I'm not a noob. I'm a Super noob :crying: I just bricked my LGP690 trying to flash it with Unofficial Cyanogen Mod 10 . I was using ClocworkMod Recovery as per the video. But I was never able to boot the phone again. It just shows the lg logo. I tried to get into emergency mode and flash official LG firmware into it using this, but the flasing didn't succeed. Now I can't even get to emergency mode. The phone just shows the LG logo. PLEASE PLEASE PLEASE help me . I just dont want my phone to get bricked. I just want my phone back please help :crying:
:crying::crying::crying::crying::crying:
Check out this thread...i assume that u r able to enter fastboot mode...
forum.xda-developers.com/showthread.php?t=1827723
Sent from my Optimus One running PA 2.52 by ByteCode.
You could try asking herehttp://forum.xda-developers.com/showthread.php?t=1411500
We fixed it !!! unbricked LGP690
Thanks for your support guys It is fixed. Previously while using unbrick techniques from karandeedps post I was getting Error WParam : 100 LParam : 6 in KDZ . Actually while flashing the phone needs to be in emergency mode. In my case , I could connect the phone to the computer only in Emergency mode so when KDZ started it would restart the phone and it would not be able to get in Emergency mode. After about 36 hrs of tikering a simple idea struck me, well I was stupid not to use it initially .
I manually put the phone in Emergency mode as KDZ was unable to it by holding POWER + VOLUME DOWN + RETURN and voila there came the emergency mode and within a few minutes flashing was complete and the phone is alive again.....
This time I'll use the proper method as described in Unofficial LG Optimus Net Thread and see if it works .... If it doesn't ..... Well , I know I have a superb community to help me out ....
THANKS :laugh:
I Bricked My Phone It Won't Turn On No Lights No Recovery No LG Logo Nothing Computer Won't Recognize The Phone Please Help Me I Had CM9 Tried Flashing CM10 Failed Booting So I Used KDZ To Go Back To Stock And Failed So I Panicked And Removed The Battery It Won't Boot Up I Have A LG Optimus T
Samsung Has A Jig
Motorola Has A Factory Cable
LG Has? Anything Similar??
Sent from my SAMSUNG-SGH-T769 using xda premium
Jserrano56 said:
I Bricked My Phone It Won't Turn On No Lights No Recovery No LG Logo Nothing Computer Won't Recognize The Phone Please Help Me I Had CM9 Tried Flashing CM10 Failed Booting So I Used KDZ To Go Back To Stock And Failed So I Panicked And Removed The Battery It Won't Boot Up I Have A LG Optimus T
Samsung Has A Jig
Motorola Has A Factory Cable
LG Has? Anything Similar??
Sent from my SAMSUNG-SGH-T769 using xda premium
Click to expand...
Click to collapse
Are you able to get the phone to Emergency mode by holding power + volume up + back button. 3 days ago when I soft bricked it , I was able to see the LG logo (Mine is Optimus 690 , and I get your's is based on Optimus 500). If emergency is working then you may try this .
Do make sure to disable the LG modem in device manager after connecting it to PC.
No Emergency Mode No Lights No Recovery No LG Logo Nothing Computer Won't Recognize The Phone
Samsung Has A Jig
Motorola Has A Factory Cable
LG Has? Anything Similar?? Any Unbrick Tool/ Device By Or For LG Phones?
Sent from my SAMSUNG-SGH-T769 using xda premium
you need jtag, my friend. Contact connexion2005/mobiletechvideos.
Sent from my Nexus 7 using Tapatalk 2
Ok I Will Later Today I'm At School Now Had A Delayed Start Due To Snow I Will Contact Them At 5:30 Or 6 PM Central Time Zone USA Today
Sent from my SAMSUNG-SGH-T769 using xda premium
Jserrano56 said:
No Emergency Mode No Lights No Recovery No LG Logo Nothing Computer Won't Recognize The Phone
Samsung Has A Jig
Motorola Has A Factory Cable
LG Has? Anything Similar?? Any Unbrick Tool/ Device By Or For LG Phones?
Sent from my SAMSUNG-SGH-T769 using xda premium
Click to expand...
Click to collapse
try this , even if its not the same model, the software screen might come up. Nothing bad to try eh ! http://forum.xda-developers.com/showthread.php?t=1846750
Hope it works !
I'll Try As Soon As I Get Home
Sent from my SAMSUNG-SGH-T769 using xda premium
panchtatvam said:
try this , even if its not the same model, the software screen might come up. Nothing bad to try eh ! http://forum.xda-developers.com/showthread.php?t=1846750
Hope it works !
Click to expand...
Click to collapse
It Didn't But Thanks
Sent from my SAMSUNG-SGH-T769 using xda premium
panchtatvam said:
I'm not a noob. I'm a Super noob :crying: I just bricked my LGP690 trying to flash it with Unofficial Cyanogen Mod 10 . I was using ClocworkMod Recovery as per the video. But I was never able to boot the phone again. It just shows the lg logo. I tried to get into emergency mode and flash official LG firmware into it using this, but the flasing didn't succeed. Now I can't even get to emergency mode. The phone just shows the LG logo. PLEASE PLEASE PLEASE help me . I just dont want my phone to get bricked. I just want my phone back please help :crying:
:crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Can you post your method to install cwm
raiso said:
Can you post your method to install cwm
Click to expand...
Click to collapse
i'm confused ... you want to know to install cwm or wanna help me out ?
If the later then thanks , the issue is already fixed .
You have to us kdz to fixed your bricked phone
Sent from my LG-P690 using xda app-developers app
first i installed app chainfire 3d and installed its driver. then te phone restarted but didn't restart it stucked on lg lolgo.
then i searched net i was unable to do any thing then i opend factory mode by pressing and holding volume down+power buttons and cleared all chache,formatted sd card and then system too....
And now not just its not rebooting also factry mode is also not openingg plzzzz helppp :crying: :crying: :crying: :crying::crying:
helpp pleaseeee pleasee
Hi, thank you for issued XDA Assist. Chainfires 3D does not work on new versions of Android. You ate going to have to flash the stock firmware to get your device wiring again. Unfortunately there is little information about your device on XDA. Try asking for where to find and how to flash the stick firmware here,http://forum.xda-developers.com/showthread.php?t=2257421
Thread closed.
Hi guys. My LG x145 has been bootlooping since Monday and I can't seem to fix it.
My brother tried to flash it with CM 11 and maybe messed with the steps and its been bootlooping since.
We have tested the phone to see if it's bootlooping on its own. We removed the battery for an amount of time then return it in place to see if the phone will turn itself on. It didn't so flashing a rom to the phone and messing up the process must have lead to the device bootlooping.
We can't:
enter recovery mode
enter download mode
enter bootloader
Whenever we tried booting the phone to recovery mode, the phone would start up normally and display the LG logo with a note below it that it is booting up in recovery mode. But after a few seconds, it would turn itself off and on again.
--------
We tried:
using adb to boot in the aforementioned boot states
flashing it with lg flash tool 2014
following some posted answers in some forums with the use of lg mobile support and lg pc suite
-------
The problem with the above is that the device can't be detected despite having installed the drivers when I rooted the phone last year. I rooted the phone using my laptop and kingo root.
Any form of help is much appreciated. Thanks in advance.
dcd3lt4 said:
Hi guys. My LG x145 has been bootlooping since Monday and I can't seem to fix it.
My brother tried to flash it with CM 11 and maybe messed with the steps and its been bootlooping since.
We have tested the phone to see if it's bootlooping on its own. We removed the battery for an amount of time then return it in place to see if the phone will turn itself on. It didn't so flashing a rom to the phone and messing up the process must have lead to the device bootlooping.
We can't:
enter recovery mode
enter download mode
enter bootloader
Whenever we tried booting the phone to recovery mode, the phone would start up normally and display the LG logo with a note below it that it is booting up in recovery mode. But after a few seconds, it would turn itself off and on again.
--------
We tried:
using adb to boot in the aforementioned boot states
flashing it with lg flash tool 2014
following some posted answers in some forums with the use of lg mobile support and lg pc suite
-------
The problem with the above is that the device can't be detected despite having installed the drivers when I rooted the phone last year. I rooted the phone using my laptop and kingo root.
Any form of help is much appreciated. Thanks in advance.
Click to expand...
Click to collapse
Hi
Thank you for using XDA Assist
Sorry for the inconvenience. Cant find any specific thread for your device but you may post here for now
http://forum.xda-developers.com/android/help
Thank you..
hi guys, today i tried to root my lg g3 d855 european edition wen i rooted my phone i had to reboot but after that the phone got stuck on the lg logo so i tried to hard reset the device, and it worked fine i pressed yes to factory reset but the device is still stuck on the lg logo screen can anyone help me? thanks in advance
XDA Visitor said:
hi guys, today i tried to root my lg g3 d855 european edition wen i rooted my phone i had to reboot but after that the phone got stuck on the lg logo so i tried to hard reset the device, and it worked fine i pressed yes to factory reset but the device is still stuck on the lg logo screen can anyone help me? thanks in advance
Click to expand...
Click to collapse
Hi
Thank you for using XDA assist
You may create an account and head over here
http://forum.xda-developers.com/lg-g3/help
Dear friends,
I am in deep trouble. Few days ago I have flashed CM rom on my LG G3 F400L. Now the problem is after waking up today I find my set totally dead. I can't enter into recovery mode with holding buttons. The phone stucked into LG logo. Tried many times to flash with LG flash tool. But it says download fail, device model is different.Check ur phone or dll. Tried generic dll but not working. Any help will be much appreciated. Thanks.