Hi guys!
So I was flashing my mums moto g (xt1032) for the first time in ages. I was upgrading from 4.1 (i think) to 6.0 (http://forum.xda-developers.com/moto-g/development/caf-aosp-aosparadox-project-1-0-t3135626). After all this happened I have realised the xt1032 is not the falcon and I wonder if this is what caused all my problems...?
Anyway, to the problem at hand. After trying to flash, it told me my bootloader was incompatible so I upgraded it to 41.18, flashed the rom again and it went fine. Then I restarted to boot into the rom but it put me into the bootloader. It comes up with "Fastboot Reason: Fall-through from normal boot mode". Now something else that is weird...I can move down the bootloader options with the down key but when I press "up" to select it just flashes the motorola boot screen for a split second (was the "your bootloader is unlocked" screen but I have flashed another boot logo since). This happens when I try to select any option [EDIT 1] I should note that I have a feeling this may have been the case for a while and not related to me flashing the rom or bootloader before - but I can't say for certain. I have tried using mfastboot to flash stock, specifically - ASIA-DS_4.4.4_KXB21.14-L1.40_34_cid7_CFC_1FF which ran mostly successfully but failed to flash the motoboot.img (guessing it can't downgrade the bootloader). This didn't make any difference to the operation of the phone. Now I'm currently downloading the BRASIL_XT1032_5.0.2 stock rom but it is taking forever, really bad host.
Also, I can flash a recovery image but when I try to boot it with "fastboot boot recovery.img" it starts doing it but then shows me an error - something about "remote failed".
[EDIT 1] I have noticed that it does allow me to select the option "barcodes" to show imei information. But for any other option it just says "Boot up failed".
Anyone got any ideas? Been out of the phone flashing biz for too long, it's my mums phone and I'm supposed to be doing my dissertation so any help would be greatly appreciated!
[EDIT 2]
C:\android-sdk\platform-tools>mfastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 4118
(bootloader) product: peregrine
(bootloader) secure: yes
(bootloader) hwrev: 0x82D0
(bootloader) radio: 0x3
(bootloader) emmc: 8GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) ram: 1024MB Samsung S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8926
(bootloader) serialno: TA47XXXXXXXX
(bootloader) cid: 0x0007
(bootloader) channelid: 0x41
(bootloader) uid: 9D00EB0315000000000000000000
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from normal boot mode
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Fri Jan 22 16:54:20 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/peregrine_reteu/peregrine
(bootloader) ro.build.fingerprint[1]: :4.4.4/KXB21.14-L1.46/42:user/rele
(bootloader) ro.build.fingerprint[2]: ase-keys
(bootloader) ro.build.version.full[0]: Blur_Version.21.1.46.peregrine_re
(bootloader) ro.build.version.full[1]: teu.reteuall.en.EU
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.020
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g26ca2df ([email protected]
(bootloader) kernel.version[1]: ilclbld26) (gcc version 4.7 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Tue May 27 02:43:50 CDT 2014
(bootloader) sdi.git: git=MBM-NG-V41.18-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V41.18-0-g5742832
(bootloader) rpm.git: git=MBM-NG-V41.18-0-gcecd6e9
(bootloader) tz.git: git=MBM-NG-V41.18-0-g99c1a7c
(bootloader) aboot.git: git=MBM-NG-V41.18-0-g99084d5
(bootloader) qe: qe 1/1
(bootloader) ro.carrier: retgb
all: listed above
finished. total time: 0.093s
DoNiMaToR said:
So I was flashing my mums moto g (xt1032) for the first time in ages. [...] After all this happened I have realised the xt1032 is not the falcon and I wonder if this is what caused all my problems...?
...
(bootloader) product: peregrine
Click to expand...
Click to collapse
XT1032 is a falcon, XT1039/40/45 is peregrine. You are trying to install stuff for the wrong device, which is generally a bad idea.
Yep was a silly mistake by me! I'd assumed it was an XT1032 for some reason that I cannot remember, it's actually the XT1039 - flashed it with the correct ROM now. Thanks for your help
All working as normal now. For anyone with similar issues, get the IMEI number from the bootloader and check exactly what model you have using this - IMEI info checker.
Related
Hey Guys,
I got a bricked Moto G from a friend of mine. The device boots untill it gets to the m logo and then reboots. Device doesn't boot into recovery or doesn't do a factory reset. But i can get into fastboot.
I'm familiar with nexus and samsung devices so I already tried a lot of things but nothing seems to work.
I unlocked the bootloader but no change, tried to reflash stock firmware (RETAIL-BR-SS_4.4.4_KXB21.14-L1.40_42_cid12_CFC_1FF_SVC) via mfastboot but no change.
I tried the hard bricked tutorial found on this forum but my device shows up as fastboot falcon s in my device manager and is not detected when i use the driver for "Qualcomm HS-USB QLoader 9008" it keeps giving me waiting for device when trying to execute the clean flash bat.
I tried to brick the bootloader with the Bootloader bricker but it still shows up as fastboot falcon s.
Any ideas?
The device info for this device is (i deleted serial, there was no imei):
Quote:
(bootloader) version: 0.5
(bootloader) version-bootloader: 4113
(bootloader) product: falcon
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x1
(bootloader) emmc: 8GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) ram: 1024MB Samsung S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8226 CS
(bootloader) serialno:
(bootloader) cid: 0x0007
(bootloader) channelid: 0x00
(bootloader) uid: 5EE000020F000000000000000000
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Sep 10 18:59:52 UTC 2014"
(bootloader) ro.build.fingerprint[0]: motorola/falcon_reteu/falcon_umts:
(bootloader) ro.build.fingerprint[1]: 4.4.4/KXB21.14-L1.40/36:user/relea
(bootloader) ro.build.fingerprint[2]: se-keys
(bootloader) ro.build.version.full[0]: Blur_Version.210.12.40.falcon_umt
(bootloader) ro.build.version.full[1]: s.EURetail.en.EU
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.020
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-gb89c9dd ([email protected]
(bootloader) kernel.version[1]: ilclbld54) (gcc version 4.7 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Fri Jun 20 05:33:52 CDT 2014
(bootloader) sdi.git: git=MBM-NG-V41.13-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V41.13-0-g683cb0c
(bootloader) rpm.git: git=MBM-NG-V41.13-0-g71b1aae
(bootloader) tz.git: git=MBM-NG-V41.13-0-ga27c415
(bootloader) aboot.git: git=MBM-NG-V41.13-0-g7dc8e78
(bootloader) qe: qe 0/1
(bootloader) ro.carrier: unknown
all: listed above
finished. total time: 0.057s
Press any key to continue . . .
Like I've said in the other topic, try this:
BobDiaz said:
Can you give us more details?
Like if this is really a bootloop (in wich you would see that white image with an exclamation mark for a loooong time) or if you just can't switch your phone on?
I've read about it and, in a situation like yours, the phone usually bricks...
______________________________________
Edit:
When it happened to me, I did the following:
Download and execute the .bat of this topic after installing the phone drivers.
forum. xda-developers. com/ moto-g/general/ guide-xt1033-downgrade-lollipop-5-0-to-t2969729
After this, my phone went to the GPE but it could not flash an stock rom. Than, I did this:
forum. xda-developers. com/ moto-g/general/guide-moto-g-xt1033-android-5-0-lollipop-t2979623
Follow this steps exactly the way its written and it should work.
Click to expand...
Click to collapse
Hey bobdiaz,
I didn't see a reply on the other thread from you but this didn't happen when downgrading. It has always been a 4.4.4 but i wil try the things you suggest!
Oké the explanation you gave me does not resolve my problem.
But i'm pretty sure the brick doesn't come from a downgrade from version 5.
Any other suggestions?
I think I permanently soft bricked my phone.
Possible reasons
I tried to to flash cm-12-20150115-NIGHTLY-falcon from recovery-clockwork-touch-6.0.4.7-falcon . I couldn't figure out how to go to recovery mode from fastboot, so I went there with command prompt via "fastboot boot openrecovery-twrp-2.7.1.0-xt1032.img" . From there, I went to flash CM 12 nightly, but I made one fatal error, I never backed up my stock rom The device restarted, but it took me to "Fastboot reason: Fall-through from normal boot mode". I tried to go to recovery and normal powerup, but I got the message "boot up failed".
Attempted fixes
I scoured the interned to find a possible solution, I tried to re-install a new recovery from fastboot, but I always got the message "Mismatched partition size". I tried to boot from a recovery like I did before with "fastboot boot openrecovery-twrp-2.7.1.0-xt1032.img", but I had no avail, as this message showed up:
downloading 'boot.img'...
OKAY [ 0.275s]
booting...
FAILED (remote failure)
finished. total time: 0.476s
I even followed this thread, http://forum.xda-developers.com/showthread.php?t=2542219 (for restoring the stock firmware), and did everything down to the very letter, and it still didn't work. I kept getting messages like "bab check failed for boot" or "bab check failed for recovery"
I am at my wits end. I don't know if there is anything else to do. If anyone can find a solution to my problem, I'll be forever grateful.
Here is some useful info:
I rememeber updating my phone from ICS to KITKAT (4.4.4) months before i tried to root/flash it.
I bought my phone in the US
"get var all" returns
(bootloader) version: 0.5
(bootloader) version-bootloader: 4113
(bootloader) product: peregrine
(bootloader) secure: yes
(bootloader) hwrev: 0x82D0
(bootloader) radio: 0x1
(bootloader) emmc: 8GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) ram: 1024MB Samsung S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8926
(bootloader) serialno: TA95000LZM
(bootloader) cid: 0x0009
(bootloader) channelid: 0x8d
(bootloader) uid: 85054F0115000000000000000000
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from normal boot mode
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Fri Jan 16 21:19:52 UTC 2015"
(bootloader) ro.build.fingerprint[0]: motorola/peregrine_retus/peregrine
(bootloader) ro.build.fingerprint[1]: :4.4.4/KXB21.14-L1.56/56:user/rele
(bootloader) ro.build.fingerprint[2]: ase-keys
(bootloader) ro.build.version.full[0]: Blur_Version.21.11.56.peregrine_r
(bootloader) ro.build.version.full[1]: etus.retus.en.US
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.020
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-gc20375a-00001-g804
(bootloader) kernel.version[1]: 2017 ([email protected]) (gcc version 4
(bootloader) kernel.version[2]: .7 (GCC) ) #1 SMP PREEMPT Wed Aug 6 01:2
(bootloader) kernel.version[3]: 3:55 CDT 2014
(bootloader) sdi.git: git=MBM-NG-V41.13-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V41.13-0-g683cb0c
(bootloader) rpm.git: git=MBM-NG-V41.13-0-g71b1aae
(bootloader) tz.git: git=MBM-NG-V41.13-0-ga27c415
(bootloader) aboot.git: git=MBM-NG-V41.13-0-g7dc8e78
(bootloader) qe: qe 1/1
(bootloader) ro.carrier: retus
all: listed above
croissanwish said:
I think I permanently soft bricked my phone.
Possible reasons
Click to expand...
Click to collapse
Why are you flashing falcon(xt1032) stuff to your peregrine(xt1045)?
They are not interchangeable.
meekrawb said:
Why are you flashing falcon(xt1032) stuff to your peregrine(xt1045)?
They are not interchangeable.
Click to expand...
Click to collapse
Oh I didn't know that. I'm kind of new to this. Which recovery should I flash?
@croissanwish Hi you have a MOTO G 4G (XT1042 in your case). You need to use this custom recovery https://www.androidfilehost.com/?fid=95864024717072097 TWRP 2.8.3.0 (Credits to Somcom3X). Then and only then flash the custom firmware you want from the http://forum.xda-developers.com/moto-g/4g-development area
If you still have issues after that then PM me.
hacktrix2006 said:
@croissanwish Hi you have a MOTO G 4G (XT1042 in your case). You need to use this custom recovery https://www.androidfilehost.com/?fid=95864024717072097 TWRP 2.8.3.0 (Credits to Somcom3X). Then and only then flash the custom firmware you want from the http://forum.xda-developers.com/moto-g/4g-development area
If you still have issues after that then PM me.
Click to expand...
Click to collapse
Thanks, I got it to work now, it turns out I was using the wrong recovery.
Every time the phone get started the recovery is loaded. In recovery i had to boot into bootloader and then i have to select the normal "powerup ". et voila the rom loads normaly and everythink is working fine.
I got the moto g with bootloop from a friend. Then I tried to lift 5.1.x. I tried different Rom versions (including cm12.1) , and also diffrent recovery.
With stock recovery the droid lies back, but now menu. Now with TWRP-2.8.7.0.-falcon_STOCK_NOTHEME.img recovery is stable and everythink works.
Bootloader I tested 41.18 and 41.19, but both identical result.
On satellite receiver I would tap to broken environments in bootloader, but the mobile device I am blank.
Is naturally mega cumbersome without WAF!!!!
Where can I look what is going wrong, someone has a tip how to fix this boot Problem?
next try: can somebody post the result in fastboot from:
Code:
fastboot getvar all
or
Code:
mfastboot getvar all
my phone:
Code:
C:\MOTO\>mfastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 4118
(bootloader) product: falcon
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x1
(bootloader) emmc: 8GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) ram: 1024MB Samsung S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8226 CS
(bootloader) serialno: TA92904GMH
(bootloader) cid: 0x0007
(bootloader) channelid: 0x00
(bootloader) uid: 17DF480XXX000000000000000000
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Mar 12 15:24:29 UTC 2015"
(bootloader) ro.build.fingerprint[0]: motorola/falcon_gpe/falcon_umts:5.
(bootloader) ro.build.fingerprint[1]: 1/LMY47M.M001/6:user/release-keys
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-ga838857 ([email protected]
(bootloader) kernel.version[1]: pe) (gcc version 4.8 (GCC) ) #1 SMP PREE
(bootloader) kernel.version[2]: MPT Tue Mar 17 11:09:24 PDT 2015
(bootloader) sdi.git: git=MBM-NG-V41.18-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V41.18-0-g5742832
(bootloader) rpm.git: git=MBM-NG-V41.18-0-gcecd6e9
(bootloader) tz.git: git=MBM-NG-V41.18-0-g99c1a7c
(bootloader) aboot.git: git=MBM-NG-V41.18-0-g99084d5
(bootloader) qe: qe 0/1
(bootloader) ro.carrier: unknown
all: listed above
finished. total time: 0.059s
maybe there is something wrong?
problem is solved:
1) TWRP- Backup from the running system
2) restore stock 5.02 (click)
3) then the droid lies back and nothing goes on
4) boot to bootloader run factory default
5) then the stock image boots
6) reboot tobootloader
7) install TWRP 2.8.7.0
8) TWRP - Restore
9) finish
i'm sure that 3),4),5) is not necessary.
So here's what all I did with my XT1033. (Asia_Retail)
Flashed an AOSP Slim 6 ROM. - Worked fine for over a month.
Wanted to return to STOCK.
Followed steps:
- Used XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml.zip
- Extracted and flashed using the fastboot commands.
- Every partition flashes with NO ERROR.
But rebooting the phone leads me to the AOSP Slim bootanimation.
Also system boots somewhat frozen, i.e no touch response.
**Even the stock recovery doesn't work, it still loads up TWRP (Also frozen, stuck at TWRP bootsplash)
Though I have flashed several times using mfastboot-v2.
So end result.
Fastboot seems to working fine but has no effect.
*** I can only boot in the fastboot mode.
Any help or information which would guide me in the right direction would be appreciated.:fingers-crossed:
Thanks for help guys.
Fastboot getvar all info
dracovoldy said:
So here's what all I did with my XT1033. (Asia_Retail)
Flashed an AOSP Slim 6 ROM. - Worked fine for over a month.
Wanted to return to STOCK.
Followed steps:
- Used XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml.zip
- Extracted and flashed using the fastboot commands.
- Every partition flashes with NO ERROR.
But rebooting the phone leads me to the AOSP Slim bootanimation.
Also system boots somewhat frozen, i.e no touch response.
**Even the stock recovery doesn't work, it still loads up TWRP (Also frozen, stuck at TWRP bootsplash)
Though I have flashed several times using mfastboot-v2.
So end result.
Fastboot seems to working fine but has no effect.
*** I can only boot in the fastboot mode.
Any help or information which would guide me in the right direction would be appreciated.:fingers-crossed:
Thanks for help guys.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 411A
(bootloader) product: falcon
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x5
(bootloader) emmc: 16GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) ram: 1024MB Samsung S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8226 CS
(bootloader) serialno: TA91601GLT
(bootloader) cid: 0x0007
(bootloader) channelid: 0x00
(bootloader) uid: 61BBC1020F000000000000000000
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Jun 23 1:17:28 UTC 2015"
(bootloader) ro.build.fingerprint[0]: motorola/falcon_asia_ds/falcon_umt
(bootloader) ro.build.fingerprint[1]: sds:5.1/LPB23.13-56/55:user/releas
(bootloader) ro.build.fingerprint[2]: e-keys
(bootloader) ro.build.version.full[0]: Blur_Version.221.21.56.falcon_umt
(bootloader) ro.build.version.full[1]: sds.AsiaRetail.en.03
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband: MSM8626BP_1032.3116.98.00R EMEA_DSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-g89906d6 ([email protected]
(bootloader) kernel.version[1]: ilclbld32) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Mon Aug 17 10:37:16 CDT 2015
(bootloader) sdi.git: git=MBM-NG-V41.1A-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V41.1A-0-g199f3c5
(bootloader) rpm.git: git=MBM-NG-V41.1A-0-g8b7736e
(bootloader) tz.git: git=MBM-NG-V41.1A-0-g99c1a7c
(bootloader) aboot.git: git=MBM-NG-V41.1A-0-g80481ae
(bootloader) qe: qe 1/1
(bootloader) ro.carrier: unknown
all: listed above
finished. total time: 0.084s
BUMP!
ADB seems to work fine too. I can pull/push files from my SD Card
First I apologize for my english. I bought this phone bricked (perhaps because of a fastboot erase all command) for a very little price... and I'm trying to repair it for personal use. A my friend has a XT1039 so I dumped all his partitions in .img files, to help me restore. The first problem I saw was that the CID was set to 0xDEAD (I think that that means that I can't flash the system sparechunks)... So I tried to restore it via fastboot flash cid cid.img but it returned a "Permission denied!" error. The device boots directly in the bootloader, printing "Device is LOCKED. Status Code: 0", but I know that the bootloader was unlocked by the first owner. I've flashed all the partitions of the motorola firmware (but none of the backup that I made whit the other phone) yet, whithout the system sparechunks that return me a "Invalid signature - preflash validation failed error". Another sorry for my poor english, I'm ready for questions, and I post the fastboot getvar all below.
Code:
XT1039>mfastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 411A
(bootloader) product: peregrine
(bootloader) secure: yes
(bootloader) hwrev: 0x82D0
(bootloader) radio: 0x3
(bootloader) emmc: 8GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) ram: 1024MB Elpida S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8926
(bootloader) serialno: TA34801RFG
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0xDEAD
(bootloader) uid: 40B5090A15000000000000000000
(bootloader) unlocked: Not supported
(bootloader) iswarrantyvoid: Not supported
(bootloader) mot_sst: 8
(bootloader) max-download-size: 536870912
(bootloader) reason: UTAG "flashfail" configured as fastboot
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Jan 1 8:35: 5 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/peregrine_reteu/peregrine
(bootloader) ro.build.fingerprint[1]: :5.1/LPB23.13-17/18:user/release-k
(bootloader) ro.build.fingerprint[2]: eys
(bootloader) ro.build.version.full[0]: Blur_Version.23.21.17.peregrine_r
(bootloader) ro.build.version.full[1]: eteu.reteuall.en.EU
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband: M8926_309101.02.03.14R EMEA_CUST
(bootloader) kernel.version[0]: Linux version 3.4.42+ ([email protected]
(bootloader) kernel.version[1]: n-3421) (gcc version 4.9.4 20150629 (pre
(bootloader) kernel.version[2]: release) (crosstool-NG 1.20.0 - Linaro G
(bootloader) kernel.version[3]: CC 2015.06 - Cortex-A7) ) #1 SMP PREEMPT
(bootloader) kernel.version[4]: Wed Sep 23 19:59:44 CLT 2015
(bootloader) sdi.git: git=MBM-NG-V41.1A-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V41.1A-0-g199f3c5
(bootloader) rpm.git: git=MBM-NG-V41.1A-0-g8b7736e
(bootloader) tz.git: git=MBM-NG-V41.1A-0-g99c1a7c
(bootloader) aboot.git: git=MBM-NG-V41.1A-0-g80481ae
(bootloader) qe: qe 1/1
(bootloader) ro.carrier: reteu
all: listed above
finished. total time: 0.124s
Same situation.
I was also suffering fro erase all command and did the same as u did... Flashed files from other model . Now bootloader is locked. cid dead ,unlocked not supported. Did you ever got a solution for this.
Same issue here, DEAD CID with Moto G 2nd Gen XT-1068. Anyone can help me?
gplambi said:
I was also suffering fro erase all command and did the same as u did... Flashed files from other model . Now bootloader is locked. cid dead ,unlocked not supported. Did you ever got a solution for this.
Click to expand...
Click to collapse
Hi,
Any luck with your set. I have XT1572 with "XT1572_CLARK_RETEU_5.1.1_LPH23.116-18" currently installed. Wanted to update it to Nugget so came across CID : 0xDEAD, channelid : 0xDEAD, unlocked : Not Supported,
C:\WINDOWS\system32>fastboot oem get_unlock_data
...
(bootloader) Failed to get unlock data, please try again!
FAILED (remote failure)
finished. total time: 0.006s
I need to know if i could install nugget or not.