Related
CyanogenMod 12.1
Code:
I'm not responsible for bricked devices, dead SD cards, thermonuclear war,
or you getting fired because the alarm app failed. Please do some research if you
have any concerns about features included in the products you find here before
flashing it! YOU are choosing to make these modifications, and if you point the
finger at me for messing up your device, I will laugh at you.
Note: If you're on Miui 7, flash the following stock ROM zip before flashing any of the custom ROM available on the forum.
https://basketbuild.com/filedl/devs?dev=thewisenerd&dl=thewisenerd/ferrari/firmware-lp-6.6.10.0.zip
Downloads:
Release 3 by @thewisenerd using @dh.harald 's kernel and device tree.
Release 2
Release 1 (md5)
What's working/features:
Everything
No random reboots/shutdowns
Clash of Clans working awesome
Compiled with Uber toolchain for better performance
Sensors working out of the box (no need to flash sensor patch)
Hardware double tap to wake
Stock kernel with patches from @intersectRaven for better performance (really loved his work)
What's not working:
You tell me.
Note: For people wanting to know differences between this CM build and the other one by dh.harald, please go to the second post.
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Xiaomi Mi 4i
Contributors
omerjerk, dh.harald
Source Code: http://github.com/omerjerk
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2015-09-28
Last Updated 2016-01-03
[This post stands deprecated as of the latest release. ]
First of all I'd like to thanks dh.harald, smoki3, k2wl and everyone else who helped in building up the device tree.
In other ROMs, the biggest problem is of random reboots/shutdowns and that Clash of Clans is not working. Initially, I spent for over a week to fix those bugs but really couldn't find what actually causes the above two issues.
The problem lies in the kernel because flashing intersectRaven kernel or the stock kernel for that matter fixes the above two issues.
Unfortunately, I couldn't track down the commit in the mi4i-dev/dh.harald kernel source which causes these problems.
So, I started with the stock kernel, booted it with CM, made WiFi drivers working and applied the patches from intersectRaven's kernel source.
Now everything is working with no random shutdowns and with CoC working.
I'll keep maintaining this ROM now.
Also, I'm not planning to bump the kernel version because I have feeling that some change while bumping the kernel version only is what caused the problem in the first place. Neither does bumping the kernel version gives any performance boosts.
However, I'll keep making important changes in the kernel as required.
Installation Instructions:
1. Root your phone.
2. Copy the ROM zip to your phone (the link of the ROM zip in the first post).
3. Flash TWRP using Mi4i toolkit. (Advance users can flash the image manually from this link).
4. Reboot the phone to recovery mode.
5. Wipe data/factory reset.
6. Flash ROM zip file.
7. Flash GApps (can be downloaded from here)
8. Reboot to System.
9. Enjoy!
going to try this once i figure out why my CM12.1 goes to black screen at startup
camera performance?
Thanks for taking out time to build this, I am looking for a pure stock experience in Mi4i and your build seems to be very close.
Can you please post some camera shots taken indoor and outdoor?
For installation, just factory reset from twrp or full wipe (include wipe system)???.
btw you should write how to install.
Is it as smooth as Wilson3q's build. The reason why I'm comparing is that out of all the custom ROMs out there, I find his ROM the smoothest.
Sent from my Mi 4i using Tapatalk
I get the recent apps swiping lag. I made the mistake of flashing the stock gapps so now im re-flashing and flashing the kernal. But so far it seems good other then a little issue i had with APNs and data.
The setup screen is actually very laggy and i don't have a keyboard to type in my wifi password.
haahaaah said:
For installation, just factory reset from twrp or full wipe (include wipe system)???.
Click to expand...
Click to collapse
m4gg0t said:
btw you should write how to install.
Click to expand...
Click to collapse
Added the instructions in the 3rd post.
iamnjohnson said:
Is it as smooth as Wilson3q's build. The reason why I'm comparing is that out of all the custom ROMs out there, I find his ROM the smoothest.
Sent from my Mi 4i using Tapatalk
Click to expand...
Click to collapse
I haven't used his build. I can't say how does it stand in comparison to his build.
In this release, I aimed more at getting the bugs fixed (random shutdowns and CoC not working) which were becoming too annoying.
I'll now be focusing more on making it even smoother.
I'd suggest you to try and see for yourself how it stands.
I flashing dh.harald's build now as i couldn't go past the setup screen cause play services kept crashing after i re-flashed the rom and gapps.
I'm reinstalling your build currently.
m4gg0t said:
I flashing dh.harald's build now as i couldn't go past the setup screen cause play services kept crashing after i re-flashed the rom and gapps.
I'm reinstalling your build currently.
Click to expand...
Click to collapse
I remember I was also getting that crash. I guess I've fixed that in my build.
Feel free to post bugs.
omerjerk said:
I haven't used his build. I can't say how does it stand in comparison to his build.
In this release, I aimed more at getting the bugs fixed (random shutdowns and CoC not working) which were becoming too annoying.
I'll now be focusing more on making it even smoother.
I'd suggest you to try and see for yourself how it stands.
Click to expand...
Click to collapse
I'll flash and let you know [emoji4]
how can I re-flash gapps? I want to replace most of the AOSP apps with Google apps.
m4gg0t said:
how can I re-flash gapps? I want to replace most of the AOSP apps with Google apps.
Click to expand...
Click to collapse
Twrp > factory reset > flash rom > flash gapps > rebot. Done!!.
Use open gapps, choose ARM64 5.1 STOCK.
Messaging replaced by messenger
Cm camera replaced by Google camera
Email replaced by gmail
Gallery replaced by photo
[your device will like nexus device with STOCK gapps]
Look screenshoot..
I think that the kernel of the Raven more smoothly.
PavelPerm said:
I think that the kernel of the Raven more smoothly.
Click to expand...
Click to collapse
+1
haahaaah said:
Twrp > factory reset > flash rom > flash gapps > rebot. Done!!.
Use open gapps, choose ARM64 5.1 STOCK.
Messaging replaced by messenger
Cm camera replaced by Google camera
Email replaced by gmail
Gallery replaced by photo
[your device will like nexus device with STOCK gapps]
Look screenshoot..
Click to expand...
Click to collapse
Thx a lot! Though the stock has a lot of the Google apps that I don't want to have installed, like Google docs, earth, fitness, sheets, slide, android pay.
PavelPerm said:
I think that the kernel of the Raven more smoothly.
Click to expand...
Click to collapse
I don't understand, this ROM already has Raven's tweaks
/!\Thread will be moved in Android dev section by moderator..../!\
Hi!
I share you my own build based on Ivan andI9300's works with my works.
This ROM will NOT work if:
[fix in next build] - you have partitonned your system (less of 1GB of free espace)
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's news in this ROM:
-Full CM-13
-RIL code's based on I9300 Github
-Apps dex-preoptimization (speed up first boot)
-Brightness setup updated
-Swap activated (kernel)
-IO SHEDULERs added (kernel)
-DOZE Activated and working - (see screenshots)
-No bugs with auto rot.
-No bugs with camera
-No bug with BT (thanks P.A.N. from i9305 github)
I let you try it and report. This build will be updated every weeks.
How install it:
-Just install it over another CM13 Roms without wipe.
-You came from CM-12.1, you need to wipe all datas (system-data-cache-dalvik).
If you wipe all datas, after install GApp you may will have an error with AOSP Keyboard (crash):
How install GApps:
-Install the Rom, and directly after, install Aroma GApp
-Select all that you want WITH Google Keyboard. After have selected your apps, choose to delete KeyboardStock!!.
-Don't install Google Camera, it dooesn't worked!
-Install GApps, wipe cache and reboot
Or you can install the apk that i share, and deactivate Old Google keyboard
Then please DL Android keyboard apk, and save your current ROM before updated!
How DOZE works:
-download from xda doze setting editor or naptime from PlayStore
-Edit times to force Doze to be activated more fast (see my screenshots, i use this timers)
To try Doze you must let your phone, it will not work of you have your phone in a pocket on a car/train etc etc. If a sensors detect a movement, the phone becomes ACTIVE.
You can log Doze states by commands from adb:
Code:
Dumpsys battery unplug
Dumpsys deviceidle force
Dumpsys deviceidle step
Build Download:
https://mega.nz/#!7xVnnSAZ!fUhHr2HFHTLpHVdv08lsul9KQArBFp2s9lqjwp6twWk
New build - 14-02-2016:
https://mega.nz/#!jwMw1KzK!1DhjFdaLkbbCIExSkKpwbKQPUa4_bHkCtuhP3wuzqDs
Sources:
https://github.com/bizcuite/
Thanks to:
-Ivan Meler
-Cyanogen
-All users who helps me
Bizcuite
reserved for future
Thank you very much for supporting the machine we suffer with the device a little support
So this is like a mod? What CM13 ROMs were tested?
andrewKode said:
So this is like a mod? What CM13 ROMs were tested?
Click to expand...
Click to collapse
No, just a different way to code. I haven't say nothing about mod/others.
I know that many users had pb with Ivan's build (auto rot./data etc...). If i can offer another way, it's a good thing.
For information, i had NEVER installed Ivan's build, only mine, i don't know if you will have sames pb.
My Rom works since 1 mounth on my phone.
Bizcuite
Sent from my GT-N7100 using XDA Free mobile app
bizcuite said:
No, just a different way to code. I haven't say nothing about mod/others.
I know that many users had pb with Ivan's build (auto rot./data etc...). If i can offer another way, it's a good thing.
For information, i had NEVER installed Ivan's build, only mine, i don't know if you will have sames pb.
My Rom works since 1 mounth on my phone.
Bizcuite
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
M8 can you work on an stock aosp rom instead of cm please. Just a request. BTW gr8 rom testing now.
Hello! i try to put this rom in my device, but it remains in bootloop at starts :S then i try with/without agni kernel 4.50 and opengapps 6.0 pico but don' t work :S. (i came from cm12.1, and i wipe all data).
In any case, very thanks for your work. (Sorry for my bad english)
Lynexius said:
Hello! i try to put this rom in my device, but it remains in bootloop at starts :S then i try with/without agni kernel 4.50 and opengapps 6.0 pico but don' t work :S. (i came from cm12.1, and i wipe all data).
In any case, very thanks for your work. (Sorry for my bad english)
Click to expand...
Click to collapse
did you wipe internal storage as well? put youe rom files on an extenal sd , wipe everything and try again. Install gaaps after flashing rom.
simplyme2908 said:
M8 can you work on an stock aosp rom instead of cm please. Just a request. BTW gr8 rom testing now.
Click to expand...
Click to collapse
I can, i can
I need more space on my hard drive!!
Lynexius said:
Hello! i try to put this rom in my device, but it remains in bootloop at starts :S then i try with/without agni kernel 4.50 and opengapps 6.0 pico but don' t work :S. (i came from cm12.1, and i wipe all data).
In any case, very thanks for your work. (Sorry for my bad english)
Click to expand...
Click to collapse
Don't install Agni kernel, if the dev. doesn't have activated Swap, you may have a bootloop (fstab file error, partitions not mount).
simplyme2908 said:
did you wipe internal storage as well? put youe rom files on an extenal sd , wipe everything and try again. Install gaaps after flashing rom.
Click to expand...
Click to collapse
I have updated the "how to" to install GApp, don't reboot immediatly, install Aroma GApps (custom install) with KeyboardGoogle and force remove AOSP Keyboard.
I have tried twice the method.
Bizcuite
bizcuite said:
I can, i can
I need more space on my hard drive!!
Don't install Agni kernel, if the dev. doesn't have activated Swap, you may have a bootloop (fstab file error, partitions not mount).
I have updated the "how to" to install GApp, don't reboot immediatly, install Aroma GApps (custom install) with KeyboardGoogle and force remove AOSP Keyboard.
I have tried twice the method.
Bizcuite
Click to expand...
Click to collapse
Use cloud storage, I really want a stock aosp rom wish I could do something.
first of all, Thanks for this rom, @bizcuite !
so far so good aside from 1 weird issue with external sd card. ín storage settings it is displayed as "portable-storage" and card was renaed to "mac_create_". while using titanium backup to restore my apps i had to guess the folder name related to the external storage. after i found this and choose my backup folder i get the message "folder not writable", although i can still use the folder to acess my apps and restore them.
i'm concernd about this. how do we fiz this?
thanks a lot!
J4mps said:
first of all, Thanks for this rom, @bizcuite !
so far so good aside from 1 weird issue with external sd card. ín storage settings it is displayed as "portable-storage" and card was renaed to "mac_create_". while using titanium backup to restore my apps i had to guess the folder name related to the external storage. after i found this and choose my backup folder i get the message "folder not writable", although i can still use the folder to acess my apps and restore them.
i'm concernd about this. how do we fiz this?
thanks a lot!
Click to expand...
Click to collapse
Move your backup to internal storage and then restore. I didn't let titanium mess.with my sd card. Because many where reporting, loss of data and ****.
Hello! i follow your guide, but i have the same result :S Now i will do a list what i do when install the rom:
I use TWRP 3.0.0-0
1) Wipe all partitions (dalvik/art - cache - system - internal memory)
2) I install the rom zip.
3) I install Aroma Gapps directly and in custom setting i also install google keyboard and removing old aosp keyboard)
4) Finally i reboot, but only time system go in bootloop animation (i try it for 10 minutes)
i don' t use agni kernel
My rom base firmware is XXUFND3
Thanks for help me all
Wow, this ROM rocks, very stable, definitely a daily driver for me. Ok, this is what I did for install:
1) Use TWRP 3.0 to wipe the phone completely (internal storage included)... TWICE
2) Install the ROM via TWRP.
3) Install OpenGAPPS via AROMA installer, added the google keyboard inside the installation. - Make sure you select 'forceclean'
4) Boot, AOSP keyboard error, went into settings, and selected the google keyboard as default.
5) Flashed SuperSU zip file via TWRP
6) Installed BusyBox via Google Play
7) Flashed Xposed by romracer
8) Installed Xposed istaller
9) Installed 3C toolbox Pro from Google Pay
10) Proceed to delete the AOSP keybord and other useless items from system using 3C Toolbox Pro.
11) Installed SPenCommand.
12) Base system is now ready for loading everything else from the Play Store.
Only issue I have so far is that I cannot move programs into the system partition using either Titanium or 3C Toolbox. Other than that everything works fine.
One more thing, Google Camera works fine for me.
Lynexius said:
Hello! i follow your guide, but i have the same result :S Now i will do a list what i do when install the rom:
I use TWRP 3.0.0-0
1) Wipe all partitions (dalvik/art - cache - system - internal memory)
2) I install the rom zip.
3) I install Aroma Gapps directly and in custom setting i also install google keyboard and removing old aosp keyboard)
4) Finally i reboot, but only time system go in bootloop animation (i try it for 10 minutes)
i don' t use agni kernel
My rom base firmware is XXUFND3
Thanks for help me all
Click to expand...
Click to collapse
Hi,
Thanks to try the Rom and reports!
Have you tried to install gapps with the minimum? Just Android keyboard and force to uninstall stock keyboard?
Don't format external storage. It's not necessary.
FYI: i have begun to work on aosp...
Bizcuite
Hello everybody
Bizcuite yes i install minimum gapps + keyboard, play games and youtube. And yes i tick force uninstall.
No problem, i wait a future update of this rom :good:
Regards
Lynexius said:
Hello everybody
Bizcuite yes i install minimum gapps + keyboard, play games and youtube. And yes i tick force uninstall.
No problem, i wait a future update of this rom :good:
Regards
Click to expand...
Click to collapse
Have you try to install only the Rom without gapp, to see if it boots correctly and after install gapps?
Bizcuite
Yes bizcuite i test it also without gapps, I don't know why it dosn't work just me xD
let's see if someone else has the same problem.
Install philz recovery mount all partitions and then wipe preload manually or just tap clean to install new rom. Then flash the rom.
No many reports or complaints from users.
Is it a good news? No download of the ROM or no bugs?
Bizcuite
Props to @BeansTown106 for source, @GtrCraft for PureHammerhead, and KrexusROM @KreAch3R @Jax Teller for the device, kernel, vendor, and hardware trees, and @dragos281993 for PureMako
READ EVERYTHING HERE BEFORE FLASHING:
-Updating to TWRP 3.1.1-0 is recommended
-Use BeansGapps Mini https://www.androidfilehost.com/?w=files&flid=171927
-Not prerooted. SuperSU stable or Magisk stable recommended
-No camera included. Google Camera 2.5.052 recommended http://www.apkmirror.com/apk/google-inc/camera/camera-2-5-052-release/
-As of the 4/23 release the ro.opa.eligible_device=true is no longer in the system/build.prop. This will cause the Google App to use Google Now interface instead of Google Assistant. If you want to use Google Assistant use the Get Assistant - Root app on the PlayStore (choose NEW method when prompted) OR if you use Magisk theres a Google Assistant Enabler module for this.
-Want a Pixel Launcher that allows swipe up to App Drawer in landscape? Sideload the Android O Pixel Launcher from apkmirror.com http://www.apkmirror.com/apk/google...ixel-launcher-o-3952143-android-apk-download/
-Netflix casts fine but throws an Error on playback. Sideload Netflix 4.8.5 from apkmirror.com OR use the zipaligned Netflix4.8.5-signed.apk in the ROM Download folder https://www.androidfilehost.com/?fid=529152257862715472 . The zipaligned apk will never show up as needing an update on PlayStore.
-Features? Updates? Read the changelog below.
ROM Downloads: https://www.androidfilehost.com/?w=files&flid=164137
PureNexus Changelog: https://docs.google.com/document/d/1ROCTINpYR2M2QZ-uzErZSNK8gjIm_bXS6sXL83YePd0/pub
Source Code: https://github.com/PureNexusProject
Device and Kernel Source:https://github.com/krexus-partners
FLO BUILD SPECIFIC INFO:
-03/22/2017 build includes all the Pixel Gapps that the OFFICIAL Pure Nexus 3/17 builds include, EXCEPT Google Camera, Hangouts, Chrome, and Photos.
-03/20/2017 build includes all the Pixel Gapps that the OFFICIAL Pure Nexus 3/17 builds include, EXCEPT Google Camera.
KNOWN ISSUE:.
-Netflix casts fine but may throw a 0013 Error on playback. Sideload Netflix 4.8.5 from apkmirror.com OR use the zipaligned Netflix4.8.5-signed.apk in the ROM Download folder in OP. The zipaligned apk will never show up as needing an update on PlayStore.
Very good of you to take this on for good old flo Bill. Thanks man!
Mike T
Please some love for Deb too :crying:
@buffal0b1ll
Hello)
Are there any plans for updating this Rom?
Very good， just looking for one。
I'm just afraid this one won't be got closed like other thread lol. Anyway thanks for letting my fav rom fly again. :good:
After flash this Pure
Have to say, this ROM is dope
Thanks for this work
Hope this ROM dont die
boom1982 said:
@buffal0b1ll
Hello)
Are there any plans for updating this Rom?
Click to expand...
Click to collapse
ranaxda200 said:
I'm just afraid this one won't be got closed like other thread lol. Anyway thanks for letting my fav rom fly again. :good:
Click to expand...
Click to collapse
manfio said:
After flash this Pure
Have to say, this ROM is dope
Thanks for this work
Hope this ROM dont die
Click to expand...
Click to collapse
A thread full of optimists I see As long as the trees work and the kernels boot, I'm not planning on going anywhere.
Purenexus+glitch r544+supersu 2.79 sr3+google camera 2.7.008+substratum themes: all works perfectly, also night light!!! Thank you very much buffal0b1ll
Hi is it compatible with f2fs format?
Hmm, looks interesting... lets give this one a go, shall we?
lollyjay said:
Hi is it compatible with f2fs format?
Click to expand...
Click to collapse
Kernels support f2fs, firstly, not ROMs. The stock AOSP kernel with this ROM doesn't support f2fs. But if you find a custom kernel that supports f2fs you can use it and format your data and cache partitions to f2fs on any ROM. Secondly, f2fs is only faster on writes, so only data and cache partitions benefit from that file system. ROM support for f2fs (as had been popular a couple years ago) would only be to allow system partition to also support f2fs, which this ROM doesn't have. That type of support is pretty much a thing of the past because it's a pain in the ass to do since ROM zips started using block storage convention and there's no speed advantage to having system be f2fs anyway. Make sense?
I don't wanna hear about all the common f2fs issues that have nothing to do with the ROM if you do try it. These include:. Couldn't flash ROM/GAPPS because it says system partition too small, couldn't make or restore a nandroid, lost all my data because I didn't offload it first, lost all my data when my data partition got corrupted, wrong internal storage size reported, can't take photo/screenshot write to internal storage.
If you're smarter than the average problem solver and have a PC, an OTG, and enjoy offloading and moving stuff back, then the modest (if not just placebo) speed gain of going f2fs may be worth the risk of wasted time and lost data. If you're the user that uses a toolkit instead of a terminal, then I'd let that sleeping dog lie.
Your point(s) well taken. Personally I have found little to gain from f2fs., except for my old TF300T
This rom is superb!!! It contains just about everything I had ever dreamt of seeing on the lovely, old Nexus 7, from Nougat in full flow to Google assistant and Night Light. I can even watch some previously impossible TV by
using the 'hide' function in the new version 11.6 of Magisk along with Magisk Manager from the Playstore. Many thanks to the Dev for giving my Nexus 7 a new lease of life. This is super work.
this rom is great
but one problem i think.
if its possible, in next build remove some apk from system, like chrome, calendar, calculator, gboard, google fotos
please
its to free some system space
manfio said:
this rom is great
but one problem i think.
if its possible, in next build remove some apk from system, like chrome, calendar, calculator, gboard, google fotos
please
its to free some system space
Click to expand...
Click to collapse
The ROM is in sync with @BeansTown106 source with the exception of my removing Google Camera 4.x from the Gapps because it's incompatible with Flo. Removing gboard would leave you with no keyboard, see the changelog in the OP.
Are you bumping up against a full system when attempting to flash more mods?
You're welcome to remove whatever system apps you want (before or after booting) if you need more system partition space. That said, the only apps I'd consider removing from built in Gapps, if they are still in source on the next go around, would be Hangouts, Chrome, and Photos.
@buffal0b1ll
Maybe there is a meaning remove gapps from rom...
That there were no questions on this topic)
Great rom love it so quickly
Great Rom just installed on my N7 (2013) .
Sent from my LG-H850 using Tapatalk
Ethereal-OS v1.1-Beta
Android 5.1.1 Lollipop
with Viper4Arise v2.5.0.5 Audio Enhancement
& Google Assistant
DISCLAIMER:
Your warranty is now void by proceeding. Flashing your device's partitions or modifying its stock configuration poses an inherent risk of permanently damaging your device. By proceeding further, you are absolving me of any liability in the event your device is damaged or rendered inoperable. You -- and you alone -- are solely responsible for your device. Follow the instructions carefully and things should go smoothly.
ETHEREAL-OS v1.1
As its name implies -- Ethereal -- this stock-based Lollipop ROM is very light weight & refined. It combines a pure stock experience with several features and enhancements beyond those of which are included by the manufacturer & service provider. Furthermore, this ROM has been debloated, and freed of those pesky /system apps for which many of us have no need or wish. However, should you have the need for those apps, I will eventually be providing a download link for the /system APKs that I removed.
REQUIREMENTS:
In order to flash this ROM to your device, TWRP custom recovery must be installed. While it is possible to flash this ROM using an on-device flashing utility, such as Flashfire, these instructions will be geared towards custom recovery. If you do not have TWRP already installed on your Alcatel Ideal, simply search the XDA threads for the files and instructions to do so.
SPECIFICATIONS:
Android Version: 5.1.1 Lollipop
Build No. Ethereal-OS v1.1
Kernel Version: 3.10.49-g3d12fcb
Android Security Patch Level: June 1, 2017
Baseband Version: MSM8909.LA.1.1.c7.1-113370119
Build Date: August 15, 2017 15:22.26 EST
FEATURES:
Moderately debloated;
Pre-rooted with SuperSU v2.82-SR3;
BusyBox 1.27.2;
Google Pixel (Dark Mod) boot & shutdown animation;
Zipaligned;
Essential GApps;
June 1, 2017 Android Security Patches;
Insecure boot support;
Init.d support;
GApps Installed:
Google Pixel Camera
Google Chrome
Google Clock
Google Calendar
Google Contacts
Google Drive
Android System WebView
Google Search & Google Voice Search
Google Assistant Launcher
Google Messenger
Gboard - Google Keyboard
MEDIA:
Dolby Digital Plus v1.0
Viper4Arise v2.5.0.5 with FET Compression, FIREqualizer & Convolver
NEON Audio Drivers v2.5.0.4
Sony Music App v9.3.10.A.0.7
Sony TrackID Music v4.6.8.0.20
VLC Media Player v2.1.15
UI & UTILITY APPLICATIONS:
MIXplorer File Manager v6.18.6
SuperSU Root Manager v2.82
Kernel Adiutor-Mod v1.0 (02-28-2017)
BusyBox v57
Nova Launcher v5.3
Pixel Dark Icon Pack v1.8
Pixel Icon Pack v1.1.3
Quick Reboot Pro
Fast Cleaner v3.2.8
Google Wallpapers
INSTRUCTIONS
1. Download the ROM and save it to internal storage or, preferably,
an external micro-SD card;
2. Boot your device into TWRP recovery;
3. Perform a full wipe (/data, dalvik, /system & /cache). NOTE: If you saved the ROM zip on internal storage, DO NOT wipe internal storage. If you saved the ROM zip to external storage, format your /data partition;
4. Select INSTALL from TWRP's main menu, navigate to the storage location of the ROM zip,
select the file, and swipe to commence with installation. The process will take around two minutes;
5. When installation completes, to prevent possible boot looping, wipe cache & dalvik cache. Reboot system. NOTE: first boot may take several minutes. Do not interrupt the process and be patient. Subsequent boot ups will occur much faster.
6. After completing initial setup and signing in with your Google account, it is very important to go ahead and update Google Play Services and all GApps which require updates through the Play Store. This step is important to ensure proper functionality of the Google Assistant Launcher.
KERNEL SOURCE CODE:
https://github.com/zombah/android_kernel_alcatel_msm8909
BUGS:
When reporting a bug, if you are not submitting a bug report, please provide, with as much specificity as possible, the exact nature of the bug. Screenshots can be helpful as well.
NOTE:
I am in the process of adding more features to this ROM, such as the CyanogenMod 12.1 Theme Engine interface or Substratum OMS management. I was not able to implement theming just yet, due to my wishes to get this beta release posted as early as possible.
THANKS & MENTIONS:
I'd like to thank @Chainfire for his ceaseless development of SuperSU. Thanks to TeslaCoil Software for Nova Launcher. Thanks to Hootan Parsa for the best file management app on the planet: MIXplorer. Thanks to @Stericson for BusyBox. Thanks to Viper Acoustic for Viper4Arise for Android, and thanks to Dolby Technologies for Dolby Digital Plus.
I would also like to mention and say thanks to @scohut for his assistance and advice on this project.
DOWNLOAD LINK:
Ethereal-OS v1.1-beta: https://drive.google.com/file/d/0B1Sfod4HWfk2dDJYc1hreldSTTg/view?usp=drivesdk
There's a boot loop in the ROM. I just fixed it. Uploading the patched file now.
UPDATE: boot loop fixed. Replaced download link with fixed ROM...
So far....so good
Without a hitch:good:
edit: camera works wonderful but camcorder seems to error after use "can't connect to camera"
I'm having the same problem too (Screenshot) but everything else seems to be working fine! Like it a lot
Enviado desde mi Alcatel_4060A mediante Tapatalk
ESzn said:
I'm having the same problem too (Screenshot) but everything else seems to be working fine! Like it a lot
Enviado desde mi Alcatel_4060A mediante Tapatalk
Click to expand...
Click to collapse
Hmmmm. So the video recording seems to have a bug. I'll work on it this evening. Did you guys have any trouble with the regular camera at all?
MotoJunkie01 said:
Hmmmm. So the video recording seems to have a bug. I'll work on it this evening. Did you guys have any trouble with the regular camera at all?
Click to expand...
Click to collapse
Do you mean in the stock ROM? I never had any problems with the camera in that ROM. I also tested Open Camera and had the same problem
ESzn said:
Do you mean in the stock ROM? I never had any problems with the camera in that ROM. I also tested Open Camera and had the same problem
Click to expand...
Click to collapse
No I mean in this custom ROM. Does the Pixel Camera take and store photos OK? Is it just the video camera giving camera error?
MotoJunkie01 said:
No I mean in this custom ROM. Does the Pixel Camera take and store photos OK? Is it just the video camera giving camera error?
Click to expand...
Click to collapse
Oh yeah sorry, the camera works perfectly, It's just the video camera
ESzn said:
Oh yeah sorry, the camera works perfectly, It's just the video camera
Click to expand...
Click to collapse
OK. I may know where the problem is. I'll check the camera drivers this evening and try to iron it out. If so, I'll post a patch you can flash from TWRP to fix it.
MotoJunkie01 said:
OK. I may know where the problem is. I'll check the camera drivers this evening and try to iron it out. If so, I'll post a patch you can flash from TWRP to fix it.
Click to expand...
Click to collapse
Nice man thank you
Just curious is there a way on your custom rom to make the sd card part of the overall storage on my device?
furmaneth said:
Just curious is there a way on your custom rom to make the sd card part of the overall storage on my device?
Click to expand...
Click to collapse
Perhaps. I'll check on the possibility of adaptive storage. Yeah you can set it yourself by using a terminal emulator and entering the following:
adb shell sm set-force-adoptable true
I just wanted to let everyone know that the old Rro layers manager works with this OS... Some layers work, some don't... You just have to fool around with it to find one you like that works properly. Here's some of my settings screens with Jeremy Beck's Acid layers installed. For some reason I can't get the main settings screen's background to go dark to match. Same thing on the stock rom though... Does anyone know how to mod the settings app to change the background to black?
MotoJunkie01 said:
Perhaps. I'll check on the possibility of adaptive storage. Yeah you can set it yourself by using a terminal emulator and entering the following:
adb shell sm set-force-adoptable true
Click to expand...
Click to collapse
I just tried that command and it just says device not found.
furmaneth said:
I just tried that command and it just says device not found.
Click to expand...
Click to collapse
Did you type "su" first to grant root access? Also, be sure ADB Debugging is enabled in Developer Options.
MotoJunkie01 said:
Did you type "su" first to grant root access? Also, be sure ADB Debugging is enabled in Developer Options.
Click to expand...
Click to collapse
I did type su to get root access but it did the same thing but I can't find adb debugging unless USB debugging is the same.
USB Debugging is the same as ADB Debugging on this device. You are correct there. I'll see if I can get adoptive storage enabled on mine. If so I'll make a flashable mod.
MotoJunkie01 said:
USB Debugging is the same as ADB Debugging on this device. You are correct there. I'll see if I can get adoptive storage enabled on mine. If so I'll make a flashable mod.
Click to expand...
Click to collapse
Thanks and I am also have this message pop up when I change the song in Spotify.
furmaneth said:
Thanks and I am also have this message pop up when I change the song in Spotify.
Click to expand...
Click to collapse
OK. The audio settings force close I can fix. That's a conflict between Spotify and Viper4Arise. I'll get a patch for it.
Hi folks,
LOS with MicroG has finally been released.
For people who don't know what the heck is this, it's besically LineageOS unofficial fork with built-in microG gapps implementation. That's right! It's the same LOS without Google spyware.
Some cool features of LOS with MicroG
1. Full Play Services compatibility:
This ROM has built-in microG free-as-in-freedom re-implementation of Google's proprietary Android user space apps and libraries.
This enables you to use every Google service you need without keeping another closed-source binary blob in your Android system.
2. Native F-Droid support:
LineageOS for microG comes with F-Droid already installed. You can use it to access plenty of FOSS applications
3. OTA updates like official LOS:
The ROM has OTA updates from upstream LineageOS weekly. In this way you always receive new features and security updates just few days after they are released mainline.
Installation instructions
This ROM and official LineageOS use different signing keys, so you can't flash this ROM on top of the official LineageOS. Clean installation is strongly suggested.
1. Download the ROM zip and vendor+firmware zip
2. Boot into TWRP
3. Wipe System, Data, Cache and Dalvik
4. Flash the Vendor+Firmware zip and the ROM zip
5. Flash Magisk (optional)
6. Reboot
Post-installation
First, open the "microG Settings" app and check if everything is OK in the "Self-Check" section; you will probably have to give microG some permissions, like location and file access.
1. UnifiedNlp
UnifiedNlp is the microG Network Location Provider, which provides the current location of the device without the use of the GPS. While Google's NLP can only use Google's servers for positioning, UnifiedNlp obtains the geolocation through different plugins, which interface to different services.
By default there are two plugins installed:
MozillaNlpBackend, which uses the Mozilla Location Service (online)
NominatimNlpBackend, which uses MapQuest's Nominatim service (based on OpenStreetMap) for geocoding (online)
If you want to use these plugins, go to microG Settings -> UnifiedNlp Settings, configure and enable both.
If you instead want different plugins (like the LocalGsmNlpBackend, which uses a local offline database of the GSM towers to obtain the location) you can download them in F-Droid and enable them in the same way.
Reboot and check whether UnifiedNlp is correctly set up in the "Self-Check" section of the "microG Settings" app.
2. F-Droid
You have the F-Droid Privileged Extension installed by default, why not use it? To make a good use of it go to the F-Droid Settings and enable auto updates.
3. Google Cloud Messaging
Many apps rely on the Google Cloud Messaging, a Google proprietary system to push notifications to your device. This feature is implemented in microG but, as not every user requires it, is disabled by default. If you need it, enable the "Google Device registration" and the "Google Cloud Messaging" features in the "microG Settings" app.
4. Weather service
If you want the weather features of LineageOS (like in the lock screen or in the cLock widget) you have to download a weather provider from here. Choose your favorite one, install it and configure it in cLock (or in Settings → Apps → Gear icon → Weather).
Downloads
ROM Link: https://download.lineage.microg.org/beryllium/
Vendor+Firmware: https://mirror.akhilnarang.me/MIUI/beryllium/
Twrp build: https://forum.xda-developers.com/poc...ption-t3853004
Magisk: https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
Find more about the project here https://lineage.microg.org/
Credits
MicroG Team
Lineage OS team
@akhilnarang for Vendor+Firmware
@vasishath for TWRP
@topjohnwu for Magisk
Disclaimer:
I'm not the developer of the ROM, neither I'm associated with the team who is behind this amazing piece of work. I am just sharing the work for everyone on XDA.
Shout out to Team MicroG for their wonderful work!!!
Sweet! Good to see official LOS microg.
Thanks for sharing brother.
how is the battery and performance someone who tried it ? and is it safe to wipe system ?
niteone said:
how is the battery and performance someone who tried it ? and is it safe to wipe system ?
Click to expand...
Click to collapse
Battery life is amazing since the notorious Google Play Services is not present on this ROM. Performance is more or less the same. The main reason people use MicroG over other GApps is because of privacy and battery.
And talking about your last question, I guess you wipe System partition everytime you do a clean flash. So yeah, it's completely safe to wipe System partition.
Rowdyy Ronnie said:
Battery life is amazing since the notorious Google Play Services is not present on this ROM. Performance is more or less the same. The main reason people use MicroG over other GApps is because of privacy and battery.
And talking about your last question, I guess you wipe System partition everytime you do a clean flash. At least that's what a vl an flash mean (wiping System, Data, Cache & Dalvik). So yeah, it's completely safe to wipe System partition.
Click to expand...
Click to collapse
Yes i tried it but cant sync my contacts because they are stored in google and other things but from my little expirience its great.i moved to the normal lineage now
niteone said:
Yes i tried it but cant sync my contacts because they are stored in google and other things but from my little expirience its great.i moved to the normal lineage now
Click to expand...
Click to collapse
You can easily get contacts.vcf file from google and just import it in your normal contacts app. Takes a minute only.
---------- Post added at 06:59 PM ---------- Previous post was at 06:57 PM ----------
OP, I will suggest to add 'Flashing DFE' also in the first post instructions, for people who don't want to get encrypted.
Interesting project, good job!
Thread cleaned!
Personal attacks will NOT be tolerated on this private development site!
Found work can be posted in NEWS sections with proper credits
If the original developer does not wish it posted they can request it be taken down
No one else has that right!
Thank you all for your cooperation
Friendly Neighborhood Moderator
Works as expected. No issues. Running it on tissot, bacon and now testing on poco! Thanks for reminding!
Sent from my Poco F1 using XDA-Developers Legacy app
Great Image verry fast Thanks MR
the ROM is awesome, but I can not get contacts and Gmail to work. The rest of apps, perfect!.
piernodoyuna said:
the ROM is awesome, but I can not get contacts and Gmail to work. The rest of apps, perfect!.
Click to expand...
Click to collapse
Because it is microg ROM. Gmail will not work.
surely, the answer could have been more elaborate. and yes, Gmail can work with microg, but in my case, I have not succeeded.
piernodoyuna said:
surely, the answer could have been more elaborate. and yes, Gmail can work with microg, but in my case, I have not succeeded.
Click to expand...
Click to collapse
Personally I don't use gmail (using K9), but maybe you will find an answer here:
https://github.com/microg/android_packages_apps_GmsCore/labels/👥 Accounts
Sent from my Poco F1 using XDA-Developers Legacy app
ydd0ras said:
Personally I don't use gmail (using K9), but maybe you will find an answer here:
https://github.com/microg/android_packages_apps_GmsCore/labels/👥 Accounts
Click to expand...
Click to collapse
Thank you very much for the reply! I think my problem is not in the mail client, but in the authentication of credentials that access my contacts, calendar events and emails. I think that this issue is not yet solved
Does 0805 build have included vendor? I can see only 5.62MB vendor.new.dat.br which is usually 280MB on official one.
For some reason i won't get the UnifiedNLP working on my Poco F1.
I did a clean install, coming from the latest MIUI global ROM and followed the post install guide on https://lineage.microg.org/. The only additional Tool i installed was the latest Version of Magisk.
**EDIT**
I reinstalled microg LineageOS without Magisk, but it still does not work.
Any suggestions?
Most probably you've hit version with support for something called Qualcomm Location. It was fixed in build on 27th November because thingy was not working well (also because it is closed source soft).
AFAIK there are two ways to fix it:
- install LOS >=2711.
- patch framework-res.apk to force use UnifirdNlp. There should be some info about procedure in a LOS thread though I'm not 100% sure.
crow6 said:
Most probably you've hit version with support for something called Qualcomm Location. It was fixed in build on 27th November because thingy was not working well (also because it is closed source soft).
AFAIK there are two ways to fix it:
- install LOS >=2711.
- patch framework-res.apk to force use UnifirdNlp. There should be some info about procedure in a LOS thread though I'm not 100% sure.
Click to expand...
Click to collapse
I will try that. Thank You!
Are ports of Lineage 17 planned? The Websites last nightly is from 2020-09-30 (los 16)