I'm trying to create a build of lollipop dream, and every time I try to compile I get "build/core/product_config.mk:222: *** can not locate config makefile for product " cm_bacon". Stop. Don't have product spec for cm_bacon" I tried to create a full_bacon.mk based of the one that the team provided for their github, but its as if the computer doesn't recognize it. I'm still getting the same error code even if I rename the full_bacon.mk to cm_bacon.mk. any help?
So I have been at my wits end the last couple days trying to figure out exactly what's going on. I have a BLU Life One 2015, (X011Q) which is unsupported on basically every custom ROM/recovery/whatever. There is no repo for it on github, (except my own, which I'm having trouble with, and is the point of this post) no released device tree (if I'm using the right word), the only source code released for it is for the kernel on Android 4.4.4.
This far, I've extracted the required files from the boot.img (I also have the recovery.img and build.prop) using a guide I found on XDA University to build CWM out of the cyanogenmod source code. (I can't post the link to this guide, unfortunately, because I'm too new a user)
Everything in that tutorial goes fine (though it might be worth noting i have to use obbtool instead of otatools) until I get to the point where I have to run "lunch full_’device_name-eng" (For me, this is: lunch full_BLU_LIFE_ONE-eng). When I do, I run into this:
Code:
build/core/product_config.mk:245: *** Can not locate config makefile for product "full_BLU_LIFE_ONE". Stop.
Device BLU_LIFE_ONE not found. Attempting to retrieve device repository from CyanogenMod Github (http //github.com/CyanogenMod).
Repository for BLU_LIFE_ONE not found in the CyanogenMod Github repository list. If this is in error, you may need to manually add it to your local_manifests/roomservice.xml.
build/core/product_config.mk:245: *** Can not locate config makefile for product "full_BLU_LIFE_ONE". Stop.
build/core/product_config.mk:245: *** Can not locate config makefile for product "full_BLU_LIFE_ONE". Stop.
** Don't have a product spec for: 'full_BLU_LIFE_ONE'
** Do you have the right repo manifest?
In case this is helpful:
From build.prop
Code:
ro.product.brand=BLU
ro.product.device=BLU_LIFE_ONE
Files that were extracted with mkvendor.sh:
Code:
AndroidBoard.mk
AndroidProducts.mk
BoardConfig.mk
cm.mk
device_BLU_LIFE_ONE.mk
kernel
recovery.fstab
system.prop
My main thought is that I'm lacking a device tree, but after searching for others, I wonder what else would be in one, and if the files I've got don't constitute some part of the device tree.
TL;DR
Do I need to create a device tree myself for a device that has no support yet whatsoever for any kind of custom ROM/Recovery? And if so, how?
Any and all help is greatly appreciated.
Hi guys. Im trying to compile Resurrection Remix based on lolipop for my HTC Desire 620. I have downloaded RR sources, device, kernel and vendor also - github.com/bartek2017
My roomservice.xml
Code:
<manifest><project name="bartek2017/android_kernel_htc_a31ul" path="kernel/htc/a31ul" remote="github" revision="cm-12.1"/><project name="HTC-MSM8916/android_device_htc_a31ul" path="device/htc/a31ul" remote="github" revision="cm-12.1"/><project name="bartek2017/proprietary_vendor_htc" path="vendor/htc/a31ul" remote="github" revision="master"/></manifest>
Firstly after typing ". build/envsetup.sh" and "lunch" I don't see any option to choose RR for this HTC. I think it's probably because I havent created any new folder in "device/generic/..." but I dont know what should be in "AndroidProducts.mk" and "vendorsetup.sh". Secondly I also dont know if I have to change anything in "device/htc/a31ul/" files like cm.mk or cmdependencies.mk
And this error below - ??? In sources there is nothing like "device/htc/msm8916...". After creating this folder I got something similiar to Cycle detected.
Code:
build/core/product_config.mk:239: *** _nic.PRODUCTS.[[device/htc/a31ul/cm.mk]]: "device/htc/msm8916-common/msm8916.mk" does not exist. Stop.
Device a31ul not found. Attempting to retrieve device repository from CyanogenMod Github (CyanogenMod).
Repository for a31ul not found in the CyanogenMod Github repository list. If this is in error, you may need to manually add it to your local_manifests/roomservice.xml.
build/core/product_config.mk:239: *** _nic.PRODUCTS.[[device/htc/a31ul/cm.mk]]: "device/htc/msm8916-common/msm8916.mk" does not exist. Stop.
** Don't have a product spec for: 'cm_a31ul'
** Do you have the right repo manifest?
Please help me. I'll be thankful for any tip. I really want to learn how to compile roms but Im stuck
I know that this source is not Lineage but I would think the basic principles for building for an supported device under Lineage would also be applicable to any other source repository.
All of the guides I have found only tell you how to build for a supported device and not any help for an unsupported one. I figured out how to sync a suitable device tree and kernel etc but since the rom source repository does not support my device I can't go any further. I can't get it to build from my sync'd local sources it keeps trying to pull stuff from the original source repository so builds fail at the start.
I have setup a local manifest for this project that sync's the device tree and a kernel and the proprietary blobs and this sync completes without error. next I ran - source build/envsetup.sh and then brunch hlte (not a supported device I know) but that throws up this error -
build/core/product_config.mk:248: * Can not locate config makefile for product "gzosp_hlte". Stop.
Device hlte not found. Attempting to retrieve device repository from GZOSP-Devices Github (http://github.com/GZOSP-Devices).
Repository for hlte not found in the GZOSP-Devices Github repository list.
If this is in error, you may need to manually add it to your .repo/local_manifests/gzosp_manifest.xml
build/core/product_config.mk:248: * Can not locate config makefile for product "gzosp_hlte". Stop.
So I think that the error basically means that github.com/GZOSP-Devices does not have the hlte device listed so can anyone tell me how to make the build point to my local repository after I have sync'd so that it at least starts to build ?
I am a newbie to rom building and have much to learn but I would really appreciate any help you guys could give.
Thanks in advance for any an all help offered.
Hey I've been trying to port Ubuntu touch to the A10 following the official guide located here. I've found the device repository for the a10 here, and vendor blobs here. So the XML manifest file I ended up with is this:
XML:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<remote name="a10_remote" fetch = "https://github.com/geckyn" revision="lineage-16.0"/>
<project path="device/samsung/a10" name="android_device_samsung_a10" remote="a10_remote"/>
<project path="kernel/samsung/a10" name="android_kernel_samsung_exynos7885" remote="a10_remote"/>
<project path = "vendor/samsung/a10" name="proprietary_vendor_samsung_a10" remote="a10_remote"/>
</manifest>
The "./halium/devices/setup a10" command exits with no errors. But then when I run "breakfast a10", I get the following output:
build/core/product_config.mk:249: *** Can not locate config makefile for product "lineage_a10". Stop.
build/core/product_config.mk:249: *** Can not locate config makefile for product "cm_a10". Stop.
build/core/product_config.mk:249: *** Can not locate config makefile for product "lineage_a10". Stop.
Device a10 not found. Attempting to retrieve device repository from LineageOS Github (http://github.com/LineageOS).
Repository for a10 not found in the LineageOS Github repository list. If this is in error, you may need to manually add it to your lo
cal_manifests/roomservice.xml.
build/core/product_config.mk:249: *** Can not locate config makefile for product "lineage_a10". Stop.
build/core/product_config.mk:249: *** Can not locate config makefile for product "lineage_a10". Stop.
** Don't have a product spec for: 'lineage_a10'
** Do you have the right repo manifest?
The A10 doesn't have an official Lineage OS port, in my knowledge, so I understand that there would be no reference to it on Lineage's GitHub. And I don't mention this repository in my manifest. Why do I get this error then?
Hi, The official support of lineageOS 17.1 for the Samsung galaxy a10 at this time is not released.
You can use the source code of the unofficial port of lineageOS in this thread here : https://forum.xda-developers.com/t/...7-1-for-galaxy-a10-exynos-unofficial.4146815/
section Source Code.
I'm glad you're taking the time to wear this phone model, I've been waiting for a portage for a long time!
I'm french, sorry for my english.
Sundev79 said:
Hi, The official support of lineageOS 17.1 for the Samsung galaxy a10 at this time is not released.
You can use the source code of the unofficial port of lineageOS in this thread here : https://forum.xda-developers.com/t/...7-1-for-galaxy-a10-exynos-unofficial.4146815/
section Source Code.
I'm glad you're taking the time to wear this phone model, I've been waiting for a portage for a long time!
I'm french, sorry for my english.
Click to expand...
Click to collapse
Yeah I'm using the unofficial sources. The error I had above was apparently because of an uncompleted checkout. I am now stuck at another error while building. The entire output from make is here - https://pastebin.com/aznxR9rW. I'd be delighted if you could help.
I working on it, i trying to building halium on lineage-17.1 branch.
Ok, can you help-me, i have this error while launch the command breakfast :
Code:
[email protected]:~/halium-10.0$ breakfast a10
device/samsung/a10/BoardConfig.mk:153: error: device/samsung_slsi/sepolicy/sepolicy.mk: No such file or directory
15:23:39 dumpvars failed with: exit status 1
Device a10 not found. Attempting to retrieve device repository from LineageOS Github (http://github.com/LineageOS).
Repository for a10 not found in the LineageOS Github repository list. If this is in error, you may need to manually add it to your local_manifests/roomservice.xml.
device/samsung/a10/BoardConfig.mk:153: error: device/samsung_slsi/sepolicy/sepolicy.mk: No such file or directory
15:23:41 dumpvars failed with: exit status 1
device/samsung/a10/BoardConfig.mk:153: error: device/samsung_slsi/sepolicy/sepolicy.mk: No such file or directory
15:23:43 dumpvars failed with: exit status 1
** Don't have a product spec for: 'lineage_a10'
** Do you have the right repo manifest?
[email protected]:~/halium-10.0$
I don't know much about halium 10. I'm building using Halium 9 and Lineage OS 16 sources. I've been able to build halium-boot.img successfully. I'm not the right person to ask as I haven't made a port before. I can make a log of all the steps I took with Halium 9 if you want. @Halium on Telegram will probably be the best place for clarifications. Good luck!
Hi ! do you have succeeded to a bootable build ? what tour advancement ?
Hi, were you able to carry it at the end ?? I am wanting to use ubuntu touch and I only found this thread related to that