Dear Members,
My friend owns a Moto G XT1033 (dual sim Indian version) and recently had the software go wrong. Now the phone boots - shows boot unlocked warning, booting animation. After the MOTO symbol, all that we get is a blank screen.
Now, things that I tried to recover the phone is as follows -
1. Booted into recovery menu - tried accessing the RECOVERY option. I get a NO COMMAND error (with the android lying down on his back)
2. Tried flashing custom recovery (both TWRP and CWM) - using fastboot option - I get "MISMATCHED PARTITION SIZE" error. I ignored that error (as read somewhere in this forum), I still get "NO COMMAND" while accessing the RECOVERY option
3. Tried to sideload stock 4.4.4 version using adb - the system pushes the rom to the phone successfully, but in couple of minutes I get "installation aborted" error.
I've done all I could with the help of other threads with no success. I would request your help to recover the phone. Apologies if I have started another duplicate thread on this issue. Please help. Thanks in advance.
AP Fastboot Flash Mode (S)
41.13 (sha07dc8e78, 2014-06-16 16:33:29)
CPU: MSM8226 CS
eMMC: 16GB Sandisk RV=06 PV=07 TY=17
DRAM: 1024MB Elpida S4 SDRAM DIE=4GB
Battery OK
Device is UNLOCKED. Status Code: 3
Connect USB data Cable
Flash the latest XT1033 Factory Firmware Image using Fastboot. If this is not successful, it would help to see a log of the flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
Firmware Images: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
lost101 said:
Flash the latest XT1033 Factory Firmware Image using Fastboot. If this is not successful, it would help to see a log of the flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
Firmware Images: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
Thanks for your reply and your time!
However, please find the error message and flash log below.
My image file - XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml
mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.025s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.359s]
finished. total time: 0.388s
mfastboot flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.095s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.116s]
finished. total time: 1.216s
mfastboot flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 0.055s]
writing 'logo'...
OKAY [ 0.037s]
finished. total time: 0.097s
mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.394s]
writing 'boot'...
OKAY [ 0.654s]
finished. total time: 1.053s
mfastboot flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.403s]
writing 'recovery'...
OKAY [ 0.659s]
finished. total time: 1.068s
mfastboot flash system system.img_sparsechunk1
target max-sparse-size: 256MB
error: cannot load 'system.img_sparsechunk1': No error
mfastboot flash system system.img_sparsechunk2
target max-sparse-size: 256MB
error: cannot load 'system.img_sparsechunk2': No error
Please help further.
billa vimal said:
mfastboot flash system system.img_sparsechunk1
target max-sparse-size: 256MB
error: cannot load 'system.img_sparsechunk1': No error
mfastboot flash system system.img_sparsechunk2
target max-sparse-size: 256MB
error: cannot load 'system.img_sparsechunk2': No error
Please help further.
Click to expand...
Click to collapse
Use the file names that actually exist on your computer - there may be dots in the name or some other minor differences. And if chunk 0 exists, start with that one.
_that said:
Use the file names that actually exist on your computer - there may be dots in the name or some other minor differences. And if chunk 0 exists, start with that one.
Click to expand...
Click to collapse
Thanks for highlighting that! I actually went by the steps listed in the tutorial and didnt notice the chunk.0! I have now followed every other step - but still the problem exists! I have attached the screenshot of the rom contents. And also the flash logs. Please let me know if I'm missing anything here.
Thanks for your time!
mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.016s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.359s]
finished. total time: 0.375s
mfastboot flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.094s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.109s]
finished. total time: 1.219s
mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.391s]
writing 'boot'...
OKAY [ 0.656s]
finished. total time: 1.047s
mfastboot flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.391s]
writing 'recovery'...
OKAY [ 0.656s]
finished. total time: 1.047s
mfastboot flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257755 KB)...
OKAY [ 9.031s]
writing 'system'...
OKAY [ 8.064s]
finished. total time: 17.110s
mfastboot flash system system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (256949 KB)...
OKAY [ 8.994s]
writing 'system'...
OKAY [ 8.234s]
finished. total time: 17.229s
mfastboot flash system system.img_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (260404 KB)...
OKAY [ 9.139s]
writing 'system'...
OKAY [ 8.235s]
finished. total time: 17.375s
mfastboot flash system system.img_sparsechunk.3
target max-sparse-size: 256MB
sending 'system' (166184 KB)...
OKAY [ 5.859s]
writing 'system'...
OKAY [ 6.453s]
finished. total time: 12.328s
mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (49376 KB)...
OKAY [ 1.766s]
writing 'modem'...
OKAY [ 0.844s]
finished. total time: 2.609s
mfastboot erase modemst1
erasing 'modemst1'...
OKAY [ -0.000s]
finished. total time: -0.000s
mfastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.016s]
finished. total time: 0.016s
mfastboot flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (103 KB)...
OKAY [ 0.078s]
writing 'fsg'...
OKAY [ 3.188s]
finished. total time: 3.266s
mfastboot erase cache
erasing 'cache'...
OKAY [ 0.016s]
finished. total time: 0.016s
Appreciate if someone can help rescue the phone. Thanks.
Dear friends, I am bumping this thread as I am still having the phone as a brick. Thanks to anyone who volunteer to help.
Related
hi guys i have ran into some problems on my MOTO G Basically im not sure what happend i was running stock 4.3 rooted, and it bootlooped randomly. me being the idiot as i am factory reset it from recovery, wiped cache etc.. but i also formatted the system in a moment of madness and have now lost my back ups.
so i tried to upgrade to 4.2.2 using cmd prompts & also tried restoring the stock firmware ( 4.3) using cmd prompts all goes well untill it reaches the system.img this is what happens
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Dan>cd C:\
C:\>flashall.bat /eu
Motorola Mobility flashall script version 1.4
Flashing Options:
- flash persist: 0
- flash userdata: 0
- erase userdata: 1
- erase cache: 0
Waiting for fastboot enumeration...
Fastboot device is ready!!
Flashing GPT and bootloader images...
Executing ".\Windows\fastboot.exe flash partition gpt.b
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.031s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.438s]
finished. total time: 0.469s
8226 HW detected...
Flashing motoboot
Executing ".\Windows\fastboot.exe flash motoboot motobo
target max-sparse-size: 256MB
sending 'motoboot' (1940 KB)...
OKAY [ 0.109s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.484s]
finished. total time: 1.594s
Flashing modem SW...
Executing ".\Windows\fastboot.exe flash modem NON-HLOS.
target max-sparse-size: 256MB
sending 'modem' (47484 KB)...
OKAY [ 2.094s]
writing 'modem'...
OKAY [ 1.250s]
finished. total time: 3.344s
Executing ".\Windows\fastboot.exe flash fsg fsg.mbn"
target max-sparse-size: 256MB
sending 'fsg' (102 KB)...
OKAY [ 0.047s]
writing 'fsg'...
OKAY [ 0.094s]
finished. total time: 0.141s
Executing ".\Windows\fastboot.exe erase modemst1"
erasing 'modemst1'...
OKAY [ 0.016s]
finished. total time: 0.016s
Executing ".\Windows\fastboot.exe erase modemst2"
erasing 'modemst2'...
OKAY [ 0.047s]
finished. total time: 0.047s
Flashing AP Images...
Executing ".\Windows\fastboot.exe flash logo logo.bin"
target max-sparse-size: 256MB
sending 'logo' (619 KB)...
OKAY [ 0.062s]
writing 'logo'...
OKAY [ 0.094s]
finished. total time: 0.156s
Executing ".\Windows\fastboot.exe flash boot boot.img"
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.484s]
writing 'boot'...
OKAY [ 0.844s]
finished. total time: 1.328s
Executing ".\Windows\fastboot.exe flash recovery recove
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.484s]
writing 'recovery'...
OKAY [ 0.844s]
finished. total time: 1.328s
Executing ".\Windows\fastboot.exe flash system system.i
target max-sparse-size: 256MB
error: cannot load 'system.img': Unknown error
.\Windows\fastboot.exe flash system system.img failed!!
anybody have any solutions has my phone is a lying brick at the moment thankyou.
Hello guys, this is my first time being officially on the forum as a user, before I was just reading and viewing information, using some of it as well. The reason I post this thread is to see if anyone can help me out or point me in the right direction of an already existing thread for my issue.
My issue is the following. A week ago I was trying to flash a new rom and by accident I deleted the system part on the advanced option on the TWRP. After that when my phone turned on a weird line starting going up and down on the screen and the phone started to work really really slow. I asked a friend and he told me to just reflash the rom, which I did but the line and slowness still appeared after that even my WIFI stopped working (when I tried to turn it on it would turn itself off immediately) I read on a thread about a similar issue and they reinstalled the firmware of the phone and it worked. obviously I tried doing it myself, I replaced the firmware to my phone used an original copy and everything works fine, except the wifi, it still does not turn on.
Can anyone help me out? Has anyone ever hear of this issue before.
And to let you all know. Me cellphones model is Motorola Moto G TX1032
Any and I mean any assistance or information provided will be very helpful.
Thank you!!
Mr.Nomo said:
Hello guys, this is my first time being officially on the forum as a user, before I was just reading and viewing information, using some of it as well. The reason I post this thread is to see if anyone can help me out or point me in the right direction of an already existing thread for my issue.
My issue is the following. A week ago I was trying to flash a new rom and by accident I deleted the system part on the advanced option on the TWRP. After that when my phone turned on a weird line starting going up and down on the screen and the phone started to work really really slow. I asked a friend and he told me to just reflash the rom, which I did but the line and slowness still appeared after that even my WIFI stopped working (when I tried to turn it on it would turn itself off immediately) I read on a thread about a similar issue and they reinstalled the firmware of the phone and it worked. obviously I tried doing it myself, I replaced the firmware to my phone used an original copy and everything works fine, except the wifi, it still does not turn on.
Can anyone help me out? Has anyone ever hear of this issue before.
And to let you all know. Me cellphones model is Motorola Moto G TX1032
Any and I mean any assistance or information provided will be very helpful.
Thank you!!
Click to expand...
Click to collapse
Did you use a fastboot firmware image? If so what commands did you try?
Did u flash the modem,boot and radio correctly?
lost101 said:
Did you use a fastboot firmware image? If so what commands did you try?
Click to expand...
Click to collapse
What I used was "US_retail_XT1032_KXB21.14-L1.32_CFC.xml" its a zip file, I copied the contents on this to a folder where I had the adb tools and the commands I used where:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
It's would be helpful if you could provide an actual log of using these commands. Fastboot is not user friendly, and it can be the case you think a command has been successful - when it has not.
Log
lost101 said:
It's would be helpful if you could provide an actual log of using these commands. Fastboot is not user friendly, and it can be the case you think a command has been successful - when it has not.
Click to expand...
Click to collapse
Here is the log of the command process, I had to switch commands and firmware because the rest were giving me more problems aside of the wifi, this is the brazilian firmware 5.0.2 :
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash
partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.025s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.370s]
finished. total time: 0.399s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot reboo
t-bootloader
rebooting into bootloader...
OKAY [ 0.002s]
finished. total time: 0.003s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash
motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.091s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.232s]
finished. total time: 1.326s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash
logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 0.036s]
writing 'logo'...
OKAY [ 0.084s]
finished. total time: 0.123s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash
boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.391s]
writing 'boot'...
OKAY [ 0.760s]
finished. total time: 1.156s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash
recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.372s]
writing 'recovery'...
OKAY [ 0.750s]
finished. total time: 1.125s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash
system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257883 KB)...
OKAY [ 8.454s]
writing 'system'...
OKAY [ 10.936s]
finished. total time: 19.394s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash
system system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (256754 KB)...
OKAY [ 8.456s]
writing 'system'...
OKAY [ 11.241s]
finished. total time: 19.701s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash
system system.img_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (260090 KB)...
OKAY [ 8.573s]
writing 'system'...
OKAY [ 11.058s]
finished. total time: 19.642s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash
system system.img_sparsechunk.3
target max-sparse-size: 256MB
sending 'system' (165316 KB)...
OKAY [ 5.463s]
writing 'system'...
OKAY [ 7.930s]
finished. total time: 13.401s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash
modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (49356 KB)...
OKAY [ 1.694s]
writing 'modem'...
OKAY [ 1.455s]
finished. total time: 3.154s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot erase
modemst1
erasing 'modemst1'...
OKAY [ 0.023s]
finished. total time: 0.025s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot erase
modemst2
erasing 'modemst2'...
OKAY [ 0.022s]
finished. total time: 0.024s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash
fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (102 KB)...
OKAY [ 0.072s]
writing 'fsg'...
OKAY [ 5.602s]
finished. total time: 5.679s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot erase
cache
erasing 'cache'...
OKAY [ 0.359s]
finished. total time: 0.361s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot erase
userdata
erasing 'userdata'...
OKAY [ 3.168s]
finished. total time: 3.172s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot reboo
t
rebooting...
finished. total time: 0.002s
C:\Users\J\Desktop\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>
Now this firmware works fine and all but I still have the issue with the wifi, I have been reading about replacing a file on the /persist folder, and I have done so multiple times, and the issue still remains
Could you try flashing the GPE 5.1 Firmware Image: http://forum.xda-developers.com/showpost.php?p=59930345&postcount=610
Skip the following command for your own safety: mfastboot flash motoboot motoboot.img
Same?
lost101 said:
Could you try flashing the GPE 5.1 Firmware Image: http://forum.xda-developers.com/showpost.php?p=59930345&postcount=610
Skip the following command for your own safety: mfastboot flash motoboot motoboot.img
Click to expand...
Click to collapse
I did the process here is the log:
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.367s]
writing 'boot'...
OKAY [ 0.712s]
finished. total time: 1.092s
on device appeared: hab check failed for boot
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.384s]
writing 'recovery'...
OKAY [ 0.702s]
finished. total time: 1.092s
on device appeared: hab check failed for recovery
Complete log:
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t partition gpt.bin
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format <partition> format a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache
-P enable parallel loading for multi-fla
sh if
there is no enough memory on host to
load
whole image
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default:
2048
-S <size>[K|M|G] automatically sparse files greater th
an
size. 0 to disable
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.028s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.318s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t reboot bootloader
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format <partition> format a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache
-P enable parallel loading for multi-fla
sh if
there is no enough memory on host to
load
whole image
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default:
2048
-S <size>[K|M|G] automatically sparse files greater th
an
size. 0 to disable
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t reboot-bootloader
rebooting into bootloader...
OKAY [ 0.003s]
finished. total time: 0.004s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (76 KB)...
OKAY [ 0.032s]
writing 'logo'...
OKAY [ 0.081s]
finished. total time: 0.118s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.367s]
writing 'boot'...
OKAY [ 0.712s]
finished. total time: 1.092s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.384s]
writing 'recovery'...
OKAY [ 0.702s]
finished. total time: 1.092s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257288 KB)...
OKAY [ 8.507s]
writing 'system'...
OKAY [ 11.266s]
finished. total time: 19.776s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t flash system system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (260812 KB)...
OKAY [ 8.591s]
writing 'system'...
OKAY [ 10.560s]
finished. total time: 19.154s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t flash system system.img_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (262141 KB)...
OKAY [ 8.624s]
writing 'system'...
OKAY [ 12.751s]
finished. total time: 21.378s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t flash system system.img_sparsechunk.3
target max-sparse-size: 256MB
sending 'system' (18680 KB)...
OKAY [ 0.693s]
writing 'system'...
OKAY [ 0.783s]
finished. total time: 1.482s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (49368 KB)...
OKAY [ 1.677s]
writing 'modem'...
OKAY [ 1.292s]
finished. total time: 2.975s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t erase modemst1
erasing 'modemst1'...
OKAY [ 0.023s]
finished. total time: 0.025s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t erase modemst2
erasing 'modemst2'...
OKAY [ 0.022s]
finished. total time: 0.024s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (708 KB)...
OKAY [ 0.110s]
writing 'fsg'...
OKAY [ 5.614s]
finished. total time: 5.729s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t erase cache
erasing 'cache'...
OKAY [ 0.344s]
finished. total time: 0.345s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t erase userdata
erasing 'userdata'...
OKAY [ 2.976s]
finished. total time: 2.979s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>mfastboo
t reboot
rebooting...
finished. total time: 0.002s
C:\Users\J\Downloads\Moto G\Firmware\GPE_5.1_XT1032_LMY47M.M001_CFC.xml>
I also included what I believe are errors, if you call it like that which are detailed at the beginning. And now when I turn the wifi on, it turns "on" but no networks are recognized ( I have one at home ) and then when the screen locks or I go back, it will appear as off.
Update
After installing this firmware and installing a file explorer with root permission, I went to /persist to modify the WCNSS file, placing a 0 on it, afterwards tried the WIFI and got my hopes up because it recognized my WIFI and it even displayed a MAC Address which I copied. After trying to connect to my wifi...it stopped working and is back to square one.
@Mr.Nomo - I'll do some more research this evening. Is everything else working for you? Calls / data etc.
UPDATE: Sometimes flashing a CyanogenMOD based custom ROM can get WiFi working again. WiFi in XPerience ROM is different again and might be worth a try: http://forum.xda-developers.com/moto-g/orig-development/rom-xperience-9-0-0-t2952466
lost101 said:
@Mr.Nomo - I'll do some more research this evening. Is everything else working for you? Calls / data etc.
UPDATE: Sometimes flashing a CyanogenMOD based custom ROM can get WiFi working again. WiFi in XPerience ROM is different again and might be worth a try: http://forum.xda-developers.com/moto-g/orig-development/rom-xperience-9-0-0-t2952466
Click to expand...
Click to collapse
Yes! Everything else is working absolutely fine, calls, data, texting, everyhing else is awesome. I tried flashing a CyanoGen rom before, it started giving me issues with the playstore and with the UI, but will definitely try it out and update you with the results.
Thank you very much for all your help. :good:
Update on the XPerience Rom
Flashed properly, no errors and aside from it being a little slow at startup everything else works. Except the WiFi Tried modyfing the WCNSS file, no success with that either. One question, if I were to delete the folder /persist and all its contents, how would that affect the phone?
Mr.Nomo said:
Flashed properly, no errors and aside from it being a little slow at startup everything else works. Except the WiFi Tried modyfing the WCNSS file, no success with that either. One question, if I were to delete the folder /persist and all its contents, how would that affect the phone?
Click to expand...
Click to collapse
I don't know what would happen, but I can say that there are some partitions on Moto G that are unique to each handset. For example, if deleting the contents of that partition / folder caused you to loose IMEI - it might be impossible to undo. Without an IMEI you could no longer make calls.
Update on the XPerience Rom #2
It seems the rest of the rom is working fine up to this point, the only problem that I've encountered aside from the WIFI is the messaging app that comes included on the rom stops working whenever I try to reply to a message or create a new one. But I think I will use hangouts for that issue, by the way if I didnt thank already for the information regarding the possible causes of deleting the /persist file...I thank you again. :good:
My phone just suddenly get bricked, I'm do not do anything before,not root ,not unlock bootloader ,not flash third-party roms.
I'm only update from ota (from 4.4 to 5.0 and 5.0 to 5.1), just the offical method to update.
now,i come here to find the way and get my phone back .
the situation now is unlocked bootloader (bootloader version :41.1A)
and try to flash stock rom XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml.zip
i just follow the guide in forum ,but get a trouble like that:
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash pa
rtition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.032s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.333s]
finished. total time: 0.375s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash mo
toboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.109s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.112s]
finished. total time: 1.232s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash lo
go logo.bin
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 0.062s]
writing 'logo'...
OKAY [ 0.101s]
finished. total time: 0.173s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash bo
ot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.379s]
writing 'boot'...
OKAY [ 0.776s]
finished. total time: 1.166s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash re
covery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.392s]
writing 'recovery'...
OKAY [ 0.767s]
finished. total time: 1.171s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash sy
stem system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257755 KB)...
OKAY [ 8.318s]
writing 'system'...
OKAY [ 12.417s]
finished. total time: 20.747s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash sy
stem system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (256949 KB)...
OKAY [ 8.258s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 29.086s
C:\Program Files (x86)\Android\android-sdk\platform-tools>
I have try many times but still cant flash the sysem system.img_sparsechunk.1,
but i can flash the part system.img_sparsechunk.0
Does any one know what is my problem?(or my phone is already dead.)
PS: I'm sorry about that my english is not good,if anything wrong or can not understanding,please ask me.
thanks everyone.
Maybe that sparsechunk did not extract fully from the zip. Re-extract, or download the entire zip again.
lost101 said:
Maybe that sparsechunk did not extract fully from the zip. Re-extract, or download the entire zip again.
Click to expand...
Click to collapse
First, thanks to your suggestion.
I just re-download the roms from the different websites
then use 7 zip to extract the both file and try again ,still get the same result as i say that on the topic.
BY the way ,thank you for your suggestion.
Try an 'external' factory reset via Stock Recovery:
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/97329/p/30,6720,9050
lost101 said:
Try an 'external' factory reset via Stock Recovery:
motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/97329/p/30,6720,9050
Click to expand...
Click to collapse
thanks your suggestion
i just follow the guide of the website,but i get the problem in step 4, i can see the Android figure lying on his back,but my screen continue twinkling ,after i press and hold the Power button then press and release the Volume Up button, the phone come back to the fastboot screen.
Is that root the phone can get help?
More: I'm use the 16GB version xt1033 ,is that wrong gpt.bin in rom?
tom0079 said:
i just follow the guide of the website,but i get the problem in step 4, i can see the Android figure lying on his back,but my screen continue twinkling ,after i press and hold the Power button then press and release the Volume Up button, the phone come back to the fastboot screen.
Click to expand...
Click to collapse
Keep trying, you should be able to enter recovery mode. The instructions are press and hold Vol up, then tap Power button - not what you describe.
lost101 said:
Keep trying, you should be able to enter recovery mode. The instructions are press and hold Vol up, then tap Power button - not what you describe.
Click to expand...
Click to collapse
After that ,i try several methods, and do some stupid things and relock the bootloader,
i can't flash any part of the roms now,is there any way to unlock the bootloader again?
(P.S. the status in fastboot mode still show up unlock)
mfastboot oem unlock
lost101 said:
mfastboot oem unlock
Click to expand...
Click to collapse
It's not work!
http://forum.xda-developers.com/moto-g/help/guide-root-xt1032-xt1033-moto-g-running-t2965507
i have done what in the link, so get trouble
New 5.1 Factory Firmware Images are now available here: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
For now, the only XT1033 image you can use is: XT1033_FALCON_RETBR_DS_5.1_LPBS23.13-56-2_cid12 (you can change language to english during setup)
I would try flashing that firmware image via mfastboot. When the new XT1033 Asia firmware image becomes available, you can change to that if you want.
lost101 said:
New 5.1 Factory Firmware Images are now available here: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
For now, the only XT1033 image you can use is: XT1033_FALCON_RETBR_DS_5.1_LPBS23.13-56-2_cid12 (you can change language to english during setup)
I would try flashing that firmware image via mfastboot. When the new XT1033 Asia firmware image becomes available, you can change to that if you want.
Click to expand...
Click to collapse
thanks for your reply, i had tried the rom you provided to me, it still get the same result,all the steps are showing the result "failure".
Can you tell me that have big chance to make my phone return normal ?
If not, that's the time for me to give up.
tom0079 said:
thanks for your reply, i had tried the rom you provided to me, it still get the same result,all the steps are showing the result "failure".
Can you tell me that have big chance to make my phone return normal ?
If not, that's the time for me to give up.
Click to expand...
Click to collapse
Show me the log from command prompt when flashing the firmware image.
I have some issue with my Moto G XT1033
tom0079 said:
My phone just suddenly get bricked, I'm do not do anything before,not root ,not unlock bootloader ,not flash third-party roms.
I'm only update from ota (from 4.4 to 5.0 and 5.0 to 5.1), just the offical method to update.
now,i come here to find the way and get my phone back .
the situation now is unlocked bootloader (bootloader version :41.1A)
and try to flash stock rom XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml.zip
i just follow the guide in forum ,but get a trouble like that:
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash pa
rtition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.032s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.333s]
finished. total time: 0.375s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash mo
toboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.109s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.112s]
finished. total time: 1.232s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash lo
go logo.bin
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 0.062s]
writing 'logo'...
OKAY [ 0.101s]
finished. total time: 0.173s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash bo
ot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.379s]
writing 'boot'...
OKAY [ 0.776s]
finished. total time: 1.166s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash re
covery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.392s]
writing 'recovery'...
OKAY [ 0.767s]
finished. total time: 1.171s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash sy
stem system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257755 KB)...
OKAY [ 8.318s]
writing 'system'...
OKAY [ 12.417s]
finished. total time: 20.747s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash sy
stem system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (256949 KB)...
OKAY [ 8.258s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 29.086s
C:\Program Files (x86)\Android\android-sdk\platform-tools>
I have try many times but still cant flash the sysem system.img_sparsechunk.1,
but i can flash the part system.img_sparsechunk.0
Does any one know what is my problem?(or my phone is already dead.)
PS: I'm sorry about that my english is not good,if anything wrong or can not understanding,please ask me.
thanks everyone.
Click to expand...
Click to collapse
Getting some "Preflash validiation error" on my Moto XT1033 while flashing gpt.bin and motoboot.img and I'm also unable to factory reset and wipe dalvik cache and also I'm unablle to flash TWRP or any other custom recovery and unable to re-lock my bootloader Showing some Partition error....Help me plz....
MY device is bricked
Hi,
I have a problem whit my device after a flash a rom the device is stuck on bootloop and boot only to the twrp recovery
i tried to flash the stock rom and no seccss the device is still boot to the stock recovery
what shold i do :\ ?
my device i x1032 google play edition
Which ROM are you flashing?
While in fastboot mode enter :
mfastboot oem fb_mode_clear
That will solve that boot to recovery issue.
I do not know if it matters
When I tried to fix the problem so I changed the File system in the twrp
WIPE-ADVANCED WIPE- REPAIR OR CHANGE FILE SYSTEM
cache is in ext4
date is in f2fs
system is in ext4
any help ?
the problem is still exists
upload a video of the problem
https://www.youtube.com/watch?v=AoxwrfIEZQw
blior32017 said:
any help ?
the problem is still exists
Click to expand...
Click to collapse
Flash the latest XT1032 Factory Firmware Image using mFastboot. If this is not successful, it would help to see a log of the flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
mFastboot download: https://www.androidfilehost.com/?fid=24052804347778493
Firmware Images: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
lost101 said:
Flash the latest XT1032 Factory Firmware Image using mFastboot. If this is not successful, it would help to see a log of the flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
mFastboot download: https://www.androidfilehost.com/?fid=24052804347778493
Firmware Images: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
this is the log
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.031s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.328s
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.094s]
writing 'motoboot'...
(bootloader) Motoboot: Preflash validation for tz
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.344s
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (76 KB)...
OKAY [ 0.063s]
writing 'logo'...
OKAY [ 0.094s]
finished. total time: 0.156s
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.350s]
writing 'boot'...
OKAY [ 0.766s]
finished. total time: 1.116s
D:\minimal_adb_fastboot_1.4.1_portable>
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.359s]
writing 'recovery'...
OKAY [ 0.771s]
finished. total time: 1.130s
D:\minimal_adb_fastboot_1.4.1_portable>
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257288 KB)...
OKAY [ 8.092s]
writing 'system'...
OKAY [ 12.700s]
finished. total time: 20.791s
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot flash system system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (260792 KB)...
OKAY [ 8.192s]
writing 'system'...
OKAY [ 11.742s]
finished. total time: 19.949s
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot flash system system.img_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (262141 KB)...
OKAY [ 8.243s]
writing 'system'...
OKAY [ 13.915s]
finished. total time: 22.158s
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot flash system system.img_sparsechunk.3
target max-sparse-size: 256MB
sending 'system' (18704 KB)...
OKAY [ 0.628s]
writing 'system'...
OKAY [ 0.853s]
finished. total time: 1.512s
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (49368 KB)...
OKAY [ 1.605s]
writing 'modem'...
OKAY [ 1.459s]
finished. total time: 3.064s
D:\minimal_adb_fastboot_1.4.1_portable>
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.016s]
finished. total time: 0.016s
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.063s]
finished. total time: 0.063s
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (708 KB)...
OKAY [ 0.109s]
writing 'fsg'...
OKAY [ 5.602s]
finished. total time: 5.712s
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot erase cache
erasing 'cache'...
OKAY [ 0.359s]
finished. total time: 0.359s
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot erase userdata
erasing 'userdata'...
OKAY [ 5.993s]
finished. total time: 5.993s
D:\minimal_adb_fastboot_1.4.1_portable>mfastboot reboot
rebooting...
finished. total time: 0.016s
D:\minimal_adb_fastboot_1.4.1_portable>
@blior32017 - Which firmware image - state the zip filename - did you flash?
lost101 said:
@blior32017 - Which firmware image - state the zip filename - did you flash?
Click to expand...
Click to collapse
I have the GPE version so I flash "GPE_5.1_XT1032_LMY47M.M005"
blior32017 said:
I have the GPE version so I flash "GPE_5.1_XT1032_LMY47M.M005"
Click to expand...
Click to collapse
Try the following firmware image instead:
Retail US - XT1032_FALCON_RETUGLB_5.1_LPBS23.13-58-2_cid9 (Newer Build)
Hello
I really hopes one of you brilliand guys can help me. I'm at a loss (sorry in advance for bad english).
I have a xt1039 with an unlocked BL 41.1A which I can't get back to stock or flash any other ROM.
In mfastboot, my phone is recognized as TA4750I1SK, and the device is UNLOCKED and my CID is 7.
I tried flashing different stock version from here
https://firmware.center/firmware/Motorola/Moto%20G%20%281st%20gen-2013%29/Stock/XT1039/"]https://firmware.center/firmware/Motorola/Moto%20G%20%281st%20gen-2013%29/Stock/XT1039/
trying both 4.4.4 and 5.1 but without success:
C:\Users\Zhe Wang\Downloads\mfastboot-v2>mfastboot.exe flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.090s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.430s
(version downgraded for primary gpt)
C:\Users\Zhe Wang\Downloads\mfastboot-v2>mfastboot.exe flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.170s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.020s]
finished. total time: 1.200s
C:\Users\Zhe Wang\Downloads\mfastboot-v2>mfastboot.exe flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 0.100s]
writing 'logo'...
OKAY [ 0.090s]
finished. total time: 0.190s
C:\Users\Zhe Wang\Downloads\mfastboot-v2>mfastboot.exe flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.520s]
writing 'boot'...
OKAY [ 0.810s]
finished. total time: 1.330s
(This sometimes fails as well, preflash validation, and on mobile says "version downgraded for boot")
C:\Users\Zhe Wang\Downloads\mfastboot-v2>mfastboot.exe flash recovery recovery.i
mg
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.520s]
writing 'recovery'...
OKAY [ 0.810s]
finished. total time: 1.330s
C:\Users\Zhe Wang\Downloads\mfastboot-v2>mfastboot.exe flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257451 KB)...
OKAY [ 10.715s]
writing 'system'...
OKAY [ 13.060s]
finished. total time: 23.776s
C:\Users\Zhe Wang\Downloads\mfastboot-v2>mfastboot.exe flash system system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (257661 KB)...
OKAY [ 10.383s]
writing 'system'...
OKAY [ 12.192s]
finished. total time: 22.580s
C:\Users\Zhe Wang\Downloads\mfastboot-v2>mfastboot.exe flash system system.img_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (261552 KB)...
OKAY [ 10.710s]
writing 'system'...
OKAY [ 17.881s]
finished. total time: 28.606s
C:\Users\Zhe Wang\Downloads\mfastboot-v2>mfastboot.exe flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (60232 KB)...
OKAY [ 2.527s]
writing 'modem'...
OKAY [ 2.090s]
finished. total time: 4.627s
C:\Users\Zhe Wang\Downloads\mfastboot-v2>mfastboot.exe erase modemst1
erasing 'modemst1'...
OKAY [ 0.030s]
finished. total time: 0.030s
C:\Users\Zhe Wang\Downloads\mfastboot-v2>mfastboot.exe erase modemst2
erasing 'modemst2'...
OKAY [ 0.064s]
finished. total time: 0.066s
C:\Users\Zhe Wang\Downloads\mfastboot-v2>mfastboot.exe flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (517 KB)...
OKAY [ 0.080s]
writing 'fsg'...
OKAY [ 5.272s]
finished. total time: 5.362s
C:\Users\Zhe Wang\Downloads\mfastboot-v2>mfastboot.exe erase cache
erasing 'cache'...
OKAY [ 0.140s]
finished. total time: 0.140s
C:\Users\Zhe Wang\Downloads\mfastboot-v2>mfastboot.exe erase userdata
erasing 'userdata'...
OKAY [ 0.440s]
finished. total time: 0.440s
I managed to flash twrp, but the phone will hang on Bootloader logo when rebooting, and I don't know what to do next.
Any good ideas?
visit here https://forum.xda-developers.com/showthread.php?t=2317790
and download version 1.4.2
then visit this https://forum.xda-developers.com/attachment.php?attachmentid=3476163&d=1442444179 (direct download link for mfastboot)
now copy mfastboot.exe to adb folder (created from version 1.4.2 .exe)
and try to install 5.1 lollipop stock rom with mfastboot commands thats it everything will works fine
dont download adb file from google website always use version 1.4.2
enjoy
Thank you for your reply. That made no difference. Same error messages. Also when I reboot in the end, it still shows unlocked bootloader message, continues straight to periodically blinking the "no command" and then just hangs.
I tried to flash XT1039_PEREGRINE_RETEU_5.1_LPB23.13-17_cid7_CFC.xml.
Also, when I go to twrp and try to make a wipe, it shows 'unable to mount /data' and 'unable to mount internal storage'.
Any new ideas?
SunilSuni said:
visit here https://forum.xda-developers.com/showthread.php?t=2317790
and download version 1.4.2
then visit this https://forum.xda-developers.com/attachment.php?attachmentid=3476163&d=1442444179 (direct download link for mfastboot)
now copy mfastboot.exe to adb folder (created from version 1.4.2 .exe)
and try to install 5.1 lollipop stock rom with mfastboot commands thats it everything will works fine
dont download adb file from google website always use version 1.4.2
enjoy
Click to expand...
Click to collapse
Powerleech said:
Hello
I really hopes one of you brilliand guys can help me. I'm at a loss (sorry in advance for bad english).
I have a xt1039 with an unlocked BL 41.1A which I can't get back to stock or flash any other ROM.
In mfastboot, my phone is recognized as TA4750I1SK, and the device is UNLOCKED and my CID is 7.
I tried flashing different stock version from here
https://firmware.center/firmware/Motorola/Moto%20G%20%281st%20gen-2013%29/Stock/XT1039/"]https://firmware.center/firmware/Motorola/Moto%20G%20%281st%20gen-2013%29/Stock/XT1039/
trying both 4.4.4 and 5.1 but without success:
I managed to flash twrp, but the phone will hang on Bootloader logo when rebooting, and I don't know what to do next.
Any good ideas?
Click to expand...
Click to collapse
Flashing twrp 3.1 or high in bootloader .
Wipe "system" "data" and "cache" in twrp .
Dont flash "partition" and "motoboot" when you flashing stock firmware .