Related
i tried rooting my tab (GT-P3110) and in Odin it didn't showed pass, my tab rebooted and it showed an error saying "Firmware Upgrade encountered an issue..." i tried putting it in download mode to flash a new rom but it's stuck in that screen, i also tried putting it in recovery mode but it doesn't work either, is my tab totally bricked? can it still be fixed? i can't enter download mode or recovery mode, every time i turn it off it just goes back to the same screen and when i put the charger in, it still shows the same screen, help me please...thank you!
dhrexler said:
i tried rooting my tab (GT-P3110) and in Odin it didn't showed pass, my tab rebooted and it showed an error saying "Firmware Upgrade encountered an issue..." i tried putting it in download mode to flash a new rom but it's stuck in that screen, i also tried putting it in recovery mode but it doesn't work either, is my tab totally bricked? can it still be fixed? i can't enter download mode or recovery mode, every time i turn it off it just goes back to the same screen and when i put the charger in, it still shows the same screen, help me please...thank you!
Click to expand...
Click to collapse
I have the same problem, can some1 help?
I try using kies to fix the problem but the gt-p3110 is not supported when u go to Firmware upgrade and initilazation, put in the serial number from the back of your battery, then the tablet model and when u click ok is telling you that your model is not supported.
Can some1 tell me how to do it using Odin , even with complete wipe, or stock ROM.
Thx and please reply
"Firmware Upgrade encountered an issue..." = that´s the black screen of death. Download mode is enabled in this situation automaticly, no need to boot into downloadmode.
Uninstall Kies first! Maybe that´s why Odin failed! Maybe some Kies prozess running in the background.
Start Odin as Administrator,
Connect your tabelt to your PC (yes, with black screen of death!) - Odin will show "Added"
Now flash a Stockrom for your device
Safed your Tab
i did that with odin, untill it show'd pass but when i turn it on is the same
i loaded the file in the pda section,auto reboot and f.reset time boxes were checked
i used this http://www.hotfile.com/dl/182607797/b61e3af/P3110XXCLK7_P3110OXACLK7_BTU.zip.html from here http://forum.xda-developers.com/showthread.php?p=35095146 , the uk link
if u have a working method can you please tell me and live a link and how to do it?
thanks and please reply
maybe bad download? redownload a rom for your deivce e.g. from www.samsung-updates.com
Just did that , but is the same, I use Odin 3.07
Any more ideas?
Thanks
I notice this thread has been dead for some time. However, I am also in search of a possible solution to this as a colleague of mine passed one of these tablets on to me in the hope I could get some use out of it. It is in the same state as the previous posters claim, 'firmware encountered a problem.....'. Obviously I'm in a different situation as I did not buy this thing with my own money, not will I lose out if it is beyond repair. But I'm interested to solve this problem none the less.
So, so far I have attempted to flash a philztouch recovery using Odin which was unsuccessful and I have also tried to flash several compatible ROMs. All of which have failed, Odin confirming each time that the attempts were unsuccessful. I have read that the tablet in this state auto unlocks the bootloader, so I have ruled out that as a sticking point. I have read that flashing ROMs potentially won't work either as the corruption of the firmware is seated too deeply for this to have any effect. I know a possible solution is to try flash a new kernel as this goes a lot deeper, but this can be risky, however, like I mentioned above is not an issue for me as I have nothing to lose. Does anyone have any pointers on how to flash a new kernel? Surely there is a way to remove the corrupted firmware completely? I have to admit this is beyond the realm of anything I have used Odin for in the past. Also, I am more than aware some of my understanding may be incorrect so feel free to correct me. Any help would be greatly appreciated, even if it's just to point me in the right direction or towards some reference material which could shed some light on this particular problem.
Thanks in advance.
I got my GNP 12.2 (SM-P900) a few weeks ago and just tried to root it using Odin and download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
However it paused at cache.img and after 10 minutes or so it just failed.
I've tried it a few times, but same thing, and on start up all I get is "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried Kies 3 and Kies 2.6 but they both say my device is not supported, even if I try to go into Tools and do it it says the model name is incorrect and doesn't even give me an option to enter the serial number :-\
I looked around for a stock ROM but the closest I could find was the P901 and P905 (But I am the P900)
I don't really know what to do, so any advice would be much appreciated :angel:
Actually got Kies working, was just entering the model # wrong
This could probably be deleted / etc, not really sure how to do that
jns20 said:
Actually got Kies working, was just entering the model # wrong
This could probably be deleted / etc, not really sure how to do that
Click to expand...
Click to collapse
bump?
I'm having the same exact issue. I can get it into download mode. I've tried Kies several times and it keeps failing. Originally, I was using odin 3.07 to auto root on the sm-p900. During the process, the screen got this weird rainbow pixelated look, and odin told me the process has failed. It is now stuck on the error message "Firmware update has encountered an issue..."
Now I'm not really sure what to do. I've tried to reboot from download mode, and that sends me right back to the error message.
Any ideas?
ChampagneFerret said:
bump?
I'm having the same exact issue. I can get it into download mode. I've tried Kies several times and it keeps failing. Originally, I was using odin 3.07 to auto root on the sm-p900. During the process, the screen got this weird rainbow pixelated look, and odin told me the process has failed. It is now stuck on the error message "Firmware update has encountered an issue..."
Now I'm not really sure what to do. I've tried to reboot from download mode, and that sends me right back to the error message.
Any ideas?
Click to expand...
Click to collapse
IIRC you need to reflash recovery and you should be able to boot up again.
muzzy996 said:
IIRC you need to reflash recovery and you should be able to boot up again.
Click to expand...
Click to collapse
I'm sorry if I sound stupid but how do I reflash the recovery? I keep searching for a recovery ROM but I can't find anything, so I must be misunderstanding something here.
ChampagneFerret said:
I'm sorry if I sound stupid but how do I reflash the recovery? I keep searching for a recovery ROM but I can't find anything, so I must be misunderstanding something here.
Click to expand...
Click to collapse
TWRP 2.7.0.0 is available now! http://forum.xda-developers.com/showthread.php?t=2706982 :good:
icem237 said:
TWRP 2.7.0.0 is available now! http://forum.xda-developers.com/showthread.php?t=2706982 :good:
Click to expand...
Click to collapse
Thank you very much. In case anyone else is wondering. I ended up asking the problem with Samsung kies, using the upgrade feature rather than emergency recovery. Wiped all my data but u have my tablet back.
Kind of wondering what went wrong with the root attempt. I followed the instructions to the T.
ChampagneFerret said:
Kind of wondering what went wrong with the root attempt. I followed the instructions to the T.
Click to expand...
Click to collapse
Did you use Odin 3.0.7 or 3.0.9? 3.0.7 is included with CF and MUST be used even though 3.0.9 is the latest. If odin was already installed on your PC and you used 3.0.9 bad things are going to happen.
ChampagneFerret said:
Thank you very much. In case anyone else is wondering. I ended up asking the problem with Samsung kies, using the upgrade feature rather than emergency recovery. Wiped all my data but u have my tablet back.
Kind of wondering what went wrong with the root attempt. I followed the instructions to the T.
Click to expand...
Click to collapse
I myself have tried odin 3.07 and .09 and mine just hangs when cache is being written to. A full green bar but will not move pass the cache portion of the install.
icem237 said:
I myself have tried odin 3.07 and .09 and mine just hangs when cache is being written to. A full green bar but will not move pass the cache portion of the install.
Click to expand...
Click to collapse
I tried both as well, and that's exactly what happened to me. During the process, my screen went all screwy and that's when it told me the process had failed.
I had some of the problems mentioned above. My attempt to flash CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 failed using Odin3-v3.07.exe.
It tries for several minutes and then says failed.
I then used Kies (not Kies 3) to reflash the tablet to factory settings. Here its important to know that Kies will never "connect" you have to ignore that and go to tools and "firmware upgrade and initialization". Google "Firmware upgrade encountered an issue” – Got This Error While", the first result on "droidviews" is the guide i used to fix this.
I then went into the settings and enabled "USB Debugging". Something i had forgotten before. I tried to flash the root file again, but it still failed.
Given that i was able to reflash the firmware with kies, i would say my USB port / cable / drivers must all be good.
What else should i try?
Flash Stock Recovery
davschm said:
I had some of the problems mentioned above. My attempt to flash CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 failed using Odin3-v3.07.exe.
It tries for several minutes and then says failed.
I then used Kies (not Kies 3) to reflash the tablet to factory settings. Here its important to know that Kies will never "connect" you have to ignore that and go to tools and "firmware upgrade and initialization". Google "Firmware upgrade encountered an issue” – Got This Error While", the first result on "droidviews" is the guide i used to fix this.
I then went into the settings and enabled "USB Debugging". Something i had forgotten before. I tried to flash the root file again, but it still failed.
Given that i was able to reflash the firmware with kies, i would say my USB port / cable / drivers must all be good.
What else should i try?
Click to expand...
Click to collapse
For those getting stuck or failing root, Make sure your usb drivers are updated in Kies 3 then flash stock recovery in Odin 3.07. Don't get mixed up with stock firmware (over 1GB) and stock recover (only around 20MB).
Stock recovery is here:
http://download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
Thread is here:
http://forum.xda-developers.com/showthread.php?p=50492301&nocache=1
Russbad said:
For those getting stuck or failing root, Make sure your usb drivers are updated in Kies 3 then flash stock recovery in Odin 3.07. Don't get mixed up with stock firmware (over 1GB) and stock recover (only around 20MB).
Stock recovery is here:
http://download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
Thread is here:
http://forum.xda-developers.com/showthread.php?p=50492301&nocache=1
Click to expand...
Click to collapse
Question, what is the purpose of the Stock recovery and CWM recovery?
Also, after trying three times, i was able to get the flash to work. After each failier i used Kies (not kies 3) to flash back to factory. Would these recoveries have helped? Maybe i wouldn't have lost data?
davschm said:
Question, what is the purpose of the Stock recovery and CWM recovery?
Also, after trying three times, i was able to get the flash to work. After each failier i used Kies (not kies 3) to flash back to factory. Would these recoveries have helped? Maybe i wouldn't have lost data?
Click to expand...
Click to collapse
Stock recovery is what your device originally comes with. CWM recovery is a modified version of that and it allows you more functionality.
When I messed up my update and root, my device would not boot up at all. I flashed the stock recovery and that enabled me to successfully root. No data was lost, no factory reset was needed and all my apps and settings were unchanged.
Don't mean to bump this thread, but I'm having the same issue. Odin 3.07 hangs up when it gets to cache.img, and it's non-responsive. I don't care about rooting it, I just want a stock firmware back. I've tried the files that Russbad posted, same issue. Running Note Pro 12. SM-P900 on 4.4.2.
bioncorp said:
Don't mean to bump this thread, but I'm having the same issue. Odin 3.07 hangs up when it gets to cache.img, and it's non-responsive. I don't care about rooting it, I just want a stock firmware back. I've tried the files that Russbad posted, same issue. Running Note Pro 12. SM-P900 on 4.4.2.
Click to expand...
Click to collapse
Try this: With your device unplugged from your PC, open Kies 3, go to tools tab and uninstall the drivers. Then plug your device in and reinstall drivers.
I don't know if it makes a difference but if you get your device to boot up, enable developer options and check USB debugging.
Also make sure you are using the cables that came with your Tablet.
Then flash stock recovery and flash stock firmware.
If it still fails, check that your downloaded firmware and recovery are not corrupted, download them again.
Also try these procedures using different USB ports.
Good luck!
Russbad said:
Try this: With your device unplugged from your PC, open Kies 3, go to tools tab and uninstall the drivers. Then plug your device in and reinstall drivers.
I don't know if it makes a difference but if you get your device to boot up, enable developer options and check USB debugging.
Also make sure you are using the cables that came with your Tablet.
Then flash stock recovery and flash stock firmware.
If it still fails, check that your downloaded firmware and recovery are not corrupted, download them again.
Also try these procedures using different USB ports.
Good luck!
Click to expand...
Click to collapse
I found the issue, it should work with everyone with it. Some people don't have the .md5 extension enabled in their archive viewer, so by simply removing the .md5 (left with CF_XXXX.tar), and flashing that it works 100% fine.
bioncorp said:
I found the issue, it should work with everyone with it. Some people don't have the .md5 extension enabled in their archive viewer, so by simply removing the .md5 (left with CF_XXXX.tar), and flashing that it works 100% fine.
Click to expand...
Click to collapse
I finally got mine rooted by simply trying over and over. I re-downloaded the CF flash tool and used 7zip to extract it several times, and used a different usb port at least once. Not that I really thought there was a problem with my extraction or the download or my USB port. But from what i have seen posted, you just have to try it 3 or 4 (maybe even 10) times until you get lucky and it works.
I did at one point try to recover my Note 12.2 with the "recovery.img" instead of flashing it with a full factory re-image (which causes data loss) but that didn't work for me ether. But I later had good luck with using Odin 3.09 to flash TWRP. So at least I now have a good custom recovery and backup tool.
okay everyone, I'm going to try these methods and report on what happened. Thank you for being so helpful. :cyclops:
ChampagneFerret said:
okay everyone, I'm going to try these methods and report on what happened. Thank you for being so helpful. :cyclops:
Click to expand...
Click to collapse
FINALLY! :laugh: I got it to root!
I ended up using a different computer in the end and used Kies 2.6 for the drivers. I tried this a total of maybe 8 or 9 times, and it worked on the second attempt on the second attempt.
For the record, I left "md5" in the file when rooting, and that's when it worked.
My Phone sprint S3 is rooted with a stock4.1.2 rom. I was going to put my phone in recovery to do a backup because I wanted to flash ND8 then a new Kit Kat rom. The phone wouldn't boot to recovery. I read something about using Kies if this happens. I updated Kies and connected the phone to it. Now it boots to the "Samsung" on the screen and goes to small windows with "unfortunately the process.com.android.phone has stopped" when I hit OK it says ".process.acore has stopped". It goes in to some more windows sometimes. can I fix this or am I screwed. I just wnat to go back to my rooted 4.1.2 stock rom for now and then figure out where to go from there. If the only thing to do is flash the phone with ND8 with Oden so be it, I'm not sure how at this point to do that.
congaman59 said:
My Phone sprint S3 is rooted with a stock4.1.2 rom. I was going to put my phone in recovery to do a backup because I wanted to flash ND8 then a new Kit Kat rom. The phone wouldn't boot to recovery. I read something about using Kies if this happens. I updated Kies and connected the phone to it. Now it boots to the "Samsung" on the screen and goes to small windows with "unfortunately the process.com.android.phone has stopped" when I hit OK it says ".process.acore has stopped". It goes in to some more windows sometimes. can I fix this or am I screwed. I just wnat to go back to my rooted 4.1.2 stock rom for now and then figure out where to go from there. If the only thing to do is flash the phone with ND8 with Oden so be it, I'm not sure how at this point to do that.
Click to expand...
Click to collapse
see this
Newest odin
flash- said:
see this
Click to expand...
Click to collapse
says to flash the bootloader in the "PDA" section. The newest odin doesn't have a "PDA" section. Have an idea what I should do about that?
congaman59 said:
says to flash the bootloader in the "PDA" section. The newest odin doesn't have a "PDA" section. Have an idea what I should do about that?
Click to expand...
Click to collapse
install the version they work on it in the guide ..look for it ...you shall find it somewhere
having driver problem
Oden3 ver3.09 to do what you said. I still can't get the usb driver to work with my computer and phone. It is a SPH-L710 on sprint.
Okay got the driver but getting FAIL
I got the driver to work after I got the phone in to download mode. However every time I try to flash the VRALEC bootchain I get a fail. I have the phone in download mode.
got first bootloader to run. But
I got the driver to work after I got the phone in to download mode. I think I got the first bootloader to run even though it failed every time I tried to flash it. I however can't get the second one to even show up in Odin!
Hey,
I was running Car HD Rom and just was in holiday when today on my way back suddenly navigation und music stopped and the phone then said "Downloading, do not turn of target". That continued, nothing worked. No boot in recovery, no system.
Now at home I downloaded the OFW via Samfirmware Tool and flashed it, all slots except the PIT. The phone started into the official Samsung recovery, and I pressed "reboot to system". Since then it is in a Bootloop. I tried to flash again but Odin says error "(DeviceInfo), also if I try to flash a older firmware. So yeah I'm clueless, knox is still triggered so warranty doesn't help much either.
Please help.
maybe vol down + Bixby + power to enter phone into download mode without going into recovery and try flashing the rom again with odin that way?
We need more info op. We cant help you if you dont provide us with details!
Device model would help alot.
Twrp installed?
Make sure you're not using a modified odin. In odins settings make sure you select the nand erase all option and repartition
G955F and I'm in DBT.
As said, only Download Mode works. Nothing else. And ofc after flashing the OFW there is no TWRP anymore. And as I said, I can't flash the OFW again since it runs into "DeviceInfo" error. It's standard Odin 3.12.3. Nand erase runs into "Write Error", re-partition doesn't work either. Everything via Odin runs into FAIL.
PUSH
I just saw an hour ago this thread (eventhough it was created hours after my last answer) and tried the KIES way since everything in Odin is FAIL. After KIES was done the phone threw me into the official samsung recovery again just like before, I just tapped on "Reboot to system" again and now I'm like half an hour waiting again. So I guess that doesn't work either. Should I have done anything there? Like Factory Reset or delete cache? Is it even normal that it boots into recovery?
Now I'm totally locked. After an hour of waiting I tried again with Odin which failed, then I tried overall 4 times with Kies again which failed, and I just tried with SmartSwitch which failed also. I'm clueless..
MClolwut said:
Now I'm totally locked. After an hour of waiting I tried again with Odin which failed, then I tried overall 4 times with Kies again which failed, and I just tried with SmartSwitch which failed also. I'm clueless..
Click to expand...
Click to collapse
KIES doesn't work for the S8+, you must use SMART-SWITCH!
henklbr said:
KIES doesn't work for the S8+, you must use SMART-SWITCH!
Click to expand...
Click to collapse
Yeah but I said, SmartSwitch failed also.
I just found and tried this and it worked. I flashed again the latest firmware from Samfirmwares with Re-partition and Nand-erase in Odin, I'm back in the recovery again where I always get the error "failed to mount /efs". I'm afraid to press on "Reboot system now" because I guess it won't work just like before.
Hi guys,
I need help with my G955F. I was on Carotid's ROM and attempted to flash the AQL5 (BTU) firmware downloaded from Samfirm to go back to stock. The flash failed during writing the system.img and now it is stuck on the "Error has occurred while updating the device software" screen.
I can get into Download mode and I can boot into TWRP using ODIN.
Each attempt to flash a firmware in ODIN throws up a "FAIL" during the system.img write portion.
Each attempt to reflash a ROM from my external SD card in TWRP throws up an error while writing to system. /System is unmounted when I start up TWRP and I have to manually mount it each time.
The phone is "not supported" in Samsung Smart Switch.
Anyone have any ideas?
Never mind!
I noticed that whenever I plugged the phone into the PC when the "Error has occurred while updating the device software" screen was on it flashed up as "added" in Odin.
So I tried flashing the stock AQL5 firmware while on this screen and it worked!
I'm just going to leave this here because it's an avenue I never considered and haven't seen online.
ianrobbie said:
Never mind!
I noticed that whenever I plugged the phone into the PC when the "Error has occurred while updating the device software" screen was on it flashed up as "added" in Odin.
So I tried flashing the stock AQL5 firmware while on this screen and it worked!
I'm just going to leave this here because it's an avenue I never considered and haven't seen online.
Click to expand...
Click to collapse
Good observations.
You are correct, if the first flash fails, immediately re-enter download mode and flash again.
JeffDC said:
Yes, if the first flash fails, immediately re-enter download mode and flash again.
Click to expand...
Click to collapse
Yeah, but that's the thing. I wasn't even in Download mode for the successful flash. I was just on the Emergency Recovery screen and when I started the firmware flash, a small progress bar appeared on the screen below the text.
ianrobbie said:
Yeah, but that's the thing. I wasn't even in Download mode for the successful flash. I was just on the Emergency Recovery screen and when I started the firmware flash, a small progress bar appeared on the screen below the text.
Click to expand...
Click to collapse
Have not heard of that before - new to me, interesting find.
So the way to replicate is . . .
The way I got there was to have a screwed up install. I tried to flash a stock firmware and it generated a FAIL in Odin during the /system.img write.
The phone then rebooted to a pale green screen with a large triangle and exclamation mark advising me that the phone was in Emergency Recovery Mode and I should restore it by plugging it into a PC with Smart Switch installed.
Interestingly, Smart Switch refused to recognise my phone, saying it was an "unsupported device".
After numerous attempts to flash new firmware through Odin and TWRP (even using the two-step method of getting into Download mode) and using different cables/ports I was planning on getting it professionally repaired until I noticed that when Odin was running and I plugged the phone in, with the emergency screen on, it was "added" as it would be during Download Mode.
I loaded up the AQL5 firmware, and tried to flash. A progress bar appeared under the text on screen and it got about halfway through flashing /system when it failed again, but this time it has progressed much further than any other attempt.
I then reset everything, used an official Samsung cable and a port directly connected to the motherboard on my PC (I had been using a USB extension cable before) and attempted another flash and it worked!
I don't know how you would go about replicating those circumstances without risking your phone but if you find yourself stuck in the same situation, give it a try.
It worked for me.
Thanks, ianrobbie.