I have a shortcut that brings up my ebooks directory in the traditional fexplore list view. What I want to know is if there is any command line argument I can use to make it show up in a more finger (and eye) friendly Icon View, like that which occurs if you do start -> Programs.
I found another post asking this question, but no answers. Thanks for your time.
a friendly and hopeful bump
Sure,
take a look into my thread;
http://forum.xda-developers.com/showthread.php?t=623195
There are links to other pages with lots of nice applications/utilities.
There are new utilities (yet not made by me though).
Within it is the basics of making your own shortcuts.
Within it is the basis of adding your own icon.
or *.icl icon library..
Now and then I'm still updating (editing) it. I'm looking into two *.icl files, where I need to find out if I can share 'm here (that is within the above link).
IMO this is a nice start fortunz
Senax
I do appreciate the info (which I've bookmarked for other uses), but I didn't notice any Icon View parameters for fexplore in the post. I'm not really interested in altering what icon the .lnk has, I'm just looking to avoid the default List View fexplore uses.
My googling on the issue has also been a complete failure. I've been assuming that Start -> Programs (sans manila, I don't know if it uses the same setup) on vanilla 6.1 uses fexplore in an Icon View, but I suppose it could be using a different program entirely to browse the start folder.
Another approach
Use Opera instead
Goto the url: file://localhost/ Browse for your preferred directory, bookmark it, make a link (*.lnk) for this bookmark and put this link on your application launcher. You could also copy and paste it into another browser (with better/other view capabilities).
Just a thought,
Senax
Senax said:
Use Opera instead
Goto the url: file://localhost/ Browse for your preferred directory, bookmark it, make a link (*.lnk) for this bookmark and put this link on your application launcher. You could also copy and paste it into another browser (with better/other view capabilities).
Just a thought,
Senax
Click to expand...
Click to collapse
It's an interesting approach. Not quite up my alley having tested it out now, but I do appreciate the thought.
Since fexplore parameters seem to not be known, perhaps I should be looking for another file manager to use for these particular purposes.
fexplore free alternative
Hello again,
IMO I found it! I have it under the hood for ages, maybe that's why I did not think of it in the first place ; start using the free ware Total Commander file manager. Set it in it's Menu to Show - Large Icons
Done!
Senax
What you need is File Explorer Extensions
http://forum.xda-developers.com/showthread.php?t=421723
You can switch between big icon and detailed view, but not using command line.
And
http://www.vijay555.com/?Releases:VJSmallIcons
Can get command line parameters, but only for program menu (WM 6.1 and below)
Senax said:
Hello again,
IMO I found it! I have it under the hood for ages, maybe that's why I did not think of it in the first place ; start using the free ware Total Commander file manager. Set it in it's Menu to Show - Large Icons
Done!
Senax
Click to expand...
Click to collapse
Does it always default to showing large icons thereafter (Every time you open the program again after it's been shut down completely), or do you have to change it each time?
If not, I see at least one element in the ini file that might make the setting keep. Thanks. I'll give that a spin.
MiXplorer: Q&A and FAQ (User Manual)
Table Of Contents:
i. INTRODUCTION, GETTING MIXPLORER, & INSTALLATION (This post)
ii. UI, NAVIGATION, VIEW CONFIGURATION, BOOKMARKS, TABS
iii. WORKING WITH FILES & FOLDERS (Copy Move methods, Trash option)
iv. FTP, HTTP, TCP SERVERS
v. MiX NUGGETS (Freestanding Topical Posts)
vi. THEMES and SKINS
vii. BUG REPORTING, TROUBLESHOOTING, AND FAQ WIP
MiX Nugget - Settings Overview: https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-82834917
Notes:
If you are just starting with MiXplorer then a general review of this FAQ might be helpful but if you seek information about a particular feature or workaround you can see if there is a "MiX Nugget" for it. MiX Nuggets are individual freestanding FAQ posts which describe a MiXplorer feature in enough detail for basic use without having to sift through whole FAQ. v. MiX NUGGETS (Freestanding Topical Posts).
Issues and workarounds of the moment:
As the android OS and individual apps evolve there are often clusters of issues for which there are common sets of symptoms and common workarounds. This section is to share a link to whatever is the latest such batch of such issues/workarounds.
MiX Nugget - Document provider Mash-Up: (accessing SD card and or /android/data and other directories on newer Android versions. https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-87626419.
--------------------------------------
i) INTRODUCTION
As mentioned in an introduction from the main thread: "MiXplorer (Mix of Explorers) is a fast, smooth, beautiful, reliable and fully-featured file manager with a simple and intuitive user interface." created by XDA member and Recognized Developer @HootanParsa
I (IronTechmonkey) am a MiXplorer user and who volunteered (was volunteered) to create the FAQ but I am not the/a developer. This FAQ attempts to describe configuration options, file & folder operations, UI options, and MiX utilities, as well as to share workarounds for known issues or usage cases. Please feel free to provide, suggestions, corrections, or additions which could be linked to or added to the OPs. Thanks to all for your input already as much of this comes from your questions and answers in the main MiXplorer thread. Thanks to @HootanParsa for such a good file management utility.
Please continue to direct bug reporting and tech discussion to the primary MiXplorer thread: http://forum.xda-developers.com/showthread.php?t=1523691.
Note: the developer is sometimes away for periods of time, days or weeks or even months, but is good about following up upon return.
SOME MIXPLORER HISTORY (MiXtory?)
This post by HootanParsa describes a how MiXplorer got started and some key events during its relationship with Google Play Store. https://forum.xda-developers.com/t/...y-featured-file-manager.1523691/post-77894840
Here is another note from HootanParsa regarding the history of MiXplorer on Playstore https://forum.xda-developers.com/showthread.php?t=1523691&p=73870110.
MiXplorer is closed source, and because the developer rarely if ever engages in discussions about closed vs. open source this is not discussed at length in the main MiX thread. This is not by any rule but rather by respect for the developer's decision. That being said, past discussions about closed vs. open source have been well informed and informative. Such discussions really do relate to software development, if not to the bugs to be fixed at any given moment, so please feel free to have such discussions here if/when they become too much for the main thread.
--------------------------------------
GETTING MIXPLORER
There are several ways to get MiXplorer and keep it updated and there are some methods which should not be used. In particular do not install MiXplorer via Magisk module or other system modification. This is known to cause significant problems and is not supported. Here are the ways to get MiXplorer:
1) XDA Version in Main Thread: https://forum.xda-developers.com/showthread.php?t=1523691:
This is the place for p the latest stable version, which is usually available in post 2. This is also where you can get the latest beta version. Note: it is always a good idea to check the main thread's OPs to see what version # is flagged as stable, as well as check the change-log. Add-ons can be obtained through the app which links to website.
2) Playstore (MiXplorer Silver). As announced by HootanParsa here https://forum.xda-developers.com/showpost.php?p=78465999&postcount=27232; "MiX Silver a bundle of MiX with Archive and SMB2 addons and the latest language resources is uploaded in Play store as a paid app to support the development of MiXplorer. If you liked it and installed it and found a problem, please let me know. Thank you very much. "
Note: The Playstore-Silver and XDA-Stable versions of MiXplorer are essentially the same (sometimes with small variation) but the Playstore-Silver version includes some add-ons (describe below and at Playstore page) which would have to be installed separately and manually in the XDA version; otherwise the 2 version are functionally the same.
3) APK Mirror: This is an unsupported repository of more versions of MiX than most people would need, but some of these builds may be helpful in some situations and it provides access outside of Playstore.
MiX at APK Mirror: https://www.apkmirror.com/apk/hootan-parsa/mixplorer-hootanparsa/
Old link (just in case) https://www.apkmirror.com/uploads/?q=pishrodevs.
If this link does not work then search Google for [MiXplorer APK Mirror]
As to upgrade paths: The Play Store gives a one-shot installation and upgrade path for the app and its included add-ons. The XDA stable version allows users to decide specifically which add-ons are installed but offers a similarly simple upgrade path from with the app.
4) [POSSIBLE INACTIVE] APKMirror RSS Feeds: https://www.apkmirror.com/apk/pishrodevs/mixplorer-hootanparsa/feed/
[inactive?]http://www.apkmirror.com/apk/hootanparsa/feed/ The ApkMirror RSS feeds are considered by many to be a similarly "stable" and up to date as the main MiXplorer thread and XDA Labs but it offers less information about the development progression of recent updates.
Add-ons: MiXplorer Add-ons can be installed from within the app like this:
Settings > Addons > and click add button > follow links to browse and download appropriate add-ons.
--------------------------------------
INSTALLATION:
After installing MiXplorer there are some things that must be done in order to give MiXplorer proper access to storage locations and root or SU access. It is a good idea to get these things out of the way as part of the installation (or update) of MiXplorer rather than on-the-fly as you need to perform file management tasks. Here is a brief walk-through of how to give MiXplorer it's requisite permissions. This is written for Android Nougat which has more of these prerequisites than earlier Android versions so please note that things may differ across different ROMs and SU/root methods:
Do this stuff first, immediately after installing MiXplorer but before configuring it and importing skins and or settings
- At first run of MiXplorer at prompt "Allow MiXplorer to access photos, media, and files on your device?" Select to Allow.
- Make sure root is enabled in MiX setting > Navigate to Root "/" to force first time SU permissions request > Select " allow" and "remember".
- Navigate to external SD and create a new folder. There should a prompt "Attention Please select Ext SD... to gain permissions". Note: In some situations you may not have to create a folder to invoke this prompt.
BUG REPORTING
- Please report bugs in the primary MiXplorer thread here: http://forum.xda-developers.com/showthread.php?t=1523691. Bug reports should include. details about your device (Android version, ROM version, Root status, SU method, MiXplorer version) as well as a step by step description of how to reproduce the issue and a log taken while the issue was reproduced. There are more suggestions for testing, logging and reporting bugs in this post: https://forum.xda-developers.com/showpost.php?p=65157367&postcount=7
ii. UI, NAVIGATION, VIEW CONFIGURATION, BOOKMARKS, TABS
1) Primary UI Components
2) Navigation
3) Drawer (Bookmarks/History)
4) Tabs
5) Views (file folder list)
6) "Home" page - described in MiX Nugget - Home Page - https://forum.xda-developers.com/showpost.php?p=82781209&postcount=1168
--------------------------------------
1) Primary UI Components
The names of various UI objects may be referenced throughout documentation (and are helpful to know when configuring theme). Here are the names of a few primary UI components along with the specific name for their background colors in the theme configuration. This is just as a reference point for the documentation. For more about skins and themes see that post.
Status Bar: TINT_STATUS_BAR
Main Bar: BG_BAR_MAIN
Tab Bar: BG_BAR_TAB
Tab Indicator: TINT_TAB_INDICATOR
Selected Tab: TINT_TAB_INDICATOR_SELECTED
Page: BG_PAGE
Tools bar: BG_BAR_TOOLS
Navigation Bar: TINT_NAVIGATION_BAR
I) Action Bar: BG_BAR_ACTION The Action Bar appears in place of the Main Bar when one or more items is selected.
J) Drawer: The Drawer can be opened by tapping Hamburger in Main Bar or swiping the Page from left edge toward right and takes it’s background color from BG_BAR_MAIN.
--------------------------------------
2) Navigation
To navigate through folders; Tap the name of he folder you want to enter, or select a bookmark or history item. Note: Tapping the icon to the left will select and highlight the folder.
To go to the previously accessed folder:; Press back button.
To go anywhere in the path you are browsing: Tap the Location button in Main bar then tapping the part of the folder tree you want to go to.
To go to a manually entered location: Long press the Address in the Main bar then tap “Enter the path”. Note the other things that can be done from this menu: Copy path, Copy name, Enter the path, Create shortcut, Clear thumbnails cache, Properties. Note: The items in lists like this may change as MiXplorer evolves.
To search for items: Tap the search icon, then you can start typing what you want to find in current folder.
To filter the search: tap the leaning-hamburger, then select an option.
To search recursively (into sub-folders): Tap the right-angle arrow icon, then choose options and search criteria. See this FAQ Nugget for recursive and advanced search options: https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-82781351
Regex: Regex is a fairly powerful method of using expressions (wild-cards and variables) to do searches, and can also be used for renaming files.
Harvesting information in this post https://forum.xda-developers.com/showpost.php?p=71218953&postcount=118
To change the View level of details: Tap the View button, then select an option.
To Add a file or folder: Tap the Add button
To refresh the View: Tap the Refresh button (or tap the Tab title, or tap the Location button in Main bar then tap the location).
To sort the view: Tap the Sort button (A-Z icon)
To show or hide an item flagged as hidden: With no items selected, tap overflow menu then tap "Show Hidden" or "Don't show hidden".
To exit MiXplorer: Long-press Back button.
------------------------------------
3) Bookmarks/History (Drawer)
To open the Drawer for Bookmarks and History: Tap hamburger in Main Bar, or swipe from the left edge toward right.
To create a Bookmark to a location on the device: Navigate to the location, then long press the Location in the Main (top) Bar, then tap "Add to...", then tap "Bookmarks"; or Navigate to one level above the folder, then long press the folder in the file/folder list, then tap overflow menu, then tap "Add to...", then tap "Bookmarks". :
To create a Bookmark to a network share, server or cloud: Open Drawer, then tap hamburger, then tap Add storage, then select and configure the type of storage. There is a "Custom" option at the bottom of the list. Here are examples of 2 common types of network bookmarks:
1) To access shared folder (SMB share) on PC or other computer on same local network.:
- Have a shared folder on a computer with file sharing and network discovery enabled.
- Open MiXplorer on device connected to same network.
- Bookmarks Drawer
- Hamburger button
- Add Storage
- Custom
- Search local
- Enter credentials
- If the search finds no shares there may be an issue with the sharing on the host or network between devices but you could try manual configuration.
2) To access an FTP Server on another device:.
- Have an FTP server to connect to.
- Bookmarks Drawer
- Hamburger button
- Add Storage
- Custom
- Enter server details (ftp://<ipaddress>:<port>, user-name password)
Notes about network and cloud bookmarks:
- When you create a connection to local network share or cloud via <Bookmark Drawer - hamburger - Add storage>, a Bookmark will automatically be created.
- Depending on the type of network location, when you browse the network location you may or may not be able to create bookmarks to locations within that tree as described above. This should work for SMB shares on a computer or folders on another Android device accessed via MiXplorer FTP and might work for others.
- When you save an off-device bookmark, some context sensitive additional configuration variables may or may not be added to the "Advance settings" field, which in some cases can be edited manually later.
To Delete or modify a bookmark: Open the Drawer, then swipe the bookmark name to the right, then select appropriate action.
To rearrange bookmarks: Open the Drawer, then tap and drag a bookmark by it’s icon up or down.
Sections are labels which can be added to the bookmark list to organize bookmarks into groups. Tapping a bookmark section will expand or collapse the bookmarks between that section and the next section below it. Sections can be edited and moved in the same manner as bookmarks. Note: Moving a section will not bring the bookmarks under it to the new location - just the section itself. Arrangements of the groups must be done manually.
To create a custom category (similar to custom bookmark for a search) in the bookmark list: Open 'All files' - Tap on the search button - Recursively - Enter file-name extensions eg; *.zip|*.rar|*.txt - Press GO - Long press the address bar - Add to bookmarks.
To reset the search-all-by=type folders (archive, apk,image, video, etc) if they are gray and don't work: If you are updating from an older version of MiXplorer you may have to click on bookmark menu and choose "reset default" (which should preserve your own bookmarks) to recreate the new versions of the search bookmarks, then you can delete the gray ones.
Bookmark functions via the Bookmarks Menu: Add storage Reset defaults; Remove all, Export. Note: To import bookmarks, open the exported .micfg file with MiXplorer and select import.
To switch between Bookmarks and History : Open Drawer then tap the Bookmarks or History label in top Bar.
To clear history: Open Drawer to History, then tap mini-hamburger.
--------------------------------------
4) Tabs
1st Tab is left-most. Last Tab is right-most. New tabs will open to the right of the active tab.
General Tab functions can be accessed via the tab menu and are context sensitive, based on Tab bar visibility and tab arrangement.
Some functions can can be accessed by long pressing on a Tab when the Tab Bar is visible.
To refresh a Tab’s view: Swipe down, or tap on the name in the Tab Bar, or tap the location name in main bar then tap it again in the drop down.
To open a new tab:
- Open Bookmarks/History
- Long press on the item that you want to open in a new tab
or
- Select a folder in the main page
- Tap the overflow menu in the action bar
- Tap "Open in new tab",
or;
- Tap the Tab menu then tap "Add new tab"
or;
- When on last (right-most) tab, Swipe from right edge to left (depends on "Settings" - ""More Settings" - "Swiping in first and last...")
Save single tab as default tab or to save a group of tabs (Note: "Save" may occasionally be referred to as "Pin")
To save an individual Tab be opened to a specific location at each app start (default tab)
- Have only one tab opened.
- Navigate to desired location.
- Long press on Tab Title then tap "Set as default".
- Open the Tab drop-down menu, select, "Save tabs", Tap "Now" (leave "On Exit" un-selected).
To save a group of tabs (tab-set) to be opened at each app start:
- Create the tabs, and open each to the location of your choice.
- To set the default tab (to be active at app start) long press on Tab Title then tap "Set as default".
- Open the Tab drop-down menu, select, "Save tabs", Tap "Now" (leave "On Exit" un-selected).
Note: View detail level and sort order should be remembered per tab.
To have MiXplorer save the tab-set that is in place at each app close (to be opened at next app app start):
- Open the Tab menu.
- Select check box: "On Exit".
To reset tabs to whatever was last saved by 'Save tabs - Now" or by "Save tabs - On exit":
- Open the Tab menu then tap Reset tabs. Each Tab's view level and sort order should be remembered and not be reset by this action.
5) Views (file folder list)
There are many ways to configure the file/folder list views using the "View" and "Sort" buttons which appear in the Tools bar at the bottom (in the default skin and configuration). Here are a few of the more notable functions:
- "View" button - "Recursive data": When "Recursive data" is enabled (and after a refresh of the view) MiXplorer will calculate and show the quantity of items and storage space uses in sub-folders.
- "View" button - "Reset defaults": When "Reset defaults" is enabled then pinch zoom settings can be reset to default for each drive independently by going to root of drive, then selecting a view mode (eg "Detailed"). To maintain the different zoom levels disable "Reset defaults".
- "Pin" an item to top of list: A folder or file can be "Pinned" so it stays at the top of the list view regardless of sort options. To pin/unpin an item: Select it then open menu then select pin/unpin. Similarly, apps in the "Open with" list can be pinned to the top of that list by long pressing the app then tapping "Pin"
- Create a custom thumbnail: To create a custom thumbnail for a folder (which would be used when "Auto folder preview" is enabled in main settings) put the image you want to use for the thumbnail in the folder and rename it to .preview.
- Gallery style view for search folders: For the search folders which show all of a certain file type (eg Audio, Document, Image, Video), there is a gallery style view which shows all images of the designated type on the device but grouped in folders by location similar to the way most default gallery apps work. To enable this mode: Tap the "Sort" button then enable "By parent". To show all items in one list without the folders, disable "By parent"
- App, User App, System App: When viewing contents of the "App" search bookmark, tapping on Location allows choice of App (all), User App, System App. To create a custom bookmark to any of those: Tap the Location in Main Bar, then select desired view (App, User App, or System App) then long press location and "Add to" bookmarks.
6) "Home" page
A full page panel containing locations with details, described in more detail here: MiX Nugget - Home Page - https://forum.xda-developers.com/showpost.php?p=82781209&postcount=1168
View Customization (more in Skins/Themes)
Disable Thumbnails (folder specific}: Place image in folder > rename to .nothumbnail
Custom Folder Icon (folder specific): Place image in folder > rename to .foldericon
Custom Folder Icon Preview (folder specific): Place image in folder > rename to. preview
Notes:
- Some image properties may not function properly. Icons can be optimized here: https://tinypng.com/
- Some of these may depend on a related setting within the app (eg .preview file and setting "Auto folder preview")
----------------------------------------------
----------------------------------------------
LINKS TO FAQ SECTIONS
i. INTRODUCTION, GETTING MIXPLORER, & INSTALLATION (This post)
ii. UI, NAVIGATION, VIEW CONFIGURATION, BOOKMARKS, TABS
iii. WORKING WITH FILES & FOLDERS (Copy Move methods, Trash option)
iv. FTP, HTTP, TCP SERVERS
v. MiX NUGGETS (Freestanding Topical Posts)
vi. THEMES and SKINS
vii. BUG REPORTING, TROUBLESHOOTING, AND FAQ WIP
MiX Nugget - Settings Overview: https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-82834917
iii. WORKING WITH FILES & FOLDERS
Search, searching for items: Expanded description of search methods in this post. MiX Nugget - Searching for Files and Folders: https://forum.xda-developers.com/showpost.php?p=82781351&postcount=1170
Select a file or folder: Long press anywhere on the file, or tap on the icon at the left side.
Select multiple files and or folders: Select one file or folder as described above and then select additional items by tapping on the name of each item.
Select all files and folders in the current view: Tap the "Select all" button in the tools bar, or open overflow menu and tap Select all. Note: the Select all button and the Servers button can be swapped in the Tools Bar via Settings - More Settings.
Once you have selected any item(s) the Action Bar will appear (temporally replacing the Main Bar) and will show a counter of selected items with their size, and icons for some standard actions with an overflow menu for more actions. The downward pointing arrow now offers options to expand shift or invert the selection.
There are several ways to to Copy or Move items:
Task queue Select items, then choose an action (repeat process for multiple jobs), then navigate to destination, then tap Job Queue, then select queued task.
- Individual pending tasks or all pending tasks can be cleared from the queue.
- Pending Copy tasks in the queue can be repeated to different destinations.
Drag & drop: Select some items then long press on that selection and drag. A hovering pop-up will appear indicating how many selected items are being dragged.When the the destination folder becomes highlighted, release the selection and respond to the then a “Drop files” prompt which offers a choice to copy or move the selected items.
Copy To and Move To: To copy/move files to a folder to be selected during the process; select items, open menu, tap ]Copy To or Move To, navigate to location, tap OK.
Some long file operations can be paused using the play/pause button in the task status window. Also, from there the task can be canceled or sent to background.
Delete options. There are several delete methods, the visibility of which may be context sensitive, and MiXplorer has a native "recycle/trash" feature which can be enabled in Settings - More Settings - Undo.
Normal: Deletes file “normally”. As is the case with file deletions (not Recycle or Trash) in other OS, the deletion is non-reversible but the raw data may persist until incidentally written over by other system activity.
Trash: Similar to Recycle or Trash bins on desktops. The locations (drives/root paths) where “Trash” functions may very across ROMs and devices. When "Undo" is enabled as described above the following should occur:
- Deleted items are placed in hidden folders named .recycle at the root of each drive. Don't delete those manually unless you are not using the "Undo" feature.
- In the main menu there is an item called "Undo" which shows a list of available undo items. Long press on an item in that list to see the specific files that can be restored. Short press to restore that item/group of items.
- Menu > Undo > "Remove all"; will delete all the .recycle folders and their contents from all drives (if they exist). Also nota bene: only do this if you are sure you wont need to restore anything). Any time you "Trash" something when "Undo" is enabled the .recycle folder for that drive will be recreated. If you've already disabled "Undo" in settings and still have leftover material in the .recycle folders, those folders can be deleted manually (requires "Show hidden")
- In some cases you may be able to recover items manually from the .recycle folders.
- If the trash cannot be emptied, try the following: Main Menu > Undo > Remove all, or Settings > More Settings > deselect Undo. As with manually deleting the contents of the trash/recycle folder, make sure you dont need anything from there before doing this.
Shredder: Destroys files before deleting them. Only available for certain locations. May take longer for larger selections. Deletion by this method is non-reversible and leaves minimal if any recoverable data on the drive.
Batch Delete: When you try to delete a folder as "Normal", it also takes time to clean up database, removing thumbnails, etc... . You can use "Batch Delete" to remove that folder as fast as possible.
----------------------------------------------
----------------------------------------------
[LINKS TO FAQ SECTIONS
i. INTRODUCTION, GETTING MIXPLORER, & INSTALLATION (This post)
ii. UI, NAVIGATION, VIEW CONFIGURATION, BOOKMARKS, TABS
iii. WORKING WITH FILES & FOLDERS (Copy Move methods, Trash option)
iv. FTP, HTTP, TCP SERVERS
v. MiX NUGGETS (Freestanding Topical Posts)
vi. THEMES and SKINS
vii. BUG REPORTING, TROUBLESHOOTING, AND FAQ WIP
MiX Nugget - Settings Overview: https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-82834917
iv. FTP and HTTP SERVERS and Send-to
NOTE: As of MiX 6.57 there were substantial changes to servers; ; TCP was removed, Send-to was merged into FTP server, TLS/SSL toggle and explicit/implicit and other switches were added, and multiple accounts can be configured. After updating to 6.57 a username and password will have to be reconfigured as will a few other things as described below. This post outlines the updated server configurations. The description of server configuration for older version of MiX (6.56 and previous) are in this post: https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-85896901
--------------------------------------------
There are multiple ways MiXplorer can make folders available to other devices including: FTP/Share server, HTTP/WebDav server, SFTP server, and SMB1 Server Each server types offers different functionality and may be applicable in different situations, but the FTP(S,ES)/Share server is most robust and can be accessed by FTP clients and by some native OS file managers so FTP Server was used to create this documentation. HTTP/WebDav server offers less functionality but can be accessed by web browsers and native file explorers on most other systems without any client software, just a full-featured web browser and the requisite credentials. The HTTP server is configured similarly to the FTP server. There are also SFTP and SMB1 servers which are newer and or experimental and which may (or may not) be documented elsewhere.
The MiX server will deliver a different “home” location (folder seen as working folder of directory tree by client) and will offer different levels of access to files on the server device according to: account settings, and method used to run the server, and which folder is in the active tab in MiX on the server device at the time the server is invoked. There is a more detailed description of the different home locations used in different situations below (see Home Path"
Starting Servers
The servers can be started or stopped by a variety of methods: Bottom bar button, main menu, server configuration panel, home screen widget, system tile.
The servers can also be toggled by using Tasker or some other app which can handle intents:
MiX Nugget - Turning Servers ON/OFF with Tasker and...
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-75400602
Some file operations can be performed via intents.:
MiX Nugget - COPY with Tasker and...:
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-75389465
Deep Links:
Additionally, servers can be toggled on/off by using deep-links which are essentially web hyperlinks that can be used to create home-screen shortcuts or which can be run programmatically without requiring the management of other parameters. When invoked by a home screen shortcut or programatically the server will be toggled on or off. Home screen shortcuts can be created by any of many methods including:from within Launchers (eg Nova), or from within some web browsers, or by Tasker, Edge Gestures, Automate, or any app that can create a hyperlink shortcuts on the home screen.
For example here is a hack-ish but effective method that was used to create one of the shortcuts. Paste the link into a browser > attempted to connect > attempt fails because network is off or there is no website > use feature to create a home screen shortcut > the shortcut takes the name of the error page but effectively toggles the server > rename shortcut.
These are the deep-links links for toggling each server. Note: these links may be highlighted as hyperlinks in web browsers viewing this page but they are actually links to the MiX installation on the Android device.
https://mixplorer.com/app/ftp/trigger
https://mixplorer.com/app/sftp/trigger
https://mixplorer.com/app/http/trigger
https://mixplorer.com/app/smb/trigger
You can add the working directory at the end of the deeplinks for the servers. Example without and with specification of a working directory:
https://mixplorer.com/app/ftp/trigger
https://mixplorer.com/app/ftp/trigger/storage/emulated/0/pictures
--------------------------------------------
General Server Settings: The settings on the main edit server panel apply to the server in general and to all accounts which run on it.
To edit server: Open servers list by any method > edit (pencil icon).
Port: This is the port # which is appended to the IP address.
Time out (seconds): The duration of time after which the server turns off automatically.
IP address (optional): Experimental.
Toggle Start on boot: Sets the server to start on device boot.
Toggle TLS/SSL: Enable/disable encryption.
Explicit/Implicit: (FTP/Share only) Set Explicit or Implicit mode.
None/Basic/Digest: (HTTPWebDav only) [description needed]
Keystore: [description needed]
Certificate: [description needed]
More about TLS and Explicit/Implicit here: MiX Nugget: Server Security Settings https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-85932885
--------------------------------------------
Account settings.
There must be one account (which is equivalent to a username and password configured for the server in the previous MiXplorer versions). Multiple accounts can be created for the same server with each account having different credentials and offering different type of access.
To use just one account: (similar to the username/password from the previous version) rename and configure the “admin” placeholder account or create a new account and delete the placeholder.
To create a new account: In the server edit box Tap Add > enter desired parameters > save.
To edit an existing account: Tap the account drop down (the displayed account name) > tap the name of the account you want to edit.
To delete an account: Tap the account drop down (the displayed account name) > tap the name of the account you want to delete > tap delete. Note: the delete button will not appear if there is only one account.
In the Account edit box the following can be set::
Username
Password
Home Path
Read only
Show hidden globally
--------------------------------------------
Home Path = The location that clients will see as working directory or root of directory tree
The root folder for clients is contextual, based on how the server was started: The servers can be started or stopped by a variety of methods: Bottom bar button, main menu, server configuration panel, home screen widget, system tile. If the server is invoked directly from bottom bar, then root to clients should be the same as the currently active folder in the MiXplorer UI on the server device. If the server is invoked from within the server configuration panel then root to clients should be the designated folder from the configuration panel.
Factors:
- If left blank then the the home directory will be auto populated by the root of internal storage (as you may have witnessed).
- Different clients may yield somewhat different behavior. Full client such as Filezilla on desktop recommended for testing and set up before using native Windows, iOS, or Linux file explorers.
Example Usage Case for multiple accounts: in one FTP server an account could be created with a specific home path so that connections to the server under that account will only see that directory, and another account could be created with no home path designated which allows access to the root of the FTP server device.
--------------------------------------------
Send To: To Use the FTP Server to receive files from another device running MiX via Send-to
- Configure FTP servers on both devices with the same port number. Note: The same port # is no longer required; the port can be set in the settings of the connecting device
- Run the server.
- On the client device: select a file > menu > send to > > tap settings to set port to match server port > select server device > in the authentication box enter a password for the displayed account or select a different account and use that account password > Tap OK.
- The regular MiXplorer file operation containing the typical options to abort the process or put it in the background will appear but for small files may not be on the screen for long enough to interact with; nice to have this if you want to gracefully abort a file transfer.
- The file will be copied to the location determined by the home path set for that account based on how server was started.
Note: subsequent file transfers during the same MiXplorer FTP server session may not require credentials and may proceed automatically. In that case in order to switch users the ftp server must be briefly stopped and restarted.
-----------------------
Link back to MiX FAQ Nugget Index: https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-65157352
----------------------------------------------
LINKS TO FAQ SECTIONS
i. INTRODUCTION, GETTING MIXPLORER, & INSTALLATION (This post)
ii. UI, NAVIGATION, VIEW CONFIGURATION, BOOKMARKS, TABS
iii. WORKING WITH FILES & FOLDERS (Copy Move methods, Trash option)
iv. FTP, HTTP, TCP SERVERS
v. MiX NUGGETS (Freestanding Topical Posts)
vi. THEMES and SKINS
vii. BUG REPORTING, TROUBLESHOOTING, AND FAQ WIP
MiX Nugget - Settings Overview: https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-82834917
MiX NUGGET INDEX
Nuggets are freestanding FAQ posts which describe a MiXplorer feature or workaround in enough detail for basic use without having to sift through the sprawling FAQ.
--------------
Add-ons (simple list):
https://forum.xda-developers.com/showpost.php?p=82834971&postcount=1182
--------------
Automated Intents (Tasker etc):
- COPY with Tasker, Automagic and...:
https://forum.xda-developers.com/showpost.php?p=75389465&postcount=422
- Turning Servers ON/OFF with Tasker and ... :
https://forum.xda-developers.com/showpost.php?p=75400602&postcount=424
--------------
Autotag:
https://forum.xda-developers.com/showpost.php?p=75366938&postcount=420
Auto Tasks:
Run specific user configured file operations (Copy, Move, Delete, Archive, Execute) according to schedule, or run manually from within MiX or via an OS home screen shortcut.
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-88674363
--------------
Batch Renaming and Regex:
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-71218953
--------------
Bookmark Advanced Settings:
https://forum.xda-developers.com/showpost.php?p=80301547&postcount=932
- SMB shares on other LAN device.
- FTP servers on other LAN device.
- Bluetooth folder on other BT connected device running MiX
- Cloud
--------------
Date and Time formats:
https://forum.xda-developers.com/showpost.php?p=76749686&postcount=561
and
https://forum.xda-developers.com/showpost.php?p=76750741&postcount=562
--------------
Language package (for translators):
https://forum.xda-developers.com/showpost.php?p=75741128&postcount=469
--------------
Document Provider: For accessing OTG and or accessing /android/data, /android/media, android/obb, and or accessing locations in Android 13, and in other scenarios.
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-85878051
--------------
Home Page: A full page panel of locations including details about the locations:
https://forum.xda-developers.com/showpost.php?p=82781209&postcount=1168
--------------
Merging Text (txt) files:
https://forum.xda-developers.com/showpost.php?p=75786123&postcount=480
--------------
Network: Optimizing Network Connections: https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-84515405
--------------
Recycle Bin and Undo: Track and restore or undo deleted files and some file operations.
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-88077515
--------------
Searching for Files and Folders:
https://forum.xda-developers.com/showpost.php?p=82781351&postcount=1170
Regex can be used in searches as well as renaming:
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308
582/post-71218953
--------------------------------------
SERVERS:
FTP and HTTP SERVERS and Send-to:
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-65157350
Server Security Settings:
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-85932885
FTP, HTTP, TCP SERVERS; Servers configuration ONLY for older version of MiX:
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-85896901
Turning Servers ON/OFF with Tasker: and...:
https://forum.xda-developers.com/showpost.php?p=75400602&postcount=424
Old Server configuration: [URL]http...ers.com/showpost.php?p=75366970&postcount=421
--------------
Settings:
- Settings Overview:
https://forum.xda-developers.com/showpost.php?p=82834917&postcount=1181
- Settings (reset):
https://forum.xda-developers.com/showpost.php?p=83626647&postcount=1263
--------------
Storage Analyzer:
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-85942125
--------------
Tabs: Save (aka; pin), rearrange, close, clone Tabs:
https://forum.xda-developers.com/showpost.php?p=75580704&postcount=440
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-75580704
--------------------------------------
Tools: Find Duplicates, Find App Remnants
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-88077467
--------------
Troubleshooting:
Troubleshooting SD card & USB OTG access, and creating Document Providers.: A troubleshooting walk-through document providers and other issues regarding drive and directory access. This post contains many of the other workaround suggested here. https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-87626419
Set document provider for Android 13 (with some resets):
https://forum.xda-developers.com/t/mixplorer-q-a-a d-faq-user-manual.3308582/post-87492173
Reset Root:
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-87492173
Cannot uninstall MiX from within Android OS, try doing do so via ADB:
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-87652917
Version Compatibility (possibly helpful for some older devices): URL unfurl="false"]https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-84468783[/URL]
Android-version specific workarounds:. including accessing /android/data on internal and external drives, and /data/data. Applicable primarily to A11 and up but might also be applicable elsewhere.
https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-85904825
--------------------------------------
--------------------------------------
Possible additions.
- App backups.
- Archive management.
- Description of available add-ins.
- MiXplorer Media Viewer usage description
- MiXplorer text Editor usage description
- MiXplorer code Editor usage description
Many things can be learned by exploring the app, most UI elements have a function, long press is your friend.
----------------------------------------------
----------------------------------------------
LINKS TO FAQ SECTIONS
i. INTRODUCTION, GETTING MIXPLORER, & INSTALLATION (This post)
ii. UI, NAVIGATION, VIEW CONFIGURATION, BOOKMARKS, TABS
iii. WORKING WITH FILES & FOLDERS (Copy Move methods, Trash option)
iv. FTP, HTTP, TCP SERVERS
v. MiX NUGGETS (Freestanding Topical Posts)
vi. THEMES and SKINS
vii. BUG REPORTING, TROUBLESHOOTING, AND FAQ WIP
MiX Nugget - Settings Overview: https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-82834917
Themes and Skins
vi. SKINS and THEMES
Before getting to detailed skinning and theming, here are a few customizations which can be made outside app, skin, and theme settings,
View Customization (more in Skins/Themes)
Disable Thumbnails (folder specific}: Place image in folder > rename to .nothumbnail
Custom Folder Icon (folder specific): Place image in folder > rename to .foldericon
Custom Folder Icon Preview (folder specific): Place image in folder > rename to. preview
Notes:
- Some image properties may not function properly. Icons can be optimized here: https://tinypng.com/
- Some of these may depend on a related setting within the app (eg .preview file and setting "Auto folder preview")
Onward to Skins and Themes
Note: Thanks @FatalBulletHit for the excellent materiel and re-write of this post.
There are 2 ways to change the look of the MiXplorer UI: Skins, and Themes.
Skins:
- Skins primarily involve the colours of various elements, font parameters (eg bold/normal), icon parameters (eg round/square). There are many elements to keep track of but this is all accessible through the MiXplorer UI. Modifying skins can be done within the MiXplorer app by going to: 3 Dot menu > Settings > Skin. Until you learn the various elements, testing small changes incrementally may be advisable and is a good way to explore. eg Make one element bright red then check the UI to see what changed. Lather, rinse, repeat with different elements.
Here are some sources of custom skins and or discussion about them:
• Themes by @djdarkknight96
• Themes by @TerrorFlatRider
• Themes by Vladimir
• Windows Fluent Design theme by @marciozomb13
• Material Design theme by @marciozomb13
• Theme Corporate
• Guillaume Skins Gallery
• YandLiu Skins Gallery
• Skins by @scohut
There are also some skins at the MiXplorer website: https://mixplorer.com/skins/
To select a skin: Settings - Skin - <select skin>
To create new skin (based on default skin): Settings - Skins - Add - New
To modify an existing skin: Settings - Skins - <pencil> - Edit
Skin documentation: You can find a somewhat in depth documentation by @FatalBulletHit in this FAQ post: https://forum.xda-developers.com/showpost.php?p=78541319&postcount=733.
Preview:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To save a new or modified skin:
- To save a skin for the first time: Tap "save" then enter the name of the skin and the author.
- To save after modifying an existing skin, tap save (name/author will not be requested again.)
To export skin (2 ways):
- Settings - Skins - <pencil> - Export - clipboard.
This exports the skin to clipboard. The clipboard contents can be pasted into a text file and saved, or pasted into a new MiXplorer installation.
or
- Settings - Skins - <pencil> - Export -
This saves the skin as an importable .mic file.
To install skin (2 ways):
- Copy skin values from a text file into buffer, or have them in buffer from previous export to clipboard.
- Settings - Skins - Add - Clipboard
or
- Navigate to and select a <skinname>.mic file than select "Import"
----------------------------------------------
Themes
- Themes yield an even wider range of potential UI changes which are made by modifying the actual resources (files and other graphic aspects) with which the UI is constructed and displayed during use. Creating themes requires some understanding about the resources themselves and how to perform some intermediate file management tasks but it is not very hard to do.
- Custom can be found and discussed a few places (and as with any other MiX discussion is welcome here as well). Note, some of these links may beduplicates of the ones listed above.
@djdarkknight96's thread:
Announced here: https://forum.xda-developers.com/showpost.php?p=76812709&postcount=25259
Direct link here: https://forum.xda-developers.com/showpost.php?p=76812645&postcount=1
@TerrorFlatRider's thread:
Announced here: https://forum.xda-developers.com/showpost.php?p=76816946&postcount=25262
Direct link here: [Themes] MiXplorer Themes by TerrorFlatRider; https://forum.xda-developers.com/showpost.php?p=76816946&postcount=25262
Themes from Vladimir:
Announced here: https://forum.xda-developers.com/showpost.php?p=78240950&postcount=26780
Direct link here: https://drive.google.com/drive/folders/1rPYLPtJGeu9iwPCTasT_f2K86uVho7pU
Theme by @mhz
https://forum.xda-developers.com/an...-theme-mhz-t4147783/post83616953#post83616953
Themes from @scohut:
Announced here: https://forum.xda-developers.com/t/...y-featured-file-manager.1523691/post-87994659
Direct link here: https://drive.google.com/drive/folders/1T-WGNypfd1wi-TXx8ekPRq_p7HDanCHs
New (as of December 2020) MiX Theme-ing thread by @TheMystic: [Tutorial] MiXplorer – Themes & Skins – How to make them? https://forum.xda-developers.com/t/tutorial-mixplorer-themes-skins-how-to-make-them.4202319/
Sample theme which could be used as a template. https://forum.xda-developers.com/showpost.php?p=76629263&postcount=25049
To install a Theme: Open MiXplorer (must be MiX, not other file manager) > tap theme mit file > tap import.
To remove/revert theme to default: Settings > More Settings > Reset > Theme.
Note: When installing or installing themes it is best to first revert to the default skin as well.
For historic purposes and just in case it is recreated here are details about the earstwhile original skins gallery:
"Skins may be uploaded or downloaded from the Skins gallery (where there are instructions about how to upload your own skin and apply skins). http://gallery.asymmetrics.nl/index...io5NTZmNzliOTMzOWY4ZDRlYmM3ZjQxNWZjYzE2ZjI3Yg." There are many nice user contributed skins in this gallery. There may be others shared in various posts in the MiXplorer threads.
----------------------------------------------
----------------------------------------------
LINKS TO FAQ SECTIONS
i. INTRODUCTION, GETTING MIXPLORER, & INSTALLATION (This post)
ii. UI, NAVIGATION, VIEW CONFIGURATION, BOOKMARKS, TABS
iii. WORKING WITH FILES & FOLDERS (Copy Move methods, Trash option)
iv. FTP, HTTP, TCP SERVERS
v. MiX NUGGETS (Freestanding Topical Posts)
vi. THEMES and SKINS
vii. BUG REPORTING, TROUBLESHOOTING, AND FAQ WIP
MiX Nugget - Settings Overview: https://forum.xda-developers.com/t/mixplorer-q-a-and-faq-user-manual.3308582/post-82834917[/B][/SIZE]
- vii. BUG REPORTING, TROUBLESHOOTING, AND FAQ WIP
----------------------------------------------
Bug Reporting:
Please report bugs in the primary MiXplorer thread here: http://forum.xda-developers.com/showthread.php?t=1523691.
Bug reports should come from the newest beta version of the app. If you notice a bug in the newest release version then check the newest beta. If it also occurs in the beta then log it from there.
Bug reports should include. details about your device (Android version, ROM version, Root status, SU method, MiXplorer version) as well as a step by step description of how to reproduce the issue and a log taken while the issue was reproduced.
----------------------------------------------
MiXplorer's Built-in Logging:
Enable MiXplorer logging: Settings . More settings . Logging (enable)
MiXplorer has a native logging feature. If logging is enabled (as it is by default) then the most efficient and the recommended way to do it is the following:
- After crash or after experiencing issue,
- Open MiXplorer
- 3-dots menu
- Send log.
If you have disabled logging in the past, or you if are diagnosing more complicated issues or if you will be reviewing the logs yourself before sending. Here is a manual method that some people use:
- Enable MiXplorer logging.
- Close MiXplorer.
- Open MiXplorer.
- Reproduce the issue.
- Close MiXplorer.
- The logs should be in /storage/emulated/0/Android/data/com.mixplorer/cache/log/ (The path may vary slightly depending on ROM).
- Use alternative file manager (just for this ) to get most recent log in folder.
- If using MiXplorer to get the log manually, then make sure to get the log for the previous MiXplorer session rather than the one for the current session.
Testing and Logging Notes:
- Reproduce and log issues in a new session of MiXplorer that was started after logging has been enabled. In other words: Enable logging, then close MiXplorer, then start MiXplorer to reproduce the issue and send the log. A new log is created each time you open MiXplorer. Note: - In some cases it is recommended to test the issue in a clean installation of MiXplorer (after uninstalling MiX then reinstalling it).
- The MiXplorer log directory will not appear until MiXplorer logging has been enabled at least once since last new installation of MiXplorer. Also, if MiXplorer is uninstalled the log folder will be deleted, so if you are getting logs manually during repeated tests remember to do so before next uninstall.
- Before sharing logs it is a good practice to review them for information that you don’t want to share, and to delete that information or replace it with an obvious label, eg <thing x deleted>. To each their own about what to delete, but reviewing logs with privacy in mind before sending is prudent.
- For logging more complex issues, or certain types of FCs where native app logging does not catch the error, a full system log (logcat) may be needed. The app "MatLog" (formerly "CatLog") from Play Store https://play.google.com/store/apps/details?id=com.pluscubed.matlog&hl=en can be used to capture logcats on the device. If an issue is causing reboots then the log might have to be taken from a USB connection on a computer via ADB.
- When you share the log, also share the following:
1) Full details of the device including: Android version, ROM version and variant, Root status, SU status, busybox status.
2) A detailed description about how to reproduce the error when logging so others may try to reproduce it.
----------------------------------------------
LINKS TO FAQ SECTIONS
i. INTRODUCTION, GETTING MIXPLORER, & INSTALLATION (This post)
ii. UI, NAVIGATION, VIEW CONFIGURATION, BOOKMARKS, TABS
iii. WORKING WITH FILES & FOLDERS (Copy Move methods, Trash option)
iv. FTP, HTTP, TCP SERVERS
v. MiX NUGGETS (Freestanding Topical Posts)
vi. THEMES and SKINS
vii. BUG REPORTING, TROUBLESHOOTING, AND FAQ WIP
[Q] How to create a .zip file and sign it in MiXplorer? I've downloaded the zip viewer plugin but cannot create .zip file
Preet_ said:
[Q] How to create a .zip file and sign it in MiXplorer? I've downloaded the zip viewer plugin but cannot create .zip file
Click to expand...
Click to collapse
1. Select files you want to zip
2. Press 3 dots (menu)
3. Press Archiv
4. Paste icon will show
5. Select again Archive in paste menu
I don't remember correctly but it's like this something.
Good Luck!
Sent from my XPERIA M2 using Tapatalk
Preet_ said:
[Q] How to create a .zip file and sign it in MiXplorer? I've downloaded the zip viewer plugin but cannot create .zip file
Click to expand...
Click to collapse
You can create a zip file even without the archive add-in by following a workflow similar to file copy/move operations (and this should also work with the add-in).
- Select some items that you want to put in a zip file.
- Open the overflow menu (3 dots).
- Select "Archive" (the task will be added to the task list just as file copy/move tasks would be)
- Navigate to the location to where you want to save the zip file.
- Open the task menu then select the pending ARCHIVE task.
- Choose the archive options: File type (zip, 7z or tar), level of compression, key (optional), and the split length (optional) then select OK.
I'm not sure exactly what is the the purpose of the archive add-in but have read in the main MiXplorer thread that it handles .RAR files. Maybe some of the MiXplorer regulars can provide a more detailed description if it, which could then be added to the FAQ.
Dzepar said:
1. Select files you want to zip
2. Press 3 dots (menu)
3. Press Archiv
4. Paste icon will show
5. Select again Archive in paste menu
I don't remember correctly but it's like this something.
Good Luck!
Sent from my XPERIA M2 using Tapatalk
Click to expand...
Click to collapse
LOL I type too slow (and got distracted by a phone call while posting an answer) Thanks.
Thanks @Dzepar and @IronTechmonkey !
Thanks for the manual, MiXplorer is great:good:
FTP and paths on SD cards.
Every now and then I test all the possible paths to Internal and External SDs via FTP. With some lingering SD card access issues recently resolved, now seems like a good time to repeat the routine.
In L5.1.1/CM12.1, SuperSU 2.65 (recent Playstore update of flashed SuperSU 2.46), Selinux = permissive, MiXplorer v6.1.4.BETA_B1602294, Filezilla 3.11.0.2 FTP client connecting to MiXplorer FTP using active tab at / as top level, copying a 15MB PDF through a variety of paths:
/storage/sdcard0, and /storage/emulated/legacy, and /sdcard: File copy is successful to root of internal SD but no contents shown at these paths in FTP client. Viewing same location via /storage/emulated/0 shows the copied file and all other expected content. A bad thing about this is that copying the file again by the same method overwrites the existing one without a prompt. I verified this by copying a different file of different type and size but with same filename.
/storage/emulated/0: File copy is successful to root of internal SD..
/external_sd: File copy is successful to root of external SD.
/storage/sdcard1: File copy is successful to root of external SD.
/mnt/media_rw/sdcard1: File copy is successful to root of external SD.
/mnt/shell/emulated/0: File copy is successful to root of internal SD.
/mnt/shell/emulated/legacy: This is a weird one. File copy is successful but this path is not linked to any other location and the copied file is there alone when viewed via FTP or in MiX on device. Not a problem, just interesting, maybe a quirk of the ROM.
[Q]How to export album cover? I was only find add it.
YexuanXiao said:
[Q]How to export album cover? I was only find add it.
Click to expand...
Click to collapse
This is hard to answer with so few details about the situation. Export from what? Are you using the latest version of MiXplorer. Can you provide a screenshot?
YexuanXiao said:
[Q]How to export album cover? I was only find add it.
Click to expand...
Click to collapse
I don't think it's possible to export it. You can change/replace it but not exported. Unless I don't know how
@IronTechmonkey
I think he meant of this:
Sent from my XPERIA M2 using Tapatalk
Dzepar said:
I don't think it's possible to export it. You can change/replace it but not exported. Unless I don't know how
@IronTechmonkey
I think he meant of this:
Sent from my XPERIA M2 using Tapatalk
Click to expand...
Click to collapse
Another as yet unexplored area of MiXplorer for me. Thanks! Just for kicks I played with this for a bit. I was able to replace album art for an MP3 and restore it to the original. The "Remove" button had me thinking I could remove the original album art but it only works to remove a custom image and restore the original. Although the "Remove" button might be more descriptive if it was named "Restore" the behavior of protecting the original material seems normal, although I can remove album art from same file on PC with dBpowerapm's tag editor. Maybe there is a feature request in there somewhere but there are more important things being requested now.
As to @YexuanXiao's question, I did some searching and could only find a references to linux command line functions and some PC utilities that might be able to do this but nothing ready-made for Android.
I'm bad with numbers but I think it was added after media player was added it's very handy tho I do all my edits on pc this is great for quick edit.
Sent from my XPERIA M2 using Tapatalk
Thank you for the great work!
XVacuum Firmware
Flashing firmwares and sound packages from your smartphone (Android and iOS)
Roborock v1/v2(S50/51/55), T6, S6, 1S, T7, Q7 are supported.
The first and second generations have common language packs. The third (T6, S6, 1S) has its own packs.
Android:
(only pkg is supported, neither 7z, nor zip, nor rar but only pkg in the unarchived view; as for sound packages, be aware that wav-files in an archive isn't a pkg-package). These packages should be opened only from the internal storage (/sdcard). It will better if you place packages into root folder. Also avoid any special characters in file names, as the robot isn't able to download such files.
iOS:
Firmwares and sound packages must be placed in Documents folder of the application by iTunes (Shared Files section), iTools, iFunbox or other similar applications. (only pkg is supported, neither 7z, nor zip, nor rar but only pkg in the unarchived view; as for sound packages, be aware that wav-files in an archive isn't a pkg-package). Also avoid any special characters in file names, as the robot isn't able to download such files.
At the moment, there are two ways (see below):
Without Wi-Fi reset of the robot (you need to get the token by any available ways).
With Wi-Fi reset (the application will get the token by itself)
The instruction without Wi-Fi reset (you need to get the token by any available ways):
Launch the application.
Click the menu and then Settings.
Fill the IP and token of the robot.
Click the "Save" button.
The application will ask you to restart the application for applying the settings, kill the application:
Android: double click to "Back" button or click "Exit" from the menu.
iOS: double click to "Home" button and swipe up the application to kill it.
Launch my program again. The program is written for "blondies": there is almost no way to make mistakes. It consists of two buttons (firmware and sound), and that's all. An "About" menu is also available should you want to know more about me and contribute to the project.
The buttons will be inactive until the program has established connection with the robot and received a status.
As soon as the status have arrived, the buttons become active and you can start flashing the robot.
Choose a firmware or sound package.
Notice the log under the buttons and rejoice at the quick and easy flashing.
If you got an error:
"timeout: Could not connect to the vacuum, handshake is timeout", it means that you filled the invalid IP of the robot.
"timeout: Call to the vacuum timed out" after 50 tries to get the status, it means that you filled the invalid token.
"timeout: Call to the vacuum timed out" after 50 tries of flashing a firmware, it means that your cleaner doesn't support local updates (it was blocked 4004 and higher for the first generation, 1910 and higher for the second generation, the third generation was blocked always). The first and second generation can be reseted to the factory firmware if it is below 4004 for the first generation, below 1910 for the second generation. https://support.roborock.com/hc/en-us/articles/360035372632-How-to-reset-Roborock-to-factory-default
The instruction with Wi-Fi reset (the application will get the token by itself):
You need to reset the Wi-Fi settings of the robot to use this program (you will need to add the robot to MiHome again after all processing is complete).
For the first version: press the "Home" and "Power" buttons simultaneously within 3 seconds.
For the second version: press the "Spot Clean" and "Home" buttons within 3 seconds.
Your robot should say that Wi-Fi is reset and a new access point should appear in your smartphone. Connect to it.
Disable your mobile internet because some phones ignore Wi-Fi unless it provides an internet connection.
Launch my program. The program is written for "blondies": there is almost no way to make mistakes. It consists of two buttons (firmware and sound), and that's all. An "About" menu is also available should you want to know more about me and contribute to the project.
The buttons will be inactive until the program has established connection with the robot and received a token and status.
As soon as the token and status have arrived, the buttons become active and you can start flashing the robot.
Choose a firmware or sound package.
Notice the log under the buttons and rejoice at the quick and easy flashing.
After all processing is complete, you will need to add the robot to the MiHome.
Attention!
Due to the built-in file manager, Play Protect considers the application potentially dangerous and doesn't allow most users to install it. To install the application anyway:
1. Open "Play Market".
2. Tap on "Play Protect" in the menu.
3. Disable the "Check security risks" option during the installation of the application.
Android:
Download the application: View attachment XVacuum Firmware 4.1.0 - Andoid 4.4+.zip (unpack it before using)
Developer: .//Hack
Minimal version of Android: 4.4
iOS:
Download the application: View attachment XVacuum Firmware 4.1.0 - iOS 9.0-15.2.zip (unpack it before using)
Developer: .//Hack
Minimal version of iOS: 9.0
If you don't have JailBreak use Cydia Impactor.
If you have wav-files and want to make a pkg file, just use my program wav2pkg (Windows) - below.
Do you want to thank the developer financially?
Details
Tinkoff card: 5536 9137 9197 1969
Sberbank card: 2202 2007 1004 4098
Kykyryza card: 2 9603257 90117
Ozon card: 2 2302318 050546
PayPal: [email protected] (EUR, USD, RUR)
Yandex.Money (YooMoney): 41001365201505
WebMoney:
- WME: E266145873860
- WMZ: Z130755667036
- WMR: R830172982278
History
04.01.2022 (4.1.0)
The application works better with the third generation (1S, T6, S6, T7, S5 Max and etc.)
Updated the bank accounts.
iOS8 is out of date now to support the maximum version range (9.0-15.2).
Small fixes.
18.01.2020 (4.0.0)
The application tries to reconnect in any way possible in a case when the connection is lost.
If regional lock is activated the application tries to disable it few times. On failure, it displays an error to the log.
Fixed working after waking up from sleeping on iOS. Previously, you need to restart the application.
Requests to a vacuum work faster now.
Many small fixes
21.09.2019 (3.3.0)
The path to the selected file is displayed in the log
08.09.2019 (3.2.0)
The information about the vacuum is got in the background mode
Small fixes
25.08.2019 (3.1.2)
Added information about a vacuum to the log (Model, Firmware and IP)
Disabling the regional lock to have able to flash a firmware without the regional lock
Small fixes
24.07.2019 (3.0.1)
Small bug fixes
Added information about support for Roborock v3 (T6, S6, 1S)
09.06.2019 (3.0.0)
You can flash the robot without Wi-Fi reset (the IP and token must be filled in the setting from the menu, after saving, the setting you need to restart the application).
Logs are extended. It will show more information in case of unexpected errors.
Now, the bank details can be copied by the click on the neded line.
In case of success flashing, a window with information about me will be shown.
31.03.2019 (2.2.0)
Fixed the log block collapse.
Small fixes: mainly for iOS.
25.03.2019 (2.1.1)
Small fixes and iOS version.
14.01.2019 (2.1.0)
The code is significantly refactored and compressed.
14.01.2019 (2.0.0)
Now the application has a built-in file manager. You can select only pkg (many people tried to flash everything except pkg, not understanding what they did wrong). The "Back" button closes the file manager but does not move up one level. I'll add it in next versions.
Added new bank details to the "About" window.
13.01.2019 (1.0.2)
Now the socket closes together with the application. You won't get the error EADDRINUSE (Address already in use) when you restart the application.
12.01.2019 (1.0.1)
The window "About" can be closed with the "Back" button.
The menu can be closed with the "Back" button.
The application is now compressed at less than 1MB.
Added the current version to the "About" window.
Minimal version of Android is 4.4 (most likely the log block will be collapsed on Android 4-5, so you can see one line only).
9.01.2019 (1.0.0)
The first released version.
Known issues
java.net.BindException: bind failed: EADDRINUSE (Address already in use): or similar errors with "Address already in use" can occur if other programs use the 8080 and 8081 ports. If you cannot identify such a program, just close all programs and restart XVacuum Firmware.
If your phone has gone to the sleep, most likely the phone will stop accepting connections. The robot will return an error, since it won't be able to download the firmware;
The "Back" button closes the file manager but does not move up one level.
[Android]A file can be chosen from the internal storage (/sdcard) only
wav2pkgThe program converts wav-files to pkg-package and backward (Windows)
Unpack the program to the root of any disk (advanced users: the path must not contain any spaces or non-Latin symbols). For example: C:\wav2pkg
The instruction to make pkg-package:
Place all folders with wav-files to the "voicepacks" folder. The folders must contain only Latin symbols, digits and/or underscores. You can place any number of folders. The program converts them into separate pkg files. The path must be, for example, C:\wav2pkg\voicepacks\english\*.wav
Launch wav2pkg.bat from the wav2pkg folder
The program will start displaying information about the progress of the conversion.
Produced packages will be placed into the "voicepacks" folder and carry the names of the folders that they were converted from.
You don't need to remove pkg-files before the next launch of the program.
The instruction to extract wav-files from pkg-package:
Place all pkg-files to the "pkgs" folder. The packages must contain only Latin symbols, digits and/or underscores. You can place any number of packages. The program extracts them into separate folders. The path must be, for example, C:\wav2pkg\pkgs\english.pkg
Launch wav2pkg.bat from the wav2pkg folder
The program will start displaying information about the progress of the conversion.
Produced wav-files will be placed into folders which carry the names of the packages that they were extracted from and they will be placed into the "pkgs" folder.
You don't need to remove folders before the next launch of the program.
Download: View attachment wav2pkg.zip
Russian community of flashing of this vacuum robot
Does no one need this? Or maybe did I place the thread in the wrong forum's section? Because the thread in the russian community is very hot. The application was downloaded more than 4000 500 000 times.
Could you please explain for what I need this? I have this s50 robot, but I don't know the exact purpose of this topic. I have eu version and english voices. There is some modifications or funny voices?
.//Hack said:
Does no one need this? Or maybe did I place the thread in the wrong forum's section? Because the thread in the russian community is very hot. The application was downloaded more than 4000 times.
Click to expand...
Click to collapse
Thank you now have ssh access. Looking for some language packs now : )
Work perfectly on Gen1 !
I flashed this french sound pack
(thank Pierre in comment: link)
Thanks buddy!!! Finally found a thread in English that covers firmware flashing.
I have the Gen 2 (s50) international version and want to flash to China version in order to connect to China server.
Where do I find the latest China version firmware for s50?
Sent from my iPhone using Tapatalk
Does anyone have all the instruction lines for sound pack? I am making a pkg for dutch. I have the instruction lines for error 1-19. But I still need to have english instructions for some commands. I hope someone can help me. Otherwise how can i extraxt a pkg, so I can see what wav files are inside the pkg?
Thank you.
Dutch voice pack/Nederlandse stem
I made a dutch voice pack/Nederlandse stem voor Mi Robot Vacuum/Roborock.
https://drive.google.com/open?id=1Ttd8F0Xa2n5jrpgOMdJEkc6VzB2axFMC
I used the list with the sound instructions from here: https://4pda.ru/forum/index.php?showtopic=881982&st=3980#entry83141327
Thank you for this great apk to transfer the pkg to the vacuum cleaner.
I updated the application. I have added support of iOS
S6 FW
Any lockout for flashing s6 FW to T6 machine? Plz
mikaelivalbo said:
Any lockout for flashing s6 FW to T6 machine? Plz
Click to expand...
Click to collapse
Sorry, 1S, t6 / s6 have different encryption keys. At the moment, nobody knows them.
Thanks for the app, but I'm waiting for it to be compatible with vacuum 1s. I try this but can't send voices (the token captures ok).
I read in last post I read that isn't posible
When somebody get access to the filesystem of the vacuum and find the encryption keys We'll can make voice and firmware packs for the vacuum. Now we can flash original packs only.
.//Hack said:
When somebody get access to the filesystem of the vacuum and find the encryption keys We'll can make voice and firmware packs for the vacuum. Now we can flash original packs only.
Click to expand...
Click to collapse
Thank you! we will wait.
@.//Hack
Please link to XVacuum Firmware 3.0.0.apk
Ubimo said:
@.//Hack
Please link to XVacuum Firmware 3.0.0.apk
Click to expand...
Click to collapse
Sure, I'm going to update. Maybe today or tomorrow.
Ubimo said:
@.//Hack
Please link to XVacuum Firmware 3.0.0.apk
Click to expand...
Click to collapse
Done!
The application is updated (3.0.1)
Enjoy!