Database Info

[Q] Nexus Root Toolkit trouble

Hello people,
I'm trying to Unlock the bootloader of my Nexus S (SHW-M200K) with Nexus Root Toolkit. But the problem is that i need the Modified boot image named "modified_boot_sojuk_4.1.1_JRO03E.img" to do that & I can't download it from Goo.im :crying: . WugFresh is not replying my comments. Please help me to download that image. Thanks.

Here: http://www.mediafire.com/?5o3eqkxa6dcmatp
Put it wherever you installed nexus root toolkit in this directory and folder: \WugFresh Development\data\Modified_Boot

ej8989 said:
Here:
Put it wherever you installed nexus root toolkit in this directory and folder: \WugFresh Development\data\Modified_Boot
Click to expand...
Click to collapse
:victory: It worked itself today somehow. Anyway you were very helpful and i appreciate that. Thank you so much. I'm going to Root my Korean SHW-M200K and flash CyanogenMod 10 Stable with Marmite kernel. It works right? :silly:

m4heshd said:
:victory: It worked itself today somehow. Anyway you were very helpful and i appreciate that. Thank you so much. I'm going to Root my Korean SHW-M200K and flash CyanogenMod 10 Stable with Marmite kernel. It works right? :silly:
Click to expand...
Click to collapse
Yep it works pretty well. Make sure you flash the marmite-cm version. :good:

postoffice infetyv
ej8989 said:
Yep it works pretty well. Make sure you flash the marmite-cm version. :good:
Click to expand...
Click to collapse
That's sweet news . ej8989, can you give me a Link to that kernel and Tell me how to flash the kernel. I know how to flash the ROM but not kernel :silly: . Advices from you is so better. (I'm a noooooob in android. I was a iPhone guy since birth LOL. So help meee :highfive :silly:

m4heshd said:
That's sweet news . ej8989, can you give me a Link to that kernel and Tell me how to flash the kernel. I know how to flash the ROM but not kernel :silly: . Advices from you is so better. (I'm a noooooob in android. I was a iPhone guy since birth LOL. So help meee :highfive :silly:
Click to expand...
Click to collapse
Here: http://d-h.st/hYS
Flashing a kernel is the same as flashing a rom, if you're doing it via custom recovery. :good:

ej8989 said:
Here:
Flashing a kernel is the same as flashing a rom, if you're doing it via custom recovery. :good:
Click to expand...
Click to collapse
Thanks mate. Another question came out. How to identify the variant Correctly? My bootloader says this
Product Name : Herring
HW Version : Rev 11
BootLoader Version : I9020XXKL1
Baseband Version : M200KRKC1
Carrier Info : KTT
Serial No : ......
Lock State - Locked
What is this really?

:victory: Got it to work. It was a Korean version. Did a ton of research to find out what it is. Now i'm running CM10 with you kernel. It's great. Thank you a lot for your help. You people are very kind. Best forum ever. :good: :highfive:

m4heshd said:
:victory: Got it to work. It was a Korean version. Did a ton of research to find out what it is. Now i'm running CM10 with you kernel. It's great. Thank you a lot for your help. You people are very kind. Best forum ever. :good: :highfive:
Click to expand...
Click to collapse
Install NS Tools from playstore to be able to control the kernel's features.
If the kernel's working out great for you, go to this thread: http://forum.xda-developers.com/showpost.php?p=27598370&postcount=1
Then click the "Thanks" button at the lower left corner of the post. :good:

ej8989 said:
Install NS Tools from playstore to be able to control the kernel's features.
If the kernel's working out great for you, go to this thread:
Then click the "Thanks" button at the lower left corner of the post. :good:
Click to expand...
Click to collapse
Hey i got a trouble with Proximity Sensor. It's not working :crying: What to do now?

m4heshd said:
Hey i got a trouble with Proximity Sensor. It's not working :crying: What to do now?
Click to expand...
Click to collapse
In what way are you having troubles with it? During calls?
And what version of CM10 are you using? (For reference)

ej8989 said:
In what way are you having troubles with it? During calls?
And what version of CM10 are you using? (For reference)
Click to expand...
Click to collapse
Yeah, the display does not turn off. Then i downloaded "Proximity sensor finder" and checked, it didn't work either :crying:

m4heshd said:
Yeah, the display does not turn off. Then i downloaded "Proximity sensor finder" and checked, it didn't work either :crying:
Click to expand...
Click to collapse
Unfortunately I can't help you with this.
I also had problems a few months back with another sensor (accelerometer) using CM10 so i switched ROMs and never used stock CM10 again. Let's hope someone with the proper solution might be able to help you :good:
Oh by the way, did you do a clean flash? (Wipe everything before flashing the ROM)

ej8989 said:
Unfortunately I can't help you with this.
I also had problems a few months back with another sensor (accelerometer) using CM10 so i switched ROMs and never used stock CM10 again. Let's hope someone with the proper solution might be able to help you :good:
Oh by the way, did you do a clean flash? (Wipe everything before flashing the ROM)
Click to expand...
Click to collapse
Yeah i wiped everything. Is the problem with ROM? Can you give me a Stock kernel? But the problem is SHW-M200 latest version of stock is 4.1.1 :crying:

m4heshd said:
Yeah i wiped everything. Is the problem with ROM? Can you give me a Stock kernel? But the problem is SHW-M200 latest version of stock is 4.1.1 :crying:
Click to expand...
Click to collapse
I am quite positive it's the ROM. Try this: Flash the ROM again without wiping anything.

ej8989 said:
I am quite positive it's the ROM. Try this: Flash the ROM again without wiping anything.
Click to expand...
Click to collapse
Ok i'll try. Is your Mirage Divide 2.2 ROM and Xens 05/27 Kernel Good? Can i use the Latest DSP Manger with it?

m4heshd said:
Ok i'll try. Is your Mirage Divide 2.2 ROM and Xens 05/27 Kernel Good? Can i use the Latest DSP Manger with it?
Click to expand...
Click to collapse
Yep it's quite good but there's a new version out here: http://forum.xda-developers.com/showthread.php?t=2305485
I'd recommend trying that if your problem still persist after re-flashing CM10.

ej8989 said:
Yep it's quite good but there's a new version out here:
I'd recommend trying that if your problem still persist after re-flashing CM10.
Click to expand...
Click to collapse
heeey, i Noticed that Accelerometer is also not working & just gave a reboot. Everything works fine now :highfive: :victory:

m4heshd said:
heeey, i Noticed that Accelerometer is also not working & just gave a reboot. Everything works fine now :highfive: :victory:
Click to expand...
Click to collapse
Great! Enjoy your device :good:

ej8989 said:
Great! Enjoy your device :good:
Click to expand...
Click to collapse
:good: I gave a thanks to Marmite and also you my friend. Happy to take help from you.

ROMS for T230NU

Development? Anyone?

There is one guy I saw posted on a rooting thread that he has developed a ROM for this device but, does not know how to write the updater-script so he is looking for help with that. Perhaps you can help.
You can find that post HERE

BookCase said:
There is one guy I saw posted on a rooting thread that he has developed a ROM for this device but, does not know how to write the updater-script so he is looking for help with that. Perhaps you can help.
You can find that post HERE
Click to expand...
Click to collapse
i wish! i know nothing about development. :crying: i would love to learn. but that doesnt help anyone here. i started a step by step to port CM but got stuck because i couldnt find kernel source. PLEASE someone, we got root, now get us off touchwiz!

logikism said:
i wish! i know nothing about development. :crying: i would love to learn. but that doesnt help anyone here. i started a step by step to port CM but got stuck because i couldnt find kernel source. PLEASE someone, who got root, now get us off touchwiz!
Click to expand...
Click to collapse
I have ported roms in the past to Kindle Fire HD from the Nexus tabs. It's way easier to port than to build a rom from scratch. The tricky part is finding the easiest roms to work with.

Well I can't do either.
Wouldn't we want to get something on here other than stock?
I'll take a port! Lol

logikism said:
Well I can't do either.
Wouldn't we want to get something on here other than stock?
I'll take a port! Lol
Click to expand...
Click to collapse
I'll look around, see what might work.

logikism said:
i wish! i know nothing about development. :crying: i would love to learn. but that doesnt help anyone here. i started a step by step to port CM but got stuck because i couldnt find kernel source. PLEASE someone, who got root, now get us off touchwiz!
Click to expand...
Click to collapse
here you can find the kernel source http://opensource.samsung.com/reception.do

Well I would think that you would need a working custom recovery with external SD card support first. Though the big feature I am looking forward to is a kernel that supports Roehsoft Ram Expander (swap) which while it works fine on my S3 does not work at all on the Tab 4 7.0.

nl3142 said:
Well I would think that you would need a working custom recovery with external SD card support first. Though the big feature I am looking forward to is a kernel that supports Roehsoft Ram Expander (swap) which while it works fine on my S3 does not work at all on the Tab 4 7.0.
Click to expand...
Click to collapse
There is a fully working recovery with SDcard read/write support as mentioned in THIS post.
What I did was downloaded the TWRP 2.8.0.1 .img for t230 then flashed it over the older non-working TWRP using #Rashr. It works for me on SM-T230NU and wipe works. Dalvik/Cache, everything.
CREDITS: agriff

BookCase said:
I'll look around, see what might work.
Click to expand...
Click to collapse
That would be great! Thank you!
Maybe we can get the ball rolling on development!

sub77 said:
here you can find the kernel source http://opensource.samsung.com/reception.do
Click to expand...
Click to collapse
Thank you, I sent request

Sadly I have no porting knowledge atm, but if I could help with testing or something, then just pm me. I'd love to see some cm or PA on my tab 4 7.0

adammo666 said:
Sadly I have no porting knowledge atm, but if I could help with testing or something, then just pm me. I'd love to see some cm or PA on my tab 4 7.0
Click to expand...
Click to collapse
my request to get source was approved but when i click the download link nothing happens.
I personally want to see MAHDI ROM!

logikism said:
my request to get source was approved but when i click the download link nothing happens.
I personally want to see MAHDI ROM!
Click to expand...
Click to collapse
Yep I know nothing happens. But just open it in internet explorer (assuming you used chrome, just like I did).
if you open it in IE new window pops up and gets you to download

logikism said:
Thank you, I sent request
Click to expand...
Click to collapse
adammo666 said:
Sadly I have no porting knowledge atm, but if I could help with testing or something, then just pm me. I'd love to see some cm or PA on my tab 4 7.0
Click to expand...
Click to collapse
neither do i, but ill try and hope for help.

BookCase said:
There is a fully working recovery with SDcard read/write support as mentioned in THIS post.
What I did was downloaded the TWRP 2.8.0.1 .img for t230 then flashed it over the older non-working TWRP using #Rashr. It works for me on SM-T230NU and wipe works. Dalvik/Cache, everything.
CREDITS: agriff
Click to expand...
Click to collapse
i did this and phone stuck on boot screen. now it wont power on or charge. wonderful!
Any help?

BookCase said:
There is a fully working recovery with SDcard read/write support as mentioned in THIS post.
What I did was downloaded the TWRP 2.8.0.1 .img for t230 then flashed it over the older non-working TWRP using #Rashr. It works for me on SM-T230NU and wipe works. Dalvik/Cache, everything.
CREDITS: agriff
Click to expand...
Click to collapse
I already have root (by using vroot and then replacing the chinese app with supersu). Can I just flash TWRP with Rashr or do I need to redo the whole thing from scratch?

logikism said:
i did this and phone stuck on boot screen. now it wont power on or charge. wonderful!
Any help?
Click to expand...
Click to collapse
Hmm, I have no idea. Worked for me in one go. Maybe start over?
nl3142 said:
I already have root (by using vroot and then replacing the chinese app with supersu). Can I just flash TWRP with Rashr or do I need to redo the whole thing from scratch?
Click to expand...
Click to collapse
I resstored the device in odin to the latest factory firmware then flashed the twrp in odin, rebooted directly to recovery and flashed supersu. Rebooted to system, set up all my stuff and flashed the new twrp over the old twrp using rashr. I had to reboot once to set up rashr before i could flash but, it all worked perfectly for me

BookCase said:
Hmm, I have no idea. Worked for me in one go. Maybe start over?
Click to expand...
Click to collapse
cant start over if it wont turn on at all and i believe the battery is dead and it wont charge.
ive read about this issue with other galaxy tabs (2,3) and i need to open up and disconnect battery, i will try this when i get home. i hope it does something after. i just got this thing.
i cant just flash the good twrp instead of one over the other?

logikism said:
cant start over if it wont turn on at all and i believe the battery is dead and it wont charge.
ive read about this issue with other galaxy tabs (2,3) and i need to open up and disconnect battery, i will try this when i get home. i hope it does something after. i just got this thing.
i cant just flash the good twrp instead of one over the other?
Click to expand...
Click to collapse
I don't know. I'm just telling you what I did. I didn't try that way.

Illusion ROM Boot tester

Hello I am the illusion dev and have released builds for d851 and ls990 and would like to bring it here for you too. I have builds sitting but will not release without someone telling me it boots first.
Any one want to try it?.
Please dont respond if you dont know how to get out of a bootloop as this is untested for your device but i believe it will work fine.

$droyd$ said:
Hello I am the illusion dev and have released builds for d851 and ls990 and would like to bring it here for you too. I have builds sitting but will not release without someone telling me it boots first.
Any one want to try it?.
Please dont respond if you dont know how to get out of a bootloop as this is untested for your device but i believe it will work fine.
Click to expand...
Click to collapse
My favorite questions to threads as such
Not sure what a bootloop is... but ah what the hell
Will this void my warranty?
Will this work on my version of Motorola?
Your DL is not working
Can you give instruction on how to install recovery
oh, BTW, I would love to give it a whirl. Thank you my good sir.

https://www.androidfilehost.com/?fid=95864024717068268
Please report if it boots or.not.

$droyd$ said:
https://www.androidfilehost.com/?fid=95864024717068268
Please report if it boots or.not.
Click to expand...
Click to collapse
lol, already found it. installing as we speak

You'll have a funny DPI issue with small icons at first.. Just change DPI to the desired density in display settings and reboot.. I just fixed it in source so next build will be fine.

Doesn't seem to like it atm. Going to try another dl.
I will keep an eye on your DL section for update

TonyStark said:
Doesn't seem to like it atm. Going to try another dl.
I will keep an eye on your DL section for update
Click to expand...
Click to collapse
? What .. The ROM won't boot? Clean install?

$droyd$ said:
? What .. The ROM won't boot? Clean install?
Click to expand...
Click to collapse
Yes sir. Hit restart and it goes directly back to TWRP

TonyStark said:
Yes sir. Hit restart and it goes directly back to TWRP
Click to expand...
Click to collapse
That's odd... Others said it booted.. Maybe a bad DL.

Got it to work mate. Realized I had loaded it to my ex sd... Worked from internal:good:

[Root] HTC A9

This method is now depreciated, please see the A9 TWRP thread.
If you appreciate this, please considering donating to Chainfire, and either donating to beaups and myself at [email protected] or purchasing a copy of our SunShine s-off application, which we hope to bring support to the A9 with soon from http://theroot.ninja

Now One A9 is buy-able!

itskapil said:
Now One A9 is buy-able!
Click to expand...
Click to collapse
I'll be buying a second one, to replace my nexus 5x with, I'm really enjoying the feel of it

I really agree with you on this being and looking better than the Nexus 5X, thanks for Root.

Nice, so the A9 will be supported by Sunshine in the future? Great job!

Lizard said:
Nice, so the A9 will be supported by Sunshine in the future? Great job!
Click to expand...
Click to collapse
most likely

Hey Jcase thank u for this nice thread..
My question is my device is 1.10.401.7 and i need to root it by your thread so :
-First i need to unkock the bootloader
- download the supersu or superuser and reboot "adb reboot download" and get acces to option and then flash the su zip ?
I'm right ?

Will972 said:
Hey Jcase thank u for this nice thread..
My question is my device is 1.10.401.7 and i need to root it by your thread so :
-First i need to unkock the bootloader
- download the supersu or superuser and reboot "adb reboot download" and get acces to option and then flash the su zip ?
I'm right ?
Click to expand...
Click to collapse
If its a non ATT A09, then I will need to whip together an image for your device. Let me know if it isn't and I can

Randomly came across this thread. JEEZ, THAT WAS QUICK!!!
Great job JCase!
"S-OFF" brings nostalgia straight away, remind me of Desire

Great work. This thing gets soff I'll buy it. Good to see early development.

jcase said:
If its a non ATT A09, then I will need to whip together an image for your device. Let me know if it isn't and I can
Click to expand...
Click to collapse
For use Sprint users , is there anything we can do to help along with a Sprint version of this?
--
Just got the A9 today. . . I did not think about how new it was , and was all kinds of looking forward to getting rooted.

chaos67731 said:
For use Sprint users , is there anything we can do to help along with a Sprint version of this?
--
Just got the A9 today. . . I did not think about how new it was , and was all kinds of looking forward to getting rooted.
Click to expand...
Click to collapse
See "[Requesting Model/Carrier/Firmware Support]" in the op

@jcase how can i pull out my stock boot image?

The recovery just posted is for att only or for all model ?

@jcase
Holy ****. You just tear though htc !
I used your root on the m8 way back.
Thank you so much! Keep up the awesome work!

Will972 said:
The recovery just posted is for att only or for all model ?
Click to expand...
Click to collapse
Its really for non, its barely functional until kernel source comes, but should work on all
itsmelutfor said:
@jcase how can i pull out my stock boot image?
Click to expand...
Click to collapse
Instructions in op

Gonna try this when I get home on sprint
Sent from my unknown using Tapatalk

Anyone got a 401 European boot.img?

Cj719 said:
Gonna try this when I get home on sprint
Sent from my unknown using Tapatalk
Click to expand...
Click to collapse
PM me then, I will need to build a boot.img for sprint

jcase said:
PM me then, I will need to build a boot.img for sprint
Click to expand...
Click to collapse
I also have Sprint. I should be able to flash the "recovery" image (not the boot) that you provided and then backup the boot partition from recovery correct?
Also, can your boot image (the one you would make for Sprint) work WITH encryption? I just spent the entire weekend setting up my device and do NOT want to reset to factory.

Magisk Based Grip Rejection Removal Mod

I have created a Magisk based Grip Rejection Removal port for our PH-1 Phones.
What it is: The edges of the phone (the "grip") are disabled to prevent erroneous touches. This will disable this and use the edges of the phone (great for cases)
Prerequisites:
Oreo Beta 1, 2, 3, Oreo 8.1 Beta 1 (LOS has this implemented already)
Magisk 15.0 or newer (Uses 1500 template)
What it does:
It replaces hbtp_grip.so in vendor/bin : modified logic to always disable grip
add post-fs-data command hbtp_daemon tool sendCommand enableGripRejection 0
add resetprop command sys.grip.status=off
The usual disclaimer: This is a free-for-all zip, meaning i dont care if you modify it, pass it off to other groups, help anybody else, etc. I am not responsible if you get your phone messed up, it works for me, and for others. I will help as much as i can. Its a work in process, hopefully, it will make life easier for everybody.
Link V1
https://www.androidfilehost.com/?fid=890129502657589136
Enjoy

Changelog:
V1: - Initial Release

Mine too

Holy ****
Sent from my SM-N950U using Tapatalk

dottat said:
Holy ****
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
yay!!!!! recognition from the man himself.....

OK yes. This is bad ass. Great mod for us case users.

This failed install for me. Pic included. Maybe it's because I am still on 15.6 magisk?

runderekrun said:
OK yes. This is bad ass. Great mod for us case users.
Click to expand...
Click to collapse
What does this do?

runderekrun said:
This failed install for me. Pic included. Maybe it's because I am still on 15.6 magisk?
Click to expand...
Click to collapse
it should work on 15.3, i dont think there is a 15.6. Its fine on 16.0. Also, its for stock rom only.

aer0zer0 said:
it should work on 15.3, i dont think there is a 15.6. Its fine on 16.0. Also, its for stock rom only.
Click to expand...
Click to collapse
Sorry I meant 15.3 Magisk. I am on stock rom too. hmm...

runderekrun said:
Sorry I meant 15.3 Magisk. I am on stock rom too. hmm...
Click to expand...
Click to collapse
are you on 8.1 beta?

aer0zer0 said:
are you on 8.1 beta?
Click to expand...
Click to collapse
Yes sir. All your other magisk modules have worked for me.

runderekrun said:
Yes sir. All your other magisk modules have worked for me.
Click to expand...
Click to collapse
Try v16.0

I just have to say I love you bro.

Hadookie said:
I just have to say I love you bro.
Click to expand...
Click to collapse
I love you too bro ?

Ooo, I likee. Any chance of getting in the Magisk>Downloads section of the app?
What can I say, I'm lazy ;>)

Skripka said:
Ooo, I likee. Any chance of getting in the Magisk>Downloads section of the app?
What can I say, I'm lazy ;>)
Click to expand...
Click to collapse
Meh.... Don't really feel like maintaining a git to do so

I tried adopting this for nougat as the same file is in /system/etc but my magisk-fu is very poor. It doesn't replace the file for me.
Do I have it right that changing enableGripRejection to 0 in both parts of the decision tree then rebooting will have the same effect, or do I specifically need to tell the daemon as in the OP's magisk module?

bitwarrior1 said:
I tried adopting this for nougat as the same file is in /system/etc but my magisk-fu is very poor. It doesn't replace the file for me.
Do I have it right that changing enableGripRejection to 0 in both parts of the decision tree then rebooting will have the same effect, or do I specifically need to tell the daemon as in the OP's magisk module?
Click to expand...
Click to collapse
Lemme look at it, will need your help to find that file

Officially deprecated...... It's built into 8.1 release