Ok, I have a rooted rogers captivate, running froyo, but now want to try a custom rom, but I'm having some issues.
I did install titanium backup, backup my entire system. I also downloaded the clockwork rom manager and did a flash ClockworkMod recovery.
I have gone thru the flashing directions as laid out by David Cogen here
theunlockr.com/2010/08/02/how-to-load-a-custom-rom-on-the-samsung-captivate-vibrant
but can't get past step 7, where you are in recovery mode and choose to select the package. I keep getting the error:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted
I have followed the directions completely, downloaded the zip file, connected my phone to my pc with the samsung keis option that pops up as soon as I connect my usb, transferred the unzipped file from my downloads folder to the sd card on my phone, but not into any folder on the card. then I go and unplug my usb, power down the phone, reboot it into recovery mode, select to reinstall packages, and we're up to that error code.
I have downloaded 3 dif roms, tried it with each, cognition, serendipity, and continuum, each give me the same code.......so what am I doing wrong???? Driving my nuts, been screwing around with this for 2 days, got nothing to show for it.
I have also tried using the mass storage mode, and the debugging mode, to transfer the file, this has given me a different issue. When I attempt to do this, the window opens up, showing me the files on my system, but as soon as I try to drag and drop the rom onto the sd card I get this error code:
error 0x80070057
When i googled this code it keeps coming up with system registry errors, so I downloaded registry mechanic, ran my whole system, cleaned up all registry issues, and tried again, same problem.
Came to work, attempted it from my office pc, win xp, same issue. Also tried it from my chef's laptop, win 7. he also is an android user, and side loads apps to his liquid, we had the same error come up on his.
I'm stumped, I have watched about a dozen different videos showing how to load a custom rom, I can't see anything that I am doing differently than they are. I have read several posting on how to load a custom rom, they all agree with the videos I was watching, and again, nothing I haven't already done.
I have tried everything I can think of, been up half the night burning through google searches, trying to find someone with the same problem, to no avail....So here I am, hoping someone here will see (the probably stupidly obvious) problem, and help me to start enjoying my android to the fullest.....
Thank you
I'm using a rogers captivate. Are you getting the actual clockwork recovery or the stock one (cwm has a different menu with alot more options and is green I think - I'm not too good with colors). If your not getting clockwork, their website has zip files for every phone they support. Download the captivate one, rename it update (keep the zip extension), put it on the internal sd card and flash it and voila CWM recovery. You should be able to flash a rom after that. Or go get the one click odin for 2.1 and install recovery after flashing that (that's what I did)
Edit: if you flash with odin, you will need to root again. But that's pretty easy and custom ROMs for the captivate kick a**
Sent from my SAMSUNG-SGH-I897 running serendipity 5.7 on telus using XDA App
If he's even getting the "can't verify whole signature" error, he's definetly in CWM recovery. I am in the same boat, I have read countless forum threads, how-to's, etc. Always ends the same. The rom goes through, deletes my old ROM/files, starts to install the new one, and gets stuck in one of various errors. Error 78, error 94, etc. Flashed to stock, rooted, tried cleaning caches, bins, etc. Can't figure it out. I never a problem with custom ROM's on 2.1.
BTW, it sounds like you need to just toggle signatures in CWM. Just boot into recovery menu(green one) and find the toggle signatures line. press that line and your phone should say signatures disabled. Then try running that ROM install again. Eithre it'll work or you'll have a different error, but at least you'll be past thsi error. GL
Hi guys,
I've been reading you for a while, but this is actually my first post.
Currently stuck with a "Unfortunately, Launcher has stopped" on my tablet, with no access to any menus except my Settings. The menu bar (back, home and multitasking) is now gone. I've got my keyboard to navigate, but something in the display is also quite wrong, image seems to be zoomed, or set at the wrong resolution. Tried to search on the forum, but all posts found were not about the same rom or the same issue. Sorry if I missed one.
Here's a little background story:
I've rooted my TF300T about a month ago and installed Hydro 4.1. It has been working very well since then, but in the last days, I thought that my tablet felt a little slower than usual, so I started searching if an update to 4.2 was available.
I'm not sure if this is what caused the issue or not, but I went into my "Power button" menu and went into "Recovery" mode (instead of Shutdown, reboot, etc.), which then restarted my unit into TWRP menu.
I then selected the "System" submenu and simply touched "Reboot". (terms might not be exact). At the first reboot, I got the problems that I described.
Can't do much, popup keeps appearing on my screen. I haven't tried yet to clear the cache of my Launcher, which I'm trying to avoid as I would prefer to avoid rearranging 5 pages of icons, but between that and reinstalling everything, obviously I prefer to simply lose my display preferences.
Can anyone help me about what caused my issue, and what can I do now?
Here are 2 screenshots that I took, showing that my bottom menu is missing and that the fonts aren't set right (clock and left icon). Also, my notifications menu now appears near the middle of my screen.
EDIT: I unfortunately cannot post links yet
I remember installing an app (with root access) that gave me a menu about my resolution. One thing that I'm wondering, could it be that the resolution got changed and I simply never rebooted since the change, which now caused my Launcher to crash? How can I launch an app without having access to the app menu?
Thanks in advance for your help.
irepressed said:
Hi guys,
I've been reading you for a while, but this is actually my first post.
Currently stuck with a "Unfortunately, Launcher has stopped" on my tablet, with no access to any menus except my Settings. The menu bar (back, home and multitasking) is now gone. I've got my keyboard to navigate, but something in the display is also quite wrong, image seems to be zoomed, or set at the wrong resolution. Tried to search on the forum, but all posts found were not about the same rom or the same issue. Sorry if I missed one.
Here's a little background story:
I've rooted my TF300T about a month ago and installed Hydro 4.1. It has been working very well since then, but in the last days, I thought that my tablet felt a little slower than usual, so I started searching if an update to 4.2 was available.
I'm not sure if this is what caused the issue or not, but I went into my "Power button" menu and went into "Recovery" mode (instead of Shutdown, reboot, etc.), which then restarted my unit into TWRP menu.
I then selected the "System" submenu and simply touched "Reboot". (terms might not be exact). At the first reboot, I got the problems that I described.
Can't do much, popup keeps appearing on my screen. I haven't tried yet to clear the cache of my Launcher, which I'm trying to avoid as I would prefer to avoid rearranging 5 pages of icons, but between that and reinstalling everything, obviously I prefer to simply lose my display preferences.
Can anyone help me about what caused my issue, and what can I do now?
Here are 2 screenshots that I took, showing that my bottom menu is missing and that the fonts aren't set right (clock and left icon). Also, my notifications menu now appears near the middle of my screen.
EDIT: I unfortunately cannot post links yet
I remember installing an app (with root access) that gave me a menu about my resolution. One thing that I'm wondering, could it be that the resolution got changed and I simply never rebooted since the change, which now caused my Launcher to crash? How can I launch an app without having access to the app menu?
Thanks in advance for your help.
Click to expand...
Click to collapse
What you describe is likely caused by changing the resolution. Are you still running hydro 4.1?
You can likely recover by replacing your build.prop or editing the one you now have. build.props are usualy rom specific so you need one from the rom you are using.
tobdaryl said:
What you describe is likely caused by changing the resolution. Are you still running hydro 4.1?
You can likely recover by replacing your build.prop or editing the one you now have. build.props are usualy rom specific so you need one from the rom you are using.
Click to expand...
Click to collapse
Yes, still using Hydro 4.1. I do have a build.prop editor installed on my tablet, but since I can't launch app, I don't know how to do it.
I'll try to connect the tablet to my PC and see if I can get access to my file from there.
Thanks!
irepressed said:
Yes, still using Hydro 4.1. I do have a build.prop editor installed on my tablet, but since I can't launch app, I don't know how to do it.
I'll try to connect the tablet to my PC and see if I can get access to my file from there.
Thanks!
Click to expand...
Click to collapse
I'm presently downloading 4.1 hydro to retrieve the build.prop. If you unzip it the build.prop is /system/build.prop also located there on your tab. I have another fifteen minutes to download if you wish for me to supply the file!
tobdaryl said:
I'm presently downloading 4.1 hydro to retrieve the build.prop. If you unzip it the build.prop is /system/build.prop also located there on your tab. I have another fifteen minutes to download if you wish for me to supply the file!
Click to expand...
Click to collapse
If you could, I would appreciate it!
Only thing left, how can I send the file to my TF300T without access to my apps? I'm currently trying to cheat by opening my apps using the Share feature with screenshots taken, but so far, no success.
irepressed said:
If you could, I would appreciate it!
Only thing left, how can I send the file to my TF300T without access to my apps? I'm currently trying to cheat by opening my apps using the Share feature with screenshots taken, but so far, no success.
Click to expand...
Click to collapse
We should be able to push with adb, set permissions, and reboot.
---------- Post added at 04:58 PM ---------- Previous post was at 04:36 PM ----------
http://www.mediafire.com/?tk3cifzci0vw24e
place the build.prop from the zip file into the directory with fastboot.
Open terminal or cmd in the directory with fastboot.
Boot into twrp – twrp provides adb access by default.
Use twrp mount menu and check mount system.
Then type
adb push build.prop /system/build.prop
adb shell chmod 644 /system/build.prop
in twrp reboot system
type
adb kill-server
tobdaryl said:
We should be able to push with adb, set permissions, and reboot.
---------- Post added at 04:58 PM ---------- Previous post was at 04:36 PM ----------
place the build.prop from the zip file into the directory with fastboot.
Open terminal or cmd in the directory with fastboot.
Boot into twrp – twrp provides adb access by default.
Use twrp mount menu and check mount system.
Then type
adb push build.prop /system/build.prop
adb shell chmod 644 /system/build.prop
in twrp reboot system
type
adb kill-server
Click to expand...
Click to collapse
Ok, my Fastboot folder is currently at the root of my C drive on my PC
I entered your command and got after the first one "adb server is out of date. killing...
* daemon started successfully *
error: device not found
FYI, before I got your last post, I used Android commander to push the build.prop that I still had on my PC when I installed the custom hydro 4.1 rom.
After my reboot, I got the Asus logo, than a black screen that does nothing.
I then rebooted in Fastboot and followed your instructions.
So now, it seems that my pc doesnt see my tablet anymore when in TWRP. is this normal? Do I need to restart it after checking "Mount system"?
irepressed said:
Ok, my Fastboot folder is currently at the root of my C drive on my PC
I entered your command and got after the first one "adb server is out of date. killing...
* daemon started successfully *
error: device not found
FYI, before I got your last post, I used Android commander to push the build.prop that I still had on my PC when I installed the custom hydro 4.1 rom.
After my reboot, I got the Asus logo, than a black screen that does nothing.
I then rebooted in Fastboot and followed your instructions.
So now, it seems that my pc doesnt see my tablet anymore when in TWRP. is this normal? Do I need to restart it after checking "Mount system"?
Click to expand...
Click to collapse
Ok, I just killed my adb.exe, tried the command again and that got rid of the out of date error.
But, still stuck with the "device not found".
irepressed said:
Ok, my Fastboot folder is currently at the root of my C drive on my PC
I entered your command and got after the first one "adb server is out of date. killing...
* daemon started successfully *
error: device not found
FYI, before I got your last post, I used Android commander to push the build.prop that I still had on my PC when I installed the custom hydro 4.1 rom.
After my reboot, I got the Asus logo, than a black screen that does nothing.
I then rebooted in Fastboot and followed your instructions.
So now, it seems that my pc doesnt see my tablet anymore when in TWRP. is this normal? Do I need to restart it after checking "Mount system"?
Click to expand...
Click to collapse
Slowdown, I'm getting behind. I'm willing to help but you are now worse off than before.
Sit tight for five minutes and I'll try to give you a twrp flashable zip for your build.prop and hope that is the extent of the damage.
If not we'll try to go from there.
http://www.mediafire.com/?ybplc1ws8uvskhf
This is a twrp flashable zip that only replaces your build.prop with the one from hydro 4.1.
tobdaryl said:
Slowdown, I'm getting behind. I'm willing to help but you are now worse off than before.
Sit tight for five minutes and I'll try to give you a twrp flashable zip for your build.prop and hope that is the extent of the damage.
If not we'll try to go from there.
This is a twrp flashable zip that only replaces your build.prop with the one from hydro 4.1.
Click to expand...
Click to collapse
Alright, I'll wait for your answer before trying anything else.
So now, I've got your latest .zip file.
Still can't see my TF300T from my PC, so, ADB is a no go for now.
In fact, I do see it in the Device Manager, but since my last reboot, it now shows an exclamation mark on it as if my drivers weren't good.
Since you mentioned the file is a flashable zip, I'm guessing that I can flash it using TWRP without going through my PC?
Can you give me precise info on that, since I do not want to mess with my system more than I already did.
Thanks
irepressed said:
Alright, I'll wait for your answer before trying anything else.
So now, I've got your latest .zip file.
Still can't see my TF300T from my PC, so, ADB is a no go for now.
In fact, I do see it in the Device Manager, but since my last reboot, it now shows an exclamation mark on it as if my drivers weren't good.
Since you mentioned the file is a flashable zip, I'm guessing that I can flash it using TWRP without going through my PC?
Can you give me precise info on that, since I do not want to mess with my system more than I already did.
Thanks
Click to expand...
Click to collapse
Look at the bottom of my previous post. You will find a new link there. Just flash with twrp and reboot. Don't worry about wiping or any of that, just flash and reboot.
tobdaryl said:
Look at the bottom of my previous post. You will find a new link there. Just flash with twrp and reboot. Don't worry about wiping or any of that, just flash and reboot.
Click to expand...
Click to collapse
Yep, that's the file I was talking about.
I now need to flash and reboot, your file is at the root of an SDcard in my TF300T, I go through the Install menu and then, can't seem to view the content of my sdcard. Tried to mount it first but can't select it either, it will simply stay on "Internal Storage".
EDIT: The RCK icon is the only one right now that boots me into something. If I try the USB icon, it just stays on that screen forever.
Trash the two zips you have downloaded. I'm providing a new one for when we get back to that point. And there will be no doubt about which zip you are using.
http://www.mediafire.com/?hagehu5qu5ky6sf
OK. First I'll explain your earlier comment about adb being old. Twrp expects a recent adb or refuses to allow adb access ( we'll not worry at the moment about that but it is something you need to address later (I hope).
If you have a cord between your tablet and pc remove it. The sdcard may be mounted as data on the pc and not allow twrp to mount it.
You have been using this sdcard prior to this exercise?
Do you have any backups or flashable zips or anything of that nature on your internal sdcard?
If so what?
tobdaryl said:
Trash the two zips you have downloaded. I'm providing a new one for when we get back to that point. And there will be no doubt about which zip you are using.
OK. First I'll explain your earlier comment about adb being old. Twrp expects a recent adb or refuses to allow adb access ( we'll not worry at the moment about that but it is something you need to address later (I hope).
If you have a cord between your tablet and pc remove it. The sdcard may be mounted as data on the pc and not allow twrp to mount it.
You have been using this sdcard prior to this exercise?
Do you have any backups or flashable zips or anything of that nature on your internal sdcard?
If so what?
Click to expand...
Click to collapse
Zips trashed, kept only the one provided in your latest answer.
No cord between PC and tablet. Still unable to click on "Using external SD" or "Mount SDCard". It simply won't let me check the box or switch the bullet.
As for using this SDcard before, yes in a PC, but no, first time in my Asus. Also tried with another one just in case and same result.
As for backups and flashable zips, I kept everything from when I did my root and rom install.
I do know that I have a backup in the Restore menu of TWRP, which seems about the time I installed it. I suppose I could simply do a restore and avoid additional headaches, but my question is, what exactly will it restore? At this point, I'm mentally prepared to go back to what I had after installing Hydro 4.1, as long as I can use the tablet ASAP.
Asap = restore your backup.
If I'm restoring a different rom I'll wipe Cache, Dalvik Cache, and Factory Reset. If the backup is from the same rom I'm flashing and I want to keep the apps I have Installed since the backup I won't Factory Reset.
Good Luck!
tobdaryl said:
Asap = restore your backup.
If I'm restoring a different rom I'll wipe Cache, Dalvik Cache, and Factory Reset. If the backup is from the same rom I'm flashing and I want to keep the apps I have Installed since the backup I won't Factory Reset.
Good Luck!
Click to expand...
Click to collapse
So, I did the restore, and I'm up and running, but, no more Hydro 4.1. I guess my backup was probably what got done right before the installed it.
The good thing is, my tablet is working again and my root is still active. The bad part is that I'm gonna have to dig my head again in all the tutorials and try to find the best one.
Hey, I wanted to say a huge thank you for all your help, if it wasn't for guys like you, newbies like me would be stuck with useless thin computers.
irepressed said:
So, I did the restore, and I'm up and running, but, no more Hydro 4.1. I guess my backup was probably what got done right before the installed it.
The good thing is, my tablet is working again and my root is still active. The bad part is that I'm gonna have to dig my head again in all the tutorials and try to find the best one.
Hey, I wanted to say a huge thank you for all your help, if it wasn't for guys like you, newbies like me would be stuck with useless thin computers.
Click to expand...
Click to collapse
Great I'm glad you are happy. I had hoped for the outcome you expressed but this works also.
You're welcome!
Hello forums, I've got an annoying problem I've stumbled into. I wanted to download and install KBOX2 onto my OPO for the sake of being able to play gblorb files, I download the OneBox Package Manager that should do that automatically by executing a script in Terminal Emulator and instantly an error pops up as seen in the title of the thread, the whole PIE thing. Now, after extensive googling it seemed like a very early problem that eventually either got patched, or it was exclusive to early nexus models and fixed but some zip.
I have found no info on PIE in Lollipop 5.0 or 5.1, or for my OPO, outside of one website having an article on how to run python in the terminal - it had a subsection devoted to bypassing PIE, which included renaming your original linker to linker.old and then substituting in a patched linker in /system/bin/ that would avoid the whole PIE thing. The next problem I have stumbled into is that even after unlocking my boot, installing TWRP and rooting the device after a lot of hassle with drivers:
Whenever I would mount my /system for the sake of modifying the linker file, it would either keep trying indefinitely or fail promptly, after which I all of the sudden had no root access anymore, root checker showed I didn't have root anymore, and upon restarting my device it would be unable to boot into the OS, and instead boot into TWRP. After even more hassle I have some backups ready to easily mitigate all that but I simply cannot comprehend what the problem is. Seemingly I rooted the phone correctly yet when I want to execute a root action like changing something in /system/bin, it just unroots itself and bam. I have also tried doing all of the above through TWRP itself, mounting system, changing the files (successfully), and then unmounting it / leaving it mounted, it would still not be able to boot into the OS.
Bumping.
exactly the same.
i cant flash anything into /system/bin
i also want to patch linker file, to use SSHTunnel properly in Lollipop.
i use CyanogenOS (CM12S), and TWRP.
how to flash it?
Bumping once more. Does no one have this problem at all ?
I mean fine, PIE might not be common now, or the linker file I have might be the fix i need, but what about the system partition thing ?
I am a total newbie to Android modifications, and tried to find a way of specifying custom notifications on my HTC One Max. I have later found the application Ringdroid that fixes everything that I needed, but before I did that, I believed that I had to root the phone to achieve this. So, I read a lot of stuff, downloaded a lot of files, messed with adb, clockworkmod, rumrunner etc. without really knowing what I was doing, and in the end gave up, since it didn't look like I managed to root the phone properly after all. But, anyway, I understood that something had changed, since a couple of applications were missing. Anyway, the phone has worked fine since then, until recently, when I got a notice that software update 4.13.401.7, containing Android 5.0 Lollipop, and various other stuff, was ready for installation. So, I downloaded the update, and told it to install. The phone reboots, and then I get the following message:
CWM-based Recovery v6.0.5.1
E: Invalid command argument
E: Invalid command argument
Finding update package...
E: unknown volume for path [INTERNALSDCARD:0/Do
wnload/OTA_T6_UL_L50_SENSE60_MR_HTC_Europe_4.1
3.401.7-3.23.401.1_release_4360116ezjvoz69qm8r
zky.zip]
E: Can't mount INTERNALSDCARD:0/Download/OTA_T6
_UL_L50_SENSE60_MR_HTC_Eutope_4.13.401.7-3.23.
401.1_release_4360116ezjvoz69qm8rzky.zip
Installation aborted.
Rebooting...
Is there a way of letting me a) reset my phone to the default settings, letting me do this upgrade? or b), do this upgrade without resetting it?
XDA Visitor said:
I am a total newbie to Android modifications, and tried to find a way of specifying custom notifications on my HTC One Max. I have later found the application Ringdroid that fixes everything that I needed, but before I did that, I believed that I had to root the phone to achieve this. So, I read a lot of stuff, downloaded a lot of files, messed with adb, clockworkmod, rumrunner etc. without really knowing what I was doing, and in the end gave up, since it didn't look like I managed to root the phone properly after all. But, anyway, I understood that something had changed, since a couple of applications were missing. Anyway, the phone has worked fine since then, until recently, when I got a notice that software update 4.13.401.7, containing Android 5.0 Lollipop, and various other stuff, was ready for installation. So, I downloaded the update, and told it to install. The phone reboots, and then I get the following message:
CWM-based Recovery v6.0.5.1
E: Invalid command argument
E: Invalid command argument
Finding update package...
E: unknown volume for path [INTERNALSDCARD:0/Do
wnload/OTA_T6_UL_L50_SENSE60_MR_HTC_Europe_4.1
3.401.7-3.23.401.1_release_4360116ezjvoz69qm8r
zky.zip]
E: Can't mount INTERNALSDCARD:0/Download/OTA_T6
_UL_L50_SENSE60_MR_HTC_Eutope_4.13.401.7-3.23.
401.1_release_4360116ezjvoz69qm8rzky.zip
Installation aborted.
Rebooting...
Is there a way of letting me a) reset my phone to the default settings, letting me do this upgrade? or b), do this upgrade without resetting it?
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here is the main forum area for your device:
http://forum.xda-developers.com/htc-one-max
Here's where you should ask for help:
http://forum.xda-developers.com/htc-one-max/help
Consider bookmarking these sites for future reference.
Your device experts are located there and will be able to help.
Good luck!
Recently, I found a repack of Cyanogenmod 12 for the Gionee M3. I decided to install it, but all that happened was that it wiped my system partition and spat out this error:
Code:
"ApplyParsedPerms: lsetfilecon of /system/lost+found to u:object_r:systemset_metadata_recursive: some changes failed"
According to the TWRP file manager, there was nothing at all in the system partition but a folder called "bin" (which I suspect was added when TWRP asked me if I wanted to root it). I went through the installer script, but I was having some trouble because I can't tell what half of it actually does. From what I can tell, though, it copied the releasekey, then formatted the partition, then went through a big long list with "symlink" a lot of times and what looked like a list of every file that would be in the new system partition. It quit, from what I can tell, after it got down to the "metadata" section which began with a "set_metadata_recursive" command.
Does anybody know what this means, and how I can work around it?
(I'd experienced an error with this same ROM before, but it told me to do a factory reset. Now I'm having this error instead.)
Hello,
To better assist you, your thread will be moved to your device forum linked below.
http://forum.xda-developers.com/t/gionee-m3
The experts there may be able to help.
Okay, I've installed PhilZ instead of TWRP and I can now flash Lollipop ROMs. But CyanogenMod is still failing. It still just says (when I try installing SuperSU immediately after flashing) that there is no system or data partition. But the first zip (the Cyanogenmod one) doesn't throw any errors.
I got the zip from blu-dev.com.