Related
DISCLAIMER
Proceed at your own risk. I am not responsible for ANY outcome (good or bad) as a result of YOUR actions! Even following this guide perfectly (or any other cooked ROM guide) you could (however remote the possibility) BRICK your device. IF you choose to follow this guide READ all the way through as a "dry run" until all the steps make some sense.
GATHER YOUR SUPPLIES
Phone (fully charged)
SD card (in your phone)
Computer (w/internet access)
USB cable (one that fits your phone) OR a card reader + micro SD adapter
Download these files onto your pc:
Android 1.5 base image SAPPIMG.nbh_____________________(33d958062cc02bb2cec157f68621d2ff)
To install ALT recovery flashrec _________________________(try the latest, if it fails work backward)
Alternate Recovery img recovery-RA-sapphire-v1.5.2G.img___(md5sum - 4822fd118867bb2e66a53243a408f40e)
Android 1.6 base image DRC83_base_defanged.zip__________(md5sum - 081379e9b525484bcd1ee42bd0031a4c)
CyanogenMod Rom img CyanogenMod ROM of choice________(4.2.14.1 md5sum - c2a1e549d9296d97566e86a0a1c4bc9c)
Android ring tone pack audio-resources.zip________________(md5sum - 6cbefb897e2fb3b954d19c692d5c6966)
32A users I am researching the right files/steps to get ya'll onto CM, read this page of cyanogenmod wiki in the meantime
[*]32B UK users if my method doesn't work try this post from a user on this thread
(NOTE: If any of these links 'die' Google the file name & pm me so I can update the link)
Md5sum Values
how to check md5sum in windows : MD5summer use this program to make an md5sum file & compare values
how to check md5sum in unix/linux : in terminal type 'md5sum /path/to/file.name' [enter] & compare values
Do this once the files are on your SD card to ensure no device-to-device file transfer corruption
BACK UP YOUR FILES
Before doing ANY mods you should ALWAYS backup your important files.
Connect phone to pc via USB
On the phone: pull down the notification bar & press ->USB Connected->Mount
On the pc: copy any & all files/folders you want to keep.
On the pc: Close the SD card folder on your pc.
On the phone: pull down the notification bar & press ->USB Connected->Un-mount/Turn off USB storage. Once this is done remove USB cable.
(NOTE: By the end of this guide EVERYTHING on your card will be GONE so don't skip this step!)
FORMAT SD CARD
From the home screen press Menu->Settings->SD card & phone storage->Un-mount SD card.
Once it is un-mounted press ->Format SD card.
Once it is formatted & has re-mounted go back to the home screen and press Menu->Settings->Applications->make sure 'Unknown sources' is checked.
(NOTE: if your phone is already ROOTED & running a Custom/Cooked ROM you can likely skip the SETUP section just check Amon_RA's thread for alternate install options)
SETUP
Find out what version of Android your phone has installed. From the home screen Press Menu->Settings->About phone-> scroll to Firmware Version.
(this is your Android Version)
If you're on Android 1.5 proceed to INSTALL section.
If you're on Android 1.6 re-connect phone to pc.
Copy the sappimg.nbh & place it on your SD card, then close everything & disconnect USB. (I am told this MUST be the only file on your SDcard or the validation will fail)
Turn off phone.
Boot into 'Fast Boot' like this: Press-&-Hold END/Power AND Pres-&-Hold Volume Down until the Fast Boot screen appears.
Press the trackball (action button) and wait for it to flash the sappimg.nbh
Once fully complete reboot phone & proceed to INSTALL section.
INSTALL
Connect phone to pc via USB
On the phone: pull down the notification bar & press ->USB Connected->Mount
On the pc: copy the FlashRec.apk & the Amon RA recovery.img onto your SD card.
If you don’t have a ‘file manager’ or ‘app manager’ go to the market & download one such as: ASTRO, LINDA, AppManager or the like. Then browse to your SD card & open/run the flashrec.apk to install it. (if asked what to open with choose Package Installer)
Open RecoveryFlash (flashrec) & make a backup of your current recovery.img. Flashrec just made "recovery-backup.img" on the root of your SDcard, so now rename Amon Ra's recovery to "recovery-backup.img" (choose replace when the dulpicate file name message appears) then open flashrec again & choose restore recovery. (Credit for this step goes to deb82swearingen Much easier then the orig method I was shone for using flashrec)
Once the flash is complete turn the phone off.
Boot into 'Recovery' like this: Press-&-Hold END/Power AND Pres-&-Hold Home. (this will be a black background with green text options)
Scroll down to ‘partition’ (press trackball to select)->partition SD->follow onscreen steps (HOME=confirm, VOL +/- changes partition size, any other key=cancel).
Once partitioning is complete press BACK to get to partition menu & scroll down to 'SD:ext2 to ext3’ press trackball to select (if you have a class 4 or 6 SD card you can then go for 'SD:ext3 to ext4' but don't try it on class2 cards it will cause system instability & likely FRY your SD card... if you don't know your class stop @ ext3).
go BACK until top says "Android system recovery" ->Connect phone to pc & scroll to 'USB-MS toggle'->HOME to confirm.
Copy the HTC 1.6 BASE & CyanogenMod ROM & Contacts.apk files onto your SD card then close the SD card folder on your PC & toggle USB-MS again, then disconnect from the pc.
Scroll to & select ‘wipe'->wipe data partition->CONFIRM
Scroll to & select ‘Flash update image->Apply sdcard:choose zip & select the HTC BASE file & let it complete (this will take a few min be patient). DO NOT REBOOT!
Scroll to & select ‘Flash update image->Apply sdcard:choose zip & select the CyanogenMod file & let it complete (this will take a few min be patient).
Once the flash is complete reboot phone (this will take up words of 5-10min+ be patient).
Once up & running on latest CyanogenMod connect to pc again & unzip the audio-resources.zip directly onto your SD card.
**************************Only Applies To CM 4.2.13**************************
Fixed Contacts.apk
Now that you have 4.2.13 installed it's time to fix the bug listed in Cyan's change-log. We will do this by replacing the broken Contacts app with the fixed Contacts.apk that you downloaded. If you get a pop-up asking about giving super user rights just hit the check mark to remember this answer & press 'yes'. This is UNIX & UNIX is unforgiving so pay attention to all punctuation, symbols, UPPER CASE & lower case. They are different & if you don't do it exactly it won't work. (UNIX assumes that you know what you want it to do so it will do whatever you tell it to, even if what you tell it to do breaks it.) So long as you are able to type what you see this is easy
Open Terminal Emulator & type these lines (hitting enter at the [E])
su [E]
mount -o rw,remount /system [E]
cp /sdcard/Contacts.apk /system/app/Contacts.apk [E]
mount -o ro,remount /system [E]
reboot [E]
(The reboot is precautionary but generally a good idea anytime you replace /system files.)
**************************************************************************
Themes/Modding
Now for those not fond of the plain Android theme you may enjoy this little app that has a growing movement backing it, read about what MetaMorph is here and then see the fast growing list of 'morphs/themes' available here.
Signatures
Now that you're a part of the modding community please For The Love Of MODDING take a moment to put the specs for your phone/ROM/theme/etc into your sig so that in the future if you have questions those of us who try to answer you don't have to play forum tag to get this basic info from you.
~psguardian
P.S. THANKS fhaines !!!!
fhaines spent days sifting through the forums to pick all these tidbits out of the masses of G1 ROM flashing posts & forwarded it to me so I could flash my MT3G, I want to say thank you to fhaines for his hard work. I just worked out the formatting & simplified the verbiage to as plain English as I could. Hope this helps those who are a bit timid to test the CM Rom waters (as I was).
Is it required to partition the sdcard, or is that just for Apps2SD & swap?
lupascu.marius: It's only if you want to use Apps2SD and swap.
Apps2sd and swap
Wysie said:
lupascu.marius: It's only if you want to use Apps2SD and swap.
Click to expand...
Click to collapse
Cyanogenmods newest roms run fastest with a swap and ext3 partition on the sd card. If you run it with just a fat32 and or ext2 you will most likely be running the rom a lot slower than was designed.
fhaines
fhaines said:
Cyanogenmods newest roms run fastest with a swap and ext3 partition on the sd card. If you run it with just a fat32 and or ext2 you will most likely be running the rom a lot slower than was designed.
fhaines
Click to expand...
Click to collapse
is it possible to just create an ext3/ext4 and swap only without using apps2sd? Or do i need a fat32 partition?
If I am not wrong the has to be rooted to apply cm? In which step of this tutorial does the phone gets root?
Nicely done!
A few days too late for me, unfortunately, but it's nice to know that I ended up with essentially the same procedure. My notes are quite a bit more disjointed than your instructions, however.
It'll be a good refresher once it's time to root my wife's phone, however.
Great Resource for noobs and advanced alike
I believe this should be stickied.
Damn you beat me to it. I have been looking for WEEKS on a sure fire way to root my MyTouch 3G. I tried the Relentless Rooter, the Gold Card method and everything else I could find to throw at this thing.
The steps outlined here are slightly different from what I did, but all in all, this is what worked for me, was nice, easy and worked great. The first time you Root a phone it takes a bit to get the process down, but it's not as hard as you think.
If this hasn't been stickied, it needs to be!
Looks good but I have a few questions.
I am currently running on CM 4.1.999 (1.6) and my phone is running very smoothly. I tried 4.1.9999 but it started to bog down and seriously slowed down. I've got quite a few apps and I've got the phone set up as I like it (including changing some of the icons with bettercut and that kind of stuff) I'm getting to the point where I'm a bit loathe to go through all that again, so my question is; what are the real world advantages I might enjoy if I "upgraded" to 4.2?
palexr said:
Looks good but I have a few questions.
I am currently running on CM 4.1.999 (1.6) and my phone is running very smoothly. I tried 4.1.9999 but it started to bog down and seriously slowed down. I've got quite a few apps and I've got the phone set up as I like it (including changing some of the icons with bettercut and that kind of stuff) I'm getting to the point where I'm a bit loathe to go through all that again, so my question is; what are the real world advantages I might enjoy if I "upgraded" to 4.2?
Click to expand...
Click to collapse
Have you tried CM updater? It can be downloaded from the market and should just upgrade your current rom.
Weemoney said:
Have you tried CM updater? It can be downloaded from the market and should just upgrade your current rom.
Click to expand...
Click to collapse
OK, thanks, I thought it had been switched off so to speak after the Google episode.
My main question remains though, are there any benefits? I know, I know, go and look at the thread in the Dream section but still, CM4.1.999 really does work very well on my Magic and I think it deserves representation here.
Allied to a good theme it is by far and away the best ROM for the Magic IMHO.
Im running it now and have no issues. It is very fast and reliable. I think its worth the upgrade.
Right You Are
smurf said:
If I am not wrong the has to be rooted to apply cm? In which step of this tutorial does the phone gets root?
Click to expand...
Click to collapse
You do need to be rooted to apply a CM ROM (or any other 'cooked ROM' I think), HERE is where you are officially Rooted as I understand the process.
psguardian said:
INSTALL
Connect phone to pc via USB
On the phone: pull down the notification bar & press ->USB Connected->Mount
On the pc: copy the FlashRec.apk & the Amon RA recovery.img onto your SD card.
If you don’t have a ‘file manager’ or ‘app manager’ go to the market & download one such as: ASTRO, LINDA, AppManager or the like. Then browse to your SD card & open/run the flashrec.apk to install it. (if asked what to open with choose Package Installer)
Open RecoveryFlash (flashrec) & press Backup Recovery Image.
Once it’s finished press in the text box & clear out the box, then put /sdcard/recovery-RA-dream-v1.2.3.img & press Flash Custom Recovery Image.
Once the flash is complete turn the phone off.
Boot into 'Recovery' like this: Press-&-Hold END/Power AND Pres-&-Hold Home. (this will be a black background with a screen full of options)
Scroll down to ‘part SD fat32+ext2+swap’ press trackball to select.
Once partitioning is complete scroll down to ‘then select convert ext2 to ext3’ press trackball to select.
Reboot phone.
Connect phone to pc after reboot & mount USB storage
Copy the HTC ADP 1.6 DRC83 & CyanogenMod 4.2.2 ROM files onto your SD card then disconnect from the pc & turn off phone.
Boot into 'Recovery', scroll to & select ‘nandroid backup’ & let it complete.
Scroll to & select ‘wipe data/factory reset’ & let it complete.
Scroll to & select ‘apply SD card: choose zip’ and select the HTC ADP file & let it complete (this will take a few min be patient).
Scroll to & select ‘apply SD card: choose zip’ and select the CyanogenMod file & let it complete (this will take a few min be patient).
Once the flash is complete reboot phone (this will take up words of 5min+ be patient).
Once up & running on latest CyanogenMod connect to pc again & unzip the audio-resources.zip onto your SD card.
Click to expand...
Click to collapse
fhaines said:
Cyanogenmods newest roms run fastest with a swap and ext3 partition on the sd card. If you run it with just a fat32 and or ext2 you will most likely be running the rom a lot slower than was designed.
fhaines
Click to expand...
Click to collapse
Quick question, I've followed the procedure posted on here step by step exactly and once I boot the phone up right after the android loading screen it goes to a black screen and sits there for a long time. Here's a thread I started asking for help with this, it has more info on my problem, thanks for anyone trying to help.
http://forum.xda-developers.com/showthread.php?t=578208
Things to check
lupascu.marius said:
Quick question, I've followed the procedure posted on here step by step exactly and once I boot the phone up right after the android loading screen it goes to a black screen and sits there for a long time. Here's a thread I started asking for help with this, it has more info on my problem, thanks for anyone trying to help.
http://forum.xda-developers.com/showthread.php?t=578208
Click to expand...
Click to collapse
Hey,
Couple of things to check and make sure of. You have to be on factory 1.5 before doing the upgrade to the Rooted HTC rom and Cyanogens rom, cannot do this from 1.6. Also, there is a wipe involved in the process, and if its skipped it may account for the FC's. Also there is a fix permission file you can run after installation and initial boot that may help with the FC's, its located in CM's thread in the Dream section where the rom is.
Fhaines
fhaines said:
Hey,
Couple of things to check and make sure of. You have to be on factory 1.5 before doing the upgrade to the Rooted HTC rom and Cyanogens rom, cannot do this from 1.6. Also, there is a wipe involved in the process, and if its skipped it may account for the FC's. Also there is a fix permission file you can run after installation and initial boot that may help with the FC's.
Fhaines
Click to expand...
Click to collapse
Yes, it is on the factory cupcake build when i start to try and install CM. The weird thing is i have had Cyanogenmod for a long time and have been doing upgrades and everything worked untill now. I upgraded to CM 4.2.1 and after that CM stopped working on my phone. I can confirm that 'other' rooted roms do work..so it seems like its just CM. Thanks
lupascu.marius said:
Yes, it is on the factory cupcake build when i start to try and install CM. The weird thing is i have had Cyanogenmod for a long time and have been doing upgrades and everything worked untill now. I upgraded to CM 4.2.1 and after that CM stopped working on my phone. I can confirm that 'other' rooted roms do work..so it seems like its just CM. Thanks
Click to expand...
Click to collapse
Quick update for anyone with any ideas. I finally got it to boot up and it runs great except for two things I've notices so far. When i try to add widgets nothing pops up and when i go to settings the window comes up for half a second then goes away and back to home screen. Now what I did to fix it was partition the sd card which i was told is NOT necessary. Then after i got it to work i tried again with a sdcard that was NOT partitioned and it did the same thing again, black screen no-go. So it seems like if you don't partition the sdcard on some phones the phone freezes at a black screen. Keywords being "some phones". So for anybody who knows how to fix the widget and settings problems not opening, please help me....Thanks
lupascu.marius said:
Quick update for anyone with any ideas. I finally got it to boot up and it runs great except for two things I've notices so far. When i try to add widgets nothing pops up and when i go to settings the window comes up for half a second then goes away and back to home screen. Now what I did to fix it was partition the sd card which i was told is NOT necessary. Then after i got it to work i tried again with a sdcard that was NOT partitioned and it did the same thing again, black screen no-go. So it seems like if you don't partition the sdcard on some phones the phone freezes at a black screen. Keywords being "some phones". So for anybody who knows how to fix the widget and settings problems not opening, please help me....Thanks
Click to expand...
Click to collapse
I don't think it has anything to do with SD partition type. Im running cm with a fat sd. everything's fine.
Nice lil issue...
Once it’s finished press in the text box & clear out the box, then put /sdcard/recovery-RA-dream-v1.2.3.img & press Flash Custom Recovery Image
I dont have this option when i try to flash the .img
it says Download Recovery Image and it is actually grayed out??
Hello everyone i have a problem with my htc hd2 this is my first time flashing my phone and it went smooth until i try to put the rom in my sd card. it always tells me that the zip file is no longer on my computer but out of curiosity i tried ad recovery to see if the zip file is there and it is there but when i try to load the custom rom it says the zip file is (bad) and installation aborted i don't know what to do next
iluuvmochi said:
Hello everyone i have a problem with my htc hd2 this is my first time flashing my phone and it went smooth until i try to put the rom in my sd card. it always tells me that the zip file is no longer on my computer but out of curiosity i tried ad recovery to see if the zip file is there and it is there but when i try to load the custom rom it says the zip file is (bad) and installation aborted i don't know what to do next
Click to expand...
Click to collapse
how are u transferring them? should just copy n paste. do it from CWM (9. ad recovery). go under "mounts and storage". then go down to "mount usb storage" n wait for PC to recognize it. then copy... paste. should work. for additional help youll need explain your whole flashing procedure from task 29 to rom installation. hope this helps
MEG4LOM4NI4C said:
how are u transferring them? should just copy n paste. do it from CWM (9. ad recovery). go under "mounts and storage". then go down to "mount usb storage" n wait for PC to recognize it. then copy... paste. should work. for additional help youll need explain your whole flashing procedure from task 29 to rom installation. hope this helps
Click to expand...
Click to collapse
from magldr i go to (4.usb mass storage) and then when it connects i drag the zip file onto my sd card folder and then it would show that its copying but i after a few minutes it would tell me that it no longer on my computer. im trying to NAND flash my phone and was trying to put hyperdroid but i could not get past the part where i have to put the rom on my sd card oh and every time my sd card folder opens i get this pop up saying "PLEASE INSERT THE LAST DIK OF THE MULTI-VOLUME SET AND CLICK OK TO CONTINUE" and it say on top compressed (zipped) folders
iluuvmochi said:
from magldr i go to (4.usb mass storage) and then when it connects i drag the zip file onto my sd card folder and then it would show that its copying but i after a few minutes it would tell me that it no longer on my computer. im trying to NAND flash my phone and was trying to put hyperdroid but i could not get past the part where i have to put the rom on my sd card oh and every time my sd card folder opens i get this pop up saying "PLEASE INSERT THE LAST DIK OF THE MULTI-VOLUME SET AND CLICK OK TO CONTINUE" and it say on top compressed (zipped) folders
Click to expand...
Click to collapse
so your not using Clockworkmod Recovery then? just flashing directll to NAND?
---------- Post added at 02:16 AM ---------- Previous post was at 01:59 AM ----------
Most newer roms are compatible only with Clockworkmod Recovery (aka CWM or CWR). u must install this after maglr.
Just went over to the OP for hyperdroid v 3.0.1. thats why in the file u downloaded says: Hyperdroid-CWM-v3.0.0-MAGLDR-CWM-ZIP.
*note the bolded abbreviations... means u need Clockworkmod Recovery for this rom to work... not hard just an extra step that i highly recommend
There are roms that dont require this and a few ways around it as well but its easier to just install CWM. like i mentioned before seems most (all the ones ive used in the past ten months) roms are going this route for CWMods added features and benefits
Heres a little guide i cooked up bout an hour ago in another thread to help
I just posted this in another thread to clear some things up for some guys shortly after my first reply to you....guess ya inspired me in a way, hahaha. you might be more concered with steps 5 through 6 seeing as how you already have MAGLDR installed...... hope this clears up the process for you a bit
............................excerpted from previous post........................................
********BTW i have attached a little template that i use when flashing various roms and storing them on my PC. has task29, HSPL & MAGLDR already in it. all u need to do is go to the xda hd2 master radio thread to grab your appropriate radio and put that into the empty radio file. then find the rom you want to test out and usually the developer will have both rom (obviously) and the appropriate CWM that u should use with it and just put those in their respective empty folders i have in the attached file. that way all the steps below will line up to the files i have attached
OH YEAH, FORGOT... THESE STEPS ARE TO BE DONE AFTER THE INITIAL PREREQUISITES i.e. windows mobile device center, activesync, proper spl version...blah blah blah
--------the following steps 1 - 4 are to be preformed while at the tri-color boot screen (easiest way to reach is to turn off your phone while its connected to your PC then immediately hold volume down button till you see it n wait for it to say usb in the white section).
(by the way your device will ALWAYS automatically restart itself after a couple seconds if it is shut down while plugged in via USB to either a wall/car charger or hooked up to a PC this is normal and a small hiccup either due to the use of magldr or the hspl but dont worry)...cant quite remember
1. run task 29
-double click the only icon in file if your using the one provided by doloop
-wait for it to run and do its thing. when its finished it will automatically turn off your device so be sure to hold down the volume key as soon as it does.
2. install radio
-run the "customRUU" file with the HD2 icon in the radio of your choosing
-it will operate in a similar fashion as the task 29, automatically turning off device upon completion.... down on the vol key
3. install hspl3/hspl4
-run the "HSPL3_PKG/HSPL4_PKG" file. should be the only one in there
-make sure you select 2.08.HSPL in the setup and it will execute itself just like the installers in the previous two steps n turn off your phone... down vol key
4. install magldr113
-make sure your selecting "rom update utility" in the magldr113 file. dont run the "DAF" it wont work properly if you do and youll get errors
-BUT THIS TIME AS IT TURNS ITSELF OFF HOLD DOWN THE POWER BUTTON ON YOUR DEVICE AS IT BOOTS UP UNTIL U GET TO MAGLDR AND CONTINUE TO HOLD IT DOWN UNTIL YOU SEE ABOUT 12 DIFFERENT OPTIONS...
5. install CWM recovery
-go to option 5 "USB Flasher" and hit the green call key. wait a few moments till it shows USB....USB make sure the second usb pops up and your PC recognizes the connection. then when it does sync you get to......
-while still in the usb flasher mode above, simply run you desired CWM recovery which should the one your developer recommends for the builds as the requirements tend to vary from rom to rom.
-this is achieved by selecting the "DAF" file from the clockworkmod recovery your using
-and again this installer will shut off your device upon completion and HOLD DOWN THE POWER KEY LIKE ABOVE TILL YOUR BACK AT THE MAGLDR MAIN MENU (with options 1-12).
6. install rom
-go to option 8 "AD Recovery" and hit the green call button to enter into the CWM recovery u just installed
-after it loads up (GO!GO!GO!) go down to the "mounts and storage" option that is third from the bottom and hit the call key.
-once there go to the last option "mount USB storage" and hit the call key.
-give your PC a few moments to recognize the sd card for your device and choose to open it when your PC prompts with the regular file explorer or just find it and double click on the newly recognized drive (sdcard) if your PC doesnt auto prompt you.
-the new drive (sdcard) should be empty (depending...) then just find the desired rom you chose to use, right click on it and copy.....then over to the new drive (sdcard) and paste. might take a min or two depending on the roms size
-once the copying is complete hit the call button to "unmount" your sdcard then the back button on your device till your back at the CWM main screen
-go to the fifth option down and "install zip from sdcard" and hit the call button
-select the second option "choose zip from sdcard" and select the zip file you just copied to your sdcard. then it will begin to install the rom and all rom install times vary by build. some take a minute, some seem like they take forever.
-once installation is complete hit the back button till your back at CWM main screen and choose the last option which is to "power off"
-then tap the power button(if u unplugged it from usb otherwise it wil reboot by itself) to turn on your device and give it some time for the initial boot and load as it has to set up everything u just installed. subsequent boot wont take as long but again it can all vary from rom to rom.
-after initial load and a successful bootup you should arrive at ether the lockscreen or a startup screen. give the rom a few more mins to settle and dont hit any buttons. then unlock the device or skip through the startup options and get to the home screen. maybe give it another min to settle the launcher and the last bit of data and resist the urge to mess with the features. your gonna hate this but hold down the power button and select power off device from the popup menu. i know it sucks but it is best practice when flashing roms. after device shuts off wait a few seconds and turn it back on and let it reboot. should be faster this time and when u get to your lockscreen simply give it a few seconds to settle again, unlock and go to main launcher a wait a couple more seconds for it to finish settling and.....have fun! (every time i restart my device for any reason i will always give it a few moments to finish loading up before just blazing away with the apps)
WOW! maybe its not so abridged after all, but oh well tried my best to be as clear as possible so people can utilize their HD2 to its fullest potential.
HOPE THIS HELPS AND PLEASE HIT THE THANKS BUTTON IF IT HAS
Hello meg4lom4ni4c! you are awesome! thank you so much for helping me and it feels good to know that even though im a noob i still inspire people ahahaha
i was having problems connecting to my pc before but for some reason when i tried it again using the usb port tat the back of my pc it connected and and i put CWM and did what you said to put the zip file on CWM (mounts and storage) and copy and pasted the file and it worked! yey! now the only thing is when i go to market it always forecloses and i don't know what to do to fix it. when i go to market there would be a yellow box on top saying that "this application is not compatible with your phone" and it always forecloses. was wondering if i need task 29 and and radio if i want to change roms and to start it, would i go to the tri color screen and run task 29?
Starting HD2 ANDROID SO FRESH N SO CLEAN!
iluuvmochi said:
Hello meg4lom4ni4c! you are awesome! thank you so much for helping me and it feels good to know that even though im a noob i still inspire people ahahaha
i was having problems connecting to my pc before but for some reason when i tried it again using the usb port tat the back of my pc it connected and and i put CWM and did what you said to put the zip file on CWM (mounts and storage) and copy and pasted the file and it worked! yey! now the only thing is when i go to market it always forecloses and i don't know what to do to fix it. when i go to market there would be a yellow box on top saying that "this application is not compatible with your phone" and it always forecloses. was wondering if i need task 29 and and radio if i want to change roms and to start it, would i go to the tri color screen and run task 29?
Click to expand...
Click to collapse
well what the task29 does is pretty much whipe your whole devices NAND (internal) memory. it wont wipe your radio or the HSPL. it takes care of wiping the rest of the space (MAGLDR and CWM).
so your options are as follows:
-try fix permissions trough CWM
-wiping davlik cache (helps clean up issues with apps n such possibly your market situation, but this could be largely due to the type of rom your using as well as none are perfect...some are really close)
or start fresh to minimize chances for errors and force closes
do this by restarting your device into CWM
-in CWM execute the following commands in the following order (this is a little overkill but better safe than sorry i suppose).
at main CWM screen
-wipe data/factory reset
-wipe cache partition
then at main CWM screen go under "mounts and storage"
-format /boot
-format /cache
-format /data
-format /sdcard
-format /system
-format /sd-ext (only if u made one)
then back at main CWM go under "advance"
-wipe davlik cache
-can also find fix permissions here if needed i personally havent used this much(but maybe i should be every once n awhile...might be good practice)
at this point your ready to start at step one in my guide two posts up....run task29 at tri-color boot screen and so on and so on
*********Please note that the use of CWM is essential for most current builds that utilize a rom-zip format. not sure about sd card builds as i havent used them. i came into the hd2 flashing game right when they got it to run solely out of NAND. just seemed like a better way to do it to me but i could be wrong
hope this helps and lemme know if everything worked out for you. also include the rom you are attempting to install for further assistance. and also corrections are always welcome as i am definitely no developer just have a knack for nerdy stuff (sometimes)
Hi!
so i was reading your post very carefully coz i don't wanna mess up and panick and mess up even more LOL im just gonna go ahead and do cwm wipe and format first but how do i go to cwm screen from my phone and do i have to be connected to my pc?
i downloaded task29 the repack by shadrac one but could not decide which radio to get..any advice? and as for the rom i really don't know what rom im gonna get because i just started flashing my phone but if you have any suggestions i would very much like to hear it the rom im using right now is "Hyperdroid-CM7-v2.1.0-HeadyHoneyBadger" and it works good except the market, it just keeps foreclosing i really like cyanogenmod but i think there is a lot of different kinds so i really don't know which one is good.
Thank you so much for taking the time to help me YOU are really AWESOME!!!
iluuvmochi said:
Hi!
so i was reading your post very carefully coz i don't wanna mess up and panick and mess up even more LOL im just gonna go ahead and do cwm wipe and format first but how do i go to cwm screen from my phone and do i have to be connected to my pc?
i downloaded task29 the repack by shadrac one but could not decide which radio to get..any advice? and as for the rom i really don't know what rom im gonna get because i just started flashing my phone but if you have any suggestions i would very much like to hear it the rom im using right now is "Hyperdroid-CM7-v2.1.0-HeadyHoneyBadger" and it works good except the market, it just keeps foreclosing i really like cyanogenmod but i think there is a lot of different kinds so i really don't know which one is good.
Thank you so much for taking the time to help me YOU are really AWESOME!!!
Click to expand...
Click to collapse
Hmmmm where to start....
You were in CWM when u copied the rom to the phone... remember? to get there turn off device then restart it while holding down the power button to get you to MAGLDR. Option 9. AD Recovery = ClockworkMod Recovery (aka CWM or CWR) in there is where u use my little wipe/fresh install guide
The version of Hyperdroid your using is from a months ago. Pongster has released v.3.0.0 "the insightful impala" with a hotfix to version 3.0.1. I would recommend using that as most of your market issues will be addressed i would imagine.
i attatched a file in my previous post... download it. it comes with the task29(provided by doloop), HSPL3, and MAGLDR113 that i use. the lil guide i posted follows how i have the files in the "HD2 rom template" arranged. if you unzip the attached file (use 7zip,winrar....etc) youll see files labeled 1-6 (1.task29 2.radio 3.HSPL 4.MAGLDR 5.CWM 6.ROM). the radio file is empty because i was unable to compress it enough to include it( there is a 8mb attachment limit ) The CWM file and rom file are blank as well because both will vary from build to build.
if u use my attachment as a kind of template it will make the steps easier to go thru thats why they are numbered
to get the appropriate radio on xda type a search for "radio master thread" and open the post. there you will see a bunch of different radios. BE CAREFUL SOME MIGHT BRICK YOUR DEVICE!!! read the post it explains which ones not to use i believe. the one i use and have noticed a lot of others use is 2.15.50.14.... has always worked for me. download it and put it in the empty radio file in my template.
now go back to Pongsters hyperdroid cm7 OP and download both the version 3.0.0 and also download the v3.0.1 hotfix and put both of the zip files in the empty rom folder.
in Pongsters second post he has the CWM for you that youll need if you already dont have it (its on step three of his little guide on his second post) download and put that in the empty CWM file in the template.
now that you have all the files you need and in a nice tidy order.... reflash time!!!!
follow my "fresh install/wipe/format procedure" in my previous post then use my install guide post afew posts up and follow it using the lil template i provided and that u put the radio,CWM,rom & hotfix into
notice how the 1-6 steps in my install guide follow the 1-6 on my "HD2 rom template" attachment?
******oh yeah when u get to the installing the rom step only install the v3.0.0 zip via CWM first and follow the recommended new rom startup section at the end of my lil guide. make sure the rom has had plenty of time to settle and everything like it says n go ahead and play around with it a little and try it out. but then after u rebooted it a couple times like it says reboot it a third time into CWM and go to the install zip from sdcard option and go in and install the hotfix(sorry i tend to repeat myself sometimes)
lemme know how it goes and have u tride Tyweens rom??? Its pretty good itself in case your not crazy about the Hyperdroids' minimalistic and monocrome look. Both are great though.....
---------- Post added at 01:36 PM ---------- Previous post was at 01:31 PM ----------
oh yeah go to www.android.hd2roms.com for a site i use that someone made that kinda keeps track of most of the HD2 roms floating around on xda. its pretty acurate and gets updated constantly. help u see most of the flavors of android on the HD2.
YEY!
YEEEEEEEEY! IT WORKED! you are AWESOME! thank you so so so so so much! if it wasn't for your guidance i wouldn't be able to understand it! i did all the stuff you told me and it worked! i didn't have any problems while flashing my phone! did i say thank you already? THANK YOU!!!!!
and thank you for all the links that you suggested it was really helpful! thank you thank you thank you!!
Based on the original guide that helped me get here: http://forum.xda-developers.com/showthread.php?t=2109041 Hope he doesn't mind but i also copied and pasted all the repeated process parts but hugely modified everything else ( MT6577 MTK MTK6577 MTK6XX MT6XX )
Purchase this phone HERE
Note: This will fix ANY broken H2000+ camera If your rear camera has stopped working with any other firmware, this one will work don't worry about clearing any cache / data / dalvik or anycrap, just follow this guide!
HERO H2000+ Rooting
Here is a new ever safer solution on how to root the "unrootable" Hero H2000+
WHAT ARE WE GOING TO DO?
(Main Modification)
Well in this mod it will remove the android IOS theme or normal unrootable android firmware that comes with the stock phone, most will find out when you try and root the stock it only gives it a partial root ( no access to /system ) or just ends up screwing the camera if you finally do figure it out, i've combined about 10 different mods i've found around the web over the last 3 days of selective google keyword searching to combine it into this simple mod, i haven't done much myself except Modded the scatter installation to include CWM and i created the .zip file that removes the bloatware and adds SuperSu.
(optional Modifications)
- Swap sdcard with sdcard2 (fix application saving options for he external card
- Remove the 3 onscreen buttons and remap the Top side mute key into a back button for a better screen view and more authentic iphone style use.
Make sure you DOWNLOAD THIS first, It's the most vital part and has almost everything you will need, in one whole simple file, to achieve what i'm going to show you how to do, I'm going to try and include lots of detail so listen up, any sources & links from places i got most my information & downloads from will be included at the bottom of this page, if you are interested.
Warning! This is at your own risk,i am not responsible for any damage this may do to your device and always backup before ( Seriously don't complain about it to me, i never took any precautions when playing around and my device is fine but i'm sure there are risks of breaking your device.
Warning: Pretty sure this deletes anything on the phone's Internal SD / Phone storage and system storage, but the external SD card should be safe, but i'd still back it up incase but mine was left untouched, if not i'd of lost about 20GB of music so it's your call.
1. Download the file provided, you should have the following files:
- Folder: 2000+ SUPER ROOT SUROOT SYSTEM ACCESS
- Folder: PHONE DRIVERS MTK MT6577
- Folder: SP_Flash_Tool_v3.1220.01 VERSION 1
- Zip: MTK_Drive.zip
2. How to install the correct drivers are included in the MTK_Drive.zip + the MTK MT6577 driver folder, the drivers are for when the device is just started up with USB plugged in, for when it's in a flash mode, it will be detected as MTxx or something on the driver installation window, you don't have to worry too much about this until you start flashing and it will pop up the first time you attempt to flash with "installing drivers" message, the 2nd time it SHOULD flash but it took me about 30x when i first started, so yeah good luck with that.
3. COPY THE "COPY ME TO THE 2GIG INTERNAL SD NOT EXTERNAL.ZIP" to the internal sd card before or after the flash (BEFORE WOULD BE BEST) via USB on the phone when it's booted, if you're using the H2000+ phone it will be the storage with 2GBish.
4. OK lets begin, Open folder "SP_Flash_Tool_v3.1220.01 VERSION 1" right click on Flash Tool.exe run as Admin, Then click on "Scatter-loading", then in the browsing folder open "2000+ SUPER ROOT SUROOT SYSTEM ACCESS" and load the "MT6577_Android_scatter_emmc.txt" then click download, if any messages pop up just click yes or ok,
then on your phone PLUG IN THE USB hold the power off button CLICK RESTART and the tool should detect the phone and install the files on the 2nd - 3rd time +, You will know when you have achieved this by a BIG GREEN circular ok Message
5. Now you should have the rom installed with superuser root and CWM all included in one flash ( Your welcome ), turn on your phone holding the power button + the Volume Up button.
6. Click install zip from sdcard - choose zip from internal sdcard - COPY ME TO THE 2GIG INTERNAL SD NOT EXTERNAL.zip install and BOOM done (PART 6 ISNT ESSENTIAL BUT...) it removes a lot of Chinese bloatware crap from the phone, replaces superuser for SuperSU which i prefer myself, and installs a few apps i like to have. and you are done, information on what below.
QUICK INFO
once done i can't remember but i'm sure i removed all the crap, slow, process hogging, battery **** eating apps! So you WILL need to download like a browser, media player, etc...
My favorites for this phone are:
GOOGLE MUSIC PLAYER
CHROME
EXPLORER (Free root explorer)
Titanium Backup (Good to delete system apps safely)
WEATHER & CLOCK accuweather (INCLUDES WIDGET SUPPORT)
Paid apps:
Camera MX
Keyboard (swiftkey)
I SUGGEST remove the **** launcher (But first download this beautiful life saving launcher) once you install that use Titanium Backup to uninstall the old launcher and this will maximize your battery.
Followed up by THIS THEME makes it look nice and sexy
or combine these
ILauncher (best on market from what i've tested )
Iphone Notifications (Adds more authentic iphone notifications)
Related guides:
How to unbrick your device: http://forum.xda-developers.com/showthread.php?t=1943442
Sources:
Chinamobile page ( need to register to download) Pages 1 - 5 is where i found some downloads
http://www.4shared.com/rar/BCwt0zz_/Taiwan101_Hero-H2000_CWM_Recov.html - this was the first rom i found with good root but breaks rear camera.
http://www.daten-hoster.de/file/details/388840/Recovery.zip
http://www.android-hilfe.de/tags/hero h2000+.html
http://4pda.ru/forum/index.php?showtopic=384509&st=140&p=16917723&#entry16917723
http://chinamobiles.org/downloads.php?do=file&id=760 - main rom i modded i think
http://www.4shared.com/rar/GXGsjWuQ/zopo_USB_Drivers.html
Other tutorials i made:
http://forum.xda-developers.com/showthread.php?p=37729457#post37729457
OTHER FILES:
COPY ME TO THE 2GIG INTERNAL SD NOT EXTERNAL.zip
HERO H2000+ Rooting (OTHER MODS)
Sdcard2 to sdcard1 permanent mounting swap mod guide below
This guide is useful so your external sd card you have to physically put into the mobile your self will be able to be used as a storage for apps to be installed directly to, which is normally only possible if you use annoying apps like app2sd which are just a huge inconvenience.
ANYWAY right click this file and save it onto your phone or computer to copy to your phone http://www.cactuz.net/files/zp100/vold.fstab
once you load up your phone using a file manager with root permissions copy the file and replace it with the one installed onto the phone.
(SYSTEM/ETC/VOLD.FSTAB)
restart your phone and you're done!
edit:
Just added the VOLD.FSTAB into a .zip incase it's removed in future.
Here or attached at bottom also
---
Remove 3 button virtual keys + use mute key as back (the key above the volume keys)
This will help you have a bigger screen view, more authentic iphone feel, and basically remove useless buttons.
Steps
1. First download ((THIS)) or the attached KEYREMAP.zip at the bottom of this post.
2. attach your phone via USB then copy the KEYREMAP.zip to your phones sdcard.
3. Unzip the file there you will get a folder called KEYREMAP, once you have done that inside that folder there will be 2 more folders
- MODDED (COPY AND PASTE THE SYSTEM TO SYSTEM)
- ORIGINAL (COPY AND PASTE THE SYSTEM TO SYSTEM)
-Disconnect your phone now.
4. Using an explorer (explorer or rootexplorer on your phone) go to the folder MODDED (COPY AND PASTE THE SYSTEM TO SYSTEM) then copy the folder "system" to the folder "system" at the main (ROOT) directory of your phone and replace the already exisiting files.
5. restart your phone and you are done
edit: Changed modded keymap due to system drop down menu button disappearing, fixed so now you can have a drop down menu button and still remove the 3 virtual buttons at the bottom
Sources:
http://forum.xda-developers.com/showpost.php?p=34865298&postcount=11 - REMOVE 3 BUTTON GUIDE
http://forum.xda-developers.com/showpost.php?p=9399440&postcount=1 - KEYREMAPPER TOOL TO HELP CHANGE MUTE KEY
INFO: /system/usr/keylayout/mtk-kpd.kl / MUTE key = key113 / system\build.prop / ro.bird.control.naviBar=true - persist.sys.naviBar=true - ro.naviBar.height=54
Does this wipe my phone
Will using this method wipe anything on my phone???
When i did it anything on the external sd card was safe, everything else got nuked
Hi !!
This guide seems to be the one I was waiting for (I've already managed to root my H2000+ but I don't have RW access to /system)
Download link is soooo slow any mirror on Dropbox or faster download sites ?
Thanks !
I installed the SUPER ROOT SYSTEM ACCESS with SP Flash tool and all is OK !!
Root with Read/Write access for /SYSTEM
Thanks a lot
this has not wipe my phone ! I still have my apps and my launcher (ilauncher) installed
Back camera is still working too
It's not that bad, i added some more mods i think i'm done now, got everything i wanted to do to my phone, hope this guide helps people and me incase i forget or lose these mods in future, which is the main reason i did it :')
it works,
lol this may sound stupid but yeah,I did the root and it was successful but the screen flickers badly now,i need some help.
did you try to wipe data/factory/dalvik caches and reinstall the Rom + root procedure ?
I worked nice for we without any problem
Maybe you have a specific version of the H2000+ with some weird video drivers ? new device out of the factory with new hardware ?
Hmm ok,I'll try that,if I do all those wipes would things in my phone memory dissappear?lol(just started this stuff).Yeah probably its my hardware,I dont think its the root either.Thanks anyways.
regis59 said:
did you try to wipe data/factory/dalvik caches and reinstall the Rom + root procedure ?
I worked nice for we without any problem
Maybe you have a specific version of the H2000+ with some weird video drivers ? new device out of the factory with new hardware ?
Click to expand...
Click to collapse
Finally i Rooted
Hello my friends.
After one month on trying at my free time finaly today i rooted my H2000+.
I did not lost anything from my contacts or programs that i had before. My Wifi,Camera - front and back,Bluetooth are working fine.
The only think that hapens different today, was that when i did load the Scatter file in flash tool then his screen filled with lines of files that it going to use. All the other times that i was trying to falsh my phone there was only the line with the Scatter file. I do not know why but all the other times the loading of the Scatter file from the flasher was unsuccessful.
Thanks a lot.:good:
So the link you posted from dino direct the phone is out of stock from them anyways, however there is a phone the Changjiang A5000 it seems to be the identical model just different name to the Hero 2000+ I have seen around it's suppose to be the upgraded model of the H2000+ not sure what true is there about that, but it it possible in your opinion that this root method may work? Theoretically that is if everything is the same. I don't have the phone yet but when/if I do i will see if i can disassemble a little to see if i can find similar markings to the H2000+
Hi.
I followed the tutorial to root my hero h2000+ phone and the key remapping tutorial. The root tutorial worked fine for me but the key remapping one not. When i remap the keys, home button just doesn´t work as intended, it looks like it works as DPAD_UP and the MUTE button(original mapping) just doesn´t do anything. I tried Keynumbertracker to know the key numbers and change the mtk-kpd by myself but i totally messed up and had to go back to original config . If anyone can help me, please these 3 buttons are hurting my eyes!!!
(sorry about my english )
Hello, this method is valid for this kernel?
(Kernel: Linux 3.0.13 vers test @ test-virtual-machine # 1 SMP PREEMPT Thu Dec 20 20:41:06 CT 2012)
thanks¡¡
So I would like to say that this does in fact work for the changjiang a5000 phone, the custom modded zip as well, seems the changjiang is identical as i thought it might be
Can anyone confirm this working on the Changjiang A5000?
Compatible?
Does this guide works with Windows 8? - Because i've tried rooting once and somehow my speakers were screwed up and I had to sent it back for repair o__o''
Also which Android version is this? Still 4.0.4? - Because I heared this Android version has a bug of running the battery low much faster than normal :/.
very nice rom and tutorial
liamguest said:
HERO H2000+ Rooting (OTHER MODS)
Sdcard2 to sdcard1 permanent mounting swap mod guide below
This guide is useful so your external sd card you have to physically put into the mobile your self will be able to be used as a storage for apps to be installed directly to, which is normally only possible if you use annoying apps like app2sd which are just a huge inconvenience.
ANYWAY right click this file and save it onto your phone or computer to copy to your phone http://www.cactuz.net/files/zp100/vold.fstab
once you load up your phone using a file manager with root permissions copy the file and replace it with the one installed onto the phone.
(SYSTEM/ETC/VOLD.FSTAB)
restart your phone and you're done!
edit:
Just added the VOLD.FSTAB into a .zip incase it's removed in future.
Here or attached at bottom also
---
Remove 3 button virtual keys + use mute key as back (the key above the volume keys)
This will help you have a bigger screen view, more authentic iphone feel, and basically remove useless buttons.
Steps
1. First download ((THIS)) or the attached KEYREMAP.zip at the bottom of this post.
2. attach your phone via USB then copy the KEYREMAP.zip to your phones sdcard.
3. Unzip the file there you will get a folder called KEYREMAP, once you have done that inside that folder there will be 2 more folders
- MODDED (COPY AND PASTE THE SYSTEM TO SYSTEM)
- ORIGINAL (COPY AND PASTE THE SYSTEM TO SYSTEM)
-Disconnect your phone now.
4. Using an explorer (explorer or rootexplorer on your phone) go to the folder MODDED (COPY AND PASTE THE SYSTEM TO SYSTEM) then copy the folder "system" to the folder "system" at the main (ROOT) directory of your phone and replace the already exisiting files.
5. restart your phone and you are done
edit: Changed modded keymap due to system drop down menu button disappearing, fixed so now you can have a drop down menu button and still remove the 3 virtual buttons at the bottom
Sources:
http://forum.xda-developers.com/showpost.php?p=34865298&postcount=11 - REMOVE 3 BUTTON GUIDE
http://forum.xda-developers.com/showpost.php?p=9399440&postcount=1 - KEYREMAPPER TOOL TO HELP CHANGE MUTE KEY
INFO: /system/usr/keylayout/mtk-kpd.kl / MUTE key = key113 / system\build.prop / ro.bird.control.naviBar=true - persist.sys.naviBar=true - ro.naviBar.height=54
Click to expand...
Click to collapse
very nice rom and tutorial.I´ve installed rom everything good except the rear camera photos are blurry. Do you know how to fix?
Best regards
rt1010 said:
very nice rom and tutorial.I´ve installed rom everything good except the rear camera photos are blurry. Do you know how to fix?
Best regards
Click to expand...
Click to collapse
Personally friend, the camera is dirt, It might be 8MP but it's the lowest standard sorry. I only really got this phone because of it being super light weight so i could jog and stripped it off programs just about last a days use.
Work for me
liamguest said:
Personally friend, the camera is dirt, It might be 8MP but it's the lowest standard sorry. I only really got this phone because of it being super light weight so i could jog and stripped it off programs just about last a days use.
Click to expand...
Click to collapse
Many Thanks
It work for me, now my back camera work again! and root.
Thanks
Do you have a IOS rom that work with this guide?
Starting about two weeks ago, Google Maps app would begin launching itself periodically after opening any new apps. Then I started getting a notice when Hangouts was trying to update that "The package file is invalid" or something like that. That eventually became apps never finishing updates. This is especially noticeable with Google apps (Hangouts, Newsstand, Play, etc); they get to some percentage of completion and then just stop. (The percentage ranges between 37% [Newsstand] and 91% [Chrome]).
Cleared the Play Store cache and data and attempted to reboot, but the device would not shutdown. It cycled through the various shutdown prompts, then the shutdown spinning icon appeared.... and it stayed like that until the battery drained. Re-started after charging, nothing was fixed. Tried shutting down again, same problem. The only way it becomes responsive again is to hit the little hard reset button.
Did a full hard reset to factory spec, none of the apps will download updates at all. And when the device is fully booted I get a barrage of error messages saying that various Google apps/services have stopped working. (i.e. "Unfortunately, Google Maps has stopped working." or "Unfortunately, Google Play Services has stopped working.")
Device is a stock 32gb TF700T running I think 4.2.1 JB, with a 32gb SD card to which nothing has been written.
What do you mean by you did a "full hard reset"?
First, copy all data you don't want to loose off the tablet.
Then you can try to clear cache and data on everything Google. Go to Settings > Apps, swipe until you see All, then go to town: Maps, Hangouts, Services framework, Chrome, Play Store - the works.
Then go to Settings > Accounts and remove your Google account.
Reboot.
If it still hangs, try holding Power and Volume Down button together until the tablet boots into the bootloader menu.
You'll see 3 icons. Push Volume Down until "Wipe Data" is highlighted. Then press Volume Up.
It should reboot once it's done. If it returns you to the bootloader menu, use Volume Down to cycle to the Android, then hit Volume Up to boot the system.
If all that does not do it, you can manually reflash the Asus firmware or - even better - unlock the bootloader and flash a custom rom.
First, thank you for taking the time to reply. I appreciate the help.
And for what it's worth, the problem as evolved since I posted this; now, as soon as I power or wake up the device and enter my PIN, I start getting error massages that a variety of Google services have stopped working. Always Maps first.
berndblb said:
If it still hangs, try holding Power and Volume Down button together until the tablet boots into the bootloader menu.
You'll see 3 icons. Push Volume Down until "Wipe Data" is highlighted. Then press Volume Up.
It should reboot once it's done. If it returns you to the bootloader menu, use Volume Down to cycle to the Android, then hit Volume Up to boot the system.
Click to expand...
Click to collapse
This is what I meant by 'full hard reset'. Apologies for using confusing or incorrect verbiage.
berndblb said:
First, copy all data you don't want to loose off the tablet.
Then you can try to clear cache and data on everything Google. Go to Settings > Apps, swipe until you see All, then go to town: Maps, Hangouts, Services framework, Chrome, Play Store - the works.
Then go to Settings > Accounts and remove your Google account.
Reboot.
Click to expand...
Click to collapse
Okay, gave this a try. Still would not shut down on its own, and I had to hit the little reset button on the side. Got back in, added one Google account, attempted to update apps, and I get an error saying: "Update for [app name] could not be downloaded due to an error. (Error retrieving information from server. [RPC.S-7:AEC-7])" So I deleted that account and added another one. This time the Play Store wouldn't even show me the installed apps. White screen, spinning circle of sadness.
I don't know if this makes a difference, but I did not indicate in my original post that I have three different Google accounts on this device. But only one of them is the one used for downloading apps to this device.
If removing anything Google doesn't help, I would start fresh: Reflash the firmware following the steps under Alternative Install Method here: http://forum.xda-developers.com/showthread.php?t=1755576
Then set it up again with just one Google account. That should do it.
berndblb said:
If removing anything Google doesn't help, I would start fresh: Reflash the firmware following the steps under Alternative Install Method here: http://forum.xda-developers.com/showthread.php?t=1755576
Then set it up again with just one Google account. That should do it.
Click to expand...
Click to collapse
I attempted to reflash using the steps outlined at that URL, but to no avail. The update isn't recognized (perhaps because I'm already on that build number?), and the rar file does not launch.
At this point, I have two options: Install a custom ROM (can't really hurt, right?), or just get a new device. Considering ASUS is not updating the firmware anymore, meaning 4.2.1 is the highest OS version I'll ever run on it, I'm sort of leaning towards a new device. But I'll try flashing a custom ROM and see what that gets me.
tifosi77 said:
I attempted to reflash using the steps outlined at that URL, but to no avail. The update isn't recognized (perhaps because I'm already on that build number?), and the rar file does not launch.
At this point, I have two options: Install a custom ROM (can't really hurt, right?), or just get a new device. Considering ASUS is not updating the firmware anymore, meaning 4.2.1 is the highest OS version I'll ever run on it, I'm sort of leaning towards a new device. But I'll try flashing a custom ROM and see what that gets me.
Click to expand...
Click to collapse
You will need to unlock the bootloader. This can only be done with the app from asus. Then you must install a recovery. I recomend twrp 2.7.1.1 or philz touch recovery. If you want to stay stock flash sbdags's asus stock rooted rom. If you want stock, but with better performance, then flash CROMi-x. If you want the latest version of android and the new zen ui apps, flash CROMBi-kk, then my asus apps 2.0. If you want asus apps, you will have to wait till monday, the current releace has some issues.
tifosi77 said:
I attempted to reflash using the steps outlined at that URL, but to no avail. The update isn't recognized (perhaps because I'm already on that build number?), and the rar file does not launch.
At this point, I have two options: Install a custom ROM (can't really hurt, right?), or just get a new device. Considering ASUS is not updating the firmware anymore, meaning 4.2.1 is the highest OS version I'll ever run on it, I'm sort of leaning towards a new device. But I'll try flashing a custom ROM and see what that gets me.
Click to expand...
Click to collapse
.rar file??? Where did you get that from? The Asus firmware downloads as a zip (which contains the zip to be renamed). The ecovery will not flash a rar file...
You need to outline the exact steps you are taking. Somewhere you are making a mistake...
berndblb said:
.rar file??? Where did you get that from? The Asus firmware downloads as a zip (which contains the zip to be renamed). The ecovery will not flash a rar file...
You need to outline the exact steps you are taking. Somewhere you are making a mistake...
Click to expand...
Click to collapse
Pardon, I misspoke. I downloaded this zip file: www . asus . com /Tablets_Mobile/ASUS_Transformer_Pad_Infinity_TF700T/HelpDesk_Download/ V10.6.1.14.10 Only for US SKU (Android 4.2.1)
Unzipped the zip within the zip and copied that to the microSD card. Inserted the card into the tablet and nothing happened. Restarted the tablet, nothing happened. Same problems persist.
tifosi77 said:
Pardon, I misspoke. I downloaded this zip file: www . asus . com /Tablets_Mobile/ASUS_Transformer_Pad_Infinity_TF700T/HelpDesk_Download/ V10.6.1.14.10 Only for US SKU (Android 4.2.1)
Unzipped the zip within the zip and copied that to the microSD card. Inserted the card into the tablet and nothing happened. Restarted the tablet, nothing happened. Same problems persist.
Click to expand...
Click to collapse
If you use a microSD you have to rename the zip and boot into recovery.
Rename the ...user_ xxxx.zip to
EP201_768_SDUPDATE.zip
Copy it to the microSD, then boot to recovery with Power and Volume Down buttons and press Volume Up on the flashing RCK icon. That should do it.
berndblb said:
If you use a microSD you have to rename the zip and boot into recovery.
Rename the ...user_ xxxx.zip to
EP201_768_SDUPDATE.zip
Copy it to the microSD, then boot to recovery with Power and Volume Down buttons and press Volume Up on the flashing RCK icon. That should do it.
Click to expand...
Click to collapse
Okay, the instructions did not say to rename the file or to boot into recover.
I don't have the tablet with me today, so I will try this when I get home. Thank very much you for your help.
Followed instructions. Got notice that the update was starting, then instantly I get a prostrate android with his chest panel opened, a red triangle with an exclamation point and the word 'Error!' underneath. The device is now completely unresponsive in this condition, reacting only to holding the power button down until the device restarts.
Ok, halfway there.
The recovery sees the zip file but fails to open it. Either because it became corrupted during download/unzip or because it's named incorrectly.
You can just reboot by long pressing power from the dead Android screen btw - no harm done.
Recheck your steps.
You download the Asus firmware (file name contains "UPDATELAUNCHER")
You unzip that file ONCE, resulting in a file name that has "user+firmware version" in it.
You rename that "user" file to EP_201_768_SDUPDATE.zip (caps do matter).
Make sure Windows is showing the file extensions! In Windows Explorer - does it show the file's extension?
Do you have "Document" or "Document.doc", "Picture" or "Picture.jpg"?
If Windows adds file extensions automatically you may have named the file ....SDUPDATE.zip.zip
Okay, windows is not automatically adding the extension (I get the deleted file extension warning if I omit it and try to save with the suggested file name). The file name in the last two posts are different (one with an underscore between the EP and 201 and one without), and I've tried it both ways and I'm getting the same result regardless. And I've downloaded the rom update file fresh from the ASUS website, and I'm still ending up in the same place. Broken Android.
Just to clarify, when I download the original "UPDATELAUNCHER" file, my steps are to unzip that file, extract the zip file within, and rename that to EP_201_768_SDUPDATE.zip. Put that on the microSD card root, insert that into the TF700T, start in recovery (PWR+Vol down), select 'RECK' (I think that's what it reads) and hit Vol up, and it should take care of itself after that. Yes?
tifosi77 said:
Just to clarify, when I download the original "UPDATELAUNCHER" file, my steps are to unzip that file, extract the zip file within, and rename that to EP_201_768_SDUPDATE.zip. Put that on the microSD card root, insert that into the TF700T, start in recovery (PWR+Vol down), select 'RECK' (I think that's what it reads) and hit Vol up, and it should take care of itself after that. Yes?
Click to expand...
Click to collapse
Your card is FAT32 formatted?
Okay, I managed to miss the instruction to use the alternate method and so had not formatted the microSD to FAT32.
Formatted to FAT32, re-ran the steps and apparently the update took..... in part. I am no longer getting the same bevvy of 'Unfortunately [Google process] has stopped.' messages as I was before. But when I launch Google Play Store app, the 'Unfortunately...' message appears immediately. None of the other Google apps present this problem, but of course many of the 'problem' apps from a few weeks ago are not on the device by default. And with Play Store constantly crashing, there's no way for them to get on the device.
So the device works.... but no apps can be downloaded or updated.
Okay, I just did another factory reset. Can launch Play Store.... but no apps will update. I get an error saying "Update for [app] could not be downloaded due to an error. (Error retrieving information from server. [RPC:S-7:AEC-7])" A trip to the Google Box indicates that this might be a problem on Google's end, and is account related. Si?
Okay, sorry to be shotgunning the thread..... the error message appears to be account-specific. I've signed in using a different Google account, and everything appears to be fine and dandy when using that account as the primary for the device. I've added the 'problem' account, and it seems to be going smoothly. Just updated something like 40-odd apps without incident.
Thanks for the help!
Hey guys,
Some friends and I are having an issue that I can't find another thread for. We have completed the following:
Developer options, USB Debugging enabled and boot-loader unlocked.
In "Download Folder", which I'm viewing through the stock Google Files application, as well as Simple File Manager (F-Droid).
Mgisk-v21.4.zip
MagiskManager-v8.0.7.apk
Lineage-17.1-20210123 nightly.
I've tried several videos now, but all are saying pretty much the same thing from TWRP: Click install, go to your downloads folder (which appears within sdcard/Download), select Magisk zip file, swipe right to flash it. Simple right?
Problem1: From the TWRP Download folder (or it contents are not appearing within /sdcard or anywhere else.
Problem2: I cannot make a backup copy for restoration.
Bonus: Does anyone know how to boot strait into TWRP without using a PC? Its not that big of a problem, as long as I'm at home.
Thanks in advance for your help!