I was given a device (Samsung Galaxy Tab 8.9 SGH-I957) that powers on but wouldnt unlock (you can slide the unlocker to the unlock/google/camera but the screen would just pause and do nothing and return to normal.
I downloaded the samsung drivers. Installed Clockwork Mod Recovery recovery via Odin and put a ROM on it called DarkHoney (after it failed to successfully install the Stock ROM and one called Omni 5.1.1).
After i installed DarkHoney it reboot but didnt boot up. When i plug it into my computer it shows up in my device manager as
Code:
RELINK HS-USB QDLoader 9008 (COM11)
I am not sure what to do. I tried reinstalling the Clockwork Mod Recovery through Odin (which does detect it on COM11) but ODIN just says
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWMR5x_i957_recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
and gets stuck infinitely at that stage.
The screen is black but i know it must be getting power because its showing up as this weird COM port on my PC. It wont respond to button presses, i can't get it into recovery or download mode.
what do I do? I just want to get this thing up and running with any version of android. It seems that Odin still shows a yellow light even though it shows up as this RELINK device, is it possible to fix?
anyone please help?
Related
Total Brick after installing MIUI and loosing root & Recovery and flashed to stock
Hi everybody. I hope to catch attention from all Developpers who can and are willing to help.
Here's my situation.
I'm a Rogers Wireless customer with a Samsung Infuse 4G Rooted and running Infused ROM
I Flashed this morning the infuse to the Latest MIUI ROM, everything went fine but I didn't like the ROM so I tried to revert back to the Infused ROM.
What was my surprise when I've discovered that I've lost the Recovery mode as well as I've lost Root Permission....
Then I've tried to flash back to the stock ROM using the "Ultimate Unbrick"
Everything was ok as I know Odin really well. So I've put the files where they should in Odin and Started the process.
The loading bar was stuck for several minutes and finally I reallised it was frozen.
I've Rebooted the phone then I've realised It wasn't even booting a little bit...
Total Black screen and lights off.
The only thing working is the Download mode
But any Odin Manipulation I try seem to fail....
sometime it say:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_UCKD5.tar.md5 is valid.
<OSM> PHONE_UCKD5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
Sometime it go a little further but never go further than the fist bar of the loading on the phone.
Is someone having any Idea? Please Help :-(
Teranox said:
Hi everybody. I hope to catch attention from all Developpers who can and are willing to help.
Here's my situation.
I'm a Rogers Wireless customer with a Samsung Infuse 4G Rooted and running Infused ROM
I Flashed this morning the infuse to the Latest MIUI ROM, everything went fine but I didn't like the ROM so I tried to revert back to the Infused ROM.
What was my surprise when I've discovered that I've lost the Recovery mode as well as I've lost Root Permission....
Then I've tried to flash back to the stock ROM using the "Ultimate Unbrick"
Everything was ok as I know Odin really well. So I've put the files where they should in Odin and Started the process.
The loading bar was stuck for several minutes and finally I reallised it was frozen.
I've Rebooted the phone then I've realised It wasn't even booting a little bit...
Total Black screen and lights off.
The only thing working is the Download mode
But any Odin Manipulation I try seem to fail....
sometime it say:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_UCKD5.tar.md5 is valid.
<OSM> PHONE_UCKD5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
Sometime it go a little further but never go further than the fist bar of the loading on the phone.
Is someone having any Idea? Please Help :-(
Click to expand...
Click to collapse
When I said sometime it get further, this is the longest it can go
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_UCKD5.tar.md5 is valid.
<OSM> PHONE_UCKD5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> factoryfs.rfs
From there it stay forever on a loading bar on the phone that never progress
wrong section sorry but it is
This thread will be moved shortly anyway, but I'll say your NAND could be going or corrupted. Was it giving you any kind of problem before? Lots of FC's, things not working right at all....
You didn't actually lose recovery or root. To get to recovery hold the power button and then hit reboot. Then the option to enter recovery will show up. You still have root but you need to activate it by going to Supwruser in the tools folder.
Sent from my SGH-I997 using XDA App
Change USB ports...this hapend to me. And make sure that the "f.reset" is unticked....only the center option should be ticked...I'm not on my PC but I remember it being something along those lines.
Sent from my SAMSUNG-SGH-I997 using xda premium
Still Nothing
I've tried Changing USB Port
Tried with 3 Computer
Phone was fine before
I Lost Root...REALLY, Superuser was turned on (even tried off/on to be sure)
Apps that require Root was not working failed to get root
Recovery Mode was not there...I Mean the button was there but it was freezing when I tried to access it. It was only able to boot normaly. Even the 3 button recovery was missing...
Now it's a total brick...only thing that work is the download Mode but I can't flash anything...
I was wondering if the "Ultimate Unbrick" was the problem...not in itself but i'm a Rogers Customer with a Rogers Version so maybe the "Ultimate Unbrick" is only made for AT&T....
Think there is a different version for at&t and rogers
Sent from my SAMSUNG-SGH-I997
crash822 said:
Think there is a different version for at&t and rogers
Sent from my SAMSUNG-SGH-I997
Click to expand...
Click to collapse
Never saw a Rogers Version. Anyone can point it me out if so?
I'm Making Progress!!! (but still not booting)
Using this Package made specificly for Rogers Samsung Infuse 4G,
I Flashed the phone. It loader almost everything but the kernel....
So when it was loading the Kernel I Closed Odin and Rebooted the phone
(I know this is not recommended)
Now I got something Saying:
"Firmware Upgrade encoutered an issue.
Please select Recovery mode in Kies & try Again"
And I got an image of a phone and computer screen with a "!" sign in a yellow triangle in between
Thing I'm trying right now is to flash PDA_Infused_Gingerbread_Kernel_v1.tar.md5
separatly in odin. It's taking forever to load but it is loading (almost 45-50 minutes since i've started this attempt.
I'm gonna let it go no mather how long it take and i'll let you know as soon as it's done.
By the way, in Kies, when I wanted to try Emergency Recovery it said in a Popup screen:
"Please enter the recovery code from the previous PC
to run emergency recovery"
Is someone know what this mean and what is this recovery code and from witch previous pc it's talking about (never installed Kies on that PC and this phone never been connected to a kies enabled PC...
Phone is now working!!!!!!
My ROGERS infuse is now Back online...
So to resume
I've Flashed this package:
http://forum.xda-developers.com/showthread.php?t=1193927
First time it stuck at kernel...
Attempted to Flash separately an alternate Kernel:
PDA_Infused_Gingerbread_Kernel_v1.tar.md5 (It's the Infused Kernel)
Infused Kernel Failed to instal,
Then I've installed ADB all all the packages....
Then with Odin in XP compatibility (I have Win7 pro 64) I Flashed
The first package
(http://forum.xda-developers.com/showthread.php?t=1193927)
That Time It went throught 100%
Phone Rebooted and i'm on the Stock Rogers ROM...
Now let's infuse this thing one more time ;-)
It took me 48 hours but I hope This post will help someone one day...
Don't forget it's for a SAMSUNG INFUSE 4G FROM ROGERS
I had the same exact problem as you, except it was with my AT&T Infuse.
My solution was to just keep trying to Odin to stock with GTG's Ultimate Unbrick. It kept freezing when I tried flashing. After unplugging/replugging the phone to my PC/Laptop with a few combinations I eventually got it to stop freezing and get all the way through the flashing process.
So I was trying to root my phone and put CWM on it, but it's stuck on the samsun boot logo.
History:
Used SuperOneClick 2.3.1 and had root on my phone.
Followed the steps to copy the 3e recovery with no sig check on internal SD card.
Renamed old recovery to recovery.back.
Pasted 3e no sig check into directory and changed the attribs to match old recovery.
Rebooted phone and now it's stuck on the Samsung Logo.
Tried to boot up in recovery mode using the 3 button method, the Samsung logo keeps resetting. Tried many different times with no luck.
Downloaded GTG's Ultimate unlock but it's always stuck at this part:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_UCKD5.tar.md5 is valid.
<OSM> PHONE_UCKD5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
Even made a usb jib, with an old cable and 300K ohm resistors, with no luck.
What else can I do to try to get this phone back up?
So, I've managed to get my phone on downloading mode using the jig. It's not getting detected by ODIN (device manage shows Unknown device).
What can I do now
Edit: so I got on a winXP pc and got it working.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
So I was trying to wipe my tablet in order sell it. It had Cyanogenmod 9.0 on it. After I factory wiped, it was stuck in a boot loop. Wouldn't get past the Cyanogenmod boot screen before it rebooted.
So I tried going into CWM recovery and reflashing Cyanogenmod. Once I did that, it now boots up onto the "Firmware upgrade encountered an issue" screen and won't go to anything else.
If I try to put it into either recovery or download, it just turns off then goes back to the same screen. I've tried to use Kies to restore it and nothing. Tried Odin and this comes up
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3113_CWM_RECOVERY-6.0.1.1_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)"
I have no idea what to do past this. Any help would be greatly appreciated.
Tab 2 firmware upgrade encountered an issue a solution
Zargari said:
So I was trying to wipe my tablet in order sell it. It had Cyanogenmod 9.0 on it. After I factory wiped, it was stuck in a boot loop. Wouldn't get past the Cyanogenmod boot screen before it rebooted.
So I tried going into CWM recovery and reflashing Cyanogenmod. Once I did that, it now boots up onto the "Firmware upgrade encountered an issue" screen and won't go to anything else.
If I try to put it into either recovery or download, it just turns off then goes back to the same screen. I've tried to use Kies to restore it and nothing. Tried Odin and this comes up
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3113_CWM_RECOVERY-6.0.1.1_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)"
I have no idea what to do past this. Any help would be greatly appreciated.
Click to expand...
Click to collapse
I had the same problem, kies didn't work, neither did odin. I used every fix suggestion I could find.
It finally dawned on me that the battery was holding everything in place. I took off the back of my Tab 2 and removed
the battery. I re-installed the battery after 10 minutes and was able to re install a stock rom. I hope thishelps.
Please help if you can
I have a UK Galaxy Note 10.1 16GB WIFI model no GT-N8010 running a rooted version of 4.1.2 build no JZ054K.N8010XXUCMA5.
I want to unroot my device as there is an official firmware update available and it wont install due to the device being rooted.
I have downloaded a stock version of 4.1.2 from sammobile (N8010XXUCMG1_N8010OXXCMG1) and i have tried to use Odin 3.0.7 after putting my device into Odin Mode (holding down the volume button while turning on the power then hitting volume up to cotinue). After a while Odin recognises that my devise it plugged in and when i hit start i get the following messages from Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XXUCMG1_N8010OXXCMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't understand what is happening or if i am doing something wrong.
Please help
Thanks
UPDATE..........
I have tried to install the update through Kies and now when I connect my tablet I get an error message saying my device has malfunctioned and Windows no longer recognises my device. This is soooooooooo frustrating can someone, anyone please help me out
rkidcd911x said:
Please help if you can
I have a UK Galaxy Note 10.1 16GB WIFI model no GT-N8010 running a rooted version of 4.1.2 build no JZ054K.N8010XXUCMA5.
I want to unroot my device as there is an official firmware update available and it wont install due to the device being rooted.
I have downloaded a stock version of 4.1.2 from sammobile (N8010XXUCMG1_N8010OXXCMG1) and i have tried to use Odin 3.0.7 after putting my device into Odin Mode (holding down the volume button while turning on the power then hitting volume up to cotinue). After a while Odin recognises that my devise it plugged in and when i hit start i get the following messages from Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XXUCMG1_N8010OXXCMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't understand what is happening or if i am doing something wrong.
Please help
Thanks
UPDATE..........
I have tried to install the update through Kies and now when I connect my tablet I get an error message saying my device has malfunctioned and Windows no longer recognises my device. This is soooooooooo frustrating can someone, anyone please help me out
Click to expand...
Click to collapse
Are you using the original, official usb cable by Samsung that is plugged directly into your windows computer, no extension cable?
kkretch said:
Are you using the original, official usb cable by Samsung that is plugged directly into your windows computer, no extension cable?
Click to expand...
Click to collapse
yes its the one that came in the box
rkidcd911x said:
yes its the one that came in the box[/QUOTE
Does Odin happen to see that you are connected?
If so........ You could download the stock firmware again and try to flash again.
Click to expand...
Click to collapse
I've had that issue before but with a different droid. I'd try a different version of Odin, version1.85 seems popular for our device. I'm like 95% sure this is your fix
If that fails, try a different USB port.
Good luck!
Custom recovery installed?
Sent from my SCH-I605
rkidcd911x said:
Please help if you can
I have a UK Galaxy Note 10.1 16GB WIFI model no GT-N8010 running a rooted version of 4.1.2 build no JZ054K.N8010XXUCMA5.
I want to unroot my device as there is an official firmware update available and it wont install due to the device being rooted.
I have downloaded a stock version of 4.1.2 from sammobile (N8010XXUCMG1_N8010OXXCMG1) and i have tried to use Odin 3.0.7 after putting my device into Odin Mode (holding down the volume button while turning on the power then hitting volume up to cotinue). After a while Odin recognises that my devise it plugged in and when i hit start i get the following messages from Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XXUCMG1_N8010OXXCMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't understand what is happening or if i am doing something wrong.
Please help
Thanks
UPDATE..........
I have tried to install the update through Kies and now when I connect my tablet I get an error message saying my device has malfunctioned and Windows no longer recognises my device. This is soooooooooo frustrating can someone, anyone please help me out
Click to expand...
Click to collapse
you also have to reset the binary counter. there is an app in the play store called Triangle Away.
1. Have the device rooted and Triangle Away installed w/ su permission.
2. Run Triangle Away to reset the binary counter.
3.Power down the device.
4. re-install the stock firmware through Odin.
Samsung SGH-T779 (Galaxy Tab 2 T-Mobile)
Hey team, I've spent several hours trying to work through what's going on with this Galaxy Tab 2 which my Dad wanted to give to my son.
Here's the status of the tablet. It hasn't been regularly used for years. When plugged in you get mostly non-responsiveness. BUT, after charging it for a few days, you can unplug it and then it will allow you to try Odin mode (power + volume down) and it FAILS to try recovery mode (holding power + volume up).
Firstly, when it tries to go into recovery mode, the top left blue wording appears "booting recovery" and then regardless of how long or I continue to hold vs. releasing the power button and up volume, it goes black and then goes into a kind of boot loop where it'll flash a stagnant "SAMSUNG" logo, then go dark and freeze on a kind of "glowing" but not changing SAMSUNG logo. I can press the power button and it'll go off, and then boot up to the two SAMSUNG logos again, but stays frozen there indefinitely.
Unable to factory reset from recovery mode, I've gotten the tablet into Odin Mode. I have used https://forum.xda-developers.com/t/...-versions-samsung-rom-flashing-tools.2189539/ for my guide to which Odin version (primarily 1.85, but I've tried 3.04, 3.06, 3.07 just to see if they worked better.) I've used this guide to help with the logistics of flashing the stock firmware: https://forum.xda-developers.com/t/guide-odin-flash-guide.1671969/
The TAR files I'm using are from https://samfw.com/firmware/SGH-T779/TMB/T779UVTMF4 and show the following file names.
BOOTLOADER_T779UVTMF4_1255797_REV00_user_low_ship.tar.md5
CSC_TMB_T779TMBMF4_1255797_REV00_user_low_ship.tar.md5
MODEM_T779UVTMF4_1255797_REV00_user_low_ship.tar.md5
PLATFORM_T779UVTMF4_1255797_REV00_user_low_ship.tar.md5
I've been plugging the Platform file into the PDA slot, since there's not a PDA/Code in the file packet. I get the following message thread when running:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_T779UVTMF4_1255797_REV00_user_low_ship.tar.md5 is valid.
<OSM> PLATFORM_T779UVTMF4_1255797_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_T779UVTMF4_1255797_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_TMB_T779TMBMF4_1255797_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've also tried the file here: https://a2zrom.com/samsung-sgh-t779-firmware which only has one file named:
T779UVTMF4_T779TMBTMF4_T779UVTMF4_HOME.tar.md5
I plugged this into the PDA slot and the result was the following message thread:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T779UVTMF4_T779TMBTMF4_T779UVTMF4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any direction here would be tremendously appreciated!
The only other information I can offer is that occasionally I HAVE had the SAMSUNG logo loop stall out at a greyed out horizontal battery symbol with a greyed out circle of "sun rays" before it goes black for good.
Any assistance would be greatly appreciated!
Thanks XDA wizards.
aamccarty
Same situation here. I think i will smash it with a hammer
Stay tuned, maybe we'll figure it out together.
First, don't use win 10 or 11, use win7 or Linux for flashing!!!! Than try again...
Maybe its EMMC bug aka flash chip is dead. But you can try flashing ROM with pit file for your model (don't use any others).