I purchased a brand new LG G Flex 2 and It dawned on me that it was a Sprint variant LS996, rooted and unlocked. I do not live in the US and the phone is working fine with my local carrier, except that there is no tethering option. It currently has Android 5.1.1 installed and software version is ZV6. Since the phone is rooted, OTA updates download but fail during installation.
Now, what I want to achieve is to update the phone to the latest software version and also retain the carrier unlock. I would be thankful if someone can point me in the right direction. It would also be nice if I am able to make a full backup of my system in its current state so I can revert if things don't well.
Thanks
I am in the same situation with my LG g flex 2, there is no hotspot option.
Follow my back to stock guide with stock images on general section. That should help you to go unroot pretty easy and then ota update. Read through that forum there are several suggestions you may apply too.
Alex_XV6700 said:
Follow my back to stock guide with stock images on general section. That should help you to go unroot pretty easy and then ota update. Read through that forum there are several suggestions you may apply too.
Click to expand...
Click to collapse
Thanks for your reply. From what I understand, I have to flash stock ZV6, OTA update to ZV9, and then flash rooted ZV9. Will I lose the SIM unlock in the process? I have seen some people on another forum claim that they went through this process without losing the SIM unlock. On an another note, I managed to enable tethering by changing network mode to Lab in the LTE settings hidden menu. This also disabled the annoying Hands Free Activation screen. However, the Wi-Fi tethering is limited to 1 user. I tried the suggestion of changing SPR to GLOBAL in build.prop, but I couldn't save the file if I added anymore than three characters in place of SPR. I also tried adding dun to APN type in the LTE settings menu, but found out that APN type is not editable.
anseroid said:
Thanks for your reply. From what I understand, I have to flash stock ZV6, OTA update to ZV9, and then flash rooted ZV9. Will I lose the SIM unlock in the process? I have seen some people on another forum claim that they went through this process without losing the SIM unlock. On an another note, I managed to enable tethering by changing network mode to Lab in the LTE settings hidden menu. This also disabled the annoying Hands Free Activation screen. However, the Wi-Fi tethering is limited to 1 user. I tried the suggestion of changing SPR to GLOBAL in build.prop, but I couldn't save the file if I added anymore than three characters in place of SPR. I also tried adding dun to APN type in the LTE settings menu, but found out that APN type is not editable.
Click to expand...
Click to collapse
You wont lose sim unlock...
Just do the process...
I also deleted some of the folders in carrier and just left the apps and I really dont remember which other cause I sold my phone.
Related
After months of being stuck on my Verizon Moto G with a locked bootloader, I finally managed to obtain freedom via the recent update to the SunShine app from jcase. My phone was having some issues prior to unlocking, and it took me several hours of labor and installing/reinstalling things to finally get TWRP and any ROM going properly. I've worked with Android tablets and custom ROMs before, but this is my first time on a Verizon phone.
I managed to get the N5X ROM installed and running, but I couldn't seem to resolve issues with data/mms, which I presume are APN related; trying to enter new APN settings in that ROM wouldn't save for whatever reason, either. For now, I'm back on an optimized stock 4.4.4 image until I can get that figured out.
My question: Is there any list of custom ROMs that do specifically work with a Verizon CDMA/XT1028 Moto G? Does anyone have a guide to getting these ROMs working on Verizon prepaid service, including any APN adjustments that need to be made? Thanks.
Followup: Still trying to figure this out, but the N5X ROM will give me working data if I enable Data Roaming. I've attempted to update the PRL for Verizon via *228, but the phone status still shows as roaming even though my PRL has been updated, displaying my network as T-CDMA 64. Is this simply an issue with my phone not properly identifying roaming/non-roaming due to the custom ROM? Verizon has the best coverage in my area, so I want to make sure it is connecting to the proper towers (and I'm not ACTUALLY roaming). Thanks.
I'm not responsible if this damages your phone, attempt at your own risk.
Hi everyone, I have stumbled upon what appears to be a working unlock solution for the G flex 2 (LS996). This is essentially a similar method of unlocking the g3, but with my unlocked by sprint node.db files. Currently MMS and Calling are not working for me on ATT, but data (LTE) and texting works. I beleive I know why calling is not working, as well as MMS, but I am not sure how to fix it, I am new to unlocking using root. Anyways, on to the guide.
First you will need to root your G Flex 2
You will also need Root Browser
Now after you have rooted download the files attached to this post
Next transfer the files to your phone if you did not download on your flex2
*Back up your node.db and node.db-library by adding .bak to the end in /carrier/apps
Once the files you downloaded are on your phone extract them to /carrier/apps
Now restart your phone with your non sprint sim card, or sprint if you are unlocking for future use
When the phone boots you should see that it is recognized, but the carrier still identifies as sprint
Go into settings, more, set mode to global, then go to apn settings and add in your apn
Now you should have full sms and data
This is as far as I have got at the moment, but I am working on calling and mms on at&t, it did appear to be working on Verizon though
Now to where I need some help:
First is calling. I think I have identified the 2 things that may be causing the problems. First is call barring, when I opened up a hidden phone menu it said that incoming, outgoing, etc calls were locked. When I try to enter that submenu to unlock them it says something about the sim or crashes. Next is hd calling. When I dial a number there is a hd symbol next to dialing, I don't know what that is, but if it is sending the call over data I am assuming that there is some type of problem with it sending it to a sprint server or something. If someone can help me figure this out I will be very thankful.
My next problem is MMS, on at&T. Whenever I try to send or download one it does not work. I might just have messed up my apn a few times but I doubt it. The MMS settings in hidden menus show up with sprint settings, and I have tried changing them but they just revert. Could anyone help me out?
PS Sorry about adding two files the first one did not show up when I posted and now I don't know how to remove
I am getting hands free activation now and then please help.Tried everything below.
iginally Posted by tomtam
Try this..
with root explorer : Go to system/app or /system/priv-app folder.
Locate Sprintsyncml. Apk
Rename it to Sprintsyncml. Bak
or
Search for OmaDmclient.apk, then click and hold the file till it popups a secondary menu, in secondary menu select RENAME.
Rename OmaDmclient.apk to OmaDmclient.apk.bak and press ok.
or
LGstartupwizard.apk... Which is located at
/system/priv-app
try this options it should work..it will disable the prompt
Thanks only found LGstartupwizard.apk but it is still popping up after rename..Please help
jmar896 said:
I'm not responsible if this damages your phone, attempt at your own risk.
Hi everyone, I have stumbled upon what appears to be a working unlock solution for the G flex 2 (LS996). This is essentially a similar method of unlocking the g3, but with my unlocked by sprint node.db files. Currently MMS and Calling are not working for me on ATT, but data (LTE) and texting works. I beleive I know why calling is not working, as well as MMS, but I am not sure how to fix it, I am new to unlocking using root. Anyways, on to the guide.
First you will need to root your G Flex 2
You will also need Root Browser
Now after you have rooted download the files attached to this post
Next transfer the files to your phone if you did not download on your flex2
*Back up your node.db and node.db-library by adding .bak to the end in /carrier/apps
Once the files you downloaded are on your phone extract them to /carrier/apps
Now restart your phone with your non sprint sim card, or sprint if you are unlocking for future use
When the phone boots you should see that it is recognized, but the carrier still identifies as sprint
Go into settings, more, set mode to global, then go to apn settings and add in your apn
Now you should have full sms and data
This is as far as I have got at the moment, but I am working on calling and mms on at&t, it did appear to be working on Verizon though
Now to where I need some help:
First is calling. I think I have identified the 2 things that may be causing the problems. First is call barring, when I opened up a hidden phone menu it said that incoming, outgoing, etc calls were locked. When I try to enter that submenu to unlock them it says something about the sim or crashes. Next is hd calling. When I dial a number there is a hd symbol next to dialing, I don't know what that is, but if it is sending the call over data I am assuming that there is some type of problem with it sending it to a sprint server or something. If someone can help me figure this out I will be very thankful.
My next problem is MMS, on at&T. Whenever I try to send or download one it does not work. I might just have messed up my apn a few times but I doubt it. The MMS settings in hidden menus show up with sprint settings, and I have tried changing them but they just revert. Could anyone help me out?
PS Sorry about adding two files the first one did not show up when I posted and now I don't know how to remove
Click to expand...
Click to collapse
first thanks for your effort!! second have you made any progress on gettin at&t working specifically talk and txt?
has any kind of progess been made yet? i suppose with a locked bootloader were gonna hit dead ends
T-mobile US with LTE Data Working
sooo i after this unlock and 2 more from the lg g3. I tried this one again I had no signal now I set it to global mode i got signal bars and its say sprint at the lock screen but in settings it says t-mobile
Text Works
Data works
LTE Data Super Fast
But no phone calling cant dial out phone app will crash and all the signal will disappear
Try dialing with 1 then area code
this is for domestic right? but for international unlock only need to change the files and it will work?
carlosirai said:
this is for domestic right? but for international unlock only need to change the files and it will work?
Click to expand...
Click to collapse
Yes that's true. Take care about permissions setup, use root explorer for that purpose. In three countries I use this phone LTE works mostly in bands 4, I also enabled that band using a guide I found here.
AndroidKing said:
sooo i after this unlock and 2 more from the lg g3. I tried this one again I had no signal now I set it to global mode i got signal bars and its say sprint at the lock screen but in settings it says t-mobile
Text Works
Data works
LTE Data Super Fast
But no phone calling cant dial out phone app will crash and all the signal will disappear
Click to expand...
Click to collapse
try downloading a dialer app from play store and see if that works..please leave feedback
i can unlock but not free^
---------- Post added at 09:32 AM ---------- Previous post was at 09:32 AM ----------
i can unlock but not free^
Fix full hands free activation
How's that?
tungkick said:
i can unlock but not free^
---------- Post added at 09:32 AM ---------- Previous post was at 09:32 AM ----------
i can unlock but not free^
Fix full hands free activation
Click to expand...
Click to collapse
I had the phone unlocked by sprint and can still not hook on to AT&T. What are you offering?
5.1.1 can unlock gsm sim too? Thank You
Changed my build.prof and got calling working flawless, just cant seem to be able to change apn settings.
ro.carrier=spr
ro.build.target_operator=spr
With this, you can also changed the spr to tmo if you want.
Anyone know how to make it so I can change apns?
matistight said:
Changed my build.prof and got calling working flawless, just cant seem to be able to change apn settings.
ro.carrier=spr
ro.build.target_operator=spr
With this, you can also changed the spr to tmo if you want.
Anyone know how to make it so I can change apns?
Click to expand...
Click to collapse
so in build prof did you change ro.carrier to spr or ro.carrier=spr?
have you tried for apn ##data#(##3282#)
dcasun said:
so in build prof did you change ro.carrier to spr or ro.carrier=spr?
have you tried for apn ##data#(##3282#)
Click to expand...
Click to collapse
When in the build.prof editor in Root Toolkit Lite, I simply changed it from "SPR" to "spr".
##data# isn't helping because I dont have the msl/spl. Everytime I go to change the APNs it wont allow me add one in. I can edit files if needed, I just need to be able to edit it haha
matistight said:
When in the build.prof editor in Root Toolkit Lite, I simply changed it from "SPR" to "spr".
##data# isn't helping because I dont have the msl/spl. Everytime I go to change the APNs it wont allow me add one in. I can edit files if needed, I just need to be able to edit it haha
Click to expand...
Click to collapse
What system version were you on?
ian577416 said:
I had the phone unlocked by sprint and can still not hook on to AT&T. What are you offering?
Click to expand...
Click to collapse
How much is it and will it be also international unlocked?
google~android said:
first thanks for your effort!! Second have you made any progress on gettin at&t working specifically talk and txt?
Click to expand...
Click to collapse
where did you find apn settings?
I see. After I flashed to zv8 they apeard. Didn't have any on zv6
carlosirai said:
this is for domestic right? but for international unlock only need to change the files and it will work?
Click to expand...
Click to collapse
@carlosirai, others,
can you help me a bit, as your post intrigued me as follows :
i bought this phone - rooted and unlocked as per method above by ebay seller for international usage.
currently, the phone is technically domestic unlocked and rooted on ZV6. this results in no OTA and node files for SPRINT modified!
as an internationsl user, who will not be using US Domestic providers or Sprint, can i unroot on ZV6? then upgrade to ZV9 then root as/if required and use with an international provider? this usage will be on 3G & LTE ( Bands can be enabled as required, post root )?
thanks in advance!
any help you
abhishek.banerjee said:
@carlosirai, others,
can you help me a bit, as your post intrigued me as follows :
i bought this phone - rooted and unlocked as per method above by ebay seller for international usage.
currently, the phone is technically domestic unlocked and rooted on ZV6. this results in no OTA and node files for SPRINT modified!
as an internationsl user, who will not be using US Domestic providers or Sprint, can i unroot on ZV6? then upgrade to ZV9 then root as/if required and use with an international provider? this usage will be on 3G & LTE ( Bands can be enabled as required, post root )?
thanks in advance!
any help you
Click to expand...
Click to collapse
Yes to all you said.
You need to flash stock zv6 system image and ota update to zv9, then root with zv9 rooted system image and do the "fixes"...
Hi,
I'am facing a big problem with my D800 LG G2
I wanted to enable tethering , so i followed instructions given here
It was a seccus enabling tehtring but when i tried to connect to LTE i was only receiving HSPAP
I did everything possible to enable LTE but in vain ( Try 2nd SIM card, Go back to JB stock Rom , make changes in Hidden menu, ..)
I think i made bad changes in Setting.db file and i can not restore original file.
Can anyone help me to restore defaut settings in this file or give me some advice to correct make change in hidden menu.
I run Stock rooted LL actually
I saw in the same thread , someone faced the same issue and resolved it by flashing T-Mobile stock Lollipop
"Flash back to kitkat and still no LTE using Simple Mobile. It must be just my phone! Guess they are not build equally!
Try everything I know how to no success and then I flash the T-Mobile stock Lollipop and LTE connected, Wow. Stupid AT&T have to remove the network type selector from us. It available to international G2 as well."
Is it safe to flash Tmobile stock ?
My goal would be to install Cyanogenmod on my SM-G920R7, but haven't been able to find too much help. Any of the rooting methods that seem to work on rest of the S6 variants, doesn't seem to work on this one. There is no TWRP available that I know of.
I would really appreciate any possible help. Thanks in advance.
i have the same problem
I think that this version of the s6 (the cspire version) isn't widely available enough and no one has bothered to make a root for it - ive been searching for a long time and still haven't found anything
I'd like to at least be able to root this thing.. On 5.1.1 now.
I have a rooted cellphone of this version (I purchased it rooted), is there any workaround to unlock GSM/LTE bands on this device?
----
Edit... Okay, so I went back to fresh stock with SmartSwitch, then flashed twrp-3.0.0-0-zerofltespr and Unikernel-v9b-BOH1-920P-100815 via odin 3.10.7, and rooted again... any method to enable gsm on this device yet?
jfarreola said:
I have a rooted cellphone of this version (I purchased it rooted), is there any workaround to unlock GSM/LTE bands on this device?
----
Edit... Okay, so I went back to fresh stock with SmartSwitch, then flashed twrp-3.0.0-0-zerofltespr and Unikernel-v9b-BOH1-920P-100815 via odin 3.10.7, and rooted again... any method to enable gsm on this device yet?
Click to expand...
Click to collapse
How exactly did you root it again? Was it SM-G920R7?
phreak311 said:
How exactly did you root it again? Was it SM-G920R7?
Click to expand...
Click to collapse
Yes, it was SM-G920R7... first, I flashed twrp-3.0.0-0-zerofltespr , then Unikernel-v9b-BOH1-920P-100815 , both via ODIN (you can google both files), note these files are NOT for r7 version (they're for sprint version *g920p*) but they'll root the phone.
I ended up getting rid of the phone as there's afaik no way to enable gsm on it
jfarreola said:
Yes, it was SM-G920R7... first, I flashed twrp-3.0.0-0-zerofltespr , then Unikernel-v9b-BOH1-920P-100815 , both via ODIN (you can google both files), note these files are NOT for r7 version (they're for sprint version *g920p*) but they'll root the phone.
I ended up getting rid of the phone as there's afaik no way to enable gsm on it
Click to expand...
Click to collapse
That's not true. I finally rooted that model and got TWRP installed, and followed the steps to get the Sprint Galaxy S4 domestic SIM unlocked. I finally got data and texting working last night, but I can't get calls to work for some reason on an AT&T SIM card. It even shows up at AT&T as my provider. AFIK it is now SIM unlocked, the only thing not working is calls like I said. I'm sooooo close to getting this working. I need people with this phone that are doing the same thing i'm doing! I only paid $50 for it! lol
Can u help me get mine unlocked , ive already rooted the phone.
shykidd said:
Can u help me get mine unlocked , ive already rooted the phone.
Click to expand...
Click to collapse
How did you root the phone thanks for any help
phreak311 said:
That's not true. I finally rooted that model and got TWRP installed, and followed the steps to get the Sprint Galaxy S4 domestic SIM unlocked. I finally got data and texting working last night, but I can't get calls to work for some reason on an AT&T SIM card. It even shows up at AT&T as my provider. AFIK it is now SIM unlocked, the only thing not working is calls like I said. I'm sooooo close to getting this working. I need people with this phone that are doing the same thing i'm doing! I only paid $50 for it! lol
Click to expand...
Click to collapse
What model did you use and what recovery to root phone
makemesmile said:
What model did you use and what recovery to root phone
Click to expand...
Click to collapse
use root for sprint or us cellular
DEXEIL said:
use root for sprint or us cellular
Click to expand...
Click to collapse
What model will work with my phone I have my backup for if something goes wrong but if I charge the recovery and have some type of issue can I use the stock rom again thanks for your help I had a gs3 rooted and really like it now I got the sm-920r7 what model with sprint or us cellular will work
Root sm-g920r7
lazydude said:
my goal would be to install cyanogenmod on my sm-g920r7, but haven't been able to find too much help. Any of the rooting methods that seem to work on rest of the s6 variants, doesn't seem to work on this one. There is no twrp available that i know of.
I would really appreciate any possible help. Thanks in advance.
Click to expand...
Click to collapse
use the cf auto root download this use google to search first one that comes up use that link go to model sm-g920p cspire and sprint uses
the same network . Use odin to install i have same phone and have mine rooted in this way. So far tried using the sprint version custom rom it will work but you can make phone calls but not the data side for phone internet.
---------- Post added at 04:09 PM ---------- Previous post was at 03:57 PM ----------
makemesmile said:
how did you root the phone thanks for any help
Click to expand...
Click to collapse
use the cf auto root download this use google to search first one that comes up use that link go to model sm-g920p cspire and sprint uses
the same network . Use odin to install i have same phone and have mine rooted in this way. So far tried using the sprint version custom rom it will work but you can make phone calls but not the data side for phone internet. Make sure you go to phone settings under find my phone and turn off reactivation lock
Any way to get the G920P roms to work on this variant? I've had luck with them with other c-spire/ntelos/r7 phones in the past. I'd like to flash Renegade to it...
blazie151 said:
Any way to get the G920P roms to work on this variant? I've had luck with them with other c-spire/ntelos/r7 phones in the past. I'd like to flash Renegade to it...
Click to expand...
Click to collapse
It works but the phone data Internet won't work can make phone calls and sprints annoying activation keeps posing up and even tried the pit file for cspire no change on that
Sent from my SM-G920R7 using Tapatalk
Wonder if anyone has got calls working using GSM sim card? I have the cspire G920R7 rooted with LTE data working using AT&T sim.
Won't receive calls (straight to vmail) and when placing calls dialer says CALL ENDED immediatly after dialing.
hmmm.
TEC602 said:
Wonder if anyone has got calls working using GSM sim card? I have the cspire G920R7 rooted with LTE data working using AT&T sim.
Won't receive calls (straight to vmail) and when placing calls dialer says CALL ENDED immediatly after dialing.
hmmm.
Click to expand...
Click to collapse
I'm working on this too. So far I've got the same situation as you, Data works but no calls/text.
in a few weeks the person who wants me to unlock this phone for them is switching carriers and plans on buying a new phone to use until I can unlock the S6, so I'll have more time to mess with it then.
There's a few things I want to try, but I can't post links here (XDA rules).
One involves Rooting and using a service code to unlock the bands (google "TeamUSCellular GSM unlock S6")
The other also requires rooting and involves using "galaxy tools" to unlock the bands (not sure if this app works with marshmallow, though) (google "theandroidsoul how to sim unlock sprint galaxy S6")
My hopes are not high for getting this phone to work fully. I've also been trying to get custom ROMs to work, but I can't get the cell radio to work at all on custom ROMs. Even with the stock SM-G920R7 Kernel straight from the latest update .tar
Sean89us said:
I'm working on this too. So far I've got the same situation as you, Data works but no calls/text.
.......
Click to expand...
Click to collapse
Thanks for the suggestion, yeah I have tried galaxy tools (GT) to change the phone mode to LTE/GSM auto and tried different CSC values, and accessed the hidden menus through there. The sim unlock in GT asks for a code which I dont know, but the phone doesn't seem to be locked anyway since it doesn't care when I try different sim cards. Weird thing is the GT app doesn't work very well (most hidden menus not working) on the current rom i'm using but worked better on the stock cspire rom. Note, I tried using MSL 000000 in ##3282# data menu and it works but most the settings in there don't seem to be applicable to GSM networks.
Currently I'VE been messing with the build.prop file, also tried the CDMA to GSM flashable zip which edits the build.prop but nothing has gotten better. One time after editing the build.prop the phone would only turn on with a blank screen and vibrate every few seconds, that was SCARY. Also was planning on flashing other radio/modem but having trouble finding many of those files and pulling them from roms seems difficult to get the correct file to flash on odin.
TEC602 said:
Thanks for the suggestion, yeah I have tried galaxy tools (GT) to change the phone mode to LTE/GSM auto and tried different CSC values, and accessed the hidden menus through there. The sim unlock in GT asks for a code which I dont know, but the phone doesn't seem to be locked anyway since it doesn't care when I try different sim cards. Weird thing is the GT app doesn't work very well (most hidden menus not working) on the current rom i'm using but worked better on the stock cspire rom. Note, I tried using MSL 000000 in ##3282# data menu and it works but most the settings in there don't seem to be applicable to GSM networks.
Currently I'VE been messing with the build.prop file, also tried the CDMA to GSM flashable zip which edits the build.prop but nothing has gotten better. One time after editing the build.prop the phone would only turn on with a blank screen and vibrate every few seconds, that was SCARY. Also was planning on flashing other radio/modem but having trouble finding many of those files and pulling them from roms seems difficult to get the correct file to flash on odin.
Click to expand...
Click to collapse
I'm not sure you'll even be able to flash other models' modem..? I can't say I've ever tried.
Anyway, getting your hands on the firmware is easy. Just use SamFirm (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647)
To use it, just input the model number (SM-G920R7/R4/P/V/T/A) and the region code, then select "auto".
Region codes and model numbers:
C-Spire: ACG (SM-G920R7)
US-Cellular: USC (SM-G920R4)
Sprint: SPR (SM-G920P)
Verizon: VZW (Locked out from download, app can't download) (SM-G920V)
T-mobile: TMB (SM-G920T)
ATT: ATT (Locked out from download, app can't download) (SM-G920A)
This app downloads firmwares directly from Samsung servers, so the download is really fast and guaranteed to be perfect/stock.
**the SM-G920R7 is closest related to the SM-G920R4 (US Cellular) & SM-G920P (Sprint). The US Cellular one recently supports GSM Bands natively without any rooting/messing with hidden settings, so that's where i'd start. You may not even need the baseband/modem, just flash the rom? I'm not sure. Good luck dude It'd be awesome if you get it working
*** Also, make sure you have a backup of your EFS before messing with the modem. Apparently if you flash an incompatible modem you can erase/corrupt the EFS partition and lose your IMEI. Hell, make a FULL backup with TWRP, and make sure that backup is copied over to your computer before doing any flashing. You can't be too careful with this.
Haven't had any luck flashing stock firmware or modems from other models using Odin, errors with a security message or something, tried G920A and G920R4. Probably for the best I suppose. Flashing custom roms has not been a problem, even if the don't work properly. Wonder if there is a test mode or way to use logcat to see why calls don't proceed like normal. Never worked on going CDMA to GSM before, I always did CDMA to CDMA in the past.
So I have a note 3 sm-n900p I want to flash if needed to Assurance Wireless that is through Virgin Mobile through Sprint. The phone they gave me is a ANS UL40 that takes a sim card. I don't know if it is a GSM hybrid or what. If I do not have a sim installed in it, it says no service. So here is what I have tried on the note 3. Stock rom installed MJ4 modem sim unlocked. TWRP and rooted. Also tried ssu.apk region lock away.apk. ssu crashes and region lock says ok. Also have tried custom rom's (many) with or without MJ4 modem. Also did the *#0011# and changed settings to menu > key input > Q,
menu > back,
menu > key input > 0000.
Wait for about 20 seconds then a menu will appear. Once the menu appears go to:
>UE SETTING & INFO
>SETTING
>PROTOCOL
>GCF
>GSM/(E)GPRS/WCDMA GCF ON
Either way I still get on any of these changes no sim or sim card not detected or sim card has locked reboot phone.
Also have tried DFS tool and change all info to what I get off the other phone Like IMEI and such, still same. Anybody have any suggestions on how to get the note 3 to take the sim card on assurance wireless? I have tried so many roms and so many ways of flashing with no luck. I have sim unlocked this phone before and it worked on Tag Mobile which is through T-mobile. Please give me any suggestions on what to do, will try anything. Thanks
Also forgot to mention I have used HLTE and HLTESPR roms and modems still no luck
Hope u figure out. I have same exact two phones. Even versions are same. I will be trying a few things later today keep you posted.
Assurance Wireless sux. Need I say more. Going to another carrier.......
Did you ever find a way to root your ANS UL40? I have one myself, & haven't found any way to do so.
HELP!!!
is there a way to flash assurance wireless to samsung galaxy note 4/ android oreo 8.1/lineage OS version?