Hi my friends. İ have a cube i7 remix tablet. But i have a problem. now I have the ROM on my tablet 2015092001. I want to go back to the original rom but is getting the error. I've got another problem battery-running late and 40% if it drops below emptying quickly. ROM below error.(I'm sorry for bad English:crying::crying
[FAILURE] OS flash failure ADB ENUM failed
Status Messages:
01/29/16 15:59:36.168 INFO : Ready to flash!
01/29/16 16:00:24.095 INFO : do_new_medfield_device STARTING TO FLASH
01/29/16 16:00:24.116 INFO : Port 0/0/1 #0: DNX/droidboot phase - SN : Baytrail823C2013
01/29/16 16:00:34.524 INFO : Port 0/0/1 #0: Booting to droidboot.img success - SN : Baytrail823C2013
01/29/16 16:03:29.624 ERROR : Port 0/0/1 #0: Device on port 0/0/1 #0 timeout to enum adb (TIMEOUT = 180)
Related
Hello all ,
I linked a serial cable to my allwinner a20 based Android Tv box.
It can not pass after the boot logo and next is all what it display in serial console.
Somebody pelase help i need to reisntall linux on it ,if you knwo any u boot keys that i have to press on the uboot serial consoel pelase help.I tryed to press ransom keys but i see nothin.
Here is all i see when it start:
====================================
HELLO! BOOT0 is starting!
boot0 version : 3.0.0
dram size =512
sum=0x9c3bd8cf
src_sum=0x9c3bd8cf
Ready to disable icache.
Jump to secend Boot.
[ 0.133]
U-Boot 2011.09-rc1-dirty (Nov 08 2013 - 11:06:32) Allwinner Technology
[ 0.141]version: 1.1.0
[ 0.144]pmbus: ready
axp read error
probe axp20x failed
axp_probe error
boot_clock = 912
dcdc2_vol = 1400
axp set dcdc2_vol to 1400 failed
dcdc3_vol = 1250
ldo2_vol = 3000
ldo3_vol = 2800
ldo4_vol = 2800
power_start = 0
storage_type = -1
usb_recovery = 0
find power_sply to end
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[ 0.293]DRAM: 512 MiB
relocation Offset is: 15b27000
user_gpio config
user_gpio ok
DRV_DISP_Init: opened
[ 0.560]boot_disp.output_type=2
[ 0.563]boot_disp.output_mode=5
[ 0.567]boot_disp.auto_hpd=1
workmode = 0
[ 1.871]NAND: NAND_UbootInit
NB1 : enter NAND_LogicInit
nand : get id_number_ctl from script, 3
not burn nand partition table!
NB1 : nftl num: 3
init nftl: 0
NB1 : NAND_LogicInit ok, result = 0x0
[ 2.381]sunxi flash init ok
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:12-
-name- -start- -size-
bootloader : 1000000 1000000
env : 2000000 1000000
boot : 3000000 1000000
system : 4000000 20000000
recovery : 24000000 2000000
databk : 26000000 2000000
misc : 28000000 1000000
private : 29000000 1000000
sysrecovery : 2a000000 21000000
data : 4b000000 40000000
cache : 8b000000 17000000
UDISK : a2000000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
recovery key high 6, low 4
cant find fstbt value
Fastboot detected, will boot fastboot
to be run cmd=run setargs_nand boot_fastboot
the user data'magic is bad
WORK_MODE_BOOT
board_status_probe
sunxi_bmp_display
WORK_MODE_BOOT
[ 2.509]Hit any key to stop autoboot: 0
run usb fastboot
sunxi_fastboot_init
recv addr 0x41000000
send addr 0x582580a8
delay time 0
usb init ok
------------------------------------------------------------------
After this nothing .Please help me
After searching all google and reading documantation ,I contacted the box seller and he gied me the files i neeeded.
I used a image file named sun7i_A20v2.0_android_sugar-ref001_2014.09.04_TakenYBSJ.img and a windwos software to flash it via usb named PhoenixPacketV333
To flash teh device you muist hava a serial console to the box (veru easy to do if you have the cable ) ,and keep pushed the key 2
on serial consle (putty) while powering the device ,so it enter in fel mode ( something like recovery mode ,it accept usb connection) .Then oyu need a usb male to male cable to conect the android tv box usb port to the windows usb port ,and start flasing using the PhoenixPacketV333 software.
If somebody needs more help or files just write here I check daily .
have a nice day all!
my phone model- CENTRIC CM2221
android -6.0
problem- no service
i check imei blank and baseband unknown .
how to solve ?
please provide me stock rom or good solution ..
Phone Info Log .........
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 16 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D333238E8020042AF2EBAF4
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D420002E8F4BA73AF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xEF0B331D1BA71095953C8F7CFAA875FB
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
You cm2 to Repaire baseband
Sent from my iPhone using Tapatalk Pro
abuk91 said:
You cm2 to Repaire baseband
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
bro allready try but not done .....need flash file
no solution????????????????????????????????????????????????????????????
I have the same problem
phone accent neon no service imei not found
I'm looking for rom file for this model
Hi, help, please, deal with this device. When enabled, the usb logo appears and the CloverviewPlus Device and Intel Soc USB Driver appears in the device manager. I'm trying to flash the service firmware using the xFSTK-Downloader program on the CLVP A0 / B0 / B1 tab (in the settings indicated gp flag 0x80000245, which looked in advance in the file flash.xml), and also indicated:
FW Dnx - PV_DUCATI_Fw_DnX_20.30_CEAD_signed.bin
IFWI - PV_DUCATI_IFWI_vF9.E1_CEAD_factory.bin
OS DnX - PV_DUCATI_OS_DnX_20.30_CEAD_signed.bin
OS Image - DUCATIT-droidboot.PV.img.POS.bin
I click Begin and an error appears. The last lines of the log (SN = ***):
XFSTK-LOG - USBSN: *** - usb_bulk_read () fails
XFSTK-LOG - USBSN: *** - Windriver Error: 0x20000015, Timeout expired
XFSTK-LOG - USBSN: *** - Device is not responding ...
XFSTK-LOG - USBSN: *** - GetAck - (0xBAADF00D)
XFSTK-STATUS - USBSN: *** - Unknown Ack code: baadf00d, aborting ...
XFSTK-LOG - USBSN: *** - void CloverviewPlusDownloader :: do_abort ()
XFSTK-LOG - USBSN: *** - Abort
XFSTK-STATUS - USBSN: *** - FAIL
XFSTK-STATUS - USBSN: *** - Errors encounter during OS download. Aborting ...
Help to achieve the entrance to the fastboot and recovery.
damondiamond1 said:
Hi, help, please, deal with this device. When enabled, the usb logo appears and the CloverviewPlus Device and Intel Soc USB Driver appears in the device manager...
Click to expand...
Click to collapse
I don't have this device but, I believe that one or more of the the following threads may be helpful for what you need and, if needed, post your question within one of them.
https://forum.xda-developers.com/showthread.php?t=3225914
https://forum.xda-developers.com/showthread.php?t=2975096
https://forum.xda-developers.com/showthread.php?t=2975462
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
What could be the problem ..
Operation : Identify [ v2.18 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : MEID : 84E1311723E5F72DDF767B7B831BD757
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SP.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 45000170414934456E0101344F2524D7
DAInf: 4 : 2 : 156
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 70010045453449413401016ED724254F
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
DRAM : 0x0178
EMI : DEV : MT6752
EMI : SRC : preloader_k80hd_bsp_fwv_512m.bin
EMI : CNT : 0003
EMI : [00] : ID : 700100454534454134 : VEN : KINGSTON | DEV : EE4EA4 : RAM : [ 512.00 MB ]
EMI : [01] : ID : C80111344D45594D41 : VEN : UNKNOWN | DEV : 4MEYMA : RAM : [ 512.00 MB ]
EMI : [02] : ID : 700100454534494134 : VEN : KINGSTON | DEV : EE4IA4 : RAM : [ 512.00 MB ]
EMI : Init EMI from PRELOADER
INIT : 0xBC : DRAM [ 0x00000000 : [ 0 B ] ]
DRAM : DRAM: 0x20000000 [ 512.00 MB ]
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info
EMMC: 70010045453449413401016ED724254F
EMMC: VEN : KINGSTON | OEM : 01 | DEV : EE4IA4
EMMC:
BOOT1 : 0x00200000 [ 2.00 MB ]
BOOT2 : 0x00200000 [ 2.00 MB ]
RPMB : 0x00080000 [ 512.00 KB ]
USER : 0xE2000000 [ 3.53 GB ]
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : C936D9FF3A84D90E7B2010FA5212EA26
STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT
DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9
Boot done!
Patch Level : O11019
Display ID : O11019 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-09-05
Build Time : 23.08.2019
Product Model : Kicka_4_Plus
Product Brand : MobiWire
Product Name : Kicka_4_Plus
Product Device : Kicka_4_Plus
Product Manfct : MobiWire
Product Info : k80hd_bsp_fwv_512m
Board Platform : mt6580
Product Board : VP402_Mobiwire_Kicka4Plus
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
Done!
Elapsed: 00:00:30
Operation : HW Test [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 1 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.2018-04-25.11:26_437806
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 70010045453449413401016ED724254F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 4AI4E
[eMMC] : FLASH_CID : 70010045453449413401016ED724254F
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E2000000
[eMMC] : FLASH_UCP : 3616 MiB [eMMC 4 GiB]
DEV RID : 0x4EA014B2FFD936C90ED9843AFA10207B
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Processing Miscellaneous test
MSC : BatteryLevel : 3009 mV
[Processing] FlashMemory Read-Write test
[eMMC] : [KINGSTON] , 4AI4E , 0xE2000000 , 3616 MiB
[eMMC] : CID : 70010045453449413401016ED724254F
[eMMC] : MODE : SQ-WR
[PASSED] : eMMC RW Check #1 Ok!
[eMMC] : MODE : RA-WR
[PASSED] : eMMC RW Check #2 Ok!
[eMMC RO CHECK] : eMMC Ok! READ-WRITE Passed!
[Processing] RAM Read-Write test
[DRAM] : 0x20000000 , 512 MiB
[DRAM] : ADDRESS BUS test
[PASSED] : Bus Count : 0x1C
[DRAM] : DATA BUS test
[PASSED] : Bus Count : 0x1F
[DRAM] : PATTERN test
[PASSED] : PATTERN Ok
[DRAM] : INCDEC test
[PASSED] : INCDEC Ok
All Done!
Done!
Elapsed: 00:01:40
Reconnect Power/Cable!
I wanted to upload new rom to my Nokia TA-1188 via SP_Flash_Tool-5.1916_Linux.
Rom: https://drive.google.com/uc?id=1ORCq7T2H8ECCjqd4SDn9uODsGhKFcoff&export=download
and I have error:
$ ./flash_tool.sh
QObject::moveToThread: Cannot move objects with a parent
support_dl_cert_to_storage: 0
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
[email protected]/devices/pci0000:00/0000:00:14.0/usb3/3-1
[email protected]/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0
[email protected]/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/tty/ttyACM0
vid is 0e8d
device vid = 0e8d
pid is 0003
device pid = 0003
com portName is: /dev/ttyACM0
Total wait time = -1665148920.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
BROM connected
Downloading & Connecting to DA...
connect DA end stage: 2, enable DRAM in 1st DA: 0
DA Connected
executing DADownloadAll...
Stage:
[0] WRITE TO PARTITION [ preloader ]
Stage:
[4] WRITE TO PARTITION [ custom_a ]
Download failed.
Disconnect!
BROM Exception! ( ERROR : STATUS_SEC_IMG_TYPE_MISMATCH (-1073610710) , MSP ERROE CODE : 0x00.
[HINT]:
Verified boot is enabled.
Please download signed image(custom_a-verified.img) or disable verified boot.)((exec,../../../flashtool/Cmd/DADownloadAll.cpp,84))
Click to expand...
Click to collapse
and now I can't start fastboot mode on the phone and the phone can't be turned on.
I try:
- Vol- and usb kable to computer - 30s wait - nothing
- power on buttom - 60s wait - nothing
- https://forum.xda-developers.com/t/hard-reset-nokia-2-2.4000739/#post-81795587 - nothing
What did I do wrong and how to fix it?
Is my phone just for trash, or is it possible to get it working somehow?
Help please.