Database Info

battery only chargers to 95% ?

Is this normal. I did try and do a search in my defence.

Yes. It is like that by design. It stops charging at around 95-98%. Its to prevent you from overcharging the battery.
Sent from my Nexus S using XDA App

This is a known issue. You can try and reset battery stats in cwm when your battery is charged and/or emptied. It works for some and not for others. I haven't noticed my battery lasting any less when my battery doesn't "charge" past 97%

There have been some discussion on this. I get about 97% myself. From what I've read you may get full charge if you let it drain all the way. I don't do that myself. Very happy with battery life as is.

I used to get 100% before I switched to the Vegan rom.
Sent from my G-Tablet running Vega-Nb5.1

Mrhorology said:
Is this normal. I did try and do a search in my defence.
Click to expand...
Click to collapse
Either let it drain until it shuts off a few times and then charge it all the way up or if that doesn't work, use CWM to delete the battery stats when it's at 95% (full, with a GREEN light - not charging, with a red light) and then let it drain until it shuts off on it's own.
I did this a long time ago (delete the stats) and it's been perfect since. Charges to 100% and does indeed show battery at almost empty before it shuts off.
Good Luck.

Still no go here but it can get tom 96%... lol

I am sitting a 98% with VEGAn.

I am now having an issue where u can use the device, then I turn it off, and
turn it on the next morning and see about 5 to 10% of my battery was drained.

Confirmed Fix
Confirmed fix for me on Vegan 5.1. Letting battery drain down to zero and shutoff the tablet... reached 100% on next charge. Now the indicator charges to 100% every time.

tried this and still no luck . still get to 95-6% bugger

Vegan here..this is how I fixed it:
1) Drain it till it shuts off, try restarting it a few time to make sure its dead.
2) Once dead, plug it in, boot into clockworkx, and reset battery status (do this quickly)
3) restart, and leave plugged in idling till fully charged
4) use and enjoy a accurate battery level!!
-Red

Mrhorology said:
I am now having an issue where u can use the device, then I turn it off, and
turn it on the next morning and see about 5 to 10% of my battery was drained.
Click to expand...
Click to collapse
You have to remember that in order to install some apps out there, you have to give them permission to use the internet and to interact with your device autonomously. I have found a few apps that were pulling my tablet out of sleep mode and turning on the wireless to download ads or other updates, and that (along with the length of time to shut back down) was affecting my battery life.
I would say to go back and review what you've installed, and to also check your screen timeout settings. Just doing that saved me quite a bit of overnight battery loss.
BigJohn

[Q] Battery Inconsistencies?

Hey guys, is anyone else here experiencing the battery level going up when you restart the phone?
If my battery is at 70%, and I restart it, it'll be at 76% or even higher and remain that way for quite a while (remains a consistantly drain, not a single major drain in a short period of time)
This is something that's been happening since I was stock (Retail device from T-mobile store on launch date)
Here's some info:
-S-OFF using Revolutionary, and then later upgraded to 4.0.0.9 via terminal emulator
-Rooted stock (no rom uploaded)
-1900 mha Anker battery
-Battery stats wiped
-UncleSpoon's battery icon mod
even after all that, it'll still do it. So is it just me, or is everyone else experiencing this?

Yes, you have to re-calibrate your battery stats.
No, the CWM menu option to wipe battery stats is not right, for some reason.
Go get this free app: Battery Calibration
Charge your battery all the way up and let it sit charging for a few minutes after you see the light turn green (while turned on and booted up)
After it's been green for a few minutes, open this app and click the big "calibrate" button, and then un-plug it from the charger.
Let it run down until it turns itself off, without plugging it in. This means no usb to the computer, either - and don't turn it off manually.
After it turns itself off from lack of juice, plug it in (wait about 30 seconds) and then turn it back on. If you turn it on too quickly weird things may happen, depends on how depleted the battery is. (usually there is 1 or 2 % left so it's ok)
Leave it plugged in and turned on until fully charged. After that, you can feel free to play with it, but you should run it up and down a few more times without charging in-between. The first one is critical to do this way, though, or you are just wasting your time.
You MUST be rooted, or it will not work. (said for others who may need this info)
Tip to drain battery - screen brightness all the way up, screen to not turn off, and turn the flashlight app on. Leave it sit for a few hours.
Tip to charge quickly while on: Turn all wireless and data communication off, tap power button to turn screen off (keeping phone on)
Good luck, it'll solve the problem though.

I used battery calibration to wipe my battery stats (I did it in recovery on my 3G Slide, so I'm aware of that alternative method)..
I've let my stock battery get to 0% but that was pre-root.
After reading all the charging problems with the CWM, I was a bit afraid to attempt the 0% drain on the new Anker.
Are you running 4.0.0.9, and does it charge fine? I'd hate to deplete an Anker since I have no external battery charger.

RazoE said:
I used battery calibration to wipe my battery stats (I did it in recovery on my 3G Slide, so I'm aware of that alternative method)..
I've let my stock battery get to 0% but that was pre-root.
After reading all the charging problems with the CWM, I was a bit afraid to attempt the 0% drain on the new Anker.
Are you running 4.0.0.9, and does it charge fine? I'd hate to deplete an Anker since I have no external battery charger.
Click to expand...
Click to collapse
Removing the stats only doesn't calibrate the battery, check the calibration guide in my sig, for a correct method that works for any android device.
Read this too
http://forum.xda-developers.com/showthread.php?t=1168036

Ace42 said:
Removing the stats only doesn't calibrate the battery, check the calibration guide in my sig, for a correct method that works for any android device.
Read this too
http://forum.xda-developers.com/showthread.php?t=1168036
Click to expand...
Click to collapse
Seriously, that's a good read.

I agree.
What I recommended was better then just wiping battery stats with CWM, but nowhere near as good as what Ace42 linked us up to.
I'd recommend reading those threads and doing that instead, I am more then happy to be corrected and shown a better way.
(FYI - I depleted a stock battery completely, both in CWM 4.0.0.8 and 4.0.0.9 to test the charging issue. You will always be able to charge it in the phone, even if you bring it completely to dead.
The idea that you can't is a myth, and was a concern until it was proven not to be true.)

Battery problem?

I don't know if it's the ROM itself, the battery or any other problem but every time my phone dies & I put it on the charge for a couple of minutes, I turn it back on & the battery level jumps up about 30%. What should I do about this?
i.e. I'm not running on the stock ROM.

It might have to do with the Sensation's issue with reporting battery levels accurately--sort of like how your phone stays at 100% for several hours before finally dropping down.

Is it a stock battery or large capicity version, if the larger version there is an issue with some roms or phones recognising the battery correctly

It's the stock battery that came with the phone...do I have to calibrate the battery?

One thing you could try is charging the battery to 100%, then booting into clockworkmod recovery, go to advanced, and click wipe battery stats. Then once the phone boots just unplug it and let it drain from normal use, and charge it to a hundred another 2-3 times and that should get the battery back on track. I did this after changing roms and it worked for me

may some of the wipe battery options can help you

Battery/Phone Shutting Down

Recently had to replace battery.
Phone was shutting almost immediately after it was disconnected from charger. Charging status when not switched on showed the battery kinda going in reverse. Phone was really odd as it would suggest the battery had 100% charge and then within minutes of disconnecting it was shutting down.
I tried a factory reset/refresh with no change. So I ordered a Genuine replacement battery off flea bay and installed that last Thursday.
Initially phone seemed ok, then wen a bit weird and shut down even though charge was like at 70% or so. Wouldn't restart until plugged in and then in shutdown mode the battery/charging indicator would show 0% and then very quickly showed 70%. Good bit though was it was going up and not down like before.
Fully charged phone overnight. It then seemed really good and lasted until Tuesday with 66% charge still showing. I had not installed FB or Twitter which made a huge difference. Then yesterday it just shutdown again. When plugged in showed 0%, within minutes back to 70% and then charged to 100% in the space of an hour or so.
So I am looking for any advice. Is this just calibration issues that the phone needs to get past. Is it possible the phone has corruption int he ROM.
I appreciate it might be a hardware fault but seems weird that the replacement battery is clearly showing a big improvement suggesting battery was EOL after 2 years use.
TIA
G

GougeM said:
Recently had to replace battery.
Phone was shutting almost immediately after it was disconnected from charger. Charging status when not switched on showed the battery kinda going in reverse. Phone was really odd as it would suggest the battery had 100% charge and then within minutes of disconnecting it was shutting down.
I tried a factory reset/refresh with no change. So I ordered a Genuine replacement battery off flea bay and installed that last Thursday.
Initially phone seemed ok, then wen a bit weird and shut down even though charge was like at 70% or so. Wouldn't restart until plugged in and then in shutdown mode the battery/charging indicator would show 0% and then very quickly showed 70%. Good bit though was it was going up and not down like before.
Fully charged phone overnight. It then seemed really good and lasted until Tuesday with 66% charge still showing. I had not installed FB or Twitter which made a huge difference. Then yesterday it just shutdown again. When plugged in showed 0%, within minutes back to 70% and then charged to 100% in the space of an hour or so.
So I am looking for any advice. Is this just calibration issues that the phone needs to get past. Is it possible the phone has corruption int he ROM.
I appreciate it might be a hardware fault but seems weird that the replacement battery is clearly showing a big improvement suggesting battery was EOL after 2 years use.
TIA
G
Click to expand...
Click to collapse
Same problem here i will try to install the oficial rom of xt890 if works i back here if not i don't know what to do

Sooo............issue is still present. Odd thing which I am unable to confirm, due to rnadomness of shutdowns, it that I think it is slowly learning the state of the battery as it originally was shutting down at 70% after 2-3 days on standby. then 66% hen 56%. I did a clear cache partition and a fresh install but still the issue was present.
Clearly the new battery is lasting longer than the old one, just the phone does not seem to know to reduce the charge indicator all the way to 0%.
Anyone any idea why this might be happening.
TIA
G

Just to add i'm having the same problem.
Symptoms started last week running the stock kitkat rom so i ordered and a fitted a new battery. Initially everything looked good phone said 100% left it over night and noticed it had shut off when i came back to it. Plugged it in to the charger and it said 0% so i charged back to 100%, booted up android and almost immediately it begins discharging rapidly, i would say within 15 minutes its back down to 0%.. I've done this a few times now even left it on charge overnight for 8 hours but its still discharging rapidly everytime. The craziest thing is even if it says 0% in android i can still boot in to recovery and flash away so clearly there is charge in the battery its just android thats out of sync.
What i've tried so far:
Different wall chargers/USB leads/Outlets
Wiped everything in TWRP and flashed CM11
Factory Reset several times
Various battery calibration apps
My next step is going to be trying RSD to flash the stock ROM but beyond that i dont know what to do.

I'm experiencing EXACTLY THE SAME ISSUE with my Razr i, replaced the battery and it's still discharging very fast

Eventually managed to resolve my new battery issue simply by fully charging and discharging several times. It started to hold charge after the 7th charge and after several more discharges it's now up to full capacity.

Can't calibrate new battery

Hello.
Recently (~one+ month ago), I replaced the battery of my OnePlus.
The problem is that I can not find any way to calibrate it. I have tried the "manual method" (fully drain then charge, then fully drain again and charge again e.t.c.) many times. I even tried to use some applications (that I really do not trust them for their reliability, but...).
Today, I have found some time and reinstalled the phone's OS (I am using Ressurection Remix - latest build). Nothing changed.
Here's the problem, with some concepts as examples:
I charge the battery until it gets to 100%. I use the phone for example till it gets to 60% (the drain is NOT quick. It needs some time till I get to that point). Then, if I restart the phone two (2) times, I get again 95-99% of battery. Then again, I use the phone till it gets to, for example, 40%. I twice reboot it again. ~90±%! If I do not reboot it twice, the battery indicator will not change. Or it will just lose 1% percent (for example, if I reboot one time when the phone is at 60%, I may get 59% when the phone will power up).
I charge the phone until it gets to 100%. I let the phone drain out the whole battery (0%). I boot it up again. No, the battery is still alive and it may give me around 70-90% (I am not so sure about those numbers, but the idea is that the phone can still operate - there is enough juice for the phone to work).
Any ideas? I really do not know what else to try.
Thanks in advance.

giorgos147 said:
Hello.
Recently (~one+ month ago), I replaced the battery of my OnePlus.
The problem is that I can not find any way to calibrate it. I have tried the "manual method" (fully drain then charge, then fully drain again and charge again e.t.c.) many times. I even tried to use some applications (that I really do not trust them for their reliability, but...).
Today, I have found some time and reinstalled the phone's OS (I am using Ressurection Remix - latest build). Nothing changed.
Here's the problem, with some concepts as examples:
I charge the battery until it gets to 100%. I use the phone for example till it gets to 60% (the drain is NOT quick. It needs some time till I get to that point). Then, if I restart the phone two (2) times, I get again 95-99% of battery. Then again, I use the phone till it gets to, for example, 40%. I twice reboot it again. ~90±%! If I do not reboot it twice, the battery indicator will not change. Or it will just lose 1% percent (for example, if I reboot one time when the phone is at 60%, I may get 59% when the phone will power up).
I charge the phone until it gets to 100%. I let the phone drain out the whole battery (0%). I boot it up again. No, the battery is still alive and it may give me around 70-90% (I am not so sure about those numbers, but the idea is that the phone can still operate - there is enough juice for the phone to work).
Any ideas? I really do not know what else to try.
Thanks in advance.
Click to expand...
Click to collapse
All generic batteries have these issues.So far,there's no perfect replacement to be found for battery.Visit Battery Thread in General section for more information.

try to flash CM 13.1.2 from BRT (Bacon root toolkit). it should work..