So i went up and TRIED to install cm 12 nightly on my z3 anddddd... Yeas it is left in the tried section.. I got unlocked bl etc everything fine, but im on mac so instructions are always well none lol, i got like 10 windows pcs dualbooted windowsses on my macs etc but i just prefer to do everything on a mac. So stuck at boot pink light at the start of reboot. What to do?? I knew really that its gonna fail lol but u know testin out .. Only gonna make my skills better XDD
masaforce said:
So i went up and TRIED to install cm 12 nightly on my z3 anddddd... Yeas it is left in the tried section.. I got unlocked bl etc everything fine, but im on mac so instructions are always well none lol, i got like 10 windows pcs dualbooted windowsses on my macs etc but i just prefer to do everything on a mac. So stuck at boot pink light at the start of reboot. What to do?? I knew really that its gonna fail lol but u know testin out .. Only gonna make my skills better XDD
Click to expand...
Click to collapse
however remains bootloop?
Nulcis98 said:
however remains bootloop?
Click to expand...
Click to collapse
Yep.. Iknow that i should just roll up on my mac and flash a wroking boot.img and recovery anddd what else did i flash. That should work xd, just wanting o know what u guys think
masaforce said:
Yep.. Iknow that i should just roll up on my mac and flash a wroking boot.img and recovery anddd what else did i flash. That should work xd, just wanting o know what u guys think
Click to expand...
Click to collapse
Did you install the cm kernel first? If you just flashed a nightly without the kernel, im pretty sure you would be where you are now.
Beetle84 said:
Did you install the cm kernel first? If you just flashed a nightly without the kernel, im pretty sure you would be where you are now.
Click to expand...
Click to collapse
bro i don't see any kernel out here http://download.cyanogenmod.org/?device=z3 i just flashed boot.img and recovery and was gonna install the cm from recovery like on my z5p? as always before the kernel was in a different package, i don't see the kernel in the cm12 file. so seems that i gotta fasboot flash the cm12 ON MY MAC not the recovery??? idk how to do dat
masaforce said:
bro i don't see any kernel out here http://download.cyanogenmod.org/?device=z3 i just flashed boot.img and recovery and was gonna install the cm from recovery like on my z5p? as always before the kernel was in a different package, i don't see the kernel in the cm12 file. so seems that i gotta fasboot flash the cm12 ON MY MAC not the recovery??? idk how to do dat
Click to expand...
Click to collapse
boot.img is the kernel.
Last time I flashed cm (12) I fastboot flashed the cm boot.img, then fastboot flashed the xz recovery.img, rebooted to xz recovery then flashed the nightly.
Beetle84 said:
boot.img is the kernel.
Last time I flashed cm (12) I fastboot flashed the cm boot.img, then fastboot flashed the xz recovery.img, rebooted to xz recovery then flashed the nightly.
Click to expand...
Click to collapse
Oh k but i did the same but mines on bootloop and cant access recovery lol
Related
Hey I've been trying to flash kernel via fastboot mode in flash tool but I'm facing a strange problem... Flashtool drivers have been installed properly so don't tell me to install drivers again... Flashmode works perfectly, I can flash ftf files but in fastboot it shows the error as shown in the pictures.... If anyone knows what could be the cause behind this, do let me know.... Thanks.
ShanePunk123 said:
Hey I've been trying to flash kernel via fastboot mode in flash tool but I'm facing a strange problem... Flashtool drivers have been installed properly so don't tell me to install drivers again... Flashmode works perfectly, I can flash ftf files but in fastboot it shows the error as shown in the pictures.... If anyone knows what could be the cause behind this, do let me know.... Thanks.
Click to expand...
Click to collapse
What is the version of android you have in D2203? 4.4.2 or 4.4.4?
If you can not send by FlashTool then you try to use adb.
Go to the folder FlashTool \ x10flasher_lib.
Copy the img file to that folder and then open a command window and you execute the following command: fastboot flash boot xxxxxxxxx.img
pedroj666 said:
What is the version of android you have in D2203? 4.4.2 or 4.4.4?
If you can not send by FlashTool then you try to use adb.
Go to the folder FlashTool \ x10flasher_lib.
Copy the img file to that folder and then open a command window and you execute the following command: fastboot flash boot xxxxxxxxx.img
Click to expand...
Click to collapse
Now I'm stuck on 'waiting for device' BTW, I've installed this new build of AOSP and I'm just stuck on the boot animation... There's no recovery installed that's why I wanted to install this recovery from the AOSP zip package.
ShanePunk123 said:
Now I'm stuck on 'waiting for device' BTW, I've installed this new build of AOSP and I'm just stuck on the boot animation... There's no recovery installed that's why I wanted to install this recovery from the AOSP zip package.
Click to expand...
Click to collapse
Are you running new bootloader with recovery support.
vinay said:
Are you running new bootloader with recovery support.
Click to expand...
Click to collapse
Ya I applied that bootloader with emma while I was using CM12 and it was working perfectly fine with it... And this AOSP rom, It's just stuck on the boot animation... I left it overnight and phone was hot as anything damn....
ShanePunk123 said:
Ya I applied that bootloader with emma while I was using CM12 and it was working perfectly fine with it... And this AOSP rom, It's just stuck on the boot animation... I left it overnight and phone was hot as anything damn....
Click to expand...
Click to collapse
I also flash the latest version available for my D2203 (
AOSP_L_MR1_150504_flamingo) and the same happened to me.
After the Sony logo appears, the screen turns black and does nothing!
It's a bug not yet solved xD
pedroj666 said:
I also flash the latest version available for my D2203 (
AOSP_L_MR1_150504_flamingo) and the same happened to me.
After the Sony logo appears, the screen turns black and does nothing!
It's a bug not yet solved xD
Click to expand...
Click to collapse
Hey I was able to solve the problem.... I just restarted the computer... Then it detected fastboot mode too... And I flashed the latest AOSP build but it's still unstable... Camera isn't there and dull display. Rest all fine, wifi, network, bluetooth, wake up from lockscreen.
PS. in order to flash the AOSP rom, you need the new open device bootloader.... flash that first and then flash the AOSP rom and it'll boot up
ShanePunk123 said:
Hey I was able to solve the problem.... I just restarted the computer... Then it detected fastboot mode too... And I flashed the latest AOSP build but it's still unstable... Camera isn't there and dull display. Rest all fine, wifi, network, bluetooth, wake up from lockscreen.
PS. in order to flash the AOSP rom, you need the new open device bootloader.... flash that first and then flash the AOSP rom and it'll boot up
Click to expand...
Click to collapse
Can you share.
Recovery.img with me.
I have to check how recovery.img is made.
Sent from my Xperia E3 using XDA Free mobile app
vinay said:
Can you share.
Recovery.img with me.
I have to check how recovery.img is made.
Sent from my Xperia E3 using XDA Free mobile app
Click to expand...
Click to collapse
Which recovery.img??? from the AOSP package??
ShanePunk123 said:
Which recovery.img??? from the AOSP package??
Click to expand...
Click to collapse
Yes...
Sent from my Xperia E3 using XDA Free mobile app
vinay said:
Yes...
Sent from my Xperia E3 using XDA Free mobile app
Click to expand...
Click to collapse
alright... here you go
ShanePunk123 said:
alright... here you go
Click to expand...
Click to collapse
thanks. i got it.
vinay said:
Yes...
Sent from my Xperia E3 using XDA Free mobile app
Click to expand...
Click to collapse
You can find the whole package here AOSP_L_MR1_150507_flamingo.zip
entony80 said:
You can find the whole package here AOSP_L_MR1_150507_flamingo.zip
Click to expand...
Click to collapse
yeah but i only need recovery.img.
downloading whole package is waste of time and bandwith.
vinay said:
yeah but i only need recovery.img.
downloading whole package is waste of time and bandwith.
Click to expand...
Click to collapse
I hoped you were working on this rom.... Ahahahahaa : D: D
entony80 said:
I hoped you were working on this rom.... Ahahahahaa : D: D
Click to expand...
Click to collapse
i am not working on any rom.
there are chances i would make a recovery for new botloader to be flashed on recovery partation using fastboot flash recovery recovery.img
entony80 said:
Ahahahahaa : D: D
Click to expand...
Click to collapse
better start with h.
ahahah sound,s like ahhh...
entony80 said:
You can find the whole package here AOSP_L_MR1_150507_flamingo.zip
Click to expand...
Click to collapse
AOSP_L_MR1_150507 ??? Is this a new build?? coz recently the build AOSP_L_MR1_150506 came out... have you used this build??? Any changes made?? I don't know when will we get the camera function working
ShanePunk123 said:
AOSP_L_MR1_150507 ??? Is this a new build?? coz recently the build AOSP_L_MR1_150506 came out... have you used this build??? Any changes made?? I don't know when will we get the camera function working
Click to expand...
Click to collapse
I do not see the AOSP_L_MR1_150506 but AOSP_L_MR1_150507, are also the same, you're not considering the timezone
i tried flashing cm12.1 uber rom on my device with miui 7 5.8.15 but it went in bootloop so to fix that flashed the stock rom with miflash but still it keep on reatarting every few seconds i tried flashing through mi pc suit as well need help guys please help?? :crying:
nishchay25 said:
i tried flashing cm12.1 uber rom on my device with miui 7 5.8.15 but it went in bootloop so to fix that flashed the stock rom with miflash but still it keep on reatarting every few seconds i tried flashing through mi pc suit as well need help guys please help?? :crying:
Click to expand...
Click to collapse
Flash MIUI 6 version instead of 7.
Then try CM again.
But flashing MIUI should be done via Fastboot, so be sure to get the right version.
tried it!!
elot01 said:
Flash MIUI 6 version instead of 7.
Then try CM again.
But flashing MIUI should be done via Fastboot, so be sure to get the right version.
Click to expand...
Click to collapse
I have tried 6 as well 7 version of miui via fastboot everything goes well but it keeps restarting on its own !!
i too hav the same problem of rebooting continuously.Please help......
:crying::crying:
nishchay25 said:
I have tried 6 as well 7 version of miui via fastboot everything goes well but it keeps restarting on its own !!
Click to expand...
Click to collapse
...................
please help........really frustrated
nishchay25 said:
I have tried 6 as well 7 version of miui via fastboot everything goes well but it keeps restarting on its own !!
Click to expand...
Click to collapse
Atharva Logan said:
:crying::crying:...................
please help........really frustrated
Click to expand...
Click to collapse
Do you guys flash the miui 6 room using fFASTBOOT? Refer this link for the tutorial LINK
Fastboot rom is different from recovery rom because it has all the necessary files to return your device to complete stock rom as it includes recovery img, modem files etc. Try to flash the 6.6.10.0 or 6.6.5.0. Good luck
k
okay i will try.....Thank you
looping problem
i was burning my midnights oil for haplessely flashing Cm12.1.... nothing was happening...
later found out that i was not using miui dev ROM. then downloaded both 5.1 as well as 6.6...
still stuck at languages section... GAPPS was not the correct one. downloaded arm64 5.1 stock... voila.... running smooth since yesterday....
thanks @dh.harald & @omerjerk
now ready to try CM13
When you want a clean install, use the fastboot one. It seems to be a non-system partition problem, thus try flashing fastboot rom and see its outcome
I am trying to flash cm12 with miui 7 but it gone into bootloop then i restore into stock by using twrp recovery it comes to normal. Then i tried flashing resurrection rom it hangs at language point then it again it goes into bootloop. Plz tell me how to flash ROM..??
Sarthak1999 said:
I am trying to flash cm12 with miui 7 but it gone into bootloop then i restore into stock by using twrp recovery it comes to normal. Then i tried flashing resurrection rom it hangs at language point then it again it goes into bootloop. Plz tell me how to flash ROM..??
Click to expand...
Click to collapse
Use MIUI 6.6.10.0 or 6.6.5.0 and then flash any desired ROM on top of it. Else you may face problems and bootloops.
Yea its working thx
First tried installing ROM, went to boot loop, since there is no 6.6 ver I installed 6.11 dev version. later I tried to install all the ROMs(nameless, AICP, CM13, Bean, Resurr..) None worked. Now back to miui 7. Damm slow & pissed..
sreddy4u said:
First tried installing ROM, went to boot loop, since there is no 6.6 ver I installed 6.11 dev version. later I tried to install all the ROMs(nameless, AICP, CM13, Bean, Resurr..) None worked. Now back to miui 7. Damm slow & pissed..
Click to expand...
Click to collapse
Look at xiaomi thread for 6.6.10
6.11 dev it's Definitely different ....
faizauthar12 said:
Look at xiaomi thread for 6.6.10
6.11 dev it's Definitely different ....
Click to expand...
Click to collapse
http://en.miui.com/thread-144558-1-1.html
Is this the link to download & install through fastboot. Then change the ROM ?
If not Suggest.
sreddy4u said:
http://en.miui.com/thread-144558-1-1.html
Is this the link to download & install through fastboot. Then change the ROM ?
If not Suggest.
Click to expand...
Click to collapse
Ya
Use it...
Or use a small patch...
https://drive.google.com/file/d/0B_NyTBF8E1FZbktVVm41ZkJCb28/view
faizauthar12 said:
Ya
Use it...
Or use a small patch...
https://drive.google.com/file/d/0B_NyTBF8E1FZbktVVm41ZkJCb28/view
Click to expand...
Click to collapse
Tried to use the patch in miui update way. Unable to install.
faizauthar12 said:
Look at xiaomi thread for 6.6.10
6.11 dev it's Definitely different ....
Click to expand...
Click to collapse
I was on AICP official 26.12 build. When tried to update via OTA got boot loop. Then tried to do a clean instal of AICP both 26/12 and 28/12 build. but to no use. Still bootloop. After being frustrated I flashed Fastboot Rom of latest stable MIUI firmware (MIUI8) hoping it would take my device back to stock. But still phone restrts again and again on its own. Pls help me. I dont know what to do.
---------- Post added at 03:10 PM ---------- Previous post was at 03:08 PM ----------
nishchay25 said:
i tried flashing cm12.1 uber rom on my device with miui 7 5.8.15 but it went in bootloop so to fix that flashed the stock rom with miflash but still it keep on reatarting every few seconds i tried flashing through mi pc suit as well need help guys please help?? :crying:
Click to expand...
Click to collapse
Ur problem solved? I am having same headache. I dont know what to do
arunsebstn said:
I was on AICP official 26.12 build. When tried to update via OTA got boot loop. Then tried to do a clean instal of AICP both 26/12 and 28/12 build. but to no use. Still bootloop. After being frustrated I flashed Fastboot Rom of latest stable MIUI firmware (MIUI8) hoping it would take my device back to stock. But still phone restrts again and again on its own. Pls help me. I dont know what to do.
---------- Post added at 03:10 PM ---------- Previous post was at 03:08 PM ----------
Ur problem solved? I am having same headache. I dont know what to do
Click to expand...
Click to collapse
Clean flash other custom rom,see if the problem solve.
raymond_bqg said:
Clean flash other custom rom,see if the problem solve.
Click to expand...
Click to collapse
Yep. Tried already everything. No use. But today flashed miui 6.6.10. After that phone booted up to "loading apps" (ready to rock in background ). Then suddenly got off and the restarting phenomena started again. After MI logo restarts again. I m totally frustrated
arunsebstn said:
Yep. Tried already everything. No use. But today flashed miui 6.6.10. After that phone booted up to "loading apps" (ready to rock in background ). Then suddenly got off and the restarting phenomena started again. After MI logo restarts again. I m totally frustrated
Click to expand...
Click to collapse
I had the same issue tried everything but no use then flashed miui and went to service as the phn was in warranty they changed the mother board and gave it back to me!!
Hi,
XT1039: bootloader unlocked, rooted, stock rom 4.4.4
TO: nightly
Flashed 4118 bootloader, as detailed in http://forum.xda-developers.com/moto...tions-t2996087
It was successful.
Followed https://wiki.cyanogenmod.org/w/Install_CM_for_peregrine
unlocked bootloader
installed cm-recovery from here: https://download.cyanogenmod.org/?type=nightly&device=peregrine
tried to flash cm, got a bootloader error,
followed this guide: http://forum.xda-developers.com/showpost.php?p=59520890&postcount=233
Now using bootloader 411A
flashed cm-13.0-20160121-NIGHTLY-peregrine.zip
from here: https://download.cyanogenmod.org/?type=nightly&device=peregrine
now the phone is stuck at the boot screen.
So I flashed twrp recovery, successful and reflashed cm-13.0-20160121-NIGHTLY-peregrine.zip
I tried several different guides that included all sorts of cache deletion and format orders but the result is still the same
(I am not using an sdcard but only the internal storage.)
After rebooting, the phone is stuck on the Cyanogenmod boot icon (blinking cat face) since past half hour.
Please guide how to debug/recover.
fastboot and recovery are working
Thanks,
[edit:]
The cm-13.0-20160121-NIGHTLY-peregrine.zip was transferred by mounting the internal storage on the PC and copying it manually. Just in case this matters
Hi,
Try to flash stock rom from here : http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816
satanas17 said:
Hi,
Try to flash stock rom from here : http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816
Click to expand...
Click to collapse
Thanks for the reply, but the goal is to get cyanogenmod on my phone. How does the stock rom help me with that??
Just for testing, I have installed the stock rom to see if it works and it does. I now have a Motorola Android 5.1 on my phone. But thats not what I wanted.
Anyone having any idea how to make cyanogenmod work?
karstenme said:
Thanks for the reply, but the goal is to get cyanogenmod on my phone. How does the stock rom help me with that??
Click to expand...
Click to collapse
Just to restoring a kernel on it...after restoring one, go to TWRP, make your wipes and flash again your CM
satanas17 said:
Just to restoring a kernel on it...after restoring one, go to TWRP, make your wipes and flash again your CM
Click to expand...
Click to collapse
WOW Thank you very much, its working
Maybe you can also explain to my why installing the custom rom mattered, since I wiped everything before installing cm again, I would assume there is nothing of the stock rom left on the device.
karstenme said:
WOW Thank you very much, its working
Click to expand...
Click to collapse
U're welcome
karstenme said:
Maybe you can also explain to my why installing the custom rom mattered, since I wiped everything before installing cm again, I would assume there is nothing of the stock rom left on the device.
Click to expand...
Click to collapse
Not really able to explain...sometimes sh*t happens...
But this procedure works almost every time.
Surely due to your bootloader error after your first flash with CM recovery...something was broken...
Most important, now, it's working...Enjoy
I install cm but google play is not working and sallular data also not working.. Plz any one help me please..
I have a oneplus one with Oxygen OS flashed on it. Because of it I cant boot up into recovery, I tried flashing the newest TWRP and still nothing. I cant get into the recovery to flash a new rom because Oxygen Os has given me a lot of issues. the phone works perfectly fine, I just cant boot into the recovery...can anyone help me with this. btw I am not too savvy with this so please dont get too technical lol
thank you
arashsh2002 said:
I have a oneplus one with Oxygen OS flashed on it. Because of it I cant boot up into recovery, I tried flashing the newest TWRP and still nothing. I cant get into the recovery to flash a new rom because Oxygen Os has given me a lot of issues. the phone works perfectly fine, I just cant boot into the recovery...can anyone help me with this. btw I am not too savvy with this so please dont get too technical lol
thank you
Click to expand...
Click to collapse
Download This file, install it somewhere and run Revert-2-CM.exe. Make sure you have fastboot drivers installed or it wont work.
https://drive.google.com/file/d/0B-ikULjZZlloNHpOdVBrTzQxZzQ/view?usp=drive_web
Mr.Ak said:
Download This file, install it somewhere and run Revert-2-CM.exe. Make sure you have fastboot drivers installed or it wont work.
https://drive.google.com/file/d/0B-ikULjZZlloNHpOdVBrTzQxZzQ/view?usp=drive_web
Click to expand...
Click to collapse
what is it? is it going to wipe my phone?
arashsh2002 said:
what is it? is it going to wipe my phone?
Click to expand...
Click to collapse
No it will revert your recovery to TWRP.
Mr.Ak said:
No it will revert your recovery to TWRP.
Click to expand...
Click to collapse
it actually got flagged by bitdefender as a gen.trojan and got wiped
arashsh2002 said:
it actually got flagged by bitdefender as a gen.trojan and got wiped
Click to expand...
Click to collapse
It's a false alarm,don't worry.Disable your antivirus for 5 mins and do the work,then enable it again.
Mr.Ak said:
It's a false alarm,don't worry.Disable your antivirus for 5 mins and do the work,then enable it again.
Click to expand...
Click to collapse
yea that doesnt sound right lol
Hi all
I just updated to ESG5 version of OREO. The nightmare comes... I cannot boot again now !!
Until I flash back the original version of OREO, that is , with ESG5 bootloader one, it can boot.
However, I cannot use TWRP and root anymore !
Anyone has idea? thanks a lot
AP_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship_meta.tar
BL_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
CP_G930FXXS5ESG5_CP13334970_CL14843133_QB24881129_REV00_user_low_ship.tar
CSC_OZS_G930FOZS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
sonic997 said:
Hi all
I just updated to ESG5 version of OREO. The nightmare comes... I cannot boot again now !!
Until I flash back the original version of OREO, that is , with ESG5 bootloader one, it can boot.
However, I cannot use TWRP and root anymore !
Anyone has idea? thanks a lot
AP_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship_meta.tar
BL_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
CP_G930FXXS5ESG5_CP13334970_CL14843133_QB24881129_REV00_user_low_ship.tar
CSC_OZS_G930FOZS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
Click to expand...
Click to collapse
what version of TWRP are you using? Theyre not all cross compatible
youdoofus said:
what version of TWRP are you using? Theyre not all cross compatible
Click to expand...
Click to collapse
twrp-3.3.1-0-herolte
I have already flashed the following but cannot boot !
no-verity-opt-encrypt-6.0.zip
sonic997 said:
twrp-3.3.1-0-herolte
I have already flashed the following but cannot boot !
no-verity-opt-encrypt-6.0.zip
Click to expand...
Click to collapse
wait, what? what is that file and why are you flashing it? Also, its a zip file, im at work atm and its 756 am and and ive only had 2 sips of my first monster, but as i recall, you only flash tar.md5 files in Odin
youdoofus said:
wait, what? what is that file and why are you flashing it? Also, its a zip file, im at work atm and its 756 am and and ive only had 2 sips of my first monster, but as i recall, you only flash tar.md5 files in Odin
Click to expand...
Click to collapse
I flash TWRP in Odin and flash no-verity-opt-encrypt-6.0.zip in TWRP.
It has a normal boot for previous version of bootloader.
sonic997 said:
I flash TWRP in Odin and flash no-verity-opt-encrypt-6.0.zip in TWRP.
It has a normal boot for previous version of bootloader.
Click to expand...
Click to collapse
ok, that other post made it seem like you were trying to flash that in Odin LoL anyways so, when you do all that and then reboot, it just goes black or does it bootloop?
youdoofus said:
ok, that other post made it seem like you were trying to flash that in Odin LoL anyways so, when you do all that and then reboot, it just goes black or does it bootloop?
Click to expand...
Click to collapse
yes, it just bootloop
Don't use no-verity-opt-encrypt-6.0.zip (you probably don't need it) .
Start all over. Flash the stock ROM with Odin, then flash TWRP, and then flash Magisk (via TWRP).