Database Info

Never use your power button again. Flip case/pocket autolock.

In the market the APP called AUTOLOCK allows :
- Automatic screen off by proximity sensor : when I put my note in my pocket the screen goes off automatically.
- When the note is in landscape there's an option to disable the proximity sensor
With a flip case :
- The proximity sensor (like on the ipad2 smart cover) disables the screen when you close it.
- Wakes up the screen when you open it... but obviously this option will prevent the phone from entering deep sleep and drain battery life this is not confirmed yet, since I havn't monitored my battery life with this app yet.
- For cases with magnets theres an additional option to use the magnetic sensor instead of the proximity sensor
Add some cool factor to your phones ! The app is free (for the moment...)
If autolock doesnt work with your flip case you can try "Proximity Screen Off" which is a similar app but sadly it has no wake up option.
Or just increase the reading interval to 3 seconds.
To uninstall you must remove admin rights to the sensor first. In settings -> localisation --> admin rights.
Proximity sensor is just an IR LED, it doesnt drain much battery... Remember the oncall battery life with screen off sensor on of the note is like 9 hours non stop.

epicfailguy2 said:
In the market the APP called AUTOLOCK allows :
- Automatic screen off by proximity sensor : when I put my note in my pocket the screen goes off automatically.
- When the note is in landscape there's an option to disable the proximity sensor
With a flip case :
- The proximity sensor (like on the ipad2 smart cover) disables the screen when you close it.
- Wakes up the screen when you open it...
- For cases with magnets theres an additional option to use the magnetic sensor instead of the proximity sensor
Add some cool factor to your phones ! The app is free (for the moment...)
Click to expand...
Click to collapse
so the proximity sensor will be on 24/7?

I can't seem to get this to work with the flip case
Sent from my GT-N7000 using xda premium

Managed to get it to lock ok by disabling the wake up setting, because when the flip case cover is all the way down it seems to wake the phone up again
Sent from my GT-N7000 using xda premium

why m i unable to uninstall autolock application tried it in various ways but still unable to uninstall help guys ny advice

anvesh3773 said:
why m i unable to uninstall autolock application tried it in various ways but still unable to uninstall help guys ny advice
Click to expand...
Click to collapse
try to clean cache in settings>>>applications>>>manage applications>>>find autolock app>>>clear data>>>and unistal....
if is not working download titanium backup....and delete this app

If autolock doesnt work with your flip case you can try "Proximity Screen Off" which is a similar app.
Or just increase the reading interval to 3 seconds.
To uninstall you must remove admin rights to the sensor first. In settings -> localisation --> admin rights
Dont use both apps at the same time or it will do a mess !

I tried that one too, for some reason the proximity sensor works when the case flap is a few mm from the screen, but when the flap is shut all the way the sensor doesn't register it, so tries to turn back on again.
Sent from my GT-N7000 using xda premium

jimbob456 said:
I tried that one too, for some reason the proximity sensor works when the case flap is a few mm from the screen, but when the flap is shut all the way the sensor doesn't register it, so tries to turn back on again.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
i posted about this a few weeks ago. Dint seem to gather much attention.
The flip case does not work if it touches the screen. It has to be a few mm away.
http://forum.xda-developers.com/showthread.php?t=1379719

Nice Idea but need think tow times

drgopoos said:
i posted about this a few weeks ago. Dint seem to gather much attention.
The flip case does not work if it touches the screen. It has to be a few mm away.
http://forum.xda-developers.com/showthread.php?t=1379719
Click to expand...
Click to collapse
wish i read this before, would have saved 2 hours of my life messing about with it, ha
Sent from my GT-N7000 using xda premium

anvesh3773 said:
why m i unable to uninstall autolock application tried it in various ways but still unable to uninstall help guys ny advice
Click to expand...
Click to collapse
Disable administrative privileges

I had to let go of the auto lock, the sensor doesn't work half the time. I was using proximity lock app, do you guys think it has something to do with the app? Or the very idea of locking with proximity is a flawed one?

works like a charm
with this case : zenus GALAXY NOTE PRESTIGE CARBON DIARY

autoclock work my note well , both close and wake , I set magnetic threshold 950 microTesla , it run better , I used flip case .

drvanneo said:
autoclock work my note well , both close and wake , I set magnetic threshold 950 microTesla , it run better , I used flip case .
Click to expand...
Click to collapse
Is that app - autolock ( can u give us the link as there are few different autolock apps by the same name )
Second - Do u use the samsung flip case ?
Thanks

down from market : Autoclock of Gabor Szanto. yes i used the samsung flip case , if no flip open autoclock go to setting disable flip. But it is very bettery drain # 2% per 1h. Wish u happy
Sent from my GT-N7000 using XDA Premium App

I noticed phone does Not go into deep sleep mode when service is running.
Sent from my GT-N7000 using Tapatalk

choikugi said:
I noticed phone does Not go into deep sleep mode when service is running.
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
No need to notice it, it was stated in the first post that it doesn't go into deep sleep preventing battery saving power modes.

zkyevolved said:
No need to notice it, it was stated in the first post that it doesn't go into deep sleep preventing battery saving power modes.
Click to expand...
Click to collapse
He meant 'Wakes up' mode. He did not specifically mention for 'Closing' mode. That is why I said 'service is running'

[App] Power Switch - turn off your screen by shutting the case!

Hi guys, Im the dev of an app that will allow you to send your Tab to sleep when you shut its case. The PR is after the break.
Now that we have three high end tablets with proximity sensors (Note, 7+ and 7.7) its time we did some testing to see what sensitivities we should set in the app by default.
Please help us out with this. Simply download the free app, mess around with proximity settings until they work and report back what lever (in %) you needed.
Note that the current auto-selection prompt will only enable the light sensor if you pick "Tablet" in the first run dialog. You will need to turn the proximity detection on manually in the app's settings, as your tablets actually have this sensor!
Thanks in advance, and i hope you like the app
--------------------------------
Power Switch:
Power Switch is a tool for devices with cases - somewhat like the SmartCover, it will turn off the screen when you shut the case. If you have a device with poor
battery life, Power Switch can save tons of juice by switching it off entirely after a given amount of time asleep.
The app works best on phones using the proximity sensor. On tablets, the light sensor is the most efficient method of knowing that the case has been closed.
Features:
- Sleep seconds after shutting case
- Automatic shutdown (rooted devices only)
- Set up a schedule using Night Mode
- Configure sensor sensitivity
- Facedown to turn screen off
- Persistent notification
- Plays sound to let you know that the screen has turned off
The app has gone through an extensive testing process here at XDA under another name. Thanks to everyone who helped make it happen, you're the best!
Remember to adjust the light sensor sensitivity settings in a light environment for best performance, and use Night Mode if you are on a tablet with a poor ambient light sensor.
If you have any comments or suggestions, please use this thread or the in-app feedback tool. Please be aware that we ignore logs without descriptions.
Market link:
https://market.android.com/details?id=fahrbot.apps.powerswitch.demo
The Lite version of the app is exactly the same as the Pro, only the timers are restricted to a minimum of twelve seconds.
Screens:

I'll definitely try this when I get my tablet back from Samsung in the next couple days! Thanks!

Please do, let me know.
Sent from my GT-P7500 using xda premium

ftgg99 said:
Please do, let me know.
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
I used this app for about a week. Seemed to work fine i forgot it was there. I wiped my tablet and did not reinstall the program. I did find that the thresholds had to be adjusted with my case tablet combination.

Right, but what were they? Stick to the topic please.
Sent from my GT-P7500 using xda premium

I reinstalled the app, to get it to work and not be intrusive I have the light sensor set at 13% and the prox set at 33%. It takes about 20 seconds to turn off the screen after I close the case.

painter_ said:
I reinstalled the app, to get it to work and not be intrusive I have the light sensor set at 13% and the prox set at 33%. It takes about 20 seconds to turn off the screen after I close the case.
Click to expand...
Click to collapse
In the lite version, the minimum time is 12 seconds...

Hate to point this out...
It's been done before, and for free....
Here.

Please don't do that, its not cool. Added to ignore list.
Sent from my GT-P7500 using xda premium
MOD EDIT: There is no reason to name call when someone is trying to be helpful.

Providing users with a free alternative is most certainly cool.
It's up to you, as a developer, to give the users a reason to purchase YOUR application with features which the other developers don't offer.
Adding people to your ignore list is obtuse, it shows you're not open to fair competition and gives the users another reason NOT to go for your paid apps.

painter_ said:
I reinstalled the app, to get it to work and not be intrusive I have the light sensor set at 13% and the prox set at 33%. It takes about 20 seconds to turn off the screen after I close the case.
Click to expand...
Click to collapse
Are you saying you need both sensors?

It doesnt work on my galaxy tab 7.7 when I close the lid of my samsung book cover. I have tried on proximity sensor, proximity + light sensor, both failed

Considering that there are no real custom roms for the 7.7 and it works perfectly my my own tab, you should be trying different sensitivity settings.

Its working perfectly here! Thank for this awesome app!

Anything other than praise to report

Any issues to report?

Nope, still works well

Anything to report?

acolwill said:
Providing users with a free alternative is most certainly cool.
It's up to you, as a developer, to give the users a reason to purchase YOUR application with features which the other developers don't offer.
Adding people to your ignore list is obtuse, it shows you're not open to fair competition and gives the users another reason NOT to go for your paid apps.
Click to expand...
Click to collapse
Gotta agree.

rogerperk said:
Gotta agree.
Click to expand...
Click to collapse
Great! So long.

[APP][FREE] IntelliCover - Proximity Sensor Based Screen Control (On/Off + MORE)

Finally got my app up and running on the Market and being a die hard Galaxy Note and xda user, I thought it would only be appropriate to post it here for fellow users to enjoy. =)
IntelliCover is a utility which uses your device’s proximity sensor to control its display and allow fast and efficient access to your phone or tablet.
It turns the screen turns off automatically when you put your device in your pockets, close its flip cover, store the device in a bag, or even just leave the device facing down on a table. As soon as the device is back in your hand the proximity sensor is triggered again, the screen turns back on and your phone is instantly ready for use.
IntelliCover is more feature-filled than any other similar application on the market. And the best part? It's FREE!
Click here to visit the market page and download the app for free
P.S. If you find a bug, I'd appreciate if you could report it to me before giving a bad rating because it usually only takes me less than a day to fix.
*** Features ***
Calibration:-
Proximity Sensor Delay – Add a delay to the time takes to trigger the sensor and turn the screen off.
Application Settings:-
Automatic Unlock – Automatically dismiss the Unlock Screen, provided there is no password. *Experimental*
Disable in Landscape Mode – Disable the proximity sensor when an application is in landscape mode.
Go to Home Screen – Show the home screen when the screen turns on.
Screen Off Only – The screen will turn off but not on when the proximity sensor is triggered.
Screen On Only – The screen will turn on but not off when the proximity sensor is triggered.
Start on Boot – Automatically start the IntelliCover service when the device turns on.
Notifications:-
Proximity Warning – Vibrate every time the proximity sensor is triggered.
Status Bar Notification – Show an ongoing notification in the status bar.
Screen On and Off Actions:-
Airplane Mode – Enable or disable airplane mode.
Auto Rotate (will be removed) – Activate or deactivate.
Auto Sync – Activate or deactivate auto-sync.
Bluetooth – Enable or disable Bluetooth.
Haptic Feedback (will be removed) – Activate or deactivate haptic feedback.
Ringer Mode – Switch ringer mode to Normal (Sound with Vibration), Vibrate or Silent.
Wi-fi – Enable or disable wi-fi.
*** Frequently Asked Questions ***
Q) Is it really free? Where are the ads?
Ans) IntelliCover is completely free and has no ads whatsoever!
Q) Do I require a rooted device to use IntelliCover?
Ans) Nope. IntelliCover works on all supported phones and tablets, rooted or unrooted.
Q) Doesn’t using the proximity sensor consume a lot of battery?
Ans) Actually, the proximity sensor consumes minimal power, almost little enough to be insignificant.
Q) What are the ‘Screen On’ and ‘Screen Off’ actions?
Ans) IntelliCover allows you to set events to be triggered when the screen turn on or off. For example, by setting wi-fi to turn on when your screen turns on and setting it to turn off when the screen turns off, you could save a huge amount of battery power.
Q) Can I request a feature?
Ans) Of course! Head over to the Contact section to drop me an e-mail.
Q) Why does IntelliCover keep running in the background?
Ans) It has to run in the background to know when the proximity sensor is triggered.
Q) How can I uninstall the application?
Ans) First you must go into Security settings and remove IntelliCover from System Administrator. Then it can be uninstalled like any other application.
Q) Can I donate to the developer?
Ans) Not yet but hopefully I’ll have something set up soon.
*** Permissions Required ***
INTERNET - Required for error logging (to send crash reports)
WAKE_LOCK - Required to unlock screen
WRITE_SETTINGS - Required to toggle ringer mode
VIBRATE - Required to vibrate phone
RECEIVE_BOOT_COMPLETED - Required to detect phone boot
WRITE_SYNC_SETTINGS - Required to toggle autosync
READ_SYNC_SETTINGS - Required to toggle autosync
BLUETOOTH - Required to toggle bluetooth
BLUETOOTH_ADMIN - Required to toggle bluetooth
ACCESS_WIFI_STATE - Required to toggle WiFi
UPDATE_DEVICE_STATS - Required to toggle WiFi
CHANGE_WIFI_STATE - Required to toggle WiFi
*** Contact ***
Feel free to contact me at [email protected] with any issues, bug reports, feature requests, suggestions or queries. Please read the FAQ above before sending an e-mail to avoid redundancy.
Click here to visit the market page and download the app for free

Nice one mate.really good work.
Keep it up:thumbup:
Sent from my GT-N7000 using xda app-developers app

awsome app . really good
but need some work as ... i may close the phone an put it over the table ..... need option to not turn on the screen when its turn off manual

what happen when my hand somehow moves to the proximity sensor?

shivg86 said:
Nice one mate.really good work.
Keep it up:thumbup:
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Thanks! It's my first app so hearing from happy users is really exciting and inspiring.
engfantom said:
awsome app . really good
but need some work as ... i may close the phone an put it over the table ..... need option to not turn on the screen when its turn off manual
Click to expand...
Click to collapse
Oh I get it. Thanks for pointing that out. I'll try to fix it as soon as possible. I have exams right now but after that (in a week probably) I'll release a fixed, updated version. And thanks also for the rating. With a new app, it really helps to get good ratings
meethere said:
what happen when my hand somehow moves to the proximity sensor?
Click to expand...
Click to collapse
Well there is a delay option. So you could set a delay of 2-3 seconds or more so that if you move your hand by mistake to the proximity sensor, it won't just turn off, it'll be delayed. Or you could set the vibrate function on so if your hand goes there, the phone will vibrate to warn you about it. :good:

Downloaded and voted with five stars.
Thanks mate. :laugh:

Downloading rite now..

good idea ! But, it's not working with flip cover.
Indeed, the screen turn off when the flip cover is at 5mm of the sensor but it turns on again when completely closed!!!
can you fix that?
keep on the good work ...
Sent from my GT-N7000 using xda app-developers app

samvox said:
good idea ! But, it's not working with flip cover.
Indeed, the screen turn off when the flip cover is at 5mm of the sensor but it turns on again when completely closed!!!
can you fix that?
keep on the good work ...
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Hmm...not sure. It works with my flip cover. Almost all phones (like Galaxy Note) have a proximity sensor that only detects FAR or NEAR. So even though I've told the application to turn the screen off when an object comes to a certain distance, either the hardware itself or the phone's firmware doesn't have the ability to detect the distance. Proximity sensors are only made to be used when on a call so it doesn't really need to detect distance in its regular everyday usage I guess.
I did have a similar problem to yours when testing with a sort of snake-skin leather Zenus case because it had some tiny ridges in it, but in most test cases it worked. I'll try my best to see if I can dig up a solution. =)

If I remember well, it depends on the color of the cover.
Darker means that the proximity doesn't work very well.
I have another proximity app, I'll switch to this one very soon, and I have to put a little white stripe on the cover,where the sensor is, to make it work correctly.
If I'm not wrong,is an issue with all the sensors and not a program fault.
Inviato dal mio GT-N7000 con Tapatalk 2

raistlin74 said:
If I remember well, it depends on the color of the cover.
Darker means that the proximity doesn't work very well.
I have another proximity app, I'll switch to this one very soon, and I have to put a little white stripe on the cover,where the sensor is, to make it work correctly.
If I'm not wrong,is an issue with all the sensors and not a program fault.
Inviato dal mio GT-N7000 con Tapatalk 2
Click to expand...
Click to collapse
Now that I think about it, that actually makes alot of sense. I don't know what it is with ALL sensors and black but they do tend to freak out. I even have an amazing Logitech mouse that works on mirrors and glass and see-through plastic and anywhere else except for on pitch black surfaces lol. The only crude fix I could think of is to use a combo of proximity sensor and light sensor somehow but it would be a waste of battery in my opinion.

Just tried your app, but didn't really worked : when I flip my (black) cover (or when I hide the sensor with my finger), the screens goes off but just for few seconds before getting on again. I'm using WidgetLocker btw, I don't know if it affects your app or not.
Edit : if you need logs or anything, feel free to ask

Sine. said:
Just tried your app, but didn't really worked : when I flip my (black) cover (or when I hide the sensor with my finger), the screens goes off but just for few seconds before getting on again. I'm using WidgetLocker btw, I don't know if it affects your app or not.
Edit : if you need logs or anything, feel free to ask
Click to expand...
Click to collapse
Hi! I'm still searching into it but it would seem that darker colors do not work well with the proximity sensor. Since this doesn't really have much to do with the actual programming itself I'm not sure I can do much about that.
BUT it should work when you use your finger. WidgetLocker shouldn't make a difference, it just works like any other lockscreen so it won't affect the functionality of my app. The fact that it turns on after a while baffles me though, because programmatically it doesn't make sense to me.
If you don't mind, could you please try putting the phone down on a surface or putting it in your pocket to test it? The proximity sensor is pretty sensitive so if you'd moved your finger even a bit it could have gotten triggered. Let me know if it still doesn't work and then we can move on to the messy part.
*yawn* Time for bed

This is happening right now!
Sorry, was just shocked when I actually saw the posting dates/time, I always assume apps have been around and had the bugs worked out, but I see this is newly born! So, for an i717 Note (AT&T Branded) this should essentially work the same, right? I mean there are no processor specific requirements or such? I am a releatively new Note owner - just a few days, and I have rooted, flashed a nice ROM, and ordered an awesome leather cover (NOT the cheesy flip cover) and I went looking for a proximity sensor based "cover detection app" - this sounds good, nice options to fine tune, and the dev sounds really into making this work well. Sounds like a winner. I will grab this now, but will not have my cover till Monday. It is NOT black, LOL, so I will test and report how well it works soon after i get my cover. I also got the Samsung branded car mount (I am going broke getting these, for my HTC phones, then GSII, then GSII Skyrocket (slightly larger) and now Note (LOTS LARGER, LOL!) Oh, so why am I telling you about my car dock? Because it's awesome, LOL!!! Nah, just kidding, (but it IS awesome) - I am wondering if being in a darkened car, like at night might trip the proximity sensors threshold for available light and kill the screen. Anyway, if you don't know that's okay. If it does trip the sensor, I will let you know.
Thanks again for a quality app, with no ads, and free. Always a pleasure - gonna put a price on it when it's perfect? If so remember your testers, hehe.

awsome app, nice job !:good:

SmartAs$Phone said:
Sorry, was just shocked when I actually saw the posting dates/time, I always assume apps have been around and had the bugs worked out, but I see this is newly born! So, for an i717 Note (AT&T Branded) this should essentially work the same, right? I mean there are no processor specific requirements or such? I am a releatively new Note owner - just a few days, and I have rooted, flashed a nice ROM, and ordered an awesome leather cover (NOT the cheesy flip cover) and I went looking for a proximity sensor based "cover detection app" - this sounds good, nice options to fine tune, and the dev sounds really into making this work well. Sounds like a winner. I will grab this now, but will not have my cover till Monday. It is NOT black, LOL, so I will test and report how well it works soon after i get my cover. I also got the Samsung branded car mount (I am going broke getting these, for my HTC phones, then GSII, then GSII Skyrocket (slightly larger) and now Note (LOTS LARGER, LOL!) Oh, so why am I telling you about my car dock? Because it's awesome, LOL!!! Nah, just kidding, (but it IS awesome) - I am wondering if being in a darkened car, like at night might trip the proximity sensors threshold for available light and kill the screen. Anyway, if you don't know that's okay. If it does trip the sensor, I will let you know.
Thanks again for a quality app, with no ads, and free. Always a pleasure - gonna put a price on it when it's perfect? If so remember your testers, hehe.
Click to expand...
Click to collapse
lol Well let's get one thing out the way. This app is and will be free (and ad-free) forever. So don't worry about that. Who knows, maybe a long way into the future I might release a paid app to earn a little cash but I don't plan on doing so anytime soon, and surely not to this app.
As for compatibility, as long as your phone has a proximity sensor the app should work (though I'm working out some problems on the smaller phones) so yes, it should work on your phone, no problem. Just hope it works out with your cover though. My cover is sort of a really dark deep brown and it doesn't work at times so I tend not to use that one. I do alot of coding and testing at night btw, and it doesn't just trigger the proximity sensor, so I strongly doubt a darkened car would trigger it.
Good luck with your Note btw. I really think you made the right choice. I've had mine for a year now. I'm just in college so I can't buy Note 2 or I would have. The way Samsung talks about Note 2 though makes me believe I'll have the chance to grab a Note 3 sometime in the future. =)

YES! FINALLY! Fix for all Gingerbread devices coming soon. Should be up within a day or two after some testing. Then I'll work on widgets and optimization and other stuff after I'm done with exams.

i installed this app. but when i close the flip cover, it just locks the screen . opening the cover does nothing

it doesn't properly works
I don't know why, but when I put my finger on sensor it works, with my black cover don't

nokiamodeln91 said:
i installed this app. but when i close the flip cover, it just locks the screen . opening the cover does nothing
Click to expand...
Click to collapse
Could you please give me a little more information? Just basic stuff like the device model and Android version and whatever else you think is important, and I'll look into the issue.
Giopon said:
I don't know why, but when I put my finger on sensor it works, with my black cover don't
Click to expand...
Click to collapse
Yes, unfortunately this isn't a problem with the application. Proximity sensors don't work well on darker colors. That's why it might work with your finger and maybe in your pocket but not with a black cover. Sorry, this is a problem with hardware, not with the app, so I can't fix that. Only thing I can tell you is that you're not alone. Pretty much all proximity sensors have trouble with black, not just yours.

How to unlock screen without having to press the power button?

is there any way to unlock the phone without pressing the power button or double tap to wake? it's like just rest your finger in the sensor and the screen unlocks.

This behaviour is currently in HaoZeke's LineageOS. I'm looking for a way to disable it since it will unlock my phone while putting it in my pocket... Wanna trade ?

calvinerico said:
is there any way to unlock the phone without pressing the power button or double tap to wake? it's like just rest your finger in the sensor and the screen unlocks.
Click to expand...
Click to collapse
I use a xposed module for that, [LL-MM]Enable Ambient Display - Xposed. Just install it and enable the option Activate doze with proximity sensor.
When you get the mobile out of your pocket, will turn on the display and it would be ready to use the FP reader.

MichaMichaMicha said:
This behaviour is currently in HaoZeke's LineageOS. I'm looking for a way to disable it since it will unlock my phone while putting it in my pocket... Wanna trade ?
Click to expand...
Click to collapse
Yeah im curious how can Haozeke's Lineage can have that mod.. lol trading mod's yes
lionelbac said:
I use a xposed module for that, [LL-MM]Enable Ambient Display - Xposed. Just install it and enable the option Activate doze with proximity sensor.
When you get the mobile out of your pocket, will turn on the display and it would be ready to use the FP reader.
Click to expand...
Click to collapse
That would drain the battery. Is there any way without ambient display?

calvinerico said:
Yeah im curious how can Haozeke's Lineage can have that mod.. lol trading mod's yes
That would drain the battery. Is there any way without ambient display?
Click to expand...
Click to collapse
It doesn't cause battery drain, my battery duration is almost the same with that module enabled.

Always on display (no root)

Stumble upon this app while browsing through the play store. It has various modules as well as a module that activates Always on in oos.
Aod can be customised as well.
So far i have not tested it thoroughly so i dont have much info about battery life and all. Will report back after using it for some time.
Download
https://play.google.com/store/apps/details?id=host.stjin.cometin

Thanks, I'm going to give it a try. Especially for the ambient display.

Fingerprint sensor works in the AOD?

Guys let's see battery drain ?

Is this working good for anyone? It was very buggy for me

rohitvaranasi23 said:
Fingerprint sensor works in the AOD?
Click to expand...
Click to collapse
No it doesn't work

Inbuilt ambient display should be off? DTW should be off? I can't make it work on my device