first i want to apologize if topic is being repeated i have searched all over and i find so many ways to do stuff no luck or links dead.I was in twrp last night then it just all of sudden it shut off and has not came back up the computer does recognize the phone but only as -relink hs-usb QDLoader 9008 (com18)
Related
Solved: See post below.
So I decided to go back to Kitkat from Lollipop. To do this I went into TWRP and restored a 38R backup I made when I first got the phone in November. TWRP did its thing and booted back into 11S 38R and it seemed to work. What then happened was that I was prompted to update to 44S so I did and the phone rebooted into TWRP. TWRP came up with some sort of screen, I can't remember what it said but the last line said something about an MD5 check not beeing needed. It then turned off and I haven't been able to get it back on. I've tried holding down the power button on its own and after around 5 seconds it vibrates but nothing happens. Also when I plug it into my PC or charger the charging light doesn't turn on.
I've tried to get into recovery and fastboot mode by holding power button+up/down volume but nothing happens on screen but I still get a vibration. However when I press volume button up+power button it seems to be recognised in Windows and it brings up the device as "QHSUSB_BULK" but that is it.
Does anyone know how to fix this?
P.S: I've got a nandroid backup + modem backup from when I first got the phone available if that helps.
I was able to fix the issue using the Oneplus Recovery tool. The issue was that the phone was not being recognised by my PC despite installing the drivers included in the recovery tool. This post in the recovery tool thread had the answers:
"I also deactivate unsigned driver installation but still same fail... I found a Qualcomm HS-USB QDLoader 9008 2.1.0.5 for Windows 7 that I used. I opened the Device Manager, I found my device named QHSUSB_BULK with an yellow triangle. I pressed udate drivers , choose from computer and installed that Qualcomm HS-USB QDLoader 9008 2.1.0.5 I donwloaded. AFTER THAT the tool found my phone and I was manage to flash ROM took me half a day. I cant have done wrong , somethnig must be wrong with the drivers in the tool for w7 64bit or something . this was the first time I have hard bricked a phone EVER and I have flashed a lot . But im glad it worked out with that Qualcomm HS-USB QDLoader 9008 driver since that guy also had same problem as me and later got it to work with that driver. Qualcomm HS-USB Drivers"
http://forum.xda-developers.com/showpost.php?p=58074662&postcount=40
So that was how I fixed it.
Why it broke in the first place is a mystery but I'm just glad to be back on Kitkat 44S.
MPRG8255.hex and 8255_msimage.mbn where can i get the files? my zte v9a is bricked. cant power up. its qualcomm hsusb qdloader 9008. ... the battery died, it never came on again. i dont even understand what really happened. but that what happened. the battery was low the time i was downloading some .apks to install on my blackberry version 10. i hope now u understand what i mean. it cant power up.
my device got bricked and it shows nothing but a black screen.. no button combinations works, when i connect it to pc via usb cable it shows "Qualcomm HS-USB QSLoader 9008 (COM 7)..
i did nothing but suddenly my apps crashed one by one and then i restarted it but it wont started and then i removed the battery and placed it again and tryed to turn on the phone but nothing showed up..
sorry about my bad english
did you try to boot in download mode?
i tried but nothing happened..
I'm having the same issue , I sent the phone to some local shop , but they told me the board is gone .
Please update if anyone have a solution .
My phone froze while browsing the internet and after that turned off and I can't get it back on. Plugging in to charge the led doesn't turn on as usual. Plugging it to my computer it shows up as "qhsusb_bulk".So basically my phone is hard bricked. Anyone had this problem? If so how to fix it? Thank you.
For some reason phone booted today but at pin code screen froze again.
Same here I was using it normally and suddenly it died, it is on Qualcomm HS-USB QDLoader 9008 mode aka super dead, I'm going to try the G3 fix, will report back.
isaac331 said:
Same here I was using it normally and suddenly it died, it is on Qualcomm HS-USB QDLoader 9008 mode aka super dead, I'm going to try the G3 fix, will report back.
Click to expand...
Click to collapse
Do tell here.
As I knew for 9008 mode only solution available is direct eMMC flashing.
Sent from my LG-F460L using XDA-Developers mobile app
I tried Flashing my acer liquid Z330 with a custom rom after installing TWRP the rom could not Flash in So i flashed it with another version of TWRP and I have done a missclick with it and downloaded one for Asus Not acer Now my phone dont even turn on , so to fix it i plugged it on the laptop and installed te qualcomm snapdragon drivers , My phone screen dont show anything he dont vibrate nothing just the charge led is On when i plug it , more than that when i plug it (after instaling drivers) Show me ''qualcomm hs-usb diagnostics 900E com10'' Instead of ''Qualcomm hs-usb QDloader 9008'' the phone has removable battery so i tried all te things i found on internet and XDA Forums I installed Qdloader one but no changes its always shown off By Diagnostics 900E one Then i can't flash it with QFIl I dont know what to do And Further more I can't turn it In Fastboot Mode or EDL One No changes are happening Its like a dead Phone
I'll apreciate Any help from You And sorry For my grammatical mistakes Im french
UP
UP
eyznec said:
I tried Flashing my acer liquid Z330 with a custom rom after installing TWRP the rom could not Flash in So i flashed it with another version of TWRP and I have done a missclick with it and downloaded one for Asus Not acer Now my phone dont even turn on , so to fix it i plugged it on the laptop and installed te qualcomm snapdragon drivers , My phone screen dont show anything he dont vibrate nothing just the charge led is On when i plug it , more than that when i plug it (after instaling drivers) Show me ''qualcomm hs-usb diagnostics 900E com10'' Instead of ''Qualcomm hs-usb QDloader 9008'' the phone has removable battery so i tried all te things i found on internet and XDA Forums I installed Qdloader one but no changes its always shown off By Diagnostics 900E one Then i can't flash it with QFIl I dont know what to do And Further more I can't turn it In Fastboot Mode or EDL One No changes are happening Its like a dead Phone
I'll apreciate Any help from You And sorry For my grammatical mistakes Im french
Click to expand...
Click to collapse
Hello and welcome to XDA-developers!
Since there is no information about harbricked Acer Z330 on XDA, I sugedt you put your question on Questions and Answers to see if any member has a solution for your problem.