Related
I have an at&t LG G2 D800 the android version is 4.2.2. my phone is ROOTED and I do have PHILZ Recovery. I was trying to do a hard reset or factory reset not sure what the difference is. what seemed to happen in the process is my phone was almost completely formatted and now i have access to only download mode and I can get into Philz Recover still. other then that when i boot my phone up it just gets stuck on LG boot up screen and my LED notification light blinks. need help please. cant seem to find solution or I just haven't looked in the right place yet. if anyone knows how to help or at least point me in the right direction. I give huge thanks in advance.
So you have a custom recovery installed. Good! Head over to your phones forum section and look for a stock ROM if you can find it.
If not then find an aftermarket one. Once you have found one. Download the needed files. Some included Google apps and some don't. It'll state it. Download the two zips or one if everything's together. Boot into recovery mode on your phone, and select storage and mounts.
From there go to the bottom or look for mount internal SD card or external SD card. Mount it. Then transfer the files you had downloaded to the root of your phone. Once done. Un mount it and remove the cable. Go to the menu of the recovery, select factory reset option. Then install the .zips.
Your phone should then boot up. Something must have gone wrong when you had done a hard reset.
Reply back when you've done the above. And tell me how it went.
Sent from my Nexus 5 using Tapatalk
Thank you for your help. my download speed is horrible so i'm in the process of downloading the two zip files for going back to stock. ill let you know when i get them downloaded and if it works.
Okay, good luck!
Sent from my Nexus 5 using Tapatalk
I have the same problem. I was running 4.2.2 rom under twrp recovery. Then I flasher Philz and flashed 4.4.2 rom. I was unsatisfied with it so I flashed back the old recovery so I could restore the backup. I booted twrp, recovered the backup and reeboted the system. After booting it was saying some crap like this and that procces stopped. Now Im flashing the .zip (just downloaded rom, no data), and after that its there just the boot loop (lg picture and blinking LED). Please help what to do :good:
you should flash via download mode with kdz file to go back to stock
I don't know if it's better etiquette to semi-hijack this thread or post a new thread, but I've created the same problem for myself today. I instaled TWRP recovery successfully and downloaded a CM11 nightly along with gapps for CM11. Today I installed the zips but when my phone rebooted it started the endless LG logo loop thing, which sounds the same as he describes.
I can't seem to boot into my recovery with any key combination. Volume up and power, volume down and power, they all lead to a "Hardware Key Control Mode" menu. At this point my goal is a factory reset. Maybe the same solution that helps him will help me? I need to get the phone into either download mode or to the TWRP menu.
InlineFourPower said:
I don't know if it's better etiquette to semi-hijack this thread or post a new thread, but I've created the same problem for myself today. I instaled TWRP recovery successfully and downloaded a CM11 nightly along with gapps for CM11. Today I installed the zips but when my phone rebooted it started the endless LG logo loop thing, which sounds the same as he describes.
I can't seem to boot into my recovery with any key combination. Volume up and power, volume down and power, they all lead to a "Hardware Key Control Mode" menu. At this point my goal is a factory reset. Maybe the same solution that helps him will help me? I need to get the phone into either download mode or to the TWRP menu.
Click to expand...
Click to collapse
Im also trying to get into download mode. But it wont let me Im following this thread.
http://forum.xda-developers.com/showthread.php?t=2432476&highlight=download+mode
Hi,
I am new to this site and fairly new to rooting and stuff and need assistance with my Sony Xperia S (LT26i). If i am not in the right pace for this please point me in the right direction. I have installed a custom rom and custom recovery which let me upgrade from 4.1.2 to 4.3 which was working fine then when I flashed a different custom rom after that to get 4.4.1 I lost access to my custom recovery. The main issue is that I need help with changing the custom rom I have installed, for some reason I can no longer boot into TWRP or CWM (using power + vol up), the phone simply boots normally and skips the whole process therefore I cannot flash anything. I have looked for hours over the net on how to get into recovery but could not find a solution.
I also assumed that when installing custom recovery and custom roms that you would need to be rooted but when I check with Root Checker it says that I am not. So any assistance would be great
Bizzmagizz said:
Hi,
I am new to this site and fairly new to rooting and stuff and need assistance with my Sony Xperia S (LT26i). If i am not in the right pace for this please point me in the right direction. I have installed a custom rom and custom recovery which let me upgrade from 4.1.2 to 4.3 which was working fine then when I flashed a different custom rom after that to get 4.4.1 I lost access to my custom recovery. The main issue is that I need help with changing the custom rom I have installed, for some reason I can no longer boot into TWRP or CWM (using power + vol up), the phone simply boots normally and skips the whole process therefore I cannot flash anything. I have looked for hours over the net on how to get into recovery but could not find a solution.
I also assumed that when installing custom recovery and custom roms that you would need to be rooted but when I check with Root Checker it says that I am not. So any assistance would be great
Click to expand...
Click to collapse
try to root again or if it wont work, back to stock and start from begining
Paget96 said:
try to root again or if it wont work, back to stock and start from begining
Click to expand...
Click to collapse
Thanks for the feedback, because I am quite new to this stuff can you tell me what the best and easiest way to root the phone is? I have tried the root toolkit but it wont work with my rom i have atm. I cant access my recovery either so how would I go about getting back to stock rom?
Bizzmagizz said:
Thanks for the feedback, because I am quite new to this stuff can you tell me what the best and easiest way to root the phone is? I have tried the root toolkit but it wont work with my rom i have atm. I cant access my recovery either so how would I go about getting back to stock rom?
Click to expand...
Click to collapse
you have all here
follow this,and back to stock, then root again, install cwm or twrp recovery, and install what ever you want
http://xperiafirmware.com/8-firmware/13-sony-xperia-s-lt26
Do you know of any other site where I can get the firmware from?, when I try and extract the file after I download it it's corrupted. I have tried multiple times with no luck.
Bizzmagizz said:
Do you know of any other site where I can get the firmware from?, when I try and extract the file after I download it it's corrupted. I have tried multiple times with no luck.
Click to expand...
Click to collapse
witch android do you want?
---------- Post added at 01:54 PM ---------- Previous post was at 01:51 PM ----------
Here is 4.0.4
https://docs.google.com/file/d/0B_d8uWGbkaetLThpYzEwZUh5aTg/edit
steps:
how to install the newest Android 4.0.4 for Sony XPERIA S LT26i
a) first of all, check your firmware version (if you already have the newest one, you do not need this tutorial)
b) download and install latest Flashtool from here (mirrors Google Drive or Mega)
c) download also latest Android 4.0.4 (mirror) for Sony XPERIA S LT26i
d) paste the ftf file downloaded in step c) to folder „Firmware“ included in the XPERIA Flashtool
e) open the XPERIA Flashtool, click on flash and choose downloaded firmware, than click ok. Important - if you do not want to delete any data of your phone, just uncheck flashing userdata.sin file. All data will remain in your phone, but sometimes it can cause additional troubles. So it is better (and I recommend that) to do the backup of your personal data, than proceed with clean instalation and then restore your personal data.
f) turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button
g) after few minutes all is done and your phone gets the new firmware
Here you got 3 ways to update good luck
http://androidteen.com/xperia-s-lt26i-update-to-android-4-1-2-jelly-bean-official-firmware-6-2-b-1-96/
Ok so I successfully downloaded the firmware file but I got an error when using the flash tool, I have attached the log if you can maybe help me out with what went wrong.
Bizzmagizz said:
Ok so I successfully downloaded the firmware file but I got an error when using the flash tool, I have attached the log if you can maybe help me out with what went wrong.
Click to expand...
Click to collapse
The clue's in the error message - you don't have the required drivers installed.
There's a directory named "drivers" under the main flashtool dir. Run flashtool-drivers.exe and install the appropriate drivers. I think "Common Drivers Viskan Board" is the one you need. I ended up installing all of them to get it to flash (which took ages).
Ok so I got it to work, all I had to do was hold down the vulumn down button for like an extra 5 seconds while it began to flash
Thanks for the help, I appreciate it
Bizzmagizz said:
Ok so I got it to work, all I had to do was hold down the vulumn down button for like an extra 5 seconds while it began to flash
Thanks for the help, I appreciate it
Click to expand...
Click to collapse
work??
dont forget to press thanks
Hello again
So I have successfully rooted the device and installed TWRP but as before I cannot seem to get into the recovery mode, when I boot the phone with "power and vol +" it doesn't boot into recovery but instead there is a quick glimpse of what I think is the recovery mode (I cant actually see it but something happens for a split second) but it flashes past way too fast then goes to the normal Sony logo and continues booting normally. I have tried this like at least 20 times in the last 2 weeks and have researched other ways to boot into recovery but I can't seem to find anyone with an answer. Do you know what could fix this? Or is there a way to boot into recovery using a computer?
Bizzmagizz said:
Hello again
So I have successfully rooted the device and installed TWRP but as before I cannot seem to get into the recovery mode, when I boot the phone with "power and vol +" it doesn't boot into recovery but instead there is a quick glimpse of what I think is the recovery mode (I cant actually see it but something happens for a split second) but it flashes past way too fast then goes to the normal Sony logo and continues booting normally. I have tried this like at least 20 times in the last 2 weeks and have researched other ways to boot into recovery but I can't seem to find anyone with an answer. Do you know what could fix this? Or is there a way to boot into recovery using a computer?
Click to expand...
Click to collapse
use this to reboot into recovery
ang go to reply, because I dont see you post
https://play.google.com/store/apps/details?id=pl.qbanin.reboot
URGENT HELP NEEDED PLEASE;
Can you please help my buddy Tyler, he just got the T-Mobile Note 5, and he rooted it, and installed TWRP Recovery, and flashed a ROM for the first time, but he's afraid he may have bricked his device ?
Here's the thread I have been coaching him at. Any opinions ?
http://hardforum.com/showthread.php?t=1869279&page=23
Thank you.
As long as he knows what he's doing and has a unlock bootloader he should be fine
airam0931 said:
As long as he knows what he's doing and has a unlock bootloader he should be fine
Click to expand...
Click to collapse
He did get the whole root thing figured out, and his phone does have SuperSU installed, he then installed TWRP Recovery through Odin, and is running the latest Modem COI5.
He downloaded a T-Mobile ROM, and Arty97 Kernel, flashed the ROM + Kernel, and he said been stuck on the boot screen for 25 minutes, and can't get back into Recovery.
Suggestions ?
Actually never mind after reading that whole thread I would reccomend download the stock rom and then flashing it . This happened to me when I flashed the wrong framework for my device. It got stuck on the same screen . I flashed in with my stock rom and it went back to normal and I didn't lose anything.
Tyler made this comment, can't seem to even power off the phone.
amn, you really are trying to help. That's awesome. Sadly however, the thing won't turn off no matter how long I hold the power button.
I saw one thread on reddit that suggested downloading a stock ROM and flashing through Odin. But, I can't find a stock ROM and I don't think you can flash ROMs through Odin.
He did manage to get this after trying to power down./
[/QUOTE]
Now what he asked ?
Tell him to put it into download mode then flash his stock rom . I Googled it and found it super easily and even found instructions
This is Tyler, the guy Zorachus has tried so hard t help. I've been googling for stoc ROMs but haven't found any to download. Can I flash a ROM through Odin?
I'm iPhone jailbreaker guy, so all this Android stuff is new t me.
I want to post the link I found but I can't because this site has a 10 post rule to post links and I haven't done 10 posts and don't worry this is my first Android phone . I've been jailbreaking since 4.1.2 so the switch was weird for me too haha but yes you can flash flash a rom through Odin
Here:
http://www.sammobile.com/firmwares/download/56127/N920TUVU2COI5_N920TTMB2COI5_TMB/
Make sure it is the correct model and follow the instructions.
Don't worry, you should be fine.
If he got stuck again, hold down volume up and down and power at the same time and it reboots
Sent from my SM-N920T using Tapatalk
Get back to download mode by holding home power and volume down at same time and Odin right stock rom for n920t and should be fine you can find all you need in the n5 t-mobile forum on xda-developers most everyone in forum are very helpful
Sent from my SM-N920T using Tapatalk
matteosaeed said:
If he got stuck again, hold down volume up and down and power at the same time and it reboots
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
Just the volume down and power does the trick ?
Sent from my SM-N920T using Tapatalk
I had this same issue, I found out that TWRP did not actually flash the rom so the phone sat on the boot logo with no OS to load, then read up on arter97's kernel and he recommends switching to PhilZ touch recovery instead of TWRP. He provides a download to this recovery on his thread I do believe. Luckily I had downloaded the recovery and simply flashed it via TWRP (Hint: while I was stuck on the boot up logo, the only thing that worked for me is holding Vol-, home and power, then as soon as the screen goes dark, switch from holding Vol- and hold Vol+ instead, wait a bit and recovery should boot).
Once I got Philz touch installed, I rebooted the recovery and voila, no more TWRP. I simply flashed the ROM through it and rebooted again, back in business.
So to conclude, I get the feeling you're experiencing the same problem, where you went wrong is using TWRP with the arter97 kernel.
EDIT: You're in luck! Go here: http://arter97.com/browse/exynos7420/kernel/5.0/n920tw8/
Grab the tar.md5 file and flash with Odin with the phone in download mode, then reboot to new recovery and flash your rom again
micfinn said:
I had this same issue, I found out that TWRP did not actually flash the rom so the phone sat on the boot logo with no OS to load, then read up on arter97's kernel and he recommends switching to PhilZ touch recovery instead of TWRP. He provides a download to this recovery on his thread I do believe. Luckily I had downloaded the recovery and simply flashed it via TWRP (Hint: while I was stuck on the boot up logo, the only thing that worked for me is holding Vol-, home and power, then as soon as the screen goes dark, switch from holding Vol- and hold Vol+ instead, wait a bit and recovery should boot).
Once I got Philz touch installed, I rebooted the recovery and voila, no more TWRP. I simply flashed the ROM through it and rebooted again, back in business.
So to conclude, I get the feeling you're experiencing the same problem, where you went wrong is using TWRP with the arter97 kernel.
EDIT: You're in luck! Go here: http://arter97.com/browse/exynos7420/kernel/5.0/n920tw8/
Grab the tar.md5 file and flash with Odin with the phone in download mode, then reboot to new recovery and flash your rom again
Click to expand...
Click to collapse
Hey thanks!!!! You saved my a$$ I have been dealing with this for 6+ hours now & couldn't get past the boot logo & your suggestion worked! I <3 you! Lol
Thank **** I found your post mate, I was stuck in a never ending boot loop with no way to get into recovery either.
The trick about holding down Vol-, home and power, and then switching to vol+ at blackscreen but keeping the others down, that thing worked and I was able to make it into my recovery!
Sadly however I made the most foolish mistake of all in my hurry and went for a factory reset.
On top of that I don't think that Titanium Backup was set to auto sync on my new phone so I might possibly have lost everything I have. Let's find out.
I was trying to fix my girlfriends nexus 5 that was doing the restart loop after an update. Everything seemed to go fine. Unlocked the bootloader, etc. Flashed the newest rom (6.0.1 (MMB29S) ce1d670f61061c3902f3997510ea55d7 6bfcdfa4f4840898e5d76fa044f5e6a0f71343bf) and then something obviously went wrong (not quite sure, dont think i touched anything) and it's now stuck in a different kind of loop that only loops while it's plugged in. Ive uploaded a video to youtube, but since im a new user i cant actually link it properly yet. Hopefully this wont annoy any mods, I promise it's not spam. youtube . be / yNSoiTPnGZw
Is there any way to get it to stay on for more than a couple seconds to retry the flashing?
Any help is appreciated.
atomkrieg said:
I was trying to fix my girlfriends nexus 5 that was doing the restart loop after an update. Everything seemed to go fine. Unlocked the bootloader, etc. Flashed the newest rom (6.0.1 (MMB29S) ce1d670f61061c3902f3997510ea55d7 6bfcdfa4f4840898e5d76fa044f5e6a0f71343bf) and then something obviously went wrong (not quite sure, dont think i touched anything) and it's now stuck in a different kind of loop that only loops while it's plugged in. Ive uploaded a video to youtube, but since im a new user i cant actually link it properly yet. Hopefully this wont annoy any mods, I promise it's not spam. youtube . be / yNSoiTPnGZw
Is there any way to get it to stay on for more than a couple seconds to retry the flashing?
Any help is appreciated.
Click to expand...
Click to collapse
What was your flashing procedure, did u is a toolkit or do it manually, can u get it into bootloader or recovery? What files did u is for update and where did u get them?
Sent from my XT1526 using Tapatalk
soupysoup said:
What was your flashing procedure, did u is a toolkit or do it manually, can u get it into bootloader or recovery? What files did u is for update and where did u get them?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
First i followed the guide here on xda to unlock the bootloader(guide-nexus-5-how-to-unlock-bootloader-t2507905), installed twrp, which went fine. Then i realized that i couldnt (or didnt realize how to via command line) to copy the stock rom and install it via twrp, so then i followed this guide here on xda (tutorial-how-to-flash-factory-image-t2513701) with the factory img (6.01 hammerhead), got to this point in the guide: ★After everything finished, select "Recovery" using the volume buttons. then it stalled out,turned off and now just cycles on and offf through the google logo with the lock picture or if i hold down the volume button it will go into the bootloader briefly then restart, rinse repeat.
atomkrieg said:
First i followed the guide here on xda to unlock the bootloader(guide-nexus-5-how-to-unlock-bootloader-t2507905), installed twrp, which went fine. Then i realized that i couldnt (or didnt realize how to via command line) to copy the stock rom and install it via twrp, so then i followed this guide here on xda (tutorial-how-to-flash-factory-image-t2513701) with the factory img (6.01 hammerhead), got to this point in the guide: ★After everything finished, select "Recovery" using the volume buttons. then it stalled out,turned off and now just cycles on and offf through the google logo with the lock picture or if i hold down the volume button it will go into the bootloader briefly then restart, rinse repeat.
Click to expand...
Click to collapse
Have u tried messing with the power button, there are a lot of issues on the nexus 5 with the power button causing loops, simply from getting stuck, try playing with the power button a little and see of that helps, it might just need to be replaced
Wait, did u flash the factory img with twrp, or did u flash it using fastboot?
Sent from my XT1526 using Tapatalk
soupysoup said:
Have u tried messing with the power button, there are a lot of issues on the nexus 5 with the power button causing loops, simply from getting stuck, try playing with the power button a little and see of that helps, it might just need to be replaced
Wait, did u flash the factory img with twrp, or did u flash it using fastboot?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
in the end fastboot, since i coulndt see how i could copy the img over to install via twrp
im pretty sure the button is fine, since it was cycling from the ota update install, then was working fine unlocking the bootloader, but after the flash, it crapped the bed.
Different problem
I had a problem where the google logo keeps on booting up with a slight vibration.This started to happen when my was dropped.I initially thought that was a software issue and thought of installing new ROM's but eventually my device was not detected :crying:
So i took it to repair shop near my house and they said it would cost 2500
I did some google research and found the reason was due to the power button being stucked during the fall.I got that repaired and my device is good to go
siddhu007 said:
I had a problem where the google logo keeps on booting up with a slight vibration.This started to happen when my was dropped.I initially thought that was a software issue and thought of installing new ROM's but eventually my device was not detected :crying:
So i took it to repair shop near my house and they said it would cost 2500
I did some google research and found the reason was due to the power button being stucked during the fall.I got that repaired and my device is good to go
Click to expand...
Click to collapse
ok, took it into a shop, got the power button fixed. It must have been on the way out because literally one minute it worked and the second it didnt. now i think ive got it narrowed down. it's saying it's unable to mount /persist. ive tried the various fixes:
e2fsck/dev/block/platform/msm_sdcc.1/by-name/persist
and
make_ext4fs/dev/block/platform/msm_sdcc.1/by-name/persist
but all i get is a not found error. not sure what to do from here on.
success!! i ended up stumbling on a bit how to restore the persist partition i didnt try. got a custom rom installs and everything works. thanks to everyone who tried to help!!
stuck in bootloop while flashing cataclysm rom
i tried to flash cataclysm rom in my n5..i unlock bootloader, flash custom recovery using TWRP and flash cataclysm rom following the instructions in this thread http://forum.xda-developers.com/goo...s-5-how-to-unlock-bootloader-t2507905...after that it was stuck in bootloop...i tried to open recovery but it wont open anymore it will only go back to loop....how can open the recovery? is it safe to flash CWM recovery?..tnx in advance..
When it was stuck in the loop, I had to hold vol up and down with the power button (wait a few secs until it was completely off) then reboot holding down + power till it opened the bootloader. if that doesnt work, try reflashing the bootloader via fastboot. I only found out i couldnt mount the persist partition by looking at the terminal window in twrp after trying to install a rom which kept it in the boot loop. I then used the cmd: make_ext4fs /dev/block/platform/msm_sdcc.1/by-name/persist to rebuild it.
jpau11 said:
i tried to flash cataclysm rom in my n5..i unlock bootloader, flash custom recovery using TWRP and flash cataclysm rom following the instructions in this thread http://forum.xda-developers.com/goo...s-5-how-to-unlock-bootloader-t2507905...after that it was stuck in bootloop...i tried to open recovery but it wont open anymore it will only go back to loop....how can open the recovery? is it safe to flash CWM recovery?..tnx in advance..
Click to expand...
Click to collapse
After flashing TWRP, use the volume and power button to select recovery. Once in TWRP, wipe cache, data, reboot.
audit13 said:
After flashing TWRP, use the volume and power button to select recovery. Once in TWRP, wipe cache, data, reboot.
Click to expand...
Click to collapse
problems solved!!i flashed TWRP again and it it already to the recovery so i reflashed the cataclysm rom and it worked...my n5 is now working..tnx guys!
jpau11 said:
problems solved!!i flashed TWRP again and it it already to the recovery so i reflashed the cataclysm rom and it worked...my n5 is now working..tnx guys!
Click to expand...
Click to collapse
Great to hear it. Congratulations:good:
does anyone know how to fix this issue im having.i was on android 6.0 when trying to boot into twrp recovery would only have a black screen,only once in a blue moon it will boot into twrp regular.i updated to 7.0 thought it might fix the issue but it is the same .ive tried all the twrp versions through adb,but when booting into twrp just presented a black screen,ive tried factory reset,reflash firmware,still the same.The only way to get to twrp normal is to adb (fastboot/boot/twrp.img/,on my computer
You're doing MUCH better than i am. After loading twrp & making a backup, it appears the bootloader corupted when i tested it with the restore. Now, if i try & reboot, all it does is vibrate. If it's pluged in while rebooting, it'll vibrate & the red led blinks. In other words, hard bricked. I got 2 disney tickets offered to anyone who can un-hardbrick it. I've un bricked several Samsung's, but the Zp3ultra has me stumped. If i were you, i'd try reloading the original OS.
hillg001 said:
You're doing MUCH better than i am. After loading twrp & making a backup, it appears the bootloader corupted when i tested it with the restore. Now, if i try & reboot, all it does is vibrate. If it's pluged in while rebooting, it'll vibrate & the red led blinks. In other words, hard bricked. I got 2 disney tickets offered to anyone who can un-hardbrick it. I've un bricked several Samsung's, but the Zp3ultra has me stumped. If i were you, i'd try reloading the original OS.
Click to expand...
Click to collapse
Hey funny you should say that. I'm actually on my second Asus 3 ultra. The same thing happened to my first one got stuck during a firmware update, or corrupted firmware zip.,now the phone won't boot to twrp or bootloader, just vibrates like yours. If I plug the charging cord in vibrates then just get those red led notification light blinks,computer won't even recognize the device so can't flash the bootloader back to the phone to fix, so I guess it's hard bricked paperweight. I only had it for about a week before the brick, had to buy a new one. The thing that's funny to me the first one would boot to twrp no problem, now this new one seems to boot to twrp but just presented a black screen, it's in twrp recovery because you can feel the vibrations for the buttons, just can't see the screen. I would love to be able to fix the bricked one it's brand new, and can't send for warranty because I'm in the US, sucks.
If you have the address for the foreign country's location of manufacturing, you can send it in for repairs. That's what we are working on doing. The horrible thing is, after reading about stories of other customers, Asus really rakes you over the coals price wise for the repair, & then does similarly for return shipping. So we are still trying to find a way around the high shipping prices, at least.
.
gubbilo144 said:
does anyone know how to fix this issue im having.i was on android 6.0 when trying to boot into twrp recovery would only have a black screen,only once in a blue moon it will boot into twrp regular.i updated to 7.0 thought it might fix the issue but it is the same .ive tried all the twrp versions through adb,but when booting into twrp just presented a black screen,ive tried factory reset,reflash firmware,still the same.The only way to get to twrp normal is to adb (fastboot/boot/twrp.img/,on my computer
Click to expand...
Click to collapse
What stock keeping unit (SKU) is your phone? WW, TW, CN, or JP?
What version of TWRP did you flash?
hillg001 said:
You're doing MUCH better than i am. After loading twrp & making a backup, it appears the bootloader corupted when i tested it with the restore. Now, if i try & reboot, all it does is vibrate. If it's pluged in while rebooting, it'll vibrate & the red led blinks. In other words, hard bricked. I got 2 disney tickets offered to anyone who can un-hardbrick it. I've un bricked several Samsung's, but the Zp3ultra has me stumped. If i were you, i'd try reloading the original OS.
Click to expand...
Click to collapse
i got the same problem when i use TWRP to install the oldest rom from asus website UL-ASUS_A001-WW-13.6.6.17-user.zip, the installation completed but i got black screen the same signs like you did, i offer 50 Euros for those who could help me unbrick my zenfone ultra
thanks a lot in advance!!!
Cordially
CHUNG
qbchung said:
i got the same problem when i use TWRP to install the oldest rom from asus website UL-ASUS_A001-WW-13.6.6.17-user.zip, the installation completed but i got black screen the same signs like you did, i offer 50 Euros for those who could help me unbrick my zenfone ultra
thanks a lot in advance!!!
Cordially
CHUNG
Click to expand...
Click to collapse
i think the mistake people may be making is flashing stock rom through twrp
twrp only for supersu zip and other things imo
stock rom just flash through the stock recovery apply update from sd (microsd card) need to make sure the recovery and rom match
can you get to stock recovery? also charge it first to a good 80 to 90 if not 100 percent
gubbilo144 said:
does anyone know how to fix this issue im having.i was on android 6.0 when trying to boot into twrp recovery would only have a black screen,only once in a blue moon it will boot into twrp regular.i updated to 7.0 thought it might fix the issue but it is the same .ive tried all the twrp versions through adb,but when booting into twrp just presented a black screen,ive tried factory reset,reflash firmware,still the same.The only way to get to twrp normal is to adb (fastboot/boot/twrp.img/,on my computer
Click to expand...
Click to collapse
After you get that black screen, just press once the power button to close and then press it again to open, just like you do when you normally close and open the screen. You will see after that the twrp interface.
qbchung said:
i got the same problem when i use TWRP to install the oldest rom from asus website UL-ASUS_A001-WW-13.6.6.17-user.zip, the installation completed but i got black screen the same signs like you did, i offer 50 Euros for those who could help me unbrick my zenfone ultra
thanks a lot in advance!!!
Cordially
CHUNG
Click to expand...
Click to collapse
read your post again...noticed...
one thing-if you were on ww-14 i.e. android nougat then cannot simply flash the ww 13 marshmallow as I believe the bootloader is different - think that is why the flash did not work (know this from other zenfone forums where you cannot simply downgrade by flashing a previous android level rom) if it was not a case of downgrading then maybe because of using twrp for stock rom instead of the update process using stock recovery
I tried to flash ww 13 when on ww 14 through stock recovery and it was giving me an error (saying version is not ww which was not the case anyway)-found out through other forums that it is because one cannot downgrade in that manner - therefore I think cause of flash error is the bootloader version. For downgrading one needs the raw file. I found raw file for our ultra (WW13 level) at a Vietnamese site and the flashing tool but have not tried it (no reason to) but am keeping it just in case.
you can get stock recovery from here (note the ww 13 or ww 14 types pick the right one)
https://mega.nz/#F!9tEj2azZ!QKmvc-VJZR1Iqk6H7alQnQ
flash it through fastboot
need to have fastboot drivers installed
https://developer.android.com/studio/releases/platform-tools
or
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
make sure path variable has fastboot folder in it in environment variables of computer
preferably have recovery image in that folder too so you don't have to type some long path names
power off
volume up press and hold then press power
get to bootloader fastboot mode
connect by usb
open command prompt window in folder where fastboot installed
check fastboot devices to verify phone is seen
filename.img = filename of the twrp.img
twrp flash recovery filename.img
if successful then
twrp boot filename.img
may have to press power or volume up to get to the screen
while in stock recovery better to do factory reset too before update
then apply update from sd card
btw I have successfully used the twrp march version 3.2.1 (also at the above mega link) with the latest stock ww 14 (from jan 8 2018) backed up restored successfully, rooted, and have xposed as well
a note on twrp restore if ever having to (just don't check system image restore in twrp when restoring)
trying to do miui port
Can anyone help me???My device isn't opening after twrp flashing.when I reboot I see dark screen,not twrp recovery... please somebody help me,fast.....
Same problem with my iball tablet
Even flashing stock recovery doesn't give me recovery back i have also tried philz recovery but no luck i need help too