Help ME i am stuck in flashing nothing is helping me - YU Yuphoria

And Some times it get force closed or not responding and error out of the memory help me what to do !!

SOLUTION
Install YuWare and Then install Drivers Through YouWare Application(PDAnet+ Phone Drivers will be installed Autromatically ). Then use CMD prompt to FLASH.

Related

HELP -HTC ONE S Custom Rom can not be installed

Hi , I want to flash cm11 rom for my HTC One S but it is not seem to be achieved ((
1) I cannot install custom recovery because my phone is not working in fastboot mode for my pc , when i plug my phone to pc in fastboot mode it gives "Unknown Device" , i am on w8.1 i installed all htc drivers , fastboot and adb drivers ,turned signature verification off , but it is still not working , i also tried in w7 but still the same problem
2)Super SU in my HtC not working also , it says it cannot update su binary , so i cannot fix this problem because i cannot flash supersu update in recovery mode :crying::crying:
It is very bad situation i cannot flash a rom , please guys i need help
Hi there,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
sabir.aliev said:
Hi , I want to flash cm11 rom for my HTC One S but it is not seem to be achieved ((
1) I cannot install custom recovery because my phone is not working in fastboot mode for my pc , when i plug my phone to pc in fastboot mode it gives "Unknown Device" , i am on w8.1 i installed all htc drivers , fastboot and adb drivers ,turned signature verification off , but it is still not working , i also tried in w7 but still the same problem
2)Super SU in my HtC not working also , it says it cannot update su binary , so i cannot fix this problem because i cannot flash supersu update in recovery mode :crying::crying:
It is very bad situation i cannot flash a rom , please guys i need help
Click to expand...
Click to collapse
Is your bootloader already unlocked?
Phone stucks on "Entering recovery" screen
Hi guys
First of all, I'm absolutely new in this theme (rooting, installing custom recovery image and etc.).
I want to install CM12 on my HTC one S and due of this have done few steps (first and second) from following theme http://forum.xda-developers.com/showthread.php?t=1583427
Both of this steps completed without any errors (bootloader unlocked and recovery image TWRP 2.8.6.1, as recommended, loaded into smartphone).
But when I tried to enter into recovery menu or mode (I don't know actually ) smartphone stucks on loading screen with messages "Entering Recovery..." on the top and "This build is for development purposes only. Do not distribute outside of HTC... blah blah blah" on the bottom. I have waited for almost 20 minutes but nothing happend.
Neverthless, I can reboot smartphone into normal mode without any troubles.
Please, help me guys. What I should check?
Thanks in advance for your help!
andypod said:
Hi guys
First of all, I'm absolutely new in this theme (rooting, installing custom recovery image and etc.).
I want to install CM12 on my HTC one S and due of this have done few steps (first and second) from following theme http://forum.xda-developers.com/showthread.php?t=1583427
Both of this steps completed without any errors (bootloader unlocked and recovery image TWRP 2.8.6.1, as recommended, loaded into smartphone).
But when I tried to enter into recovery menu or mode (I don't know actually ) smartphone stucks on loading screen with messages "Entering Recovery..." on the top and "This build is for development purposes only. Do not distribute outside of HTC... blah blah blah" on the bottom. I have waited for almost 20 minutes but nothing happend.
Neverthless, I can reboot smartphone into normal mode without any troubles.
Please, help me guys. What I should check?
Thanks in advance for your help!
Click to expand...
Click to collapse
Hi
Problem is solved. My htc one s with the s3 processor not with s4 and this is why I couldn't load recovery mode.
Thanks anyway

bootloop

Hi guys
I recently tried recover.img on my karbonn a11* using mtk tools.when i tried install it guided me to the recovery menu where i selected install update from sdcard but i found nothing it showed me \...... And went back to the main menu , when i tried to reboot it failed and got stuck in bootloop . i tried to copy and install via adb push command but it gave error : closed . i would teally appricate your help.

[Completed] BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) SP Flash Tool mtk6572

Hi there guys @ xda.
I need help with my mtk6572 phone which i bricked in a noob way.
I need help flashing it with SP Flash Tool which gives an error as described in title.
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it worked.
I experienced a bug on the recovery and decided i wanted to put the stoc recovery back.
I flashed it back and the recovery booted fine, wiped chache and did factory reset.
After i did that my phone got stuck on boot animation.
I then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the forma all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Right after the format i got an error that said that my firmware is not for my phone and failed.
Now if i try to format or download the stock rom (which i backed up from my device before flashing)
i get the error code in the title.
I tried uninstalling all the mtk drivers from my pc. When i connect my device it is picked up in device manager
as "unknown device", i then updated the drivers with mediatek preloader driver (and tried all the mtk drivers out there)
but the flash tool still gives the same error.
After i press the download button, and connect my phone, the bar at the bottom goes to 100%(red colour) then stays like that for 41 seconds.
Then it gives the error code and fails to flash.
I tried everything, from removing the battery, pressing vol+, vol-, power and all the combos in between, nothing.
If someone could help me unbrick my phone, i would be very greatfull.
P.S I have the stock rom backed up from my device and prepared with mtk droid tools for flash tool.
Hi,
Thanks for using XDA assist.
Please read this guide if you haven't already:
[TUT]MTK Android (Sp flash tool ) tutorial
If the guide doesn't help, please create a XDA account and ask your question in the link directly above as well.
Good Luck! - gsstudios

need help

1.my j701f is not detected on pc, I installed the USB driver but it still error.
2. in mode twrp, if I flashing rom its always restart on logo Samsung.
please help me

Nokia 3 TA-1032 Preloder deleted while flashing.

I was trying to unroot my device by re flashing firmware using SP Tools. But after flashing Device is sucked in a reboot loop. Only vibrate. I tried reflashing. This time when I try to flash it gives me an error "not enough storage" . Stupid me I have done fomat + download option in SP tools. Fomat is done correctly But download was incomplete because again it gives me the same error. This time I think I killed device myself. Now PC does not detect device as a VCom preloader. it detect as mtk usb com. D u have any solutions for re flash preloder.

Categories

Resources