APN & SETTINGS for OTHER (not VZN) mobile operators

APN & SETTINGS for OTHER (not VZN) mobile operators - Verizon HTC One (M8)

Many of us are using Verizon M8 with other mobile operators.
As this device is not in other operators' catalogue, they don't publish correct APN & settings information, and I think it could be helpful if we share WORKING configurations here.
IMPORTANT: I know APN are published everywhere in the internet, but when I used them on my device, most of them turned out to be unuseful. The key here is to publish only working configurations.

Yoigo (Spain)
*Network settings>Network preference>
It will ask you to "add network". Type 21404, then "ok", and select GSM/UMTS/LTE. It will say list is full, don't bother about it.
*Network Settings>Preferred Network>
Select LTE/GSM/UMTS mode
*Network Settings>GMS/UMTS Options>Access Point Names>
You've got to add two. First: Name: Yoigo Navegador
APN: internet
Proxy: Not set
Port: Not set
Username: Not set
Pasword: Not set
Server: Not set
MMSC: Not set
MMS proxy: Not set
MMS port: Not set
MMS protocol: WAP 2.0
MCC: 214 <--Should be grayed out
MNC: 04 <--Should be grayed out
Authentication type: None
APN type: default,hipri,dun,supl
APN protocol: IPv4
APN roamin protocol: IPv4
APN enable/disable: APN enabled <--Should be grayed out
Bearer: Unspecified
Then you save (top right corner), go back, and add another: Name: Yoigo MMS
APN: mms
Proxy: Not set
Port: Not set
Username: Not set
Pasword: Not set
Server: Not set
MMSC: http://mmss/
MMS proxy: 193.209.134.141
MMS port: 80
MMS protocol: WAP 2.0
MCC: 214 <--Should be grayed out
MNC: 04 <--Should be grayed out
Authentication type: None
APN type: Not set
APN protocol: IPv4
APN roamin protocol: IPv4
APN enable/disable: APN enabled <--Should be grayed out
Bearer: Unspecified
Save and THAT'S ALL. Your device should be connecting voice/data 2G/3G/4G where available. :good:

Related

cm9 ics no mms

I am having a problem with the latest version of the cm9 pics from and getting and sending moms. Help please

Change your mms proxy to....
Sent from the Black Star`d ICS GNote.

What about all of the other settings. It does not allow me to edit an existing APN but only allows me to create a new one.
Name:
APN:
Proxy:
Port:
Username:
Password:
Server:
MMSC: http ://mmsc.cingular. com
MMS port: 80
MCC: 310
MNC: 410
Authentication type:
APN type:
APN protocol: IPv4
Bearer: Unspecified
What should I enter on all of these or should I just leave them blank and use the settings that you showed me.

Here is what mine is at on Uniporn build 39:
Name: ATT
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS port: 80
MCC: 310
MNC: 410
Auth Type: Not set
APN type: default,supl,mms
APN Protocol: IPv4

So should I make a change under the Bearer selection
It gives me 3 choices.
LTE
eHRPD
Unspecified

[Q] Please post definitive APNs to force 2G/3G/4G

I have been looking for this info for hours today and can't find a simple response.
I tried the *#*#4636#*#* trick, it doesn't stick.
Can someone post APNs that force 2G, 3G, and 4G non-LTE for the AT&T One X?
Is there a working mod that installs a toggle for this?

4636 trick is working fine for me.. but i'm not in AT&T..i'm using it in india and using cleanrom std.

I'm going to answer one of my own questions here folks, this is the LTE (true 4G) disable.
go to Settings>Mobile Network>Access Point Names
Click the Menu button, and select "New APN"
Enter the following:
Name: Media Net (name doesn't really matter, as long as its different from the original APN)
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,supl,mms (no spaces after each comma)
Bearer: Unspecified
then hit back a few times, you may need to reboot for this to work
can someone post the 2G APN?

theartialmartist said:
I'm going to answer one of my own questions here folks, this is the LTE (true 4G) disable.
go to Settings>Mobile Network>Access Point Names
Click the Menu button, and select "New APN"
Enter the following:
Name: Media Net (name doesn't really matter, as long as its different from the original APN)
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,supl,mms (no spaces after each comma)
Bearer: Unspecified
then hit back a few times, you may need to reboot for this to work
can someone post the 2G APN?
Click to expand...
Click to collapse
does the above APN give anyone constant disconnects/reeaallly spotty 4G?
I really want to permanently disable LTE but not at the expense of losing data every 2 blocks in NYC
please halp

theartialmartist said:
I'm going to answer one of my own questions here folks, this is the LTE (true 4G) disable.
go to Settings>Mobile Network>Access Point Names
Click the Menu button, and select "New APN"
Enter the following:
Name: Media Net (name doesn't really matter, as long as its different from the original APN)
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,supl,mms (no spaces after each comma)
Bearer: Unspecified
then hit back a few times, you may need to reboot for this to work
can someone post the 2G APN?
Click to expand...
Click to collapse
theartialmartist said:
does the above APN give anyone constant disconnects/reeaallly spotty 4G?
I really want to permanently disable LTE but not at the expense of losing data every 2 blocks in NYC
please halp
Click to expand...
Click to collapse
Its a known issue and it happens with everyone. Most likely because the LTE radio is still active , it just cant connect because the APN wont authenticate it. We need a true LTE off switch

apn settings??

Hey guys where can I find the wap.cingular apn settings , I remembered seeing it here somewhere but now I cant find it.

In this OP -> http://forum.xda-developers.com/showthread.php?t=1831858
EDIT:
Sorry, I lied. Wrong one. But, here it is:
Name: ATT
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not Set
MMSC: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Auth type: Not set
APN type: default,supl,mms (you can also enter hipri and internet)
APN Protocol IPv4 (although I used IPv4/IPv6 and it worked fine also)
Bearer: unspecified

APN Settings for Nexus 5 On Straight Talk Using AT&T SIM

You Don't need a New Sim . I have one of the original At&t Sims from ST.
Okay Gents it's been a long time since I've been on Android and I am Happy to be back.
My Last post was With the EVO4G and I was waiting for the next best phone to come out and the N5 is the one.
I've looked everyhwere for APN settings for the N5 using staright talk AT&T SIM with no luck .
So through trial and error I have found the APN setttings that are working. You don't need a New SIM just set up your phone as I will explain.
Set Up 2 APNs one I have labeled :
Name : Internet_line
APN: att.mvno
Proxy: Not Set
Port: Not set
Username: Not set
Pass: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS PORT: 80
MCC :310Name : Internet_line
MNC: 410
Authentication Type: None
APN Type: default,supl,mms,hipri ( No spaces)
APN Proto: IPv4
APN roaming Proto : IPv4
Bearer: Unspecified
MVNO Type: None
2nd APN
Name: Straight Talk
APN: tfdata
Proxy: Not Set
Port: 80
Username: Not set
Pass: Not set
Server: Not set
MMSC: http://mms3.tracfone.com
MMS Proxy: Not Set
MMS PORT: 80
MCC :310
MNC:410
A Type: None
APN: default,supl,mms,hipri ( No spaces)
APN Proto: IPv4
APN roaming Proto : IPv4
Bearer: Unspecified
MVNO Type: None
MNC:410
Authentecation Type: PAP or CHAP
APN type:mms
APN Proto: IPv4
APN roaming Proto : IPv4
Bearer: Unspecified
MVNO Type: None
ONCE YOU HAVE SAVED BOTH NEW APNs select the INternet Line One att.mvno
and Enjoy. Just hit Thanks on my post and pass it forward Happy to be Back on Android :victory:

flojo73 said:
You Don't need a New Sim . I have one of the original At&t Sims from ST.
Okay Gents it's been a long time since I've been on Android and I am Happy to be back.
My Last post was With the EVO4G and I was waiting for the next best phone to come out and the N5 is the one.
I've looked everyhwere for APN settings for the N5 using staright talk AT&T SIM with no luck .
So through trial and error I have found the APN setttings that are working. You don't need a New SIM just set up your phone as I will explain.
Set Up 2 APNs one I have labeled :
Name : Internet_line
APN: att.mvno
Proxy: Not Set
Port: Not set
Username: Not set
Pass: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS PORT: 80
MCC :310Name : Internet_line
MNC: 410
Authentication Type: None
APN Type: default,supl,mms,hipri ( No spaces)
APN Proto: IPv4
APN roaming Proto : IPv4
Bearer: Unspecified
MVNO Type: None
2nd APN
Name: Straight Talk
APN: tfdata
Proxy: Not Set
Port: 80
Username: Not set
Pass: Not set
Server: Not set
MMSC: http://mms3.tracfone.com
MMS Proxy: Not Set
MMS PORT: 80
MCC :310
MNC:410
A Type: None
APN: default,supl,mms,hipri ( No spaces)
APN Proto: IPv4
APN roaming Proto : IPv4
Bearer: Unspecified
MVNO Type: None
MNC:410
Authentecation Type: PAP or CHAP
APN type:mms
APN Proto: IPv4
APN roaming Proto : IPv4
Bearer: Unspecified
MVNO Type: None
ONCE YOU HAVE SAVED BOTH NEW APNs select the INternet Line One att.mvno
and Enjoy. Just hit Thanks on my post and pass it forward Happy to be Back on Android :victory:
Click to expand...
Click to collapse
The settings from their website work fine for me. No problems with LTE or MMS.
http://www.straighttalkbyop.com/program.php

Auto Refill Confirmation, MMS receive works!
Good day
I authorized a NEXUS 5 Sunday, ATT Micro Sim from Straight Talk
I used the APN settings from the website, last Sunday without any luck receiving MMS messages
I tried every setting on XDA I could find without any receive MMS success
Last night I received a confirmation from Straight Talk thanking me for my Auto Refill Signup
MMS receive started working right after that, go figure.
I am on the Straight Talk APN Settings, nothing different.:good:

Tello APN Settings

Dropping this here so I can find it later if I need it, and to help any soul out who hasn't had a chance to call customer service. I just edited the default APNs in the CM13.
For USA Sprint Tello Network:
Name: Sprint LTE
APN: n.mi.ispsn
Username: [email protected]
MMSC: http://mms.sprintpcs.com
MMS proxy: 68.28.31.7
MMS port: 80
MCC:310
MNC:120
APN Type: default,mms
Bearer: LTE
For MMS a new APN needs to be added (requires restart, on CM13 APN is not visible in manager, so verify it is correct on first entry)
Name: Sprint mms
APN: cinet.spcs
mmsc: http://mms.sprintpcs.com/servlets/mms
mms proxy: 68.28.31.7
proxy port: 80
APN Type: mms
bearer: LTE

toxigenicpoem said:
Dropping this here so I can find it later if I need it, and to help any soul out who hasn't had a chance to call customer service. I just edited the default APNs in the CM13.
For USA Sprint Tello Network:
Name: Sprint LTE
APN: n.mi.ispsn
Username: [email protected]
MMSC: http://mms.sprintpcs.com
MMS proxy: 68.28.31.7
MMS port: 80
MCC:310
MNC:120
APN Type: default,mms
Bearer: LTE
For MMS a new APN needs to be added (requires restart, on CM13 APN is not visible in manager, so verify it is correct on first entry)
Name: Sprint mms
APN: cinet.spcs
mmsc: http://mms.sprintpcs.com/servlets/mms
mms proxy: 68.28.31.7
proxy port: 80
APN Type: mms
bearer: LTE
Click to expand...
Click to collapse
Thank you:good:

Tello Internet/MMS 4G APN Settings For Android 10
APN access point
Name, internet
APN, n.mi.ispsn
Proxy, Not set
Port, Not set
Username, Not set
Password, Not set
Server, Not set
MMSC, http://mms.plspictures.com
MMS proxy, oap7.sprintpcs.com
MMS port, 80
MCC 312
MNC 530
Authentication type, Not set
APN type, default,mms
APN protocol, IPv4/IPv6
APN roaming protocol, IPv4
APN enable/disable, APN enabled
Bearer, eHRPD, LTE
MVNO type, GID
MVNO value, A00165FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
* The stock Android ROM shows MCC, 310, MNC, 000. But with the Lineage ROM, MCC312/MNC530 get LTE after rebooting, when the 310/000 were input manually, the APN will crash/disappear by itself.

Database Info

welcome