Bricked? - Shield Tablet Q&A, Help & Troubleshooting

I got my new K1 tablet, I Unlocked bootloader (didn't reboot after unlock) and flashed twrp 2.8.7.3. I am not able to boot into OS, It opens up twrp for some recovery script that keeps showing cannot mount partitions and fails and repeats.
Please advice
edit- FIXED IT Flashed stock recovery and it took care of things.

Bet that was a worrying time for you ?, glad to hear its sorted ?

Related

IT WAS THE FINAL STEP... and it did not work. (Stuck on boot loader warning screen)

FINAL EDIT: FIXED!!! Sparsechunk files 1,2and 3 have to match the exact name with the firmware folder sparsechunk files.
I did not notice that my firmware sparsechunk files ended in .0 .1 .2 and not 1 2 3 like the tutorial had listed, so I was fastbooting the wrong sparsechunk command. That was the final fix that finally worked for me.
Original post:
SHORT VERSION:
My god this has been one crazy root journey.
I have done absolutely EVERYTHING I could pull up on google to fix my phone, and what seemed to be the final piece to the puzzle, still has not fixed anything.
My phone is bricked, and i would really appreciate help at this point.
The current problem:
When I turn on my phone, it vibrates, and displays the WARNING BOOT LOADER UNLOCKED screen, and stays there forever.
I can access my boot loader, and recovery, but I dont know what to do at this point.
I tried a quick flash stock recovery kit kat with moto tool AIO, and it didnt help.
Any ideas?
LONG VERSION (backround info may help to understand the current issue)
Now, if you want to know what began all of this, continue reading, otherwise the above is my current issue.
After successfully unlocking and rooting my phone
I downloaded SWITCHME, an app that lets you create multible users on the phone. the instructions say that you can use a sub account to test and mess around with anything because you can simply go back to the admin account that has everything untouched.
That was a lie.
1.I deleted .setup, along with a few other things THAT WHERE NOT FLAGGED AS IMPORTANT, assuming the phone would still work. and my phone went bonkers, displaying this infinite message: UNFORTUNATELY, SETUP HAS STOPPED. It was impossible to use the phone, and I could only access bootloader.
2.After endless googling, driver downloading, xda mod installing, I managed to set up my boot loader to do the guide restore stock firmware:http://forum.xda-developers.com/showthread.php?t=2542219
Sadly, I flashed the wrong model number package, I was flashing x35, when I later discovered that my phone is x45.
Flashing the x35 firmware bricked my phone further, to where it would "fail to boot up" and would only display bootloader over and over after attempting to turn the phone on.
3. Simple, I realized I flashed the wrong thing, so I downloaded the x45 firmware from the firmware teem on this website, flashed all of the commands, and bam, the phone starts up with the boot loader warning, and DOES NOT get stuck in the previous boot loader issue I had.
But now the phone wont get past that warning screen so... now im pissed.
Please, if anyone can help me I would greatly appreciate it, Im so close to getting my phone back...
EDIT 2: Looks like the phone wont stay shut down, I realized that if I dont open up boot loader, it will turn itself on and display the warning message.
EDIT:
The stuffs I have, ready to try anything:
CWM touch mod
Moto Tool AIO
Minimal ADB and Fast boot
RETUS x1045 factory firmware
All directories, folders, cmd commands are set up and working properly between all of the programs.
The phone appears to be responding to all cmd commands properly.
I also have the windows one touch super boot root method. (he superboot-windows.bat )
Im afraid to try anything major after freshly flashing the x45 firmware that seemed to bring me one step closer without the help of someone else.
I restored stock to my phone using this link yesturday http://www.ibtimes.co.uk/how-restore-motorola-moto-g-stock-firmware-1447290
it may work for you
I have almost the same problem as if the fastboot not install anything despite not display errors
great that you got it done.
maybe my few cents about my "bricking" story. (xt1032 moto g)
yesterday i wanted to change the rom from cm11 nightly to another custom rom like ehndroix/carbonrom...
first i thought that will be done in a few mins, after having already flashed a custom rom.
then the story began, getting adb work, but, 2weeks ago everything was setup and went fine. dunno why my laptop lost the "drivers".
thats the link which solved that problem: tinyurl . com / kgffjh4 [sorry cant post links outside of xda yet, spam protection]
so after a few hours of getting that fixed i, i began flashing.
suddently i got stuck in bootscreen (ehndroix logo for example)...
then i wanted to go back with my previous backup made internaly of clockworkmod. though i couldnt restore my backup because there was an error message while restoring /data of my backup
also when restoring to factory/wipe in cwm there was that error message about clouldnt "touch" /data, i dont remember the message exactly.
after thinking i bricked everything, i though lets wipe my internal sdcard, maybe that causes the /data error.
then i restarted the device and went for a shower... after 15min i came back and my device was "started".
now i dont know that exactly helped, maybe wiping all data on my phone, or just letting my device boot for a "long" time...
so, thats my yesterdays brick story.
do a factory reset if the bootloader has that option.. otherwise install or run/boot a custom revovery, then either
try the factory reset option there and reboot or..
wipe everything and install a rom
Ok try this, I'm was a victim too:
Relock and unlock bootloader
Download and flash latest Philz
From there format everything...EVERY PARTITION...switch F2FS
After switching wipe every partition again
Select and execute the other 3 wiping option ie., Clean to install new ROM and the other 2 (I can't remember now)
Do this all over again via TWRP too
Now, this is important, don't use the mfastboot for restoring stock...use the one provided by Google for its Android SDK
Flash the stock images
Flash the Moto Razr boot animation and not the one for Moto G to remove the warning sign
I'm 99.99% sure your phone will boot properly
After the phone boots, reflash the Moto G bootanimation
Good Luck!
ngr.hd said:
Ok try this, I'm was a victim too:
Relock and unlock bootloader
Download and flash latest Philz
From there format everything...EVERY PARTITION...switch F2FS
After switching wipe every partition again
Select and execute the other 3 wiping option ie., Clean to install new ROM and the other 2 (I can't remember now)
Do this all over again via TWRP too
Now, this is important, don't use the mfastboot for restoring stock...use the one provided by Google for its Android SDK
Flash the stock images
Flash the Moto Razr boot animation and not the one for Moto G to remove the warning sign
I'm 99.99% sure your phone will boot properly
After the phone boots, reflash the Moto G bootanimation
Good Luck!
Click to expand...
Click to collapse
I try to flash any recovery but after entering I get an android and says no commands, and installation does not throw errors
angelgzg said:
I try to flash any recovery but after entering I get an android and says no commands, and installation does not throw errors
Click to expand...
Click to collapse
You're still in stock recovery.
Use fastboot flash recovery xyz.zip to flash philz recovery
Use this when you're in bootloader mode.
ngr.hd said:
You're still in stock recovery.
Use fastboot flash recovery xyz.zip to flash philz recovery
Use this when you're in bootloader mode.
Click to expand...
Click to collapse
I flash the recovery but rebooted into recovery, the android keeps popping up (no commands)
FINAL EDIT: FIXED!!! Sparsechunk files 1,2and 3 have to match the exact name with the firmware folder sparsechunk files.
I did not notice that my firmware sparsechunk files ended in .0 .1 .2 and not 1 2 3 like the tutorial had listed, so I was fastbooting the wrong sparsechunk command. That was the final fix that finally worked for me.
Sorry I'm traveling a d couldnt update thread fast enough.

another BRICK in the wall

Hi, I got shield tablet, first version, previous owner brick the device, it stuck on AICP logo and not booting. I can enter in fastboot mode, device is unlocked, but it display bootloader version UNDEF_BUIDL, when I try go to recovery mode I got nvidia logo and black screen. I also try install the stock recovery, do all steps in official instructions, no errors and no changes, It's still bricked on custom rom logo. Any chances to fix it? I'don't know what to do now
flamner said:
Hi, I got shield tablet, first version, previous owner brick the device, it stuck on AICP logo and not booting. I can enter in fastboot mode, device is unlocked, but it display bootloader version UNDEF_BUIDL, when I try go to recovery mode I got nvidia logo and black screen. I also try install the stock recovery, do all steps in official instructions, no errors and no changes, It's still bricked on custom rom logo. Any chances to fix it? I'don't know what to do now
Click to expand...
Click to collapse
You flashed manually via fastboot every file? Even the bootloader?
if you mean "fastboot flash boot boot.img", then yes
Now i can enter in recovery mode, and run TWRP, but i takes veeeery long time to boot :/ In TWRP wipe data failed, there are errors in data and cache partition, I can't format it or repait, It shows that partitions are presents, but they have 0MB size
Perhaps try flashing new firmware? It should be somewhere on Steel01's thread (5.0 bootloader, or nougat bootloader or something like that) for lineageos 14.1, it is a requirement to run los on this device and it fixes some bootloader stuff. Though, you may want to get a second opinion on this one because I am no developer whatsoever.
fpozar said:
Perhaps try flashing new firmware? It should be somewhere on Steel01's thread (5.0 bootloader, or nougat bootloader or something like that) for lineageos 14.1, it is a requirement to run los on this device and it fixes some bootloader stuff. Though, you may want to get a second opinion on this one because I am no developer whatsoever.
Click to expand...
Click to collapse
I can't flash rom in TWRP, when I try I get status failed :/ I don't know what to d next :/
Problem is in mounting cache and data partition in internal memory. I think l tried all ways to do that, last one was in adb shell, mount /system ok, mount /data and mount /cache not ok
my conclusions:
I can't flash anything on this tablet, even recovery, I figure it out because I try to flash TWRP version 3.2.1 it works only when i run boot TWRP in fastboot on computer, when I do it in device(run in fastboot mode, select recovery) i got after several minutes TWRP version 2... So, it means that internal memory is broken?
Mine does that too flamner, not sure what to do. I will try a bootloader flash perhaps

Please help! My phone doesn't want to boot into the system.

After I unlocked my bootloader of my Xiaomi Mi A1, I wanted to boot into TWRP by using this command: fastboot boot twrp.img but it wouldn't do anything so then I typed 'fastboot reboot' and it started to reboot and went onto the screen with the MI logo but then the screen went blank, the phone vibrated and it started rebooting again. I left it for a while and when I returned, it was still rebooting constantly. I do not know what is happening but I tried to lock the bootloader and then boot into recovery but that didn't work. I managed to somehow get into TWRP (not knowing how) twice and the first time I just rebooted and the second time, I factory reset my device. From that point onwards I couldn't get into TWRP because I was trying to flash Ressurection Remix rom if I could get into the recovery. My phone is not yet rooted.
Good/Bad news
I installed a different version of TWRP and was able to boot to TWRP successfully so I installed Lineage OS 15.1 and it said that it can't mount '/system' or '/storage' as it doesn't exist after that, I booted and it went into some kind of Lineage OS recovery and I
didn't know what to do with it as applying an update from SD card didn't work so then I installed the pixel experience ROM which also put me into a recovery and the apply update from SD card didn't work as it says 'couldn't mount /sdcard Installation aborted.
Instaling an update from ADB doesn't work either as it tells me to sideload the zip file which I did and nothing happened. Whenever I choose reboot system now, it just reboots back to the recovery.
My phone is not yet rooted but if that would help in any way, I could root in TWRP.
Please help, I don't know what to do.

XZP Wont Boot after Flashing Standard Rom

Hi All,
I've been trying to install TWRP, Root etc on my XZP since yesterday. I've done something wrong at some point, and now my phone will not boot at all.
I had no troubles unlocking bootloader, installing TWRP etc initially. I then tried to install a custom rom from these forums and that's where things spiraled downwards for me.
As part of that procedure, I needed to flash the latest sony firmware first. That went fine.
However, now TWRP is not able to decrypt storage, so I'm not able to flash anything else. Perhaps this is because I booted into the new sony firmware and forgot change the pattern/fingerprint to pin/fingerprint.
So I'm not able to unlock the storage via TWRP by entering a password.
I tried to reflash the same firmware again using newflasher. But the phone won't boot at all. It turns off immediately after the Unlocked bootloader warning. It's not going into a boot loop. Just turns off.
I then tried to flash the TWRP recovery image using adb fastboot command, and the flash seemed to execute properly, but I still can not boot into recovery.
Is it possible the main storage is still encrypted, so nothing can flash to it? Bricked? If so, how do I proceed?
I read something about reformatting partitions? But I'm not able to get into TWRP recovery menu to do this.
*EDIT: I reflashed trwp recovery image, and am not able to boot into recovery. I still can not unlock (unencrypt) the main storage though.
*2nd EDIT: I followed the instructions here:https://forum.xda-developers.com/android/general/how-to-fix-unable-to-mount-data-t3830897
I was then able to flash the stock ROM back onto my device, and I'm able to boot my phone up. I'll look at installing a custom ROM at a later date.
Thread closed at OP request

OOS11 Broke TWRP and bricked my devices

My Phone was running Android 11 perfectly fine. Has been for about a week and a half, and I've decided that I don't like the OS. I was going to flash a custom ROM and went to create a nandroid before flashing. Literally all I did was boot into recovery and TWRP got stuck in a bootloop, the TWRP splash screen appears, crashes and then reappears about 2 seconds later, now when I try to boot back into system, TWRP appears instead and continues to bootloop. I can enter fastboot mode but that's all.
So far I've tried
Booting TWRP through fastboot. Failed another bootloop.
Rebooting through ADB. Boots into TWRP.
Rebooting Bootloader. Seems to do nothing.
Does anyone have any ideas on how to fix this ? It seems strange to me that something as simple as booting recovery could do this much harm. I also have a nandroid backup stored on the device from about a month ago, so the data loss wouldn't be THAT major, but I'm also not sure how I could access it without system or recovery access.
Hi , Which version of TWRP use? I think there is an update a new version TWRP 3.5.2 , Try to flash it. if its still not booting try to boot the original Boot of OOS11.
May be this threads will help you.
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
forums.oneplus.com
humood96 said:
Hi , Which version of TWRP use? I think there is an update a new version TWRP 3.5.2 , Try to flash it. if its still not booting try to boot the original Boot of OOS11.
May be this threads will help you.
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
forums.oneplus.com
Click to expand...
Click to collapse
New version does not work as well. Flash the stock boot img to get out of bootloop.
Jacobo123 said:
My Phone was running Android 11 perfectly fine. Has been for about a week and a half, and I've decided that I don't like the OS. I was going to flash a custom ROM and went to create a nandroid before flashing. Literally all I did was boot into recovery and TWRP got stuck in a bootloop, the TWRP splash screen appears, crashes and then reappears about 2 seconds later, now when I try to boot back into system, TWRP appears instead and continues to bootloop. I can enter fastboot mode but that's all.
So far I've tried
Booting TWRP through fastboot. Failed another bootloop.
Rebooting through ADB. Boots into TWRP.
Rebooting Bootloader. Seems to do nothing.
Does anyone have any ideas on how to fix this ? It seems strange to me that something as simple as booting recovery could do this much harm. I also have a nandroid backup stored on the device from about a month ago, so the data loss wouldn't be THAT major, but I'm also not sure how I could access it without system or recovery access.
Click to expand...
Click to collapse
Did your problem got solved?As i updated to A11 a few days ago and am facing the same problem since.Did flashing the new version of twrp worked for you?
Jacobo123 said:
My Phone was running Android 11 perfectly fine. Has been for about a week and a half, and I've decided that I don't like the OS. I was going to flash a custom ROM and went to create a nandroid before flashing. Literally all I did was boot into recovery and TWRP got stuck in a bootloop, the TWRP splash screen appears, crashes and then reappears about 2 seconds later, now when I try to boot back into system, TWRP appears instead and continues to bootloop. I can enter fastboot mode but that's all.
So far I've tried
Booting TWRP through fastboot. Failed another bootloop.
Rebooting through ADB. Boots into TWRP.
Rebooting Bootloader. Seems to do nothing.
Does anyone have any ideas on how to fix this ? It seems strange to me that something as simple as booting recovery could do this much harm. I also have a nandroid backup stored on the device from about a month ago, so the data loss wouldn't be THAT major, but I'm also not sure how I could access it without system or recovery access.
Click to expand...
Click to collapse
At first.- Stable TWRP is not available til now for OOS11
For TWRP to work your device must be decrypted.
This link will help you, will get full details
- https://forum.xda-developers.com/t/...-oneplus-7-pro.3931322/page-152#post-84727891
For more questions and help, please post in that twrp thread only
Regards

Categories

Resources