1.1.tar or any other custom TWRP recovery file for your model phone.
(iii) UPDATE-SuperSU-v2.79-20161211114519.zip
2. Go to Settings > About device > Software Info > and tap on Build number a few times until you are a developer.
3. You should now see and tap on 'Developer options' if you go back to Settings.
4. In Developer options. turn on 'OEM Unlock' by moving the slider to the right, Enable. Never set that setting to off once you have loaded a custom firmware or TWRP custom recovery! You phone will brick and only show *“Custom binary blocked by FRP lock” after the next reboot!! (FRP = Factory Reset Protection)
* If so install OEM firmware with Odin3 and start again.
5. Copy the UPDATE-SuperSU-v2.79-20161211114519.zip file to the root of your internal storage SD card (not external). This will be installed by using TWRP recovery. Use your PC to do this.
6. Turn the device off and boot into "Download Mode” (V- and Home and Power ... and then V+)
7. Run the Odin3 application on your PC and load the recovery *.md5 file under 'AP' or load the file: TWRP SM-J105H_F_M_Y 5.1.1.tar.
8. Connect the MS-J105f to your PC and let Odin3 connect and ID:COM will go blue and show i.e. 0 : (COM4) > then click Start.
9. The SM-J105F will power on when done. Disconnect cable and power it off again.
10. Boot into recovery (V+ and Home and Power) will now boot into TWRP.
11. You will now see the TWRP menu touch screen.
12. Tap Install > scroll to the "UPDATE-SuperSU-v2.79-20161211114519.zip" file you downloaded and copied to the phone memory tap it.
13. Swipe at the bottom slider to confirm install.
14. Tap Reboot to system when done and you should be rooted.
15. Install and run SuperSU from the app store and run.
16. Install and run Root Checker Basic.
To reinstall the OEM firmware, download the proper xxxx.zip from the Samsung website.
You must the extract the xxx.tar.MD5 file from the download
If you can get into the Download screen on your SM-J105F then use Odin3 as above, just under PA select the OEM file xxxx.tar.MD5 (it takes a short while to select properly as it a very large 2 gb file after extracting)
Hope this helps someone else. Thanks to all whose posts and contributions helped me.

Easy and Detailed Steps for Rooting Sony Xperia Z3 (D6653)

Here i will Explain you how to Root Sony Xperia Z3 D6653
PRE-REQUISITES AND REQUIREMENTS
1. BACKUP YOUR ANDROID DATA
Backup your Data through built in app Backup & Restore or by any other Tools available in Playstore like
a.
HTML:
https://play.google.com/store/apps/details?id=com.idea.backup.smscontacts&hl=en
(Super Backup)
b.
HTML:
https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=en
( Titanium Backup)
2.INSTALL SONY XPERIA Z3 DRIVERS
You need these drivers to connect your device with the computer to follow this guide. Without these USB drivers you can’t connect your device to the PC, first download and install these drivers on your system.
HTML:
http://www.tothemobile.com/download-android-usb-drivers
3. ENABLE USB DEBUGGING MODE
You need to enable USB debugging mode. Without enabling USB debugging mode on your device you can’t start the root or Unlock process.
a. Go to your Phone Settings > About option.
b. From here you can see the Build number of your device. From here Tap “Build number” seven (7) times continuously and after that your Developer options
under Settings are back.
c. Go back to setting and now you can see the new “Developer Option” here. Tap on Developer Option and check USB debugging > ok
Then
a. GO to the Phone the Settings.
b. Tap on “Developer options”.
c. Check the option: “USB debugging”.
d. Check the allow mock location or select mock location app
e. check install from unknown sources
4. Battery
If your device switched off during this process, it could damage or brick the device. Make sure that your Android battery is full charge or near about 55-70% battery level.
BEFORE GOING TO ROOT YOUR MOBILE YOU HAVE TO UNLOCK THE BOOT LOADER
5. UNLOCKING BOOTLOADER
a. Download the Fastboot Drivers from below link
HTML:
http://d-h.st/ibd
( Copy Paste in browser and download )
b. Get the IMEI code for your device: By typing *#06# in phone dialer to find it out, note only the digits or you can get it from About Phone -> Status -> IMEI
c. In your device, open the dialler and enter *#*#7378423#*#* to access the service menu.
Tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No,
or if the status is missing, your device cannot be unlocked. then you have to backup your TA Partion and continue.
d.
HTML:
http://www.flashtool.net/downloads.php
Download this tool and install .......
1. Install Flashboot and Fastboot drivers of Flashtool (setup file will be on C:\Flashtool\drivers or similar place).
2. Turn on your phone, and connect with usb debugging on.
3. Go to Plugins-> Bootloader Unlock option, start it.
4. Now it will ask to disconnect your phone and reboot in FLASHMODE. ( By Pressing Volume Up and connect the usb cable)
5. it reboot your phone in FASTBOOT mode.
6. It will show a window with your IMEI number in system, insert your unlock key and click "unlock".
To get Your Unlock Code
a. Visit the
HTML:
http://unlockbootloader.sonymobile.com/unlock/step1
and read everything! Now Click on “Yes, I’m sure” button.
b. Now form the next page clock on the “I accept” button to confirm that you accept the legal terms mentioned on the page.
c. On the next page you will see a form in which you have to mention the details like Your Name, Your device IMEI code and the email address.
d. Fill the form and give correct email id .... because it will send you the link for getting the unlock code.
e. Create unlock boot loader key request
f. You should now receive your unique unlock key via Email. Save this key safely, you need this file in next steps.
g. Enter that key in windows which the Window showed in 6 th point in system from flash tool.
Hit enter once you’ve put your unique bootloader unlock key in place.
You’re device should now be bootloader unlocked.
INSTALL TWRP ON SONY XPERIA Z3 (D6653)
1. Once the bootloader is unlocked. Download the recovery file here and save it on your desktop
HTML:
http://d-h.st/5EA
2. Download the Fastboot file for your phone here and extract the folder on your desktop.
HTML:
http://www.mediafire.com/file/yfms6s1j85cae8t/adb-and-fastboot-files.zip
3. Now copy/paste the bootZ3monxtest01.img file to the Fastboot adb folder. (Dont Rename the Recovery)
4. Now press Shift key + Right click on any empty white space inside the folder, and select “Open command window here”. Now you will see the command prompt
window on your desktop.
5. After this Boot your Xperia Z3 into Fastboot Mode. To do this Press and hold the Volume Up button, Connect to your PC using a USB Cable while holding down the Volume Up button on your Xperia Z3.
6. Once your device is in fasboot mode. Enter the following command on command prompt window
fastboot Devices
7. If the command prompt window shows some digits and alphabets, then your device has successfully connected to Fastboot. If now then install the Android USB drivers again and restart the process
8. Now type the following command:
fastboot flash boot bootZ3monxtest01.img
9. Now the flashing process will start on your phone, wait for some time it will take little/some time.
10. Once done, issue the following command to reboot your phone
fastboot reboot
THAT's IT you have installed the TWRP Recovery in your Mobile.
ROOTING XPERIA Z3 (D6653)
1. To get started you have to install the TWRP recovery on your Z3. Check out the instructions here.
2. Download the SuperSu Zip here.
HTML:
https://download.chainfire.eu/1013/SuperSU/SR4-SuperSU-v2.78-SR4-20161115184928.zip
3. Now copy the Zip file on your phone SD card.
4. Boot your Z3 in recovery mode. To do this Switch off your Xperia Z3 first, Switch it back on and the time when you see your phone’s LED notification light turn
Pink! (or any other color) — start pressing either the Volume UP or Volume Down key a couple of times to make your phone boot into recovery mode.
5. Once your phone in recovery mode, Tap on Install » browse to the location where you saved the supersu zip files and tap on it.
6. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
7. This will start the flashing process on your phone and take some time to finish.
8. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.
That’s ALL!. Now your Sony Xperia Z3 is rooted. Now you can Install any Custom ROM to your Model.
Please Press Thanks if You like this Post and Found Usefull. :good:

I don't understand why on this device you need to flash boot instead of recovery....and by the way this method gave me bootloop
Sent from my 6055P using XDA-Developers mobile app

Why would you unlock the bootloader when you have the option to get root and recovery without doing it. Of course this is if you wanna try stock modded roms but for custom you have to.

I have used this rooting method but when i switch my device and open recovery mode. My mobile get hanged and not get recovery mode. Any other alternative methods

can someone send me another link for twrp of that sony xperia z3 d6653?? i can't download from that site

[CWM/Philz Touch 6 Recovery] for Cherry Mobile Flare S7 [MT6739, MT6739WA]

*C.M FLARE S7 CMW/PHILZ TOUCH CUSTOM RECOVERY*
[Tutorial]
Root not necessary*
No need to: ro.secure = 0 /off
REQUIREMENTS LISTED BELOW:
*Enable Developer Options [Turn On*]
*OEM Unlock [Optional*]
*Enable USB Debugging [Turn On*]
*Download C.M Flare S7 Recovery [Complete Set*]: https://drive.google.com/open?id=1SzTbVQ_dIiWdqj7cuB_17b9P5J1la4-C
------------------
Option 1: [Through SP FLASH]
Step1: Open SP FLASH Flash_tool.exe make sure to run as Administration.
Step2: On Scatter loading file, Choose MT6739_Android Scatter.txt file.
Step3: Select Download Only.
Step4: Uncheck all and Check the recovery only
Step5: Locate and Choose custom recovery.img file
Step6: After selecting the recovery.img file, press the DOWNLOAD button
Step7: Power off your phone and then remove the battery
Step8: Connect the phone USB cable and wait for 30 seconds
Step9: if the flashing has been successful, disconnect the cable then Press VOLUME UP + POWER Button.
Option 2: [Through ADB]
Step1: You should Enable USB Debugging mode before using adb
(Located in "Settings", "System", and tap 'About Phone' 7 times)
Go back to System Settings
Turn on: DEVELOPER OPTIONS.
Turn on: OEM UNLOCK & USB DEBUGGING.
Step 2: On your Computer, install "ADB-Setup-1.4.3" then after this software has been installed
Before you can use ADB you should Unlock the BOOTLOADER before flashing (this will wipe or reset the phone)
*make sure that the "OEM UNLOCK" is turned on*
On you computer open 'CMD' command.
-----------------------
Unlocking the OEM BOOTLOADER to enable the Flash feature on Fastboot*
you can use VOLUME UP + POWER BUTTON to go to Fastboot by selecting BootLoader Or ADB.
Option 1: using adb
Type:
adb devices
(Phone id will pop up in cmd with the list of 'DEVICES' attached)
adb reboot bootloader
(*in Fastboot type*)
fastboot oem unlock
(*Message will pop-up on your phone then Press VOLUME UP*)
(*To enable Flashing Custom Recovery Type command *)
fastboot flashing unlock_critical
(*Again Press VOLUME UP to enable*)
fastboot flashing get_unlock_ability
(*Queries bootloader to see if the device is unlocked*)
-----------------------
after unlocking the fastboot and oem bootloader
you can now Flash the Custom Recovery [CWM/Philz Touch 6]
in C.M FLARE S7 Folder Locate the CWM-Philz Touch 6 Custom Recovery
and copy the recovery.img file then
Type:
fastboot flash recovery recovery.img
(after flashing succeeded*)
Type:
fastboot reboot
(it will automatically reboot your phone)
-------------------------
*[End of tutorial]*

Tutorial
I flash it via flashify and ends with successful.
But i have notice that the recovery not working on touch button, anyway thanks for making this recovery.

How to fix?
Sir please tell me on How to fix Can't mount data on this custom recovery. I try to full backup using this recovery but its ended can't mount data. Sorry for my bad english I hope you can help me sir.