Well, this is the fruits of my labor last night. Took the KG2 ODIN tarball and ran it through the dsixda rom kitchen.
Features that I have added(Haha, funny, huh?):
- Deodexed(Useable as a base for a custom rom)
- Rooted(Used Superuser like every other rooted rom)
- Updated busybox
That's about it...really. I don't need to add screenshots since everyone should know what stock looks like.
Only thing I need to really mention, is if you're using this on Orange CWM...CHECK CHECK CHECK your mounts.(In other words, make certain the mounts are correct)
Follow these instructions as per which CWM you're using. And if on the Voodoo(Red) CWM...disable voodoo or you WILL get a bootloop.
I'm not responsible if your phone is unrecoverable. You voluntarily flashed this yourself and are solely to blame if anything goes wrong. I did not hold a gun to your head and force you to download and flash this package, so don't expect me to replace your phone. Also, any bugs present aren't my fault. Blame Samsung. It is stock after all.
- Put zip file in your /sdcard
- Reboot into cwm recovery
- Wipe Data/Factory Reset
- Wipe Cache Partition
(Optional but recommended to prevent any minor issues)-Wipe Dalvik Cache from advanced menu in CWM
*Now before you Flash, Only if you are on the orange CWM, (Not RED voodoo CWM from Bali) if on red CWM ignore the mounts/unmount part*
MAKE SURE YOUR MOUNTS LOOK LIKE THIS: (Go to mounts and storage from CWM recovery)
UNMOUNT CACHE
MOUNT DATA
MOUNT SDCARD
UNMOUNT SYSTEM - this is the ONLY mount you pay mind to, not Sdcard or anything else
- Now its safe to Flash the .zip
(AGAIN IGNORE UNLESS IF YOU ARE ON A RED VOODOO RECOVERY) after you flash, go back to mounts and storage and make sure your mounts look like this
UNMOUNT CACHE
MOUNT DATA
UNMOUNT SDCARD
UNMOUNT SYSTEM
(Optional but recommended)-Wipe Cache then Wipe Dalvik Cache from advanced menu in CWM before Rebooting.
(To First Time installers, System Needs to be set to Unmount, though it would really be mounted. If you do Not do this you will have a softbrick and will have to ODIN to stock and start all over ....) Once you have Flashed a Custom ROM or Bali 2.2 Kernel you dont have to worry about mounts
Irregardless of what the above says, it's best to worry about mounts anyways. And if it results in a bootloop after flashing this, boot into recovery(should give you the stock blue recovery[uses stock Kernel after all]) and clear all user data. It should boot right up after that.
Download: KG2-DEO-ROOTED.zip
SammaelAkuma said:
Well, this is the fruits of my labor last night. Took the KG2 ODIN tarball and ran it through the dsixda rom kitchen.
Features that I have added(Haha, funny, huh?):
- Deodexed(Useable as a base for a custom rom)
- Rooted(Used Superuser like every other rooted rom)
- Updated busybox
That's about it...really. I don't need to add screenshots since everyone should know what stock looks like.
Only thing I need to really mention, is if you're using this on Orange CWM...CHECK CHECK CHECK your mounts.(In other words, make certain the mounts are correct)
Follow these instructions as per which CWM you're using. And if on the Voodoo(Red) CWM...disable voodoo or you WILL get a bootloop.
I'm not responsible if your phone is unrecoverable. You voluntarily flashed this yourself and are solely to blame if anything goes wrong. I did not hold a gun to your head and force you to download and flash this package, so don't expect me to replace your phone. Also, any bugs present aren't my fault. Blame Samsung. It is stock after all.
- Put zip file in your /sdcard
- Reboot into cwm recovery
- Wipe Data/Factory Reset
- Wipe Cache Partition
(Optional but recommended to prevent any minor issues)-Wipe Dalvik Cache from advanced menu in CWM
*Now before you Flash, Only if you are on the orange CWM, (Not RED voodoo CWM from Bali) if on red CWM ignore the mounts/unmount part*
MAKE SURE YOUR MOUNTS LOOK LIKE THIS: (Go to mounts and storage from CWM recovery)
UNMOUNT CACHE
MOUNT DATA
MOUNT SDCARD
UNMOUNT SYSTEM - this is the ONLY mount you pay mind to, not Sdcard or anything else
- Now its safe to Flash the .zip
(AGAIN IGNORE UNLESS IF YOU ARE ON A RED VOODOO RECOVERY) after you flash, go back to mounts and storage and make sure your mounts look like this
UNMOUNT CACHE
MOUNT DATA
UNMOUNT SDCARD
UNMOUNT SYSTEM
(Optional but recommended)-Wipe Cache then Wipe Dalvik Cache from advanced menu in CWM before Rebooting.
(To First Time installers, System Needs to be set to Unmount, though it would really be mounted. If you do Not do this you will have a softbrick and will have to ODIN to stock and start all over ....) Once you have Flashed a Custom ROM or Bali 2.2 Kernel you dont have to worry about mounts
Irregardless of what the above says, it's best to worry about mounts anyways. And if it results in a bootloop after flashing this, boot into recovery(should give you the stock blue recovery[uses stock Kernel after all]) and clear all user data. It should boot right up after that.
Download: KG2-DEO-ROOTED.zip
Click to expand...
Click to collapse
Cool base.
Sent from my SGH-T999 using Tapatalk 2
I'll download this and maybe use it for my DangerZone rom. BTW, does flash work within the web browser?
ASDF.
Forgot to add the modified recovery file. So to anyone who uses this as a rom base or as a regular rom between 12/23/12 and whenever I update it...grab the /system/bin/recovery from any other custom rom and either adb push it to /system/bin or use a root file manager to paste it over the current on and reset the permissions to 775(I think)[Just check what it is before you use the second method]
And as far as I know, Flash should work. I haven't had any issues, personally.
Sent from my SGH-T839 using Tapatalk 2
Do you also need to do this before flashing a new kernel via CWM? Or is this only needed when you flash a new rom? And another question: what is the fastest and most stable kernel for Gingerbread Galaxy S Plus Stock Rom? And if I do everything like the guide, is there no risk? Thanks in advance:
Do this every time before flashing a stock- or custom-rom!
Attention!
You will delete everything on your phone! Your phone will not even be able to boot! Only Clockworkmod and the Download-Mode will be left! (Your SIM-Card will be untouched)
Please make sure that you saved only your backups on another device before formatting your phone (like on your computer)
This is the best method for using the full experience of every custom rom! I recommend this method because in the past a lot of users had issues with custom roms. They had installed a lot of different custom roms before and they didn´t format their phone correctly before flashing the new rom. This caused a lot of problems
Enter in the Clockworkmod
Choose "advanced"
Choose "Wipe Dalvik Cache"
Go back to the main-menu by pressing the back button
Choose “Mounts and storage”
Select all after all
Format /system
Format /cache
Format /data
(Format /emmc)
(Format /sdcard)
Formating "emmc" and "sdcard" is not a duty! You will need it if you installed a mod on your internal or in your external card
UltimAOSP
If you choose to use these, you are doing that on your own risk, and I can not be held responsible for any damage you made to your phone.
UltimAOSP is a port rom from H9001
INSTALL INSTRUCTION:
To flash a new ROM properly, you need a custom recovery (CWM for example)
1. Reboot to recovery.
2. Do a nandroid backup or backup in cwm.
3. mount USB Mass Storage and delete from sdcard these three directories:
.android_secure
Android
LOSTDIR4. Copy ROM zip or zips on sdcard
5. Eject mass storage from computer and then unmount in recovery
6. wipe all/factory reset or pre-flash wipe in recovery
7. wipe or erase dalvik cache
8. flash zip from sdcard, choose ROM zip, flash it and reboot.
That's all, this is the correct way to flash any new ROM in any phone thru recovery.
Click to expand...
Click to collapse
Rooted : Yes
Languages : All
reserved
Mirror Links
* UltimAOSP v1.1.0
Thank you for this rom :good:
I will try it. Are there gapps?
Think about posting it to needrom.com
iOS 8 ROM for
KARBONN TITANIUM OCTANE
Having my weapons fully enabled....
I am back with a new ROM ported by me for Karbonn Titanium Octane.As the name suggest,
it is having iOS ui and there is no need to say anything in support.It's a must have thing.
Let's make it iOS!!!!!!!!
Features:- SINGLE SIM ONLY
- 95% Iphone 5 UI and Framework
- Rooted
- Powered by Viper4AndroidFx
- Built in Xposed
- Built in Gravitybox
- Built in Ayfone Gece Modu
- Smooth Interface
- IOS8 Ringtone and Notification sounds
BUGS:
No bugs faced yet
DISCLAIMER:
Your warranty will be void.
Flash it on your own risk,
I am not responsible for the steps to brick a device which I have not explained
Download:Available here
INSTALLATION:
Using Philz Recovery http://forum.xda-developers.com/android/general/philz-recovery-karbonn-titanium-octane-t3283685
1)Save ROM in your external sd card cause your internal is gonna get wiped up!!
2)First,in Wipe And Format Options, Select Wipe Cache and then Factory Reset
3)Then selectClean to Install a New ROM
4)Then select Custom Format Options
5)Under this,do format /system ,format /cache and format /data
6)Then go back and select Mounts and sorage
7)Under this Mount everything except mount USB Storage
8)Go back and Select Install Zip ,then Choose zip from /storage/sdcard1 (which is
your external storage where ROM should be placed) and then select ROM file.
CREDITS:Obaid Muneer and Cybergeek for source
rajansaini95,me
I want to ask u something does it supports gapps or not???? Play services kaam krti h kya????
EMUI v3 ROM for
KARBONN TITANIUM OCTANE
ABOUT:
Presenting you a yet another exciting android based interface developed by Huawei.
EMUIstands for "EMOTION UI".So,its third ROM ported and made ready by me for Karbonn Titanium Octane users.
FEATURES:1. Theme engine
2.landscape mode of music player
3.very fast and smooth performance
4.One hand UI
5.see screenshots for more features
6.and much more to discover
SCREENSHOTS:click to see more screenshots
DISCLAIMER:Prevention is better than cure,so always have backup ready.
No one is responsible for your damage and you unable to pick her call resuling she makes you her "Ex".
Flash it on your own risk.
DOWNLOADS:available here
INSTALLATION:Using Philz Recovery here
1)Save ROM in your external sd card cause your internal is gonna get wiped up!!
2)First,in Wipe And Format Options, Select Wipe Cache and then Factory Reset
3)Then selectClean to Install a New ROM
4)Then select Custom Format Options
5)Under this,do format /system ,format /cache and format /data
6)Then go back and select Mounts and sorage
7)Under this Mount everything except mount USB Storage
8)Go back and Select Install Zip ,then Choose zip from /storage/sdcard1 (which is
your external storage where ROM should be placed) and then select ROM file.
9)After completion reboot your device.
Note: Don't apply root from recovery when it says '"Apply Su".
CREDITS:Huawei for its EMUI
MTK Hacker Pro for guiding to fix camera
Rajan Saini,me for porting to bugless state