Hi guys, that's my first theard.
I installed CM13 a few days ago, the 20160102 nightly, but its didn't like me so much, my past ROM Slimsaber 5.1 had more features so I preferred it, and today restored my backup from that ROM.
It boots well but when finished to configure all apps it reboot into bootloop, i tried to wipe cache/data but nothing happened.
Then I tried to flash the firmware that I was using (BRAZIL 5.1 retail) and it flashed ok, with no problems. But when I reboot it stays in "bootloader unlocked" image. I tried to flash it again and didn't stay at the "bootloader unlocked" image, but its shows me a screen with a broken Android with the phrase "No command" and immediately disappeared, and then again, like an infinite loop. I don't know if this is useful but, when I turned off the phone to restore the backup I did it with the advanced Reboot menu into Recovery, is it related?
I know that it said, in the CM13 theard that IT CAN NOT BE DOWNGRADED, so I did the backup with TWRP, but I don't know why it bricked. Also I though it could be downgraded by flashing.
Thank you. I hope you can help me!
If you need some info about my phone please request it.
PD: Sorry for my bad English, is not my native languaje.
Edit: Now I connected it to my PC in bootloader mode, and force a reboot with fastboot and its shows the screen with a broken Android and the phrase "No command" and immediatly dissapered, cause if I try to "Normal Powerup" in the bootloader mode its shows the white screen of the unlocked bootloader.
Edit 2: Also I tried to install TWRP, and when I reboot with fastboot, the phone goes directly to TWRP, so I think is bugged or something, since I did reboot to recovery in marshmallow.
Have u fixed ur Moto G ?!
Related
Hi everyone,
I recently rooted my moto g and installed TWRP. The next day I get notifications saying that there is an update available and I downloaded it and installed it. The phone proceeded to shut down and install the update, but rather than the Android logo with the blue bar as I expected a long string of messages came from TWRP and I was dumped at the TWRP home screen. So when I reboot my phone the update hasn't installed and I was still being pestered by pop up messages to install the new update. So I came to the conclusion to un-root, install the stock rom as shown in the video "Flash your Tesco Moto G To Stock" by AndroidAndyUK.
I thought I should install the update without a recovery. The only problem is that when I go to install the rom like in the video, something goes wrong i guess and once its finished the "Bootloader Unlocked" white screen with red writing appears to go into an infinite boot loop. I flashed TWRP and wiped cache and everything then tried re installing the rom numerous times. At the fastboot screen three key things show in purple writing rather than yellow like in the video, which are:
version downgraded for primary_gpt
version downgraded for tz
version downgraded for boot
I can flash TWRP from ADB in my C drive but its not recognized by the command "adb devices".
At the moment I have an unusable phone and I would really appreciate any advice on the topic.
At the moment I have an unusable phone and I would really appreciate any advice on the topic.
Thanks very much.
Do not flash gpt.bin
Do not flash motoboot.img
Flash the rest as usual.
Hey, I'm a new user at android and recently i try to install a new custom rom to my moto g...
But then it was when all went wrong. First the device was taking ages to wipe data (even after several reboot's), then i gave up and reinstalled the twrp custom recovery again... And now i can´t do anything with the phone... It's stuck on "warning bootloader unlocked" sign, and when i enter twrp recovery and try to wipe again says "unable to mount /system."
I've tried to reinstall stock firmware but it didn't work... I forgot to say when i reboot to bootloader in twrp it says "No OS installed!"
Any thoughts on that? Thanks :fingers-crossed:
I searched the forums before posting. 73 results came up and I read through and followed instructions of 7 different posts that seemed similar to mine (including the ones that appear when making a new thread), but nothing has worked or I haven't found a situation like mine.
Hi.
I have a HUGE problem and need help.
I was on Cyanogen OS 12.1 and decided to install the latest Cyanogen OS 13.1. I downloaded the flashable zip. Booted into TWRP recovery and installed the zip file. I had always allowed my phone to reinstall Super SU in the past with great succes, but it seems I shouldn't have done that according to someone in Oneplus forums. Now my phone is stuck on the bootup animation that says "Cyanogen MOD ready". I also cannot boot into the recovery or safe mode using hardware keys. Please help! I don't want to lose my phone or my data!
Thanks for any advice.
note: I used the signed flashable zip from here.
EDIT: I was able to boot into recovery using the command "fastboot boot recovery.img". I cleared dalvik cache and flashed COS 13.1 zip. Currently waiting for phone to boot. Hope it doesn't get stuck on the bootup screen again.
EDIT2: It looks like my phone has booted successfully and is now optimizing apps for COS update! If I don't follow up, it means everything worked out great again!
EDIT 3: My phone finished "optimizing" apps. I thought it would take me to my launcher as all other times I've updated. To my surprise, the phone seemed to reboot and was stuck on the "splash screen" (Cyanogen MOD ready). After that, I got the "Android is starting" "Optimizing app xx of xxx" message again, which is incredibly weird and I think my phone might be in a bootloop. PLEASE HELP!
EDIT 4: I remembered that I did a nandroid backup last February so I restored it with "restore" in TWRP. My phone has been stuck on the "Cyanogen" boot screen for about 40 minutes. I'm lost.
To recap everything:
1. I was trying to manually upgrade from COS 12.1 to COS 13.1
2. My phone was rooted, had TWRP recovery and ADB debugging was enabled in dev options. I can enter fastboot mode using hardware keys. I cannot enter recovery using hardware keys (shows a blank screen), but I can enter recovery using "fastboot boot recovery.img.
3. After I flashed COS 13.1, I was asked (in TWRP) if I wanted to install SU and I said yes and flashed it. This is when I was in a loop of being stuck on COS 13.1 splash screen for about 5-10 minutes and then my phone was "optimizing app xx of xxx" for 15 minutes and then rebooted and did everything all over again.
4. I tried to restored a nandroid backup using "restore" in TWRP, but phone is stuck in "cyanogen" splash screen for more than 40 minutes.
No replies...
Not sure what to do at this point.
I ended up wiping data and performing a factory reset through TWRP. Might try to upgrade again in the future.
Hi,I have a XT1033 indian dual sim model(for specifics),It was running cm13 nightly latest,twrp 3.0.0-2 and bootloader 4.18
So I was watching youtube when suddenly the cyanogenmod booting symbol came,At first I thought I may have been holding the power buttton but after muh time i force shutdown it and restarted but it has been in bootloop since then, so I thought maybe it was problem with cyanogenmod and I thought of reinstalling cm13 fresh,so I booted into TWRP and chose wipe, advance wipe and selected to erase all partitions, it says erasing was succesfull but nothing has been erased,So i thought of flashing stock firmware using fastboot and I did everything was successful so I reboot the system but it still showed cyanogen mod bootlogo and it was still in bootloop.I thought it was a hardbrick and tried to use the bootloader bricker and use flash-blank.bat but bootloader bricker too does not work. Please help me,I have a busy week and my phone is very important to me.
Okay, so I have a Boost Mobile Moto G (Falcon) and I unlocked it, flashed TWRP, and installed SlimROM. I forgot to activate the phone before flashing it with Slim, so I tried flashing the stock 4.4.4 ROM. When I did, it had an error 70 I believe. I then flashed the ROM manually using CMD, and when I rebooted it, it only flashed the Android with the text "No Command" under it. It's just flashing it over and over till I power the phone off. I've installed another recovery (CWM), but when I try to boot into it, it says "Boot up failed".
Is there any possible way to fix this? I made a backup using TWRP, but I accidentally erased it. Right now I'm stuck in the bootloader.
Internal storage also doesn't show up.