Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD Cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about this guide before following it!
* YOU are choosing to make these modifications.
Changelog: Stable
1) Initial release of TWRP-recovery
2) Has all features and fixes
Installation
1.)Turn on usb debugging in developer option.
2.)Power off your device, press and hold Volume Down + Home + Power buttons at the same time until you see a Warning with a Yellow Triangle.
3.)Now press Volume Up button. Your phone now is in ODIN MODE (Download Mode).
4.)Open Odin on PC.
5.)UNTICK everything
6.)Connect Phone to PC using USB Cable.(You will see added message on Odin)
7.)On Odin click on PDA(till version 3.07) OR click on AP(after version 3.09)
8.)Select the recovery.tar.md5
9.)Press on start.
10.)Remove battery quickly after Odin says pass before it boots up.
11.)Insert battery again. Press Power + Volume Up + Home button, and hold till you see the Samsung logo.
Download
1. Odin - Here
2. Recovery - Here Mirror AndroidFileHost
3. Recovery - https://www.androidfilehost.com/?fid=24591000424950299 v2
Thanks to @ali7_has for testing this build
ChangeLog v2
1. Added OTG support
2. Added F2FS file system for DATA partition
Credits
@CTXz
Source :- Here
Code:
Now recovery is officially accepted by twrp
the recovery is for both the device n750 and n7505
https://twrp.me/devices/samsunggalaxynote3neon750.html
Thanks!!!!
bodyzen said:
Thanks!!!!
Click to expand...
Click to collapse
Pleasure .. [emoji1]
Good Job work fine
Just flashed, works great on stock 5.1 on N7505
Wysłane z mojego SM-N7505 przy użyciu Tapatalka
TheTechGuy96 said:
Just flashed, works great on stock 5.1 on N7505
Wysłane z mojego SM-N7505 przy użyciu Tapatalka
Click to expand...
Click to collapse
f1mbc said:
Good Job work fine
Click to expand...
Click to collapse
Thank you [emoji4]
Sent from my MotoG3 using Tapatalk
Twrp 3.0.2 is up download from twrp.me
Sent from my MotoG3 using Tapatalk
Firstly thanx to you it flashed safely. But i have a question that when i press volume up+home+power button then samsung logo appears and in the top left corner there is written that RECOVERY IS NOT SEANDROID ENFORCING then open recovery. What is meant by this. Please reply me.
Using note 3 neo n750
sunny0786 said:
Firstly thanx to you it flashed safely. But i have a question that when i press volume up+home+power button then samsung logo appears and in the top left corner there is written that RECOVERY IS NOT SEANDROID ENFORCING then open recovery. What is meant by this. Please reply me.
Using note 3 neo n750
Click to expand...
Click to collapse
I think it's something to do with selinux or knox
You can ignore it btw
Sent from my MotoG3 using Tapatalk
About installing rom
Can i install any rom using twrp 3.0.0?
If yes then plz plz plz provide me the instruction that how to install or if no then what is the procedure to install.
Thanx a lot to reply....
Using note 3 neo n750
sunny0786 said:
Can i install any rom using twrp 3.0.0?
If yes then plz plz plz provide me the instruction that how to install or if no then what is the procedure to install.
Thanx a lot to reply....
Using note 3 neo n750
Click to expand...
Click to collapse
It's simple to flash a rom
1. Wipe > see below > swipe to factory reset
2. Go back > install > select the zip
3. Reboot to system
Sent from my MotoG3 using Tapatalk
FireLord said:
It's simple to flash a rom
1. Wipe > see below > swipe to factory reset
2. Go back > install > select the zip
3. Reboot to system
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
There is so many options in wipe which options i have to tick???
sunny0786 said:
There is so many options in wipe which options i have to tick???
Click to expand...
Click to collapse
It's twrp only na?
Wipe data, dalvik, system
Sent from my MotoG3 using Tapatalk
A this is twrp go to my sm-n750 hl3g 5.1.1 root acess. Help please?
Would this work on the N7507 by chance?
Sent from my Nexus 6P using Tapatalk
dirtyreturn said:
Would this work on the N7507 by chance?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Yes it will work
Sent from FireLord's device
https://www.androidfilehost.com/?fid=24591000424950299 v2 unofficial build
i committed at twrp gerrit for F2FS support and otg but even after 2 months no one merged it so here is new build by me.
ChangeLog
1. OTG compatible
2. F2FS support added, only works with cm and cm based roms tested and its stable..
ill recommend to flash this new one cuz new cm builds will support f2fs too and formatting from ext4 to f2fs wipes your INTERNAL storage BE careful for your data
FireLord said:
Twrp 3.0.2 is up download from twrp.me
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Does it work on n7505 ?
XMoDuLeSx said:
Does it work on n7505 ?
Click to expand...
Click to collapse
Yes it works
Sent from my MotoG3 using Tapatalk
Related
Hi guys,i would like to know if anyone could tell me if exist a method to root the note 3 neo,without change the knox counter.
P.S.The root must be done every time a new firmware comes out?
Thanks a lot
Rob
What do you think about this?:
http://forum.xda-developers.com/showthread.php?t=2783157
m80dv said:
What do you think about this?:
http://forum.xda-developers.com/showthread.php?t=2783157
Click to expand...
Click to collapse
Has anyone tried this towelroot on any galaxy note 3 neo versions?
Edit: Well m80dv has tested it on his note 3 neo (SM-N7505) and it failed
actually towelroot method don't work on exynos CPU!
Sent from my SM-N7505 using XDA Free mobile app
Towelroot V2 not working!
Very sad
m80dv said:
Towelroot V2 not working!
Click to expand...
Click to collapse
This is becoming to be worried.
Hopefully in the near future we will be luckly.
There one more called one click root search it for on Google
Sent from my SM-N750 using Tapatalk
Update: try this http://www.shuame.com/en/root/
fahad5596 said:
There one more called one click root search it for on Google
Sent from my SM-N750 using Tapatalk
Update: try this http://www.shuame.com/en/root/
Click to expand...
Click to collapse
You tested or working in yours?
After rooted Knox 0x0?
I want to test but I can't because I am waiting for the kitkat update :/
Sent from my SM-N750 using Tapatalk
---------- Post added at 10:13 PM ---------- Previous post was at 10:12 PM ----------
m80dv said:
You tested or working in yours?
After rooted Knox 0x0?
Click to expand...
Click to collapse
I want to test but I can't because I am waiting for the kitkat update :/
Sent from my SM-N750 using Tapatalk
Towelroot V3 in Note 3 Neo N7505 (exynos) NOT work
m80dv said:
Towelroot V3 in Note 3 Neo N7505 (exynos) NOT work
Click to expand...
Click to collapse
Even with modstrings?
warfab said:
Even with modstrings?
Click to expand...
Click to collapse
Yes, I tested different combinations without success
For Note 3 neo N7507 devices, you can try this method-
Root you NEO on ROM Manager!
the rom-manager.com is bad!
noeybou said:
For Note 3 neo N7507 devices, you can try this method-
Root you NEO on ROM Manager!
Click to expand...
Click to collapse
Is there a way after rooting the device to change the knox-counter to 0?
Gesendet von meinem SM-N7505 mit Tapatalk
No way,even TriangleAway cannot undo knox tripping once you rooted.
Sent from my SM-N7505 using XDA Free mobile app
Is the first time that I own a Phone, that is not rooted directly after buying it. Knox is a bad invention. I'm wondering how long I can resist; -)
Greets
Sent from my SM-N7505 using XDA Free mobile app
Je je je. ..A few days and no more Einreb
Enviado desde mi SM-N7505 mediante Tapatalk
Rooted? Do apply these power ups
* 9 PROMISING TWEAKS TO 'GEAR UP' OUR BELOVED NOTE WITH :-
1. ROOT your Android (without hesitating).
Install Custom Recovery like TWRP or ClockWorkMod.
2.Install Wanam Exposed from https://play.google.com/store/apps/details?id=ma.wanam.xposed and checkout Enn no. of Amazing Performance and Battery Modules.(for all Aspirants )
3. For all Samsung users struggling with touchwiz lag, checkout
https://play.google.com/store/apps/details?id=ma.wanam.dvfs and continue therein . (This is similar to Overclocking at need but safer)
4. Install https://play.google.com/store/apps/details?id=com.kislay.bootshellcommand and add the following script (for all) :
#!/system/bin/sh
(while :
do
sf=$(service list | grep -c "SurfaceFlinger")
if [ $sf -eq 1 ]
then
service call SurfaceFlinger 1008 i32 1
break
else
sleep 2
fi
done
) &
exit
To permanently disable Hardware overlays.(for all)
5.To increase Effective Resolution of your screen, go for this: http://forum.xda-developers.com/showthread.php?t=1993530 (for all)
6.For Better Battery calibration (all) (non Root):
https://play.google.com/store/apps/details?id=dc.batterycalibrationpro
(Root):
https://play.google.com/store/apps/details?id=com.vitula.batterycalibration
7.Install Greenify/ Tasker/ Seeder/ Minfree.Also RomToolbox https://play.google.com/store/apps/details?id=com.jrummy.liberty.toolbox
And disable unnecessary Startup programs and Freeze bloatwares(unnecessary and creepy System-apps) from App manager in Rom ToolboX. (For all)
8.The Master of all Tweaks!
http://phtechbook.blogspot.in/2014/06/performance-and-battery-tweak-all-android.html?m=0 .
9. http://www.droidviews.com/speed-up-chrome-browser-on-your-android-windows-mac-linux/
For Faster Chrome.
and guys,
Fb sole Group for all N3N users:
https://www.facebook.com/groups/656499817758101/
I have been compiling More Tweaks and Updates on my page, friends,
https://www.facebook.com/BACK2TECHH ..Please like to stay connected
Thanks just conveys Smiles
robsup79 said:
Hi guys,i would like to know if anyone could tell me if exist a method to root the note 3 neo,without change the knox counter.
P.S.The root must be done every time a new firmware comes out?
Thanks a lot
Rob
Click to expand...
Click to collapse
my solution to get root permissions is no boot rom, whereas cf root did not work, install TWRP using odin, after I installed TWRP with Prometheus, after I started prometeus, I returned to TWRP and I installed supersu update 2.02 now I have root permissions
Hey guys I've ported the S6 Marshmallow Style SystemUI made by @blackwings66 for our G800F.
I dont know if it will work also in other S5 Mini variants.
Link to the original thread
Install Instructions:
1 Reboot Recovery
2 Make a Nandroid Backup (Recommended)
3 Flash File
4 Reboot to System
Download Here
Decryption Key: !2ZV23CX05judIEricogkWMhZcvOug72u6Pa0N4c3hRk
Thank you very much, for install this theme, wipes (data, cache, dalvik, system) are necessary or not ?
Envoyé de mon SM-G800F en utilisant Tapatalk
---------- Post added at 08:38 PM ---------- Previous post was at 08:35 PM ----------
And please can you create a S6/S7 ROM for G800F ? Or can you help me to make this ROM ?
Envoyé de mon SM-G800F en utilisant Tapatalk
No it doesn't need any wipe
Currently I'm making an S7 port but it's based on stock 5.1.1 touchwiz, i think that later I will make a full S7 port. I don't make it now because it's my primary phone and I don't wanna restore any time I get a bootloop
Ok thank hou but I have making S7 ROM but can you explain or give me your updater-script file and update-binary is please ?
Are you using a system.new.dat file for your ROM or not ?
Envoyé de mon SM-G800F en utilisant Tapatalk
G800M
Work
Hi, thanks for this, but let me report you some bugs
1st, the clock is a little bit too near to the battery icon in the status bar..
2nd, clicking on the down arrow in the notification panel doesn't work :/
3rd, the text "Tap here to connect devices" is not translated (in french in my case)
(Pics are below )
Well, I think that's all, and it's good for a first release, thanks for this again, have a nice day !
firepenguin said:
Hey guys I've ported the S6 Marshmallow Style SystemUI made by @blackwings66 for our G800F.
I dont know if it will work also in other S5 Mini variants.
Link to the original thread
Install Instructions:
1 Reboot Recovery
2 Make a Nandroid Backup (Recommended)
3 Flash File
4 Reboot to System
Download Here
Decryption Key: !2ZV23CX05judIEricogkWMhZcvOug72u6Pa0N4c3hRk
Click to expand...
Click to collapse
Can you make this UI for g800h?
I cant insert my Sim Pin, it is not possible to comfirm it.
passie99 said:
I cant insert my Sim Pin, it is not possible to comfirm it.
Click to expand...
Click to collapse
I know it, i'm gonna fix this early
When a complete S7 port rom?
the extracted systemui is the g800h version
i think something went wrong with your upload?
PsyLluminat 23 said:
the extracted systemui is the g800h version
i think something went wrong with your upload?
Click to expand...
Click to collapse
Are you sure? Because mine is for G800F and it works, with only a bug with SIM PIN.
@PsyLluminat 23 Try this.
Andrea224 said:
@PsyLluminat 23 Try this.
Click to expand...
Click to collapse
this one realy work on your g800f?? if i try to install it manually the installer says parsing failure, this means it wouldnt work when i flash it
PsyLluminat 23 said:
this one realy work on your g800f?? if i try to install it manually the installer says parsing failure, this means it wouldnt work when i flash it
Click to expand...
Click to collapse
Yes, I tried it and it worked. What I did is flash the stock rom first (I'm at the moment on CM13) and then go into TWRP 3.0.0 and flash it without any problem.
Andrea224 said:
Yes, I tried it and it worked. What I did is flash the stock rom first (I'm at the moment on CM13) and then go into TWRP 3.0.0 and flash it without any problem.
Click to expand...
Click to collapse
had tried it many times in different ways but after install there is no Systemui when the rom is booted..
thank u anyway, think i go back to tesla rom and wait for a full s6/s7 port
firepenguin said:
No it doesn't need any wipe
Currently I'm making an S7 port but it's based on stock 5.1.1 touchwiz, i think that later I will make a full S7 port. I don't make it now because it's my primary phone and I don't wanna restore any time I get a bootloop
Click to expand...
Click to collapse
for the s7 port:
I could be a (very) happy tester. I own a g800f and really want to have a s6/7 port for this phone, so I could test anything you want
EDIT:
I just installed the .zip available for download and found a couple of bugs:
-the fiirst one is in the lockscreen, where it won't let you enter your pin number (I am now using the phone without SIM)
-the second one is in the notifications panel, where it doesn't let you expand quick options. I tap on the down arrow, it does its animation, but then nothing happens (this is just a thing that I don't personally use)
nico_vo said:
for the s7 port:
I could be a (very) happy tester. I own a g800f and really want to have a s6/7 port for this phone, so I could test anything you want
Click to expand...
Click to collapse
I could also be a tester for the S7 port. I'm waiting a port for G800F for a long time.
Sent from my SM-G800F using XDA-Developers mobile app
Andrea224 said:
I could also be a tester for the S7 port. I'm waiting a port for G800F for a long time.
Sent from my SM-G800F using XDA-Developers mobile app
Click to expand...
Click to collapse
Do you also have the sim pin issue?
Enviado desde mi SM-G800F mediante Tapatalk
nico_vo said:
Do you also have the sim pin issue?
Enviado desde mi SM-G800F mediante Tapatalk
Click to expand...
Click to collapse
Yes, it's a common bug.
Sent from my SM-G800F using XDA-Developers mobile app
STOCK KERNEL FOR NOTE 4 910C (Exynos)
WORKS WITH 6.0.1 TW!!
Code:
*** Disclaimer
This is a stock kernel. Please be aware that it is for 910C Exynos only.
I can not guarantee that it will work for other devices.
Use it at you own risk. If anything goes wrong I take no responsibility.
Introduction
This kernel is build from stock samsung PCB kernel sources I wanted to keep it as stock as possible for people like me that are satisfied with the stock kernel, do not want OC, UV.
The Kernel is SElinux Permissive.
Click to expand...
Click to collapse
Description
This is the stock samsung kernel source, but changed the SELinux policy from enforcing to permissive. In the settings app, it still shows as "Permissive". Removed the restrictions from kernel source regarding rooting etc.
Click to expand...
Click to collapse
Instructions
-Install Twrp (Info - Download Latest) Using Odin. Select not to reboot and remove your battery when finished. Insert battery holding VolumeUP+home+Power. This will get you into TWRP
-Reboot to Recover
-Flash kernel throught TWRP
-Clear Darvik/Cache throught TWRP
-Install SU beta 2.71
-Reboot and wait some minutes... If phone does not start in 20 minutes then restart and wait again.
-boot system and remove with titanium backup anything that has to do with Knox and security log....
*******
Click to expand...
Click to collapse
Downloads
Mod Edit : Links Removed
OLDER Versions
Mod Edit : Links Removed
Uninstall
-Stock kernel PCB Ramdisk
[/quote]
Donate
Keep me motivated Click HERE
Click to expand...
Click to collapse
Sources
Soon...
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Samsung
* Google
* All of you that support me thought the thread!
Reserved
Thanks bro. Keep it up
Sent from my SM-N910C using Tapatalk
Thank you mate! Keep up the good job!
Hi, what are tweaks different from stock kernel and change log
Sent from my SM-N910C using Tapatalk
Is this n910H compatible?
thanks
Thanx man and keep up the great work
Yahoo!! Talexop is back with Marshmallow.
Thank you and keep update.
Sent from my SM-N910C using Tapatalk
Ok. Thank's
Enviado desde mi SM-N910C mediante Tapatalk
thanks man
أرسلت من SM-G935F بإستخدام تاباتلك
very nice
Sent from my SM-N910C using XDA-Developers mobile app
1 question I'm on your 5.1.1 talexop how can I use ur 6.0.1 since I can't update from phone, I can't find answers because I'm lost
Sent from my SM-N910C using XDA-Developers mobile app
Sorry but I do not understand exactly what you want to do... Are you already to 6.0.1 or 5.1.1 .... This kernel only works with 6.0.1 and must be flashed from TWRP.... Also you will need to root it afterwards using the link in first page..
Teşekkürler
SM-N910C cihazımdan Tapatalk kullanılarak gönderildi
I'm on 5.1.1 how could I update since I've rooted through your methods for the 5.1.1 with kernel. is it possible to update through the PC
Sent from my SM-N910C using XDA-Developers mobile app
Please make a N910H version too. Im a fan of your kernel
Sent from my SM-N910H using Tapatalk
vodanhdaisu said:
Please make a N910H version too. Im a fan of your kernel
Sent from my SM-N910H using Tapatalk
Click to expand...
Click to collapse
what supports N910C supports N910H device both have same source and hardware
Crozar said:
I'm on 5.1.1 how could I update since I've rooted through your methods for the 5.1.1 with kernel. is it possible to update through the PC
Sent from my SM-N910C using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello,
Are you with 6.0.1 rom?
If so then the main idea is that you will have to flash my kernel and then su chainfire 2.71 from recovery..
Please contact me for more info..
Will try this soon!
Delete thread
Sorry guys i made a rom but its failed
Is it kitkat based rom or marshmallow based
Sent from my GT-N7100 using Tapatalk
Obviously it will be kitkat! We can't have lollipop rom as we don't have proper kernel!
Στάλθηκε από το SM-N910C μου χρησιμοποιώντας Tapatalk
Bro Android 4.4.4 ?
SM-N910C cihazımdan Tapatalk kullanılarak gönderildi
Lel
TechGenius said:
Hi Guys i made a "Stock based" Note 4 rom for Note 2 but i need tester i have no Note 2
But i think its not giving damage on your phone
All apps are ported from note 4
i just searching rom is working fine ? , ROM have any force close ? or something
Please report bugs if you are testing !
Download : Uploading (Sorry guys bad internet connection , i will try upload tomorrow)
Click to expand...
Click to collapse
Some SS or changelog?
Sent from my SM-N910C using XDA-Developers mobile app
Rom is uploaded guys !
Download dead fix link plzz.
xress7 said:
Download dead fix link plzz.
Click to expand...
Click to collapse
Its not dead dude , but try full link https://drive.google.com/file/d/0B12W06_GZR7CMUs5SXgzVnlHVWs/view
TechGenius said:
Its not dead dude , but try full link https://drive.google.com/file/d/0B12W06_GZR7CMUs5SXgzVnlHVWs/view
Click to expand...
Click to collapse
Thx
How to flash
xress7 said:
Thx
How to flash
Click to expand...
Click to collapse
Go to twrp(or cwm) , (backup your data - system - boot - efs "optional") do factory reset and install zip
Anyone tried ?
erhan289 said:
Bro Android 4.4.4 ?
SM-N910C cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Yes
screen shots please and change logs too if possible ?
wanipravin19 said:
screen shots please and change logs too if possible ?
Click to expand...
Click to collapse
im waiting for testers
So what's the differnce between this and DN4?
Unable to start
View attachment 3824375
I dont know how to take a log. Phone booted but got stuck at samsung logo after full wipe . tried agni kernel and still rom was stuck after boot at initial samsung logo
Me too unable to start
Sent from my GT-N7100 using XDA-Developers mobile app
@TechGenius
I see a bootloader flashable in the rom -> which is it and why? Perhaps a bit risky
April Update of TWRP by LR TEAM
https://www.dropbox.com/s/mqv5f2xofn872et/TWRP-3.2.3-0402-XIAOMI_MIX3-CN-wzsx150-fastboot.7z?dl=0
Enjoy!
For Donation to LR TEAM: [email protected]
Thank you
What is LR Team? Why your TWRP is better?
Sent from my Pixel 2 XL using Tapatalk
LR Team produced the first working TWRP for the Mix 3 and have been developing it ever since.
The only problem I've ever had with it was trying to backup the /data partition on MIUI-based roms. Works fine on AOSP-based, hence I haven't updated yet, but I may do with this if it's the final.
can it installed on global rom?
flinchbeam said:
can it installed on global rom?
Click to expand...
Click to collapse
Yes
The latest version is 3.3.0-0424
You guys can download it from http://www.miui.com/thread-19749636-1-1.html
Works like a charm on my Chinese model.
brookier said:
The latest version is 3.3.0-0424
You guys can download it from http://www.miui.com/thread-19749636-1-1.html
Works like a charm on my Chinese model.
Click to expand...
Click to collapse
Really hard to download for me :/
...Baidu download...
Inviato dal mio MIX 3 utilizzando Tapatalk
BlackJack'89 said:
Really hard to download for me :/
...Baidu download...
Inviato dal mio MIX 3 utilizzando Tapatalk
Click to expand...
Click to collapse
I uploaded it to Google Drive!
https://drive.google.com/drive/folders/1u6U8e4iSyNPOqxAqFvEq9z2hu4uyWVDU?usp=sharing
brookier said:
I uploaded it to Google Drive!
https://drive.google.com/drive/folders/1u6U8e4iSyNPOqxAqFvEq9z2hu4uyWVDU?usp=sharing
Click to expand...
Click to collapse
Thank you!
I installed it over official TWRP 3.3.0 release (since I get an issue with the phone always booting to TWRP - while I can launch the OS through fastboot boot twrp.img as mentioned here )... But as with the previous LR Team release, it doesn't ask for the encryption password anymore (meaning I cannot access sdcard).
If I reflash the official version, it still works as expected, asking for decryption.
Any idea?
Nevermind, I ended up wiping data partition everything and starting over, as Wifi wasn't working anymore either (and phone calls... and probably other things I didn't notice), sticking to the official TWRP.
Encryption depends if you have a pincode for unlock your device. If you have pincode, it asks for encryption code, if you dont have pincode, it doesnt ask.
On recovery, encryption on is the defaut mode to prevent unlock pass by flashing rom, sort of safety.
new update
1. Update the latest 3.3.1 source code, adjust and optimize
2. Update the built-in root for magisk-19.2, and other built-in functions
http://www.miui.com/thread-19749636-1-1.html
BlackJack'89 said:
new update
1. Update the latest 3.3.1 source code, adjust and optimize
2. Update the built-in root for magisk-19.2, and other built-in functions
http://www.miui.com/thread-19749636-1-1.html
Click to expand...
Click to collapse
June Update on MEGA LRTeam 3.3.1
a bit old, we are waiting for the one compatible with android 10
New version for android 10
https://dropmefiles.com/hw81c
It's on chinese... Please make it clear.
ska4fun said:
It's on chinese... Please make it clear.
Click to expand...
Click to collapse
But you can choose English language?
Gesendet von meinem MI PAD 4 PLUS mit Tapatalk
Gandhi70 said:
But you can choose English language?
Gesendet von meinem MI PAD 4 PLUS mit Tapatalk
Click to expand...
Click to collapse
I don't think so.
Yes you can