I am having a huge problem i wanted to root my phone to android 6.0 which didnt work now i want it back to stock i downloaded the stock rom but when i try to install it it says meta-inf missing
I installed meta-inf in that stock from i have taken it from gapps
Now it says that i am missing md5 files
please help
edit:
i got it fixed i found an download
download for the progam that installs the update: https://dl.dropboxusercontent.com/u...1072] Restore to Android 5.0.2 (22.46.28).zip
make sure you add mfastboot in the map of the progam
the android download: https://mega.nz/#!wsJTlJiT!5vqUrZUqxDrb47RvUx0vkPKe8pitQC8L214yKSrCfUo
the post that helped me to install:
http://forum.xda-developers.com/mot...ool-moto-g-2015-xt1072-restore-t3124915/page2
Florianbos said:
I am having a huge problem i wanted to root my phone to android 6.0 which didnt work now i want it back to stock i downloaded the stock rom but when i try to install it it says meta-inf missing
I installed meta-inf in that stock from i have taken it from gapps
Now it says that i am missing md5 files
please help
Click to expand...
Click to collapse
Hello,
For reverting back to stock, you may follow the instructions in this thread Restore to stock XT1072
Good luck!
-Vatsal
Vatsal said:
Hello,
For reverting back to stock, you may follow the instructions in this thread Restore to stock XT1072
Good luck!
-Vatsal
Click to expand...
Click to collapse
download links dont work...
Florianbos said:
download links dont work...
Click to expand...
Click to collapse
Hello,
You may try posting in the thread, the people having the download could mirror for you
-Vatsal
Related
I flashed CM 9 and would like to go back to stock. I have a nandroid backup but wifi got messed up. So how can I flash the stock ROM. All help is greatly appreciated.
Thanks,
Jordan
jordan123hi said:
I flashed CM 9 and would like to go back to stock. I have a nandroid backup but wifi got messed up. So how can I flash the stock ROM. All help is greatly appreciated.
Thanks,
Jordan
Click to expand...
Click to collapse
Download the stock firmware from asus. unzip the first folder. take the resulting zip file and flash it with recovery.
At least this is what I have read in the development section.
TXKSSnapper said:
Download the stock firmware from asus. unzip the first folder. take the resulting zip file and flash it with recovery.
At least this is what I have read in the development section.
Click to expand...
Click to collapse
Thanks worked great!
How to get back to stock safely? I have seen the thread in the general area for showing the zips but I do not know which one to download and what to do after downloading. I bought it from a T-Mobile Store USA. Does it matter what baseband? How do I know if I have old or new? Please help with as much information as possible so I can get back to stock safely, thank you.
download LG USB drivers and LGMDP, install them, if the phone is not detected boot into recovery, mounts, and mount usb, now your phone is detected, update to latest android version available, that will make your phone to run GB 2.3 stock, if LGMDP it says that you have latest version just do it anyway
you will loose root and recovery
useing KDZ for unexperienced people is dangerous, but if you do, do not pull out battery before everything is done(if it takes 1 hour you will have to wait), unless you want to hardbrick your phone
androiddownloader said:
How to get back to stock safely? I have seen the thread in the general area for showing the zips but I do not know which one to download and what to do after downloading. I bought it from a T-Mobile Store USA. Does it matter what baseband? How do I know if I have old or new? Please help with as much information as possible so I can get back to stock safely, thank you.
Click to expand...
Click to collapse
Try tutorial mentioned in sticky area:thumbup:
Baseband doesn't matter in this case,if you are flashing stock rom from pc.
And if you're worried as that much try to flash Open Optimus/Oxygen/Gingersnap rom/s from recovery.
they all are stable and give you stock experiencesurely.
optimusPRIME said:
Try tutorial mentioned in sticky area:thumbup:
Baseband doesn't matter in this case,if you are flashing stock rom from pc.
And if you're worried as that much try to flash Open Optimus/Oxygen/Gingersnap rom/s from recovery.
they all are stable and give you stock experiencesurely.
Click to expand...
Click to collapse
yes ive seen the sticky saying "repositroy/stock rom" i see the file but i dont know which one to download and how to do it after having the file
androiddownloader said:
yes ive seen the sticky saying "repositroy/stock rom" i see the file but i dont know which one to download and how to do it after having the file
Click to expand...
Click to collapse
If you're going back on stock for changing baseband try this one - http://forum.xda-developers.com/showthread.php?t=1149530
And if you really want stock original rom then go here http://forum.xda-developers.com/showthread.php?t=1168245
Warning - go above link if you are on new basband(v20x).otherwise if you're on old baseband(v10x) this won't help you.
optimusPRIME said:
If you're going back on stock for changing baseband try this one - http://forum.xda-developers.com/showthread.php?t=1149530
And if you really want stock original rom then go here http://forum.xda-developers.com/showthread.php?t=1168245
Warning - go above link if you are on new basband(v20x).otherwise if you're on old baseband(v10x) this won't help you.
Click to expand...
Click to collapse
how to know if i have new baseband? and how to get back stock recovery after flashing that stock rom?
androiddownloader said:
how to know if i have new baseband? and how to get back stock recovery after flashing that stock rom?
Click to expand...
Click to collapse
Our device doesn't support/having stock recovery ,only customs recovery support .
Check in setting - about device section -baseband version .
If you saw there v10x so you‘re on old baseband & if v20x you are on New baseband.
If you are on v20x then simply follow previous link instructions
optimusPRIME said:
Our device doesn't support/having stock recovery ,only customs recovery support .
Check in setting - about device section -baseband version .
If you saw there v10x so you‘re on old baseband & if v20x you are on New baseband.
If you are on v20x then simply follow previous link instructions
Click to expand...
Click to collapse
then lg p500 never had stock recovery of any kind?
androiddownloader said:
then lg p500 never had stock recovery of any kind?
Click to expand...
Click to collapse
Nope
I followed nearly all the steps in installing cm10.1 build 20130322 but the gapps file was corrupted and i couldn't flash it
so i just went ahead and rebooted the system and guess what?
white screen!
so i went to restore boot from advanced restore and guess what again?
bootloop!
I have just decided to give up on installing custom roms and if the mods wanna delete this thread
No problem!
Bhuyan23 said:
I followed nearly all the steps in installing cm10.1 build 20130322 but the gapps file was corrupted and i couldn't flash it
so i just went ahead and rebooted the system and guess what?
white screen!
so i went to restore boot from advanced restore and guess what again?
bootloop!
I have just decided to give up on installing custom roms and if the mods wanna delete this thread
No problem!
Click to expand...
Click to collapse
You should not use restore boot method in CM ROMs. You may also brick device if you do it, better use some GB ROM if you are getting white screen issue.
Bhuyan23 said:
I followed nearly all the steps in installing cm10.1 build 20130322 but the gapps file was corrupted and i couldn't flash it
so i just went ahead and rebooted the system and guess what?
white screen!
so i went to restore boot from advanced restore and guess what again?
bootloop!
I have just decided to give up on installing custom roms and if the mods wanna delete this thread
No problem!
Click to expand...
Click to collapse
flash an english baseband then flash cm
flash the first rom through odin
and there you go, unbrick
ShadowsDie said:
flash an english baseband then flash cm
flash the first rom through odin
and there you go, unbrick
Click to expand...
Click to collapse
can anybody just explain to me what causes this white screen
Bhuyan23 said:
can anybody just explain to me what causes this white screen
Click to expand...
Click to collapse
Because the GB ROM you had earlier is from a country that has something changed,(i don't know what) it causes problems when you flash any CM
The solution is flashing an English rom there will be no such change and it will work
Do you understand now?
P.S. Such a ROM with this problem are used to be from india firmwares
Do you have an indian firmware?
ShadowsDie said:
Because the GB ROM you had earlier is from a country that has something changed,(i don't know what) it causes problems when you flash any CM
The solution is flashing an English rom there will be no such change and it will work
Do you understand now?
P.S. Such a ROM with this problem are used to be from india firmwares
Do you have an indian firmware?
Click to expand...
Click to collapse
Absolutely! I do have an Indian firmware
by the way I thought it had something to do with the model variant
but when I checked the back of the battery I found this
Can you please provide the sales code for an english rom? for example XEU
Bhuyan23 said:
Absolutely! I do have an Indian firmware
by the way I thought it had something to do with the model variant
but when I checked the back of the battery I found this
Click to expand...
Click to collapse
One suggestion don't provide such kind of pics because it has your IMEI number,
So for privacy issue you have to protect that number.
Bhuyan23 said:
Can you please provide the sales code for an english rom? for example XEU
Click to expand...
Click to collapse
For indian firmware issue then I'm not agree that, its issue by indian firmware.
I always flash custom roms on indian firmware & till now i didn't face any issue like white screen or brick device.
-Lets do this step by step.
Do you have indian firmware ?
(Latest firmware DDMF2 or try any old one)
Flash back it through odin
-Then download CWM v5.5
(You get link from my rom Pure Galaxy v1.0 thread in development section, check last page)
Check the version again
CWM v5.5 not v6 or v5.0
-root your device through CWM
-& now finally go n try to flash cm rom, I hope this time you will never face any white screen issue.
j.posarekar70 said:
One suggestion don't provide such kind of pics because it has your IMEI number,
So for privacy issue you have to protect that number.
For indian firmware issue then I'm not agree that, its issue by indian firmware.
I always flash custom roms on indian firmware & till now i didn't face any issue like white screen or brick device.
-Lets do this step by step.
Do you have indian firmware ?
(Latest firmware DDMF2 or try any old one)
Flash back it through odin
-Then download CWM v5.5
(You get link from my rom Pure Galaxy v1.0 thread in development section, check last page)
Check the version again
CWM v5.5 not v6 or v5.0
-root your device through CWM
-& now finally go n try to flash cm rom, I hope this time you will never face any white screen issue.
Click to expand...
Click to collapse
I just know that people here solved this bug flashing an english ROM.
But maybe you are right, he should try.
Hi,
I accidentally removed the system APK's which now I can't run Action memo. My device is rooted.
Can I restore all the APK's from the stock rom via ODIN ?
Thanks
asus_boy said:
Hi,
I accidentally removed the system APK's which now I can't run Action memo. My device is rooted.
Can I restore all the APK's from the stock rom via ODIN ?
Thanks
Click to expand...
Click to collapse
1. Wrong forum, should have asked in the Q&A forums.
2. You can just flash stock ROM via Odin and everything will be fixed.
nicholaschum said:
1. Wrong forum, should have asked in the Q&A forums.
2. You can just flash stock ROM via Odin and everything will be fixed.
Click to expand...
Click to collapse
Thank you so much. I will do it.
Sorry for the wrong forum.
asus_boy said:
Thank you so much. I will do it.
Sorry for the wrong forum.
Click to expand...
Click to collapse
if you do Odin method, you will loose root, then you have to re root again,
You can also go for factory reset and that should also restore all the system apps, but do make backup of your contacts/sms etc as it will wipe everything
Hi,
I need to go back to B370. From OP (http://forum.xda-developers.com/honor-6/orig-development/rom-cyanogenmod-11-honor-6-t3019056), I need keep the B370 tar on external storage/dload and that's it. Will it restore my phone's recovery? I am following this article (http://tecknics.com/how-to-update-indian-honor-6-to-lollipop-beta-emui-3-1/) for lollipop.
I am using the 370 from here (https://mega.co.nz/#F!mJ9gDQCI!0L1nCxD7G4yoshAPvUlQTQ). Will it make a difference?
Far_SighT said:
Hi,
I need to go back to B370. From OP (http://forum.xda-developers.com/honor-6/orig-development/rom-cyanogenmod-11-honor-6-t3019056), I need keep the B370 tar on external storage/dload and that's it. Will it restore my phone's recovery? I am following this article (http://tecknics.com/how-to-update-indian-honor-6-to-lollipop-beta-emui-3-1/) for lollipop.
I am using the 370 from here (https://mega.co.nz/#F!mJ9gDQCI!0L1nCxD7G4yoshAPvUlQTQ). Will it make a difference?
Click to expand...
Click to collapse
It won't make a difference. Just follow the steps in CM thread to go back to B370. After that follow the guide on the website to update to Indian Lollipop beta update.
shubh_007 said:
It won't make a difference. Just follow the steps in CM thread to go back to B370. After that follow the guide on the website to update to Indian Lollipop beta update.
Click to expand...
Click to collapse
The steps in CM11 thread didn't work for me. I had to manually flash system, boot, etc, and then update!
Far_SighT said:
The steps in CM11 thread didn't work for me. I had to manually flash system, boot, etc, and then update!
Click to expand...
Click to collapse
OK, but now you have what you wanted? If you need any help ask me.