Related
After wandering around looking for an android build of the file command, I finally went ahead and compiled it myself.
The attached package contains the file binary (v5.11), the libmagic.so shared library, the associated magic files and the build specific files that I needed (over and above the source) to build it. The paths of the files are relative to '/'.
Refs:
source: file website (www_darwinsys_com/file/)
compiling: Native Vim on Android (gdr_geekhood_net/gdrwpl/vim-android.php)
Note: Add the location of libmagic.so to LD_LIBRARY_PATH to get rid of the "CANNOT LINK EXECUTABLE" error. (I use /data/local/lib)
Compiled a dynamically linked library and associated binary instead of the monolithic binary built earlier.
samveen said:
After wandering around looking for an android build of the file command, I finally went ahead and compiled it myself.
The attached package contains the file binary (v5.11), the libmagic.so shared library, the associated magic files and the build specific files that I needed (over and above the source) to build it. The paths of the files are relative to '/'.
Refs:
source: file website (www_darwinsys_com/file/)
compiling: Native Vim on Android (gdr_geekhood_net/gdrwpl/vim-android.php)
Note: Add the location of libmagic.so to LD_LIBRARY_PATH to get rid of the "CANNOT LINK EXECUTABLE" error. (I use /data/local/lib)
Click to expand...
Click to collapse
I followed your instructions and it works perfectly.
Code:
$ echo $LD_LIBRARY_PATH
/data/local/lib:/data/local/lib:/data/local/lib:/system/lib:/vendor/lib
$ file
Usage: file [-bchikLlNnprsvz0] [--apple] [--mime-encoding] [--mime-type]
[-e testname] [-F separator] [-f namefile] [-m magicfiles] file ...
file -C [-m magicfiles]
file [--help]
$ getprop | grep device
[ro.cm.device]: [jordan]
[ro.product.device]: [umts_jordan]
I have been looking for this for a while. Man!! This post needs some serious attention. Great work.
Sent from my MB525 usiIng XDA
@samveen Any chance you could compile it with libmagic statically linked again to make it portable? Thanks for your time.
osm0sis said:
@samveen Any chance you could compile it with libmagic statically linked again to make it portable? Thanks for your time.
Click to expand...
Click to collapse
@osm0sis Sure. I'll add in a statically linked binary, but it'll take a little time (2-3 days).
samveen said:
@osm0sis Sure. I'll add in a statically linked binary, but it'll take a little time (2-3 days).
Click to expand...
Click to collapse
I was just looking for this. Great tool.
Thanks for your work.
samveen said:
@osm0sis Sure. I'll add in a statically linked binary, but it'll take a little time (2-3 days).
Click to expand...
Click to collapse
Any luck? I think it only needs libmagic statically linked to be portable; the other NDK/Bionic stuff can probably stay dynamic to keep the filesize down. I see file 5.17 source is available now too if you wanted to update your builds to the latest.
osm0sis said:
Any luck? I think it only needs libmagic statically linked to be portable; the other NDK/Bionic stuff can probably stay dynamic to keep the filesize down. I see file 5.17 source is available now too if you wanted to update your builds to the latest.
Click to expand...
Click to collapse
If you want only the system file type, the workaround i use is this (eval $(/sbin/blkid /dev/block/mmcblk0p11 | /sbin/awk ' { print $3 } '); /sbin/busybox echo $TYPE)
In a script just add a var like this
TYPE=$(eval $(/sbin/blkid /dev/block/mmcblk0p11 | /sbin/awk ' { print $3 } '); /sbin/busybox echo $TYPE) and you will have the FS type in $TYPE.
Phone: Samsung Galaxy SII - GT-I9100
Kernel: Dorimanx kernel v10.43v99-mv3
1st ROM : SlimSaber 4.4.2 Maliv3 by fusionjack build of 20140320 (Online)
2nd ROM :
MODEM: UHMS1
MODS: Partition Fix, Hue Blue v4.4 by Kroz :good:
Computoncio said:
If you want only the system file type, the workaround i use is this (eval $(/sbin/blkid /dev/block/mmcblk0p11 | /sbin/awk ' { print $3 } '); /sbin/busybox echo $TYPE)
In a script just add a var like this
TYPE=$(eval $(/sbin/blkid /dev/block/mmcblk0p11 | /sbin/awk ' { print $3 } '); /sbin/busybox echo $TYPE) and you will have the FS type in $TYPE.
Click to expand...
Click to collapse
Interesting but nope; I need file to determine a filetype. Compressed archives via a script, to be specific.
@osm0sis I got the code compiled (both with a dynamic libmagic.so, and libmagic compiled into file) but I need a little more time to compile the magic data (it requires running file on the target device to compile the magic data into a binary datafile). Once I have that figured out (either by compiling it or by creating a script to allow the users to do it themselves, I'll post it all in one go (need one more day).
samveen said:
@osm0sis I got the code compiled (both with a dynamic libmagic.so, and libmagic compiled into file) but I need a little more time to compile the magic data (it requires running file on the target device to compile the magic data into a binary datafile). Once I have that figured out (either by compiling it or by creating a script to allow the users to do it themselves, I'll post it all in one go (need one more day).
Click to expand...
Click to collapse
Awesome! Thanks so much. The magic file isn't terribly important since you can grab one a lot of places and specify it with the -m parameter; keeps the file size down too if you were thinking of including it in the binary somehow!
Alright. I just wanted to thank you again for your work but I managed to make a static native compile (~440kb) of file-5.17 using my N7 and a kbox build environment I set up. It's available in my ARM Android Image Kitchen linked in my sig. Cheers!
osm0sis said:
Alright. I just wanted to thank you again for your work but I managed to make a static native compile (~440kb) of file-5.17 using my N7 and a kbox build environment I set up. It's available in my ARM Android Image Kitchen linked in my sig. Cheers!
Click to expand...
Click to collapse
@osm0sis - Can you please share how did you static compile this? I have setup the Ubuntu 13.10 image on Android using Complete Linux Installer (with all the necessary build tools setup).
I am able to compile this, but it's linking the shared library "libmagic.la".
Need to pass --static to ./configure and have a cross compiler set up, for ARMv7.
ericlnu said:
Need to pass --static to ./configure and have a cross compiler set up, for ARMv7.
Click to expand...
Click to collapse
I don't think that's a valid option.
Code:
$ ./configure --static
configure: error: unrecognized option: `--static'
Try `./configure --help' for more information
amit.bagaria said:
I don't think that's a valid option.
Code:
$ ./configure --static
configure: error: unrecognized option: `--static'
Try `./configure --help' for more information
Click to expand...
Click to collapse
Nope, seems not ^_^. Sorry, it usually is with autoconf derived configure scripts.
amit.bagaria said:
@osm0sis - Can you please share how did you static compile this? I have setup the Ubuntu 13.10 image on Android using Complete Linux Installer (with all the necessary build tools setup).
I am able to compile this, but it's linking the shared library "libmagic.la".
Click to expand...
Click to collapse
Haven't tried it using a full Linux image on Android, just made it native compile in KBox2 on my N7'13 for awhile by editing in the gettext functions it was complaining about, and have since moved on to cross-compiling on my Windows 7 desktop in Cygwin using the NDK. There were still a few tricks to getting it to be a true static compile. It's all linked in my post here:
http://forum.xda-developers.com/showthread.php?p=54510825
My latest compile included in my AIK-mobile package is file 5.20. :good:
I don't suppose you could do a quick compile with the -fPIE flag? Trying to use this on 5.0 + and don't want to patch my linker.
Tried to compile it myself (it sort-of worked, file --version is operational) but when I try to actually use it for something my terminal borks out and switches to some weird font after about 20 warnings. (configure also seems to be using the -rpath flag apparently, linker complains about it) hmm
EDIT: I've got it working after some trial and error. If anyone requests I'll post it
EDIT 2: android 6.0's linker seems less forgiving than 5.0/5.1, need to compile without -rpath (so no just using ./configure) will keep posted
Can you please post the file binary you built with -pie ?
What is DeltaJen?
DeltaJen is a tool for quickly making an incremental update based on two update zips. It is simple to use, and easy to extend for devices that don't use a straight up method of flashing a rom.
Click to expand...
Click to collapse
Why should I use it?
Have you ever hated having to download a full rom just to do a simple update? This tool can take a 200mb rom, take out all the changes, and squish the final package to less than 10mb.
Click to expand...
Click to collapse
But what if I use CWM instead of TWRP?
No issues here. DeltaJen produces updates that even your stock recovery can apply.
Click to expand...
Click to collapse
The Geeky parts
The script uses two binaries to efficiently build an update zip. bsdiff and imgdiff. bsdiff can also be replaced by the python module bsdiff4.
No threading or multiprocessing is used currently. as it stands, barely any cpu is used, so threading will be a huge bonus.
Hooks have been added to allow you to easily change how the script adds files, or to add extra lines in the updater-script
Click to expand...
Click to collapse
How do I use this?
For a straight update zip, which has no extra files or scripts other than what is in /system and boot.img, you run this.
Note that this will change when I update the cli function.
Code:
python DeltaJen.py -b <base_zip> -i <new_zip> -o <output_zip>
# Or from python
from DeltaJen import DeltaJen
dj = DeltaJen("<old_zip.zip>", "<new_zip.zip>", "<output_zip.zip>")
dj.generate()
Click to expand...
Click to collapse
I want to include this in the build steps of a custom rom
I'm working on it for a team already
Click to expand...
Click to collapse
Requirements
Linux (untested on OSX but should work)
python 2.7 or python 3.2+ (all other versions are untested and may not work)
imgdiff (supplied below or build from source)
bsdiff (sudo apt-get install bsdiff) or python module bsdiff4 (sudo pip install bsdiff4)
at least 500mb free ram (sorry, it dumps the files to ram. sorting it out soon).
Click to expand...
Click to collapse
It does NOT fully support windows yet, due imgdiff not supporting it. You can still run it, but it will only use bsdiff
More detailed instructions will be included soon, and the docs will be improved.
If you want direct help/to contribute/generally chat, come on down to the freenode channel #CyboLabs
last but not leased.
The source
XDA:DevDB Information
DeltaJen, Tool/Utility for all devices (see above for details)
Contributors
cybojenix, @GermainZ
Version Information
Status: Alpha
Created 2014-08-06
Last Updated 2014-08-09
Reserved
Dependencies
Linux
Python
bsdiff or bsdiff4
imgdiff
DeltaJen
Windows
Python
bsdiff or bsdiff4
imgdiff
DeltaJen
System Requirements
A supported OS
Enough ram to hold both zips (two 100mb zips would need 200+mb ram)
Enough storage to hold both zips
Amazing work mate!
I guess that ROM is SlimRoms. Would be glad to see this kinda awesomeness in Slim.
OMG, another @cybojenix project!!! :victory:
Have become your fan lately...
updates
automatic system and boot info detection has been added, the script is less verbose, and you can execute it directly now.
Documentation still to come
Superb Work Cybojenix
You Rock sir
kudos to @GermainZ for the massive help with cleaning up documentation.
wiki on github is in progress to aid you all.
Woow, nice work man
Any chance this project can be combined with CyanDelta for CM or OpenDelta in OmniROM?
It would be really nice if Cyan/OpenDelta downloads the differential update but creates a small update.zip only containing changed files instead of creating the latest complete ROM zip file.
klenamenis said:
Any chance this project can be combined with CyanDelta for CM or OpenDelta in OmniROM?
It would be really nice if Cyan/OpenDelta downloads the differential update but creates a small update.zip only containing changed files instead of creating the latest complete ROM zip file.
Click to expand...
Click to collapse
CyanDelta: I can't comment on because I've seen no documentation from them, nor can I get access to one of their final delta's.
OpenDelta: basically, DeltaJen and OpenDelta have two entirely different methods of working. Omni is wanting a system that will ensure the output is exactly the same every time, and not fail if the system has been modified (a zip is built and the system is flattened before applying)
This looks great.
I did a quick test using my windows system, running the script gave me the following output.
Code:
C:\Download\DeltaJen>python DeltaJen.py -b SlimSaberKat-jflte-4.4.4-2
-i SlimSaberKat-jflte-4.4.4-20140807.zip -o update_zip
WARNING: boot information not supplied.
MTD boot info found
patching system/priv-app/BackupRestoreConfirmation.apk: 1 of 95
Traceback (most recent call last):
File "DeltaJen.py", line 716, in <module>
cli()
File "DeltaJen.py", line 702, in cli
dj.generate()
File "DeltaJen.py", line 469, in generate
self.create_patches(to_diff)
File "DeltaJen.py", line 378, in create_patches
p_data = self.compute_diff(b_file, n_file)
File "DeltaJen.py", line 584, in compute_diff
if not bs_diff:
NameError: global name 'bs_diff' is not defined
Any tips on what I did wrong
kantjer said:
This looks great.
I did a quick test using my windows system, abd have the following output.
Code:
C:\Download\DeltaJen>python DeltaJen.py -b SlimSaberKat-jflte-4.4.4-2
-i SlimSaberKat-jflte-4.4.4-20140807.zip -o updte_zip
WARNING: boot information not supplied.
MTD boot info found
patching system/priv-app/BackupRestoreConfirmation.apk: 1 of 95
Traceback (most recent call last):
File "DeltaJen.py", line 716, in <module>
cli()
File "DeltaJen.py", line 702, in cli
dj.generate()
File "DeltaJen.py", line 469, in generate
self.create_patches(to_diff)
File "DeltaJen.py", line 378, in create_patches
p_data = self.compute_diff(b_file, n_file)
File "DeltaJen.py", line 584, in compute_diff
if not bs_diff:
NameError: global name 'bs_diff' is not defined
Any tips on what I did wrong
Click to expand...
Click to collapse
Ah, line 44 should be 'bs_diff = None'
On windows, you must have the python bsdiff4 installed btw
cybojenix said:
Ah, line 44 should be 'bs_diff = None'
On windows, you must have the python bsdiff4 installed btw
Click to expand...
Click to collapse
I have bsdiff4-1.1.4.tar.gz extracted to the folder containing the script and python but that clearly isn't the way to go.
Code:
ERROR: python bsdiff4 is required for windows
kantjer said:
I have bsdiff4-1.1.4.tar.gz extracted to the folder containing the script and python but that clearly isn't the way to go.
Code:
ERROR: python bsdiff4 is required for windows
Click to expand...
Click to collapse
you need to compile it as it has c parts.
try this http://www.lfd.uci.edu/~gohlke/pythonlibs/#bsdiff4
@cybojenix
A good piece of code & nice idea! Just one suggestion - can you please try xdelta (based on VCDIFF) instead of bsdiff?? In MDL, we have a very good result by using it, both in terms of memory & speed. AFAIK, CyanDelta also uses it. If you want a Python wrapper, then see here.
Best of luck!!
Titokhan said:
@cybojenix
A good piece of code & nice idea! Just one thought - can you please try xdelta (based on VCDIFF) instead of bsdiff?? In MDL, we have a very good result by using it, both in terms of memory & speed. AFAIK, CyanDelta also uses it. If you want a Python wrapper, then see here.
Best of luck!!
Click to expand...
Click to collapse
the issue with xdelta is it won't support recovery out the box. I've considered running a script to apply them manually (obviously only to replace bsdiff for now), but I won't be doing it at this stage.
cybojenix said:
you need to compile it as it has c parts.
try this http://www.lfd.uci.edu/~gohlke/pythonlibs/#bsdiff4
Click to expand...
Click to collapse
Thanks, but the installer is complaining python 3.4.1 needs to be installed but can't be found in the registry.
I have reinstalled python 3.4.1 using the.msi but still the same error.
kantjer said:
Thanks, but the installer is complaining python 3.4.1 needs to be installed but can't be found in the registry.
I have reinstalled python 3.4.1 using the.msi but still the same error.
Click to expand...
Click to collapse
what can I say, windows sucks
cybojenix said:
what can you say, windows sucks
Click to expand...
Click to collapse
I will try it tomorrow on my linux build machine.
That's where I want to have it running eventually.
Great work :good:
Congratulations my friend.
(Check out https://www.python.org for information on what python is.)
Yes you read that correctly, static python for Android! It took a while to figure out how to get this compiled, but I finally did it. I present you with an installer and a little bit of testing. The second post contains information on compilation and the sources. Btw, any cool python scripts are welcomed!
INSTALLATION
Recovery flash installers are attached that will install python 2.7.9 and/or 3.4.2 to /system/pythonX.X.X. You can install both if you want. Installation size is about 41MB, 43MB, and 49MB respectively for python 2.7.8, python 2.7.9, and python 3.4.2.
After installation, the python director(ies) in /system will contain the static python binary, some scripts, and a bunch of modules and documents. Separate scripted executables will be installed to /system/bin/python or /system/bin/python3 depending on which one is installed. These basically just set the PYTHONHOME environment variable and execute the python binary.
TESTING
When you boot up to Android after installation, you should be able to just open up a terminal and fire off some python commands.
Test using python 2.7.9:
Code:
python -c 'print "Hello World!"'
Test using python 3.4.2:
Code:
python3 -c 'print("Hello World!")'
You can also write scripts shelled with python:
Code:
#!/system/bin/python
print "Hello World!"
Make sure to set them as executable with "chmod +x".
Adjust your screen brightness via /sys (root required, tested on Galaxy Nexus):
Code:
python -c 'f=open("/sys/devices/omapdss/display0/backlight/s6e8aa0/brightness","w"); f.write("40"); f.close()'
A cool script I made to tweak file system I/O like rq_affinity, rotational, etc for I/O blocks:
Code:
#!/system/bin/python
import os,re,sys
list=[]
# find all directories containing rq_affinity
for roots, dirs, files in os.walk('/sys'):
for file in files:
match=re.search(r'\S+/rq_affinity',os.path.join(roots,file))
if match:
list.append(match.group().replace('rq_affinity',''))
# write specific values to files in each directory found before
for dir in list:
for name in 'rq_affinity', 'rotational', 'read_ahead_kb', 'nr_requests', 'iostats', 'nomerges', 'add_random':
try:
f=open(dir+name,'w')
if name is 'rq_affinity': f.write('1')
elif name is 'read_ahead_kb': f.write('512')
elif name is 'nr_requests': f.write('512')
else: f.write('0')
f.close()
except IOError:
sys.stderr.write('Problem writing to ' + dir+name + '\n')
Or execute "python" or "python3" without any parameters to open up the interpreter and go from there. When you start for example "python" (python 2.7.8), you should see something like:
Code:
Python 2.7.8 (default, Dec 2 2014, 05:15:18)
[GCC 4.9.1] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>>
***I haven't fully tested this yet, so let me know how it goes. I know basic commands work, but there are still some complexities in the compilation that may need to be figured out.***
(update) -- Install Extra Packages/Modules via "easy_install" -- (root required)
1) In a shell, remount /system read-writable with:
Code:
mount -o remount,rw /system
2) Change directory to /system/pythonX.X.X, i.e.,
Code:
cd /system/pythonX.X.X
3) Execute easy_install followed by a package name, i.e.,
Code:
./easy_install [i]package_name[/i]
4) Let it download and install! Then test it out.
5) Remount /system read-only with:
Code:
mount -o remount,ro /system
Also, to remove a package, execute:
Code:
./easy_install -m [i]package_name[/i]
rm -r ../lib/pythonX.X/site-packages/[i]package_name[/i]*.egg
*** Flashing the resolv.conf patch may be required to make an internet connection to download modules.
Also, a few things need to be done to get easy_install working:
1) For python 2.7.8 or 2.7.9 you need to link python2.7 to python like this:
Code:
ln -s /system/python2.7.9/bin/python2.7 /system/python2.7.9/bin/python
I'll make sure this is automatically done in future installs.
2) SSL certificates need to be added to "/etc/pki/tls/certs/" to use SSL with easy_install.
Code:
mkdir -p /etc/pki/tls/certs
curl http://curl.haxx.se/ca/cacert.pem -o /etc/pki/tls/certs/ca-bundle.crt
ISSUES
The python installations have the following modules compiled in with external dependencies such as libraries not included at this point:
Code:
--------------PYTHON 2.7.8-2.7.9----------------------
_hashlib _multiprocessing _ssl
_testcapi bz2 crypt
dbm
Code:
--------------PYTHON 3.4.2-----------------------------
_crypt _dbm _decimal
_hashlib _multiprocessing _ssl
_testcapi
I will look into this more.
As @bubbleguuum points out, name resolution with python 3.4.2's urllib wasn't working. I found a workaround by adding the line
Code:
options single-request-reopen
to /system/etc/resolv.conf. This still needs some testing but seemed to work for me. I've included a recovery flash zip to patch /system/etc/resolv.conf if the line is not there since this is a root operation.
UPDATES
* 2014-12-02 * Compiled in more modules for each installation. This makes the installation a bit bigger, but it's worth it. You get a more complete python! To get stuff like help functions and math and readline modules, you need the larger installations linked below under "DOWNLOADS".
* 2014-12-03 * Thanks @cybojenix for pointing out some incapatibility issues with the original edify installer I was using. I have now updated the installers to use SuperSU's great non-edify sh-script installer.
* 2014-12-05 * Some updates to the installers to include more modules, plus size reduction for python 3.4.2. Modules added to python 2.7.8 : _bsddb _ctypes, _ctypes_test, _hotshot, _json, _lsprof, _sqlite3, future_builtins, and ossaudiodev, easy_install, pip(broken for now). Modules added to python 3.4.2: _bz2, _ctypes, _ctypes_test, _gdbm, _json, _lsprof, _opcode, _sqlite3, _testbuffer, _testimportmultiple, ossaudiodev, xxlimited
* 2014-12-05 * Some big updates to the installer to include almost the rest of the modules that wouldn't compile. Also easy_install is working on my end with these new experimental builds. With a little effort, should be able to get pip working as well. I had to use some hacky flags to get it to compile, ignore unresolved-symbols and such, so it definitely needs some testing. Another thing I did was tweak the install script to write over previous installations from these installations. I recommend downloading the experimental builds if you read this. The worst thing that might happen is one of the new modules I've included won't work completely.
* 2014-12-14 * Added python 2.7.9. Trimmed the installation sizes down to the much more reasonable 41MB, 43MB, and 49MB respectively for python 2.7.8, python 2.7.9, and python 3.4.2.
* 2014-12-24 * Attached a recovery flash.zip to patch resolv.conf to try and fix a urllib name resolution error.
* 2014-12-26 * A couple updates: Tweaked python installations so that modules looks for "/system/bin/sh" instead of "/bin/sh" when needed. Also a few "#!" corrections for scripts in the python bin directory. This shouldn't break anything from what I've tested, only make Android python more capable, but I'll keep the old installations attached for now just in case since the modifications involved using "sed". The second update is nice. I've added a little section on installing extra modules with easy_install(included and working with all installations).
Compiling
The environment I compiled in was a debian "wheezy" image mounted as a loop device on Android. The reason I compile this way is so I have full access to the arm environment tools, gcc compiler, etc. without having to go through the trouble of using a cross-compiler (which doesn't work in this case from my testing with uClibc, or eglibc. Code sourcery's might work but I didn't feel like booting an x86 linux installation to try). You can recreate the same environment pretty easily by using either Complete Linux Installer or Linux Deploy apps. I use both.
To get a static python compiled, I first downloaded the following packages with APT:
Code:
[i]apt-get build-dep python python3[/i]
build-essential gcc make # building tools
binutils-gold # awesome gold linker
zlib1g-dev # zlib
libreadline-dev, libncurses5-dev # readline, curses
libbz2-dev # bz2
libsqlite3-dev # sqlite3
python-bsddb3, python3-bsddb3
libgdbm-dev # gdb
libssl-dev # ssl
python-tk, python3-tk # tkinter
libdb-dev # db
python-gdbm python-bsddb3
libffi-dev # _ctypes
tcl8.6-dev # tkinter
libx11-dev # tkinter
libmpdec-dev # decimal
Then I manually installed binutils-gold by unpacking the rpm for armv7h (this isn't available with APT yet). You can get it here though. (Update: this should be available in the debian repositories now.)
For static compilation, you need to make some changes to Modules/Setup from the python source directory. Specifically, you need to add
Code:
*static*
to the top of the file. Then you need to uncomment any commented modules you would like compiled in. When you compile and see a list of failed modules, search for each of these in Modules/Setup and uncomment them. For example, change
Code:
#math mathmodule.c _math.c
to
Code:
math mathmodule.c _math.c
. Then recompile. There may be some shared dependencies and packages as well you need to figure out to get them to compile. Take a look at the attached "Setup" files for more detail.
The actually compile steps look like this:
(1)
Code:
./configure --build=arm --prefix="$PWD"/out LDFLAGS="-static -static-libgcc -Wl,--unresolved-symbols=ignore-all -Wl,--export-dynamic" CPPFLAGS=-static CXXFLAGS=-static CFLAGS="-Os -static" LDFLAGS=-static LD=ld.gold
(2) Modify the Modules/Setup file.
(3)
Code:
make clean; make install
After compiling, there are some things you can do to make your installation in "./out" smaller. Strip the large binaries in "out/bin", i.e.
Code:
strip -s ./out/bin/python2.7
Also remove the python archive library, *.o's, etc. with:
Code:
make clean
This might seem kind of weird, but it works and cleans out unnecessary files from your installation.
**Make sure to backup your Modules/Setup file if you run "make distclean". I lost my 3.4.2 Modules/Setup file after doing this. :silly: Now I gotta recreate it, dammit.
**I should also mention that compile time is very fast given the amount of data generated. It takes about 10 minutes to get python and all it's modules compiled on my Galaxy Nexus.**
:EDITS:
: Updated some configure parameters. Removed unnecessary, extra "./configure". Also added some updates to the included "Setup" files.
: Hacky update to "./conifgure" to ignore unresolved symbols, export dynamic. This allows certain modules to be compiled which have shared dependencies.
: Update to trimming down the installation size after "make". Use another "make clean".
Downloads - Extract in the source directory
Setup (python 2.7.8)
Setup (python 3.4.2)
Setup (Experimental) (python 2.7.8)
Setup (Experimental) (python 3.4.2)
Something that would be interesting to look in to would be to have pip/easy_install running, so you can install extra non c packages onto the sdcard/data/wherever.
Would you also consider opening up the sources please? There is a project I'm interested in doing involving python on Android, however a lack of time meant I couldn't finish building it.
Give me a shout if you need anything. I hope to see even more come out of this thread
Edit:
I've just looked at the updater-script. The mount command won't work on the majority of devices. Can you turn the update-binary in to a shell script please? See the SuperSU updater for reference
cybojenix said:
Something that would be interesting to look in to would be to have pip/easy_install running, so you can install extra non c packages onto the sdcard/data/wherever.
Would you also consider opening up the sources please? There is a project I'm interested in doing involving python on Android, however a lack of time meant I couldn't finish building it.
Give me a shout if you need anything. I hope to see even more come out of this thread
Edit:
I've just looked at the updater-script. The mount command won't work on the majority of devices. Can you turn the update-binary in to a shell script please? See the SuperSU updater for reference
Click to expand...
Click to collapse
Thanks for your reply! I've changed the installer to use SuperSU's no-edify sh-scripted updater. I tested on my device, but let me know if there are any issues though. I kept it pretty basic.
I added some stuff on the source modifications and compilation to the 2nd post. The only file I've actually modified so far in the source is the generated Modules/Setup file, and I've included the one I used for python 2.7.8. Unfortunately, I over-cleaned the python 3.4.2 directory, which deleted my modified Modules/Setup there, so I'll have to add it later when I re-edit it.
That's a great idea on pip/easy_install. I did download the pip_installer and tried out installing on the static python I made. Got some errors though pointing to a few modules I haven't gotten compiled into the static python installation (listed in the OP near the bottom, specifically _ctypes). I'll see what I can do about that. The line for compiling the module might just need to be added to Modules/Setup. Hopefully that's the case.
@7175
Thank you very much for these binaries.
There is however a problem: name resolution (DNS) doesn't seem to work at all (with both python 2 and 3 downloads).
All attempts to use urllib.request.urlopen('http://somehost.com') fail with "<urlopen error [Errno -2] Name or service not known>" (running python as root but it doesn't matter, and a rooted Nexus 4 running 4.4.4 stock ROM):
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/system/python3.4.2/lib/python3.4/urllib/request.py", line 153, in urlopen
return opener.open(url, data, timeout)
File "/system/python3.4.2/lib/python3.4/urllib/request.py", line 455, in open
response = self._open(req, data)
File "/system/python3.4.2/lib/python3.4/urllib/request.py", line 473, in _open
'_open', req)
File "/system/python3.4.2/lib/python3.4/urllib/request.py", line 433, in _call_chain
result = func(*args)
File "/system/python3.4.2/lib/python3.4/urllib/request.py", line 1202, in http_open
return self.do_open(http.client.HTTPConnection, req)
File "/system/python3.4.2/lib/python3.4/urllib/request.py", line 1176, in do_open
raise URLError(err)
urllib.error.URLError: <urlopen error [Errno -2] Name or service not known>
Click to expand...
Click to collapse
it works if replacing somehost.com by its ip address.
To reproduce above stack trace with python 3:
import urllib.request
urllib.request.urlopen('http://www.google.com')
while this work:
urllib.request.urlopen('http://173.194.45.229')
nslookup and general name resolution work anywhere else:
[email protected]:/ # nslookup www.google.com
nslookup wwwgoogle.com
Server: 8.8.4.4
Address 1: 8.8.4.4 google-public-dns-b.google.com
Name: wwwgoogle.com
Address 1: 2a00:1450:4007:80c::1014 par03s15-in-x14.1e100.net
Address 2: 173.194.45.242 par03s15-in-f18.1e100.net
Address 3: 173.194.45.240 par03s15-in-f16.1e100.net
Address 4: 173.194.45.244 par03s15-in-f20.1e100.net
Address 5: 173.194.45.241 par03s15-in-f17.1e100.net
Address 6: 173.194.45.243 par03s15-in-f19.1e100.net
Click to expand...
Click to collapse
This issue has probably something to do with how python was compiled to do name resolution. I remember vaguely a similar issue
on Ubuntu 12.04, with a ffmpeg compile that would always fail to resolve hostnames in URLs. No sure what the exact fix was but it had something to do with the libc and its name resolution mechanism. Or maybe something ipv6 related ?
@bubbleguuum : Thanks for checking out that important issue.
I did a little research and it seems there is some issue with DNS name resolution related to ipv6. I recompiled with "--disable-ipv6" and that seemed to fix the issue. I also found that adding the line
Code:
options single-request-reopen
to /etc/resolv.conf did the trick as well. Apparently this tells the resolver to use a new socket for ipv6 resolution instead of same one as ipv4. It thereby reduces wait-time as well. Maybe check on your end and see if that works. Otherwise I'll upload ipv4-only installations since this issue at least needs to be side-stepped.
EDIT: Hmm, looks like re-compiling with "--disable-ipv6" didn't fix the problem. Will have to look more into this issue and hold off on uploading ipv4-only python3 since it didn't fix it. In the meantime, I've attached a recovery flash.zip to the OP to add the above mentioned line to /system/etc/resolv.conf if needed, which seems to fix the issue for me.
7175 said:
@bubbleguuum : Thanks for checking out that important issue.
I did a little research and it seems there is some issue with DNS name resolution related to ipv6. I recompiled with "--disable-ipv6" and that seemed to fix the issue. I also found that adding the line
Code:
options single-request-reopen
to /etc/resolv.conf did the trick as well. Apparently this tells the resolver to use a new socket for ipv6 resolution instead of same one as ipv4. It thereby reduces wait-time as well. Maybe check on your end and see if that works. Otherwise I'll upload ipv4-only installations since this issue at least needs to be side-stepped.
Click to expand...
Click to collapse
Thank you for looking into this so fast.
My intended usage is for running the python binary from a regular non-root app (which works great!), so editing resolv.conf is not an option.
I've been researching that DNS resolving issue and could not find a clear explanation on why it fails on Android and not on other systems, and why exactly the added line in resolv.conf fixes (or rather workaround) it.
All seems to point to socket.getaddrinfo() failing for an unknown reason.
Is Python compiled with HAVE_GETADDRINFO defined ? If that's the case it uses the libc definition of getaddrinfo, otherwise
it uses an emulation function found in getaddrinfo.c.
My guess is that it is the latter, and what is causing this issue on Android.
It's probable this issue has already been solved on Android since other Python binaries exists, but Googling around do not give
much answer.
I get this error when trying to install anything with easy_install (using /system/python3.4.2/bin/easy_install-3.4 because /system/python3.4.2/easy_install doesn't seem to exist like in the OP):
Code:
# ./easy_install-3.4 feedparser
Searching for feedparser
Reading https://pypi.python.org/simple/feedparser/
Download error on https://pypi.python.org/simple/feedparser/: [Errno -2] Name or service not known -- Some packages may not be found!
Couldn't find index page for 'feedparser' (maybe misspelled?)
Scanning index of all packages (this may take a while)
Reading https://pypi.python.org/simple/
Download error on https://pypi.python.org/simple/: [Errno -2] Name or service not known -- Some packages may not be found!
No local packages or download links found for feedparser
error: Could not find suitable distribution for Requirement.parse('feedparser')
i got curl and the certs installed in /etc/pki/tls/certs/ as per instrucions in the OP, any help?
Thoughts on PIL?
Hmm... new problems here. Android Lollipop have no /system/etc/resolv.conf by-default and urllib patch is no more works.
How it can be fixed?
http://qpython.net/index.php
Where I can find source code and related documents for project
Pratik Raj said:
Where I can find source code and related documents for project
Click to expand...
Click to collapse
I would like to know the same, as well as what license it is under... Also, I don't care about the network, but does it work on Oreo? Also, do you think I could customise the installer to install to a non-system location (/tmp) so that my flashable zip can use python?
hackintosh5 said:
I would like to know the same, as well as what license it is under... Also, I don't care about the network, but does it work on Oreo? Also, do you think I could customise the installer to install to a non-system location (/tmp) so that my flashable zip can use python?
Click to expand...
Click to collapse
Idk about OP, but I can surely post my source for python 2.7 on arm/arm64. I compiled it like a year ago, but it wasn't too bad, just required a bunch of patches and code for dlopen
I just want to say thank you so much.
Hi everyone,
I've successfully built the Lineage Rom from Source. However after I flash the zip file from TWRP, the phone doesn't pass the Oneplus logo on the Bootloader, and the ROM doesn't start loading.
I asked for help on Lineage IRC and they suggested that I would use the OnePlus Binaries from TheMuppets. I did that and after a rebuild, the result was the same.
The fun part is that if I flash another Kernel (Bofella, for example) after I flash the Rom ZIP file, the ROM starts successfully.
Can you please guide me in the right direction?
Thanks a lot
It might be a kernel related problem
Hi,
After a discussion in the Lineage IRC, apparently the problem could be in the stat command, which is used while building the kernel. (check here the error from the logs: pastebin.com/0wsVy5zr)
Do you know the script that is responsible for calling that command? By the way, this is probably happening because I'm building on OSX.
Thanks
@idprophecy ,see if you can help this guy.
It might be kernel related problem as @nathsagar96 stated. I have no experience with mac, but from what I know stat differs in there (in its commands). It must be GNU stat, not other like BSD. Therefore be sure you have GNU stat installed (I think it is possible via homebrew and especially it is related to coreutils package). Also sorry If I am wrong. I haven't been mac user and I have never regarded this, but try to do this, it makes sense. We'll see.
No problems on Linux
idprophecy said:
It might be kernel related problem as @nathsagar96 stated. I have no experience with mac, but from what I know stat differs in there (in its commands). It must be GNU stat, not other like BSD. Therefore be sure you have GNU stat installed (I think it is possible via homebrew and especially it is related to coreutils package). Also sorry If I am wrong. I haven't been mac user and I have never regarded this, but try to do this, it makes sense. We'll see.
Click to expand...
Click to collapse
Hum, I searched and it seems that there is the GNU stat for Mac, but the name changes to gstat. This means that I'll have to change the scripts, so probably I'll prefer to use the "mac version" of
Code:
stat -c
, which should be
Code:
stat -f %z
I'll try it and let you know
Hi Guys,
Just to let you know. I changed the file of the oneplus kernel, in scripts/Makefile.lib:
from:
Code:
...
for F in $1; do
fsize=$$(stat -c "%s" $$F);
dec_size=$$(expr $$dec_size + $$fsize);
done;
...
To:
Code:
...
for F in $1; do \
fsize=$$(stat -f %z $$F); \
dec_size=$$(expr $$dec_size + $$fsize); \
done;
...
And then it compiled correctly and the rom started with no problems
What is ?
Android is the open-source operating system used for smartphones. Full Freedom for people using it
What is Source Code?
Android is an open-source software stack created for a wide array of devices with different form factors. The primary purposes of are to create an open software platform available for carriers, OEMs, and to make their innovative ideas a reality and to introduce a successful, real-world product that improves the mobile experience for users.The result is a full, production-quality consumer product with source code open for customization and porting.
So basically Allows to customize the things you like and make new things without any Restrictions. Cool isn’t it?
What is ROM ?
The ROM is the operating system. This is the User interface (Sense UI in HTC phones) and the file system for maintaining contacts etc. It is composed of a Linux kernel and various add-ons to achieve specific functionality.
What does a Rom Contain ?
Basically a Rom Contains following main things :
· Kernel
· Bootloader
· Recovery
· Radio
· Framework
· Apps
· core
· -runtime,Etc
Some Basics About Above Terms
Kernel :
A kernel is critical component of the and all operating systems. It can be seen as a sort of bridge between the applications and the actual hardware of a device. devices use the Linux kernel, but it's not the exact same kernel other Linux-based operating systems use. There's a lot of specific code built in, and Google's kernel maintainers have their work cut out for them. OEMs have to contribute as well, because they need to develop hardware drivers for the parts they're using for the kernel version they're using. This is why it takes a while for independent and hackers to port new versions to older devices and get everything working. Drivers written to work with the Gingerbread kernel on a phone won't necessarily work with the Ice Cream Sandwich kernel. And that's important, because one of the kernel's main functions is to control the hardware. It's a whole lot of source code, with more options while building it than you can imagine, but in the end it's just the intermediary between the hardware and the software. So basically if any instruction is given to mobile it first gives the command to kernel for the particular task execution.
Bootloader :
The bootloader is code that is executed before any Operating System starts to run. Bootloaders basically package the instructions to boot operating system kernel and most of them also have their own debugging or modification environment. Think of the bootloader as a security checkpoint for all those partitions. Because if you’re able to swap out what’s on those partitions, you’re able to break things if you don’t know what you’re doing. So basically it commands the kernel of your device to Boot the Device properly without any issues. So careful with bootloader since it can mess things very badly.
Recovery :
Recovery is defined in simple terms as a source of backup. Whenever your phone firmware is corrupted, the recovery does the job in helping you to restore or repair your faulty or buggy firmware into working condition. It is also used for flashing the Rom’s , kernel and many more things.
Radio
The lowest part of software layer is the radio: this is the very first thing that runs, just before the bootloader. It control all wireless communication like GSM Antenna, GPS etc.
What you’ll need
A relatively recent 64-bit computer (Linux, OS X, or Windows)(Virtual Machine will work as well) with a reasonable amount of RAM and about 100 GB of free storage (more if you enable ccache or build for multiple devices). The less RAM you have, the longer the build will take (aim for 8 GB or more). Using SSDs results in considerably faster build times than traditional hard drives.
A decent internet connection & reliable electricity
Some familiarity with basic operation and terminology. It would help if you’ve installed custom roms on other devices and are familiar with recovery. It may also be useful to know some basic command line concepts such as cd for “change directory”, the concept of directory hierarchies, that in Linux they are separated by /, etc.
Install the SDK
If you haven’t previously installed adb and fastboot, you can download them from Google. Extract it running:
Code:
unzip platform-tools-latest-linux.zip -d ~
Now you have to add adb and fastboot to your PATH. Open ~/.profile and add the following:
Code:
# add SDK platform tools to path
if [ -d "$HOME/platform-tools" ] ; then
PATH="$HOME/platform-tools:$PATH"
fi
Then, run source ~/.profile to update yur environment.
Install the build packages
Several packages are needed to build LineageOS. You can install these using your distribution’s package manager.
To build LineageOS, you’ll need:
bc bison build-essential curl flex g++-multilib gcc-multilib git gnupg gperf imagemagick lib32ncurses5-dev lib32readline-dev lib32z1-dev libesd0-dev liblz4-tool libncurses5-dev libsdl1.2-dev libssl-dev libwxgtk3.0-dev libxml2 libxml2-utils lzop pngcrush rsync schedtool squashfs-tools xsltproc zip zlib1g-dev
For Ubuntu versions older than 16.04 (xenial), substitute:
libwxgtk3.0-dev → libwxgtk2.8-dev
Java
Different versions of LineageOS require different JDK (Java Development Kit) versions.
LineageOS 14.1: OpenJDK 1.8 (install openjdk-8-jdk)
LineageOS 11.0-13.0: OpenJDK 1.7 (install openjdk-7-jdk)*
https://askubuntu.com/questions/761127/how-do-i-install-openjdk-7-on-ubuntu-16-04-or-higher
Create the directories
You’ll need to set up some directories in your build environment.
To create them:
Code:
mkdir -p ~/bin
mkdir -p ~//lineage
Install the repo command
Enter the following to download the repo binary and make it executable (runnable):
Code:
curl [url]https://storage.googleapis.com/git-repo-downloads/repo[/url] > ~/bin/repo
chmod a+x ~/bin/repo
Put the ~/bin directory in your path of execution
In recent versions of Ubuntu, ~/bin should already be in your PATH. You can check this by opening ~/.profile with a text editor and verifying the following code exists (add it if it is missing):
Code:
# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/bin" ] ; then
PATH="$HOME/bin:$PATH"
fi
Then, run source ~/.profile to update your environment.
Initialize the LineageOS source repository
Code:
cd ~//lineage
repo init -u [url]https://github.com/LineageOS/.git[/url] -b lineage-15.1
Download the source code
Code:
repo sync -c -f --force-sync --no-clone-bundle --no-tags --optimized-fetch --prune
Prepare the device-specific code
Code:
git clone [url]https://github.com/TheScarastic/android_device_xiaomi_msm8953-common[/url] -b lineage-15.1 device/xiaomi/msm8953
git clone [url]https://github.com/TheScarastic/android_device_xiaomi_tissot[/url] -b lineage-15.1 device/xiaomi/tissot
git clone [url]https://github.com/TheScarastic/proprietary_vendor_xiaomi[/url] -b lineage-15.1 vendor/xiaomi
git clone [url]https://github.com/Tissot-Development/android_kernel_xiaomi_tissot[/url] -b 8.1 kernel/xiaomi/msm8953
Turn on caching to speed up build
Code:
export CCACHE_DIR=./.ccache
ccache -C
export USE_CCACHE=1
export CCACHE_COMPRESS=1
prebuilts/misc/linux-x86/ccache/ccache -M 50G
Configure jack
Jack is the new Java compiler used when building LineageOS 14.1. It is known to run out of memory - a simple fix is to run this command:
Code:
export _JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
Make Clean Build
Code:
make clean
Initialize the build command
Code:
source build/envsetup.sh
Start Build
Code:
croot
brunch tissot
For More info:
https://source..com/source/requirements
https://wiki.lineageos.org/devices/cheeseburger/build
Thanks bro..
DGEEEK said:
Thanks bro..
Click to expand...
Click to collapse
Thany you for this guide! Will try this!
saski4711 said:
Thany you for this guide! Will try this!
Click to expand...
Click to collapse
:good:
Thanks for guide, btw what's the size of source code ?
prabhjot-singh said:
Thanks for guide, btw what's the size of source code ?
Click to expand...
Click to collapse
Around 20-25GB I think
Followed the above steps to the letter but I get an error right at the beginning:
Code:
ninja: error: 'kernel/xiaomi/msm8953/arch/arm64/configs/lineage_tissot_defconfig', needed by '/home/rossi/android/lineage/out/target/product/tissot/obj/KERNEL_OBJ/.config', missing and no known rule to make it
build/core/ninja.mk:151: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
make: Leaving directory '/home/rossi/android/lineage'
Current git broken? Any idea?
saski4711 said:
Followed the above steps to the letter but I get an error right at the beginning:
Code:
ninja: error: 'kernel/xiaomi/msm8953/arch/arm64/configs/lineage_tissot_defconfig', needed by '/home/rossi/android/lineage/out/target/product/tissot/obj/KERNEL_OBJ/.config', missing and no known rule to make it
build/core/ninja.mk:151: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
make: Leaving directory '/home/rossi/android/lineage'
Current git broken? Any idea?
Click to expand...
Click to collapse
Hello,
Don't use that kernel, as actually don't work properly in Xiaomi Mi A1. This error is caused because the file "lineage_tissot_defconfig" it's not named like that, exactly it's name is "tissot_defconfig", for your first build with lineage I recommend you to use the following sources, because are adapt for Lineage. Don't forget to use superuser privileges to compile, it avoids a lot of possible errors with normal user.
Device tree
Vendor
Kernel
Give thanks to user @ghpranav for sources :good:
Regards
black_arashi said:
Hello,
Don't use that kernel, as actually don't work properly in Xiaomi Mi A1. This error is caused because the file "lineage_tissot_defconfig" it's not named like that, exactly it's name is "tissot_defconfig", for your first build with lineage I recommend you to use the following sources, because are adapt for Lineage. Don't forget to use superuser privileges to compile, it avoids a lot of possible errors with normal user.
Device tree
Vendor
Kernel
Give thanks to user @ghpranav for sources :good:
Regards
Click to expand...
Click to collapse
Thanks for the info. I'm now past the error. Will take some time though since I'm building on my laptop :cyclops:
saski4711 said:
Thanks for the info. I'm now past the error. Will take some time though since I'm building on my laptop :cyclops:
Click to expand...
Click to collapse
Between 3 to 5h in modern pc, probably you will need between 7 to 10h in a laptop, depends on Nº of Cores and RAM, anyway, good luck in your first compilation :good:
black_arashi said:
Between 3 to 5h in modern pc, probably you will need between 7 to 10h in a laptop, depends on Nº of Cores and RAM, anyway, good luck in your first compilation :good:
Click to expand...
Click to collapse
Thx m8. Still no error. Compiling over night on single core to avoid throttling / overheating. :highfive:
saski4711 said:
Thx m8. Still no error. Compiling over night on single core to avoid throttling / overheating. :highfive:
Click to expand...
Click to collapse
Probably you will se a lot of "warning" don't apologice, it's normal, these warning issues is being solved during the compilation. Some info just in case
saski4711 said:
Followed the above steps to the letter but I get an error right at the beginning:
Current git broken? Any idea?
Click to expand...
Click to collapse
Rename tissot_defconfig to lineage_tissot_defconfig in arch/arm64/configs
Nice share brotherr :good:
Keep mia1 like the sky full of stars, so many custom rom :highfive::laugh:
Sent from my Xiaomi Mi A1 using XDA Labs
-Rhoby|™-Bugs said:
Nice share brotherr :good:
Keep mia1 like the sky full of stars, so many custom rom :highfive::laugh:
Click to expand...
Click to collapse
Thanks
Hello and thanks for the guide.
I am trying to build Dirty Unicorns 7.1.2 for tissot. I have downloaded kernel, vendor and device and repo synced DU n7x branch. I have also downloaded device_qcom_sepolicy and changed some files in device/xiaomi/tissot folder in order for the build to start normally. After 1.30 minutes of building i get this error
Code:
ninja: error: '/home/manoskav/du-tissot/out/target/product/tissot/obj/STATIC_LIBRARIES/bootctrl.msm8953_intermediates/export_includes', needed by '/home/manoskav/du-tissot/out/target/product/tissot/obj/EXECUTABLES/update_engine_sideload_intermediates/import_includes', missing and no known rule to make it
make: *** [build/core/ninja.mk:167: ninja_wrapper] Error 1
Maybe should i try n7x-caf branch or n7x is ok for tissot? Can anyone help me with the building process?
Thanks in advance.
mparmpas122321 said:
Hello and thanks for the guide.
I am trying to build Dirty Unicorns 7.1.2 for tissot. I have downloaded kernel, vendor and device and repo synced DU n7x branch. I have also downloaded device_qcom_sepolicy and changed some files in device/xiaomi/tissot folder in order for the build to start normally. After 1.30 minutes of building i get this error
Maybe should i try n7x-caf branch or n7x is ok for tissot? Can anyone help me with the building process?
Thanks in advance.
Click to expand...
Click to collapse
Hmm but seriously it's tougher bro because its bootctrl it need more configuration
I tried building for Tissot but I'm having this issue.
[email protected]:~/dos$ . build/envsetup.sh
including device/generic/car/vendorsetup.sh
including device/generic/mini-emulator-arm64/vendorsetup.sh
including device/generic/mini-emulator-armv7-a-neon/vendorsetup.sh
including device/generic/mini-emulator-x86_64/vendorsetup.sh
including device/generic/mini-emulator-x86/vendorsetup.sh
including vendor/discovery/vendorsetup.sh
[email protected]:~/dos$ brunch tissot
including vendor/discovery/vendorsetup.sh
build/core/product_config.mk:236: *** Can not locate config makefile for product "tissot". Stop.
build/core/product_config.mk:236: *** Can not locate config makefile for product "tissot". Stop.
No such item in brunch menu. Try 'breakfast'
[email protected]:~/dos$
Click to expand...
Click to collapse
Can anyone please help me out?
black_arashi said:
Hello,
Don't use that kernel, as actually don't work properly in Xiaomi Mi A1. This error is caused because the file "lineage_tissot_defconfig" it's not named like that, exactly it's name is "tissot_defconfig", for your first build with lineage I recommend you to use the following sources, because are adapt for Lineage. Don't forget to use superuser privileges to compile, it avoids a lot of possible errors with normal user.
Device tree
Vendor
Kernel
Give thanks to user @ghpranav for sources :good:
Regards
Click to expand...
Click to collapse
@black_arashi
Oh so ghpranav's repo has LOS source added into it? If so is there any Android Stock for all these?
Thanks