Related
Hi everyone,
I bought a portable power source several days ago via Internet, and to be honest, this power source is really nice.
This power kit, which owns a capability of 2200mAh, is packed by 'dopod' (a company that affiliated to hTC), and it can force your phone to using its power as priority when it is plugged in.
BTW, the output port is mini USB, that means this power source not only can be used as Diamond's backup battery, but also can be applied to any kind of devices that supports miniUSB charging. Cheers!
Lifetron LT-005
Bought 2 weeks ago this one:
Lifetron LT-005
http://www.lifetrons.ch/Products/Products-MultiplePowerSystem.htm
4800mAh 5V output and really small. 85mm x 25mm x 40mm
I used it to keep my PSP, my Diamond and my IPod alive on my last business trip.
BeeGee_Tokyo said:
Bought 2 weeks ago this one:
Lifetron LT-005
http://www.lifetrons.ch/Products/Products-MultiplePowerSystem.htm
4800mAh 5V output and really small. 85mm x 25mm x 40mm
I used it to keep my PSP, my Diamond and my IPod alive on my last business trip.
Click to expand...
Click to collapse
where can you buy this?
edit: found it already. 129 USD, quite expensive!
I would rather buy this one: http://www.just-mobileonline.com/products_chargerseries_9.html, only 400 mAh less, and also small! (70mm x 52mm x 22mm)
Has anyone experience with it? Or does anyone know a better deal?
All look good but for sheer value and ease of use, I bought this from my local branch of maplins
£3 !!!!!!!
http://www.maplin.co.uk/Module.aspx?ModuleNo=222899
Uses standard AA or rechareable AA's to power/ charge your diamond
hays said:
All look good but for sheer value and ease of use, I bought this from my local branch of maplins
£3 !!!!!!!
http://www.maplin.co.uk/Module.aspx?ModuleNo=222899
Uses standard AA or rechareable AA's to power/ charge your diamond
Click to expand...
Click to collapse
Thats pretty damn cheap for maplin.
Think i'll go an pick up one of these on the way home!
I'm thinking of buying this one
I have the Proporta solution. http://www.proporta.com/F02/PPF02P05.php?t_id=4393&t_mode=des
...
And I found another Solar-Energy external power source....
solar charger
just got one of these and I will test it for a few days
http://usb.brando.com.hk/prod_detail.php?prod_id=00673
I just got a PowerPal (another AA battery device) as an emergency solution, should be handy for camping trips too.
I went into Jessops in York today (UK camera shop) and found they were doing Energizer Ultimate Lithium 4-packs for £3.91. If you believe their PDF datasheet, they have way more power than an alkaline battery under larger current draws.
How about this by Energizer...
http://www.energizer.com.sg/product_togo.htm
Another one I am going to be investing in before CES this year is a Callpod FuelTank... 4300mAh battery plus the ability to charge 2 items at once....
http://www.callpod.com/products/fueltank
I've been using the callpod dragon (first and second gen) for sometime with great success... I love it.... no chargepod in my car, but thinking about it soon....
How about this one? Found it at expansys while looking for external battery solutions....
http://www.expansys-usa.com/d.aspx?i=171883
Philips Power2Go
Hi
Im in the UK and have purchased:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=270309547326
In the couple of weeks i have had it ive used it to power my Diamond/PSP/NDS.
They do a more powerful version but this is ok for my needs...at the moment.
Regards
Wasim
What about this one?
http://www.dealextreme.com/details.dx/sku.19086
Merry xmas
Willem
I have just received an email from Mobilefun telling me I will not be getting the car mount I pre-ordered as it is now discontinued. I am not sure whether we should be worried or not that the official Samsung official mount for our few month old phones is now not going to be available. I have never seen a product discontinued before it was even sold.
Most peculiar. I've been checking around here too, no accessory to be found. Really need a car mount.
WTF!?!?!? That is kind of scary. I havent even had the chance to think about getting the "official" accessories as of yet and to hear something like this now???
Perhaps someone can confirm with Samsung and find out what the deal is on this?
I had the same with the carmount available on meritline... weird eh!
I've ordered the exact same of eBay though... kinda weird!
I won't argue with the mods but surely this is a news story not just an accessories one?
This is the one I ordered. Where on eBay did you find one?
http://mobile.engadget.com/2010/08/...ine-of-galaxy-s-accessories-uses-fascinate-t/
got this one:
http://cgi.ebay.com/ws/eBayISAPI.dl...BqcxH64%3D&viewitem=&sspagename=STRK:MEWNX:IT
t1mman said:
got this one:
http://cgi.ebay.com/ws/eBayISAPI.dl...BqcxH64%3D&viewitem=&sspagename=STRK:MEWNX:IT
Click to expand...
Click to collapse
I've got the brodit: http://www.mountonus.com/Samsung-Ga...t-With-Tilt-Swivel-Function-512167-26030.aspx
It's a real nice car kit.
The Brodit ones not bad but neither of them really appeals to me. I wanted one I could just clip the SGS into and it would be screen mounted and powered. No messing with wires or anything. I have tried to email Samsung about it but I am not holding onto any hope of a reply.
I bought one of the spider foot screen mount and it came with a car charger, leather pouch and a laynard. I was that impressed with it that I bought a second for my friend!
this is the one i have
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220669758413&ssPageName=STRK:MEWNX:IT
althought, i have a herbet richter tower back part so all i needed was the bit that actually holds the phone, and it s a perfect fit.
sean2476 said:
I bought one of the spider foot screen mount and it came with a car charger, leather pouch and a laynard. I was that impressed with it that I bought a second for my friend!
Click to expand...
Click to collapse
I got the same one, do you ever have trouble getting the phone out of the holder? My clip seems to be very stubborn and always catches on the backplate of the phone, just wondering if you had the same problem
Thought I would share with you what the higher ups in Samsung have to say about this.
My (continuing) Question
To: Executive Office
Subject: Re: Car dock
- Hide quoted text -
Thank you again for your reply.
I think you are misunderstanding and that we are not making progress so I will try to explain again. Last year Samsung announced the Car and Media dock for the Samsung Galaxy S. Retailers began to advertise them for sale and to order them from yourselves. Two months later the retailers were told by Samsung that they were discontinued. This was before ANY had been delivered to the retailers and as I have said only two months after they had been announced. The retailers then contacted their customers, myself amongst them, and informed us of this. I have been trying ever since to get an answer from yourselves as to why this line had been discontinued in all countries apart from the USA market just two months after they were announced and before any had been sold except those sold in the USA. A greater part of the 10 million+ Galaxy S phones sold were not sold to the USA market yet that market is the only one that has these promised accessories available. If you cannot provide an answer would you now raise this enquiry to the next tier please.
Click to expand...
Click to collapse
The answer
Good afternoon Mr Pitman
The reason why the unit won’t be available in any of the Samsung subsidiaries is due to sales and marketing reasons. As a manufacture of many products, sometimes a product that is closed to being released can be stopped due to the market for that product changing and to this reason the product can become discontinued.
Unfortunately we are unable to provide you any other information regarding this product as we only handle the aftercare service of a product that has been fully released, nor can we advise who the best contact for your query is.
I can advise you to write a letter to the following address: Samsung Mobile, Samsung House, 1000 Hillswood Drive, Chertsey, Surrey KT16 0PS, I cannot guarantee that they will response quickly but you query will be looked into be that team.
Regards
Mark Gooden
Senior Customer Advisor
Executive Office
Click to expand...
Click to collapse
Well, thats a gilbert answer... Gadgetization is androids weakest spot. And what gadgets and bling there is, well its fairly low quality.
This is iPhone's main advantage. One design and a forest of 3rd party manufacturers that have grown out of their garages and become professional suppliers.
There would be a huge upside for Samsung/HTC/Sony to mimic this by setting up their own production lines to mimic that market. I guess the problem is no one in house is willing to risk their neck and the people that sit on the money don't understand this part of the iPhone world.
I don't want to use both hands while attaching the device to a car mount - so 3rd party accessories are no-go.
I ordered an original T959 Vibrant car mount for my international i9000: http://www.daydeal.com/product.php?productid=48828&cat=5138
They ship nearly worldwide. It's 10 days ago and I am still waiting for its arrival.
You guys should do the DIY one from this thread, I did it and it is amazing, it looks so good, and holds the phone really nice.
http://forum.xda-developers.com/showthread.php?t=837841&page=2
Dirt cheap too, for a custom mount the whole thing cost me maybe 10 bucks at the most, including the epoxy.
stepsch said:
I don't want to use both hands while attaching the device to a car mount - so 3rd party accessories are no-go.
I ordered an original T959 Vibrant car mount for my international i9000: http://www.daydeal.com/product.php?productid=48828&cat=5138
They ship nearly worldwide. It's 10 days ago and I am still waiting for its arrival.
Click to expand...
Click to collapse
So did you get your mount yet? Does the Vibrant mount work (properly) with the i9000?
Hi,
the first order was lost, so they sent another one, which arrived in 5 days or something like that.
Yes, it works as designed.
Snap it in, push the USB to the phone (the small box at one end of the mount) with one finger, that's it.
The phone detects immediately that it is a car mount and if you have installed the car app it starts also without delay.
stepsch said:
Hi,
the first order was lost, so they sent another one, which arrived in 5 days or something like that.
Yes, it works as designed.
Snap it in, push the USB to the phone (the small box at one end of the mount) with one finger, that's it.
The phone detects immediately that it is a car mount and if you have installed the car app it starts also without delay.
Click to expand...
Click to collapse
Same thing here with desk dock (original as far as I can say) bought in Poland on Ebay-ish website. Samsung's app downloaded from xda (it's here around somewhere) jumps in the moment I connect the phone. Have problems with line-out though, but I'm on custom ROM so maybe that's the problem.
Nevertheless it really looks like S is making monkeys out of us.
Nirvana388 said:
You guys should do the DIY one from this thread, I did it and it is amazing, it looks so good, and holds the phone really nice.
http://forum.xda-developers.com/showthread.php?t=837841&page=2
Dirt cheap too, for a custom mount the whole thing cost me maybe 10 bucks at the most, including the epoxy.
Click to expand...
Click to collapse
Very nice car kit indeed.
Looking for a car kit too....
I know there's a one x dock that's supposed to hit the market, and I'm assuming/hoping we'll get the same treatment, but how about aftermarket accessories? Anyone have any tips on very good generic car docks?
In very short: Buy this USB Cable, you can find here.
Buy any cardock else, that suits your needs, e.g. igrip HRX kit which you can find here.
You'll have a solution as with HTC's original equipment but of more value, as the holder can be reused..
I bought the original HTC One S Car upgrade kit CAR D100 for about 50 € and am using it for nearly three weeks now. I wouldn't do that again for some reasons. Atm I'm preparing a little review of it, which I'll post here in this thread. Due to a lack of time it will take two or three more days.
I have noticed that the official extra battery kit is out of stock everywhere.
The only alternative is the anker one off amazon for £20 (two batteries and a charger), however apparently their batteries don't fit properly (thicker?) and don't last as long either.
Also, the charger they bundle with is looks like the same one/similar design to the one I had on the Note 2. It's rubbish
Anybody managed to get their hands on the official kit?
So, Phonearena has a few articles on how you can get wireless charging on the S4 now, but they involve a third-party wireless receiver (read: back cover) that looks like it adds a considerable amount of thickness to the phone -- far too much to fit into a case not designed for it. The receiver also won't be shipping for another 3-4 weeks. They've also released a charging pad (which doubles as a dock), but it looks goofy and just uses the Qi standard anyway, so there are plenty of options out there for that portion of the charging.
My question is: Are there other available receivers that actually work? eBay (and the like) displays a list of Galaxy S4 receivers (basically a little flat mat that sits on top of the battery and connects to the Qi hubs inside the back cover), but I'm extremely iffy on ordering any electronics from China unless they're proven...and all of the receivers listed are from mainland China. Has anyone given one of them a shot? And if so, are there any that work efficiently and don't cause problems?
I know, for the future, that Samsung has said they will have a wireless hub (mat) and receiver out sometime soon...but they said the same thing about the Galaxy S3, and it was never released. I trust the word of Samsung about as much as I trust the word of the IRS right now.
Anyone with experiences??
I feel the same way about china electronics, but I do have a Metrans brand one on the way I'm thinking sometime this week, I also go in on the indiegogo Monsterwatts receiver which probably wont show up till June.
so far all the info that I've read up in these forums about the receivers is that with just the Receiver the NFC does not work after installation, one guy used a note 2 NFC antenna to get it working. This sounds like too much fumbling to me and I prefer a sounder solution.
the official receiver covers are starting to show up in both white and black colors (black just recently) they cost 50 bucks and as you mentioned add considerable thickness. the cost doesn't bother me as much as the added thickness, which is what's holding me back from buying it.
The route I'm going to take for the time being is to try the receivers, if it works and does not add any bulge to the rear of the phone while disabling NFC, I could live with that.
maybe if they come out with a decent case for the official receiver cover I might get it.
I don't really use NFC anyway (who does), so that's an acceptable option for me. I have two people at work that I actually *would* use NFC stuff with, and we can just send files to each other without it anyway. Since Verizon has been so gracious as to make sure none of the devices on its network (outside of Nexus devices) can use Google Wallet, I really have no other reason to use NFC.
http://forum.xda-developers.com/showthread.php?t=2296301
Need to read thru his post. Yes, while the receiver is from china, the NFC is functional.
I ordered one from the UK and got it shipped to the US. Am I worried its from china? Not really its 20-30 bucks. It would be the last time I lose that amount.
I will agree that eBay has a lot of knock offs but its the chance you take.
I would like to see a Samsung product out as well, but this will have to do until they put something out.
The main reason Im trying it is because Im tired of looking for a desktop charger that I can use the S4 with while its in a case.
Good luck to ya!
that dude's thread confuses me, he shows some youtube video about a Sview case and how it doesn't close flush with the receiver and says you need to press it hard be careful not to crack your screen... after that he lost me.
I just want a thin receiver that I can slip in the rear without the bulge and closing issues, even if NFC is a NO-GO that's fine with me haha.
I purchased this http://www.ebay.com/itm/121111622748?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
The item does work fine, does NFC work I don't know as I never use it but I will try and find out in the near future.
Item was received quickly and "worked" out of the box but the phone would slide off of the touchstone fairly quick, I had modded multiple phones to work with touchstones including my galaxy nexus so I gad these laying around http://www.kjmagnetics.com/proddetail.asp?prod=D401-N52&cat=168
some N52 magnets, and after checking polarities and moving everything around it now works great and holds the phone very securely.
Charge rate looks to be about 800mA peaking at 615mA incoming charge while the phone is on, Average draw while off the charger is about 200mA with same apps running so about 800mA I do not know what it should be giving out but this is more than enough to charge.
Thought people would like to hear about this and am willing to help if necessary.
nice but I am already invested in QI charging pads.
I think that's the trend anyway, I'm surprised there are still an ample supply of touchstone chargers and palm pre back plates still in the market.
galaxy808 said:
nice but I am already invested in QI charging pads.
I think that's the trend anyway, I'm surprised there are still an ample supply of touchstone chargers and palm pre back plates still in the market.
Click to expand...
Click to collapse
They are being supplied by third parties lately. I try and get the originals only though..
I also had a Qi Nexus 4 but I missed the magnetic pull of the pre I had and the galaxy nexus I modded so I did this.
And I can get a proclip for my car and these make amazing car chargers, which is the main reason I purchased the touchstone version.
SoM3_Idi0t said:
http://forum.xda-developers.com/showthread.php?t=2296301
Click to expand...
Click to collapse
That link + this link
http://forum.xda-developers.com/showthread.php?t=2256339
= no need to create a new thread asking the same question!
KryptosXLayer2 said:
That link + this link
http://forum.xda-developers.com/showthread.php?t=2256339
= no need to create a new thread asking the same question!
Click to expand...
Click to collapse
I wouldn't have created a thread if either of those had helped :good:
The first thread is fairly useful...but is very hard to understand. Also, that solution is pretty much only available overseas for some time. My thread is about using this functionality in North America...which is a totally different story. It's possible to order his solution, but it would cost in the neighborhood of like $75 for the receiver alone...much more than any other available solution.
This thread about looking at options and figuring out what they are.
hotleadsingerguy said:
I wouldn't have created a thread if either of those had helped :good:
The first thread is fairly useful...but is very hard to understand. Also, that solution is pretty much only available overseas for some time. My thread is about using this functionality in North America...which is a totally different story. It's possible to order his solution, but it would cost in the neighborhood of like $75 for the receiver alone...much more than any other available solution.
This thread about looking at options and figuring out what they are.
Click to expand...
Click to collapse
I got the cheapest possible solution I could find on eBay and/or other Chinese sites like AliExpress.
The charger, including a 5V 1.5A wall charger cost me just under $30 ad I got the the Qi receiver for $23. Both prices including S&H from China. It took less than two weeks before I received those items. The reason why I choose this solution was because I wanted to keep the S4 as slim as possible, and also be able to use the flip cover. To get it cheap is also a bonus.
The charge rate is at 640ma, and the bulge the Qi receiver is making is not visible. I removed the thin plastic film from the backside of the receiver and shaved off as much plastic from the inside of the plastic cover as I dared. There was a small visible bulge before those small modification. After the modification one can still "sense" the Qi receiver, but it is not visible or make the phone wobbly when lying on its back.
The only downside beside the rather low charging rate from this kit is the poor quality of the wall charger. It gets very hot and the solution should have been replaced with a micro USB port on the charging pad to make it more versatile when it comes to replacing wall chargers. The pad is also made too glossy and has an annoying sound when the charging initiate and a continuos overly bright status light. I removed the internal speaker and also dimmed the light with some standard paper. The kit can be modified with other housing solutions, and I was thinking of maybe install it inside a small paper-book or something that is a more "standard" item on a nightstand I will just have to check how hot the charging plate and/or the S4 gets before I try out any mods like that.
My recommendation is; Get an iQ charging receiver on eBay. The one I got is OK, but I might have chosen the oddly shaped Qi receiver after the reviews I have read. There is also rumours about a v2 of this slimmest receiver available. Probably wise to sit on the fence a bit longer. I would also advise to stay clear of those cheapest T-100 kind of charging pads that you can find everywhere for $25-$40. I would rather get the Nokia DT-910 or the genuine Samsung charging pad (are there two different kinds of those; one with a micro USB input and another with a standard charging plug?) In Norway both those chargers costs around 40-45 British pounds
Here is a few pics of my kit:
The other threads do not claim that they are UK/EU based.
Lots of usefull information in both. Bubbles post was to verify that the NFC works with the receiver he got.
You should probably do some research on your own.
and BTW, the cost to have just the reciever is £16.99. which is 25$ US.
http://lmgtfy.com/?q=£16.99+to+US+Dollar
Your post is a dupe. Sorry. It just is.