HI everyone I flashed this rom http://forum.xda-developers.com/note-edge/development/req-sm-n915g-fw-2-11-15-n915gxxu1cojb-t3239089 using Odin but Odin flash failed giving error Volume size is too big or Invalid ext4 image..Please someone help me to get out of this..
My phone model is SM-N915G (Indian Version)..This is my only phone..Please help me ..I ll be very thankful..
So flash another, it means you need the pit file as the partition table is wrong for your Edge. Its easier toflash another rom thanto play around with the easily brickable pit file to find the right one...
ultramag69 said:
So flash another, it means you need the pit file as the partition table is wrong for your Edge. Its easier toflash another rom thanto play around with the easily brickable pit file to find the right one...
Click to expand...
Click to collapse
Thanks for prompt reply...Really appreciate your help..I am downloading stock rom 5.0.1 of Indian Region..Can i flash this through ODIN to normally boot my phone??
ultramag69 said:
So flash another, it means you need the pit file as the partition table is wrong for your Edge. Its easier toflash another rom thanto play around with the easily brickable pit file to find the right one...
Click to expand...
Click to collapse
Thanks my phone booted successfully after flashing Indian region stock rom 5.0.1..Thanks a lot...Can u please guide me which rom to flash for 5.1.1 ..Thnks..
kinng111 said:
Thanks my phone booted successfully after flashing Indian region stock rom 5.0.1..Thanks a lot...Can u please guide me which rom to flash for 5.1.1 ..Thnks..
Click to expand...
Click to collapse
For the love of all that's Holy ..... DON'T GO TO A STOCK 5.1.1 !
Sorry,that's how much I hate it.
The Radius Kid said:
For the love of all that's Holy ..... DON'T GO TO A STOCK 5.1.1 !
Sorry,that's how much I hate it.
Click to expand...
Click to collapse
Thanks for ur advice..Can u please help me to root my stock 5.0.1 rom (N915GXXU1BOL4_N915GODD1BOL3_INS) Indian phone so that i can restore all my data and apps through titanium back and remove some bloatware..:good:
Related
I flashed my tab P6200 to ICS P6200XXLQ1, after that i did a full wipe :crying: then my tab cant load into OS...
i still able to access into download mode, but every time when i tried to flash other rom with odin it kept stuck at factoryfs.img :crying:
anyway to recover this?
Please help~
really sorry mate - but i think you've hard bricked the thing..
http://forum.xda-developers.com/showthread.php?t=1807002
this could be your issue..
omg...i thought it is soft bricked as i still able to access into download mode ~>.<~
Verifies that the firmware package that you downloaded is not corrupt, then enters in download mode, flash with ODIN ,if it remains in bootloop enters into recovery and performs wipe date , factory reset, should start ....
dejima said:
I flashed my tab P6200 to ICS P6200XXLQ1, after that i did a full wipe :crying: then my tab cant load into OS...
i still able to access into download mode, but every time when i tried to flash other rom with odin it kept stuck at factoryfs.img :crying:
anyway to recover this?
Please help~
Click to expand...
Click to collapse
download stock rom,go to download mode,and flash with odin..after that,full wipe,factory reset.try flash it with new downloaded ics md5 file again.
May i know which firmware is consider a stock rom? i tried few of them from sammobile, but all stuck at factoryfs.img >.<
dejima said:
I flashed my tab P6200 to ICS P6200XXLQ1, after that i did a full wipe :crying: then my tab cant load into OS...
i still able to access into download mode, but every time when i tried to flash other rom with odin it kept stuck at factoryfs.img :crying:
anyway to recover this?
Please help~
Click to expand...
Click to collapse
The same to me, maybe superbrick.
Try to download pit file for P6200 and reflash firmware, pit file via Odin.
If not work, send it to SS service for warranty or repartition use pit file, look for at Gnotes, Tab 7.7 box.
Sent from my GT-P6200 using Tapatalk 2
dejima said:
May i know which firmware is consider a stock rom? i tried few of them from sammobile, but all stuck at factoryfs.img >.<
Click to expand...
Click to collapse
everything from sammobile is a stock ROM.
you tried a few?? what was your criteria for choosing them?
wingie6200 said:
everything from sammobile is a stock ROM.
you tried a few?? what was your criteria for choosing them?
Click to expand...
Click to collapse
Those from my region and some randomly picked. I also tried with pit and repartition...well~ no luck too
the worst case just send to service center
dejima said:
Those from my region and some randomly picked. I also tried with pit and repartition...well~ no luck too
the worst case just send to service center
Click to expand...
Click to collapse
I would check here first
http://forum.xda-developers.com/showthread.php?t=1681047
Sent from my myTouch 4g via Tapatalk
ringnutz said:
I would check here first
http://forum.xda-developers.com/showthread.php?t=1681047
Sent from my myTouch 4g via Tapatalk
Click to expand...
Click to collapse
Probably the files on : http://forum.xda-developers.com/showthread.php?t=1681047 are not ok for p6200....... the files in that guide are for p6210 wifi only ( without 3g module like p6200... ). Or not?!?!?!
tellone said:
Probably the files on : http://forum.xda-developers.com/showthread.php?t=1681047 are not ok for p6200....... the files in that guide are for p6210 wifi only ( without 3g module like p6200... ). Or not?!?!?!
Click to expand...
Click to collapse
I would expect that if you would find the files for the 6200 version that it would do the same thing. It's already borked. Is it under warranty
Sent from my myTouch 4g via Tapatalk
hi there,i´ve tried superman rom but i think i canget away with root and sound mode, altough i´m having a problem in revert to stock,after downloading the rom from sammobile and flasit with Odin it always fail in the system part of the process,any hints please?
pbls said:
hi there,i´ve tried superman rom but i think i canget away with root and sound mode, altough i´m having a problem in revert to stock,after downloading the rom from sammobile and flasit with Odin it always fail in the system part of the process,any hints please?
Click to expand...
Click to collapse
Hi mate
What error do you get ?
Try with this guide
http://forum.xda-developers.com/galaxy-s7/how-to/official-stock-firmware-update-odin-t3369431
When I'm trying to flash the original rom in the AP part it fails,says system read only,but I already manage to flash superman rom,although I would like to flash stock again
pbls said:
When I'm trying to flash the original rom in the AP part it fails,says system read only,but I already manage to flash superman rom,although I would like to flash stock again
Click to expand...
Click to collapse
Flashing with odin should not matter but your bootloader is unlock (developer options)
Try to flash it as described in the guide i posted before.
also her you have another way to go
http://forum.xda-developers.com/galaxy-s7/how-to/guide-revert-to-stock-anytime-kies-t3396314
Problem solved,flashed in another PC and solved it,probably it was a corrupt file downloaded,thanks
pbls said:
Problem solved,flashed in another PC and solved it,probably it was a corrupt file downloaded,thanks
Click to expand...
Click to collapse
Great news , thanks for letting us know
How to fix system rev. check fail device: 3 binary 2 error when flashing 5.1.1 ROM
nikkilku26 said:
How to fix system rev. check fail device: 3 binary 2 error when flashing 5.1.1 ROM
Click to expand...
Click to collapse
That is due to the firmware file bro!
Download latest lollipop and flash it it'll flash properly
I had the same problem too
Sent from my SM-G935F using Tapatalk
Yeah ive flashed lastest file only..bt still same promblem i think it is bzo of new bootloader in marshmallow..it doesn't allow old version
nikkilku26 said:
Yeah ive flashed lastest file only..bt still same promblem i think it is bzo of new bootloader in marshmallow..it doesn't allow old version
Click to expand...
Click to collapse
Delete the Cryptographic Manager bin file from the lollipop rom file and you are ready to flash :fingers-crossed:
mono21400 said:
Delete the Cryptographic Manager bin file from the lollipop rom file and you are ready to flash :fingers-crossed:
Click to expand...
Click to collapse
Okay ill try thank you☺
nikkilku26 said:
Okay ill try thank you
Click to expand...
Click to collapse
Not working?
Does anyone have lollipop bootloader file for j700f?
nikkilku26 said:
Does anyone have lollipop bootloader file for j700f?
Click to expand...
Click to collapse
You're not going to be able to downgrade to the lollipop bootloader. The MM firmware you are running is rev 3, the lollipop firmware is rev 2. You can't downgrade revisions.
If you want to go back to lollipop then you may be able to flash just boot and system images, but ymmv.
ashyx said:
You're not going to be able to downgrade to the lollipop bootloader. The MM firmware you are running is rev 3, the lollipop firmware is rev 2. You can't downgrade revisions.
If you want to go back to lollipop then you may be able to flash just boot and system images, but ymmv.
Click to expand...
Click to collapse
Thank you for your reply sir.. so how can i flash boot & system image?..will flashing only those files cause my warranty void?
nikkilku26 said:
Thank you for your reply sir.. so how can i flash boot & system image?..will flashing only those files cause my warranty void?
Click to expand...
Click to collapse
They are stock images so shouldn't trip knox.
Extract the required images from the firmware with 7zip then repack those images into a tar archive with 7zip.
ashyx said:
They are stock images so shouldn't trip knox.
Extract the required images from the firmware with 7zip then repack those images into a tar archive with 7zip.
Click to expand...
Click to collapse
Ok sir ill try and tell u.. tysm☺?
nikkilku26 said:
Ok sir ill try and tell u.. tysm?
Click to expand...
Click to collapse
ive lost my iemi ...downgraded ..how can i restore iemi?...ive tried every thing getting back to mm rom but my iemi is 000000000
nikkilku26 said:
ive lost my iemi ...downgraded ..how can i restore iemi?...ive tried every thing getting back to mm rom but my iemi is 000000000
Click to expand...
Click to collapse
How did you do that?
ashyx said:
How did you do that?
Click to expand...
Click to collapse
Means? ..i have deleted sbin and cm and flashed existing files... success.. successfully downgraded without any error but i lost signals.. after a while i found that my iemi code was missing... so i reflashed my official mm frimware(stock) bt still no change 0000000000 ..how do i restore it.? Or how could i change that? Plz help me ???
nikkilku26 said:
Means? ..i have deleted sbin and cm and flashed existing files... success.. successfully downgraded without any error but i lost signals.. after a while i found that my iemi code was missing... so i reflashed my official mm frimware(stock) bt still no change 0000000000 ..how do i restore it.? Or how could i change that? Plz help me ???
Click to expand...
Click to collapse
You've got me well confused now. Why on earth did you delete sbin? Also by CM do you mean you had CyanogenMod installed?
If that is the case then it may be that CM has corrupted your EFS partition.
This is not the first time that someones build of CM has done this.
Did you have custom recovery installed?
ashyx said:
You've got me well confused now. Why on earth did you delete sbin? Also by CM do you mean you had CyanogenMod installed?
If that is the case then it may be that CM has corrupted your EFS partition.
This is not the first time that someones build of CM has done this.
Did you have custom recovery installed?
Click to expand...
Click to collapse
Not cyanogenmode..cm.bin file.. ive not installed any custom recovery.. ive deleted cm.bin and sboot.bin files and flashed other files.. previously ive flashed with sboot.bin it throwed same error so i ve deleted it..
nikkilku26 said:
Not cyanogenmode..cm.bin file.. ive not installed any custom recovery.. ive deleted cm.bin and sboot.bin files and flashed other files.. previously ive flashed with sboot.bin it throwed same error so i ve deleted it..
Click to expand...
Click to collapse
Ah I see.
Try flashing the repair firmware:
http://firmware.gem-flash.com/index.php?a=browse&b=file-info&id=7838
Be aware this may wipe your internal storage.
ashyx said:
Ah I see.
Try flashing the repair firmware:
http://firmware.gem-flash.com/index.php?a=browse&b=file-info&id=7838
Be aware this may wipe your internal storage.
Click to expand...
Click to collapse
Ohkk ill try..bt incase if it fails tell me an app to restore iemi for exynos j7 ..everything is okay only iemi was missing..
nikkilku26 said:
Ohkk ill try..bt incase if it fails tell me an app to restore iemi for exynos j7 ..everything is okay only iemi was missing..
Click to expand...
Click to collapse
Marshmallow installed bt iemi not restored... still no signal
nikkilku26 said:
Marshmallow installed bt iemi not restored... still no signal
Click to expand...
Click to collapse
I think you should try factory resetting your device via recovery.
MY phone (Samsung galaxy grand prime SM-G631H/DD) got bricked after i tried to flash custom rom .. I forget to enable usb debugging mode and turn on OEM my pc was turned off during flashing process.. I am not able to flash anything from odin it gives error ..like... while flashing twrp fap lock prevents it from flashing it .. WHEN i turn on my phone "Firmware upgrade encountered an issue.Please select recovery mode in kies&try again . But the samsung kies software does noty support my device ..help me guys...
dhenewar said:
MY phone (Samsung galaxy grand prime SM-G631H/DD) got bricked after i tried to flash custom rom .. I forget to enable usb debugging mode and turn on OEM my pc was turned off during flashing process.. I am not able to flash anything from odin it gives error ..like... while flashing twrp fap lock prevents it from flashing it .. WHEN i turn on my phone "Firmware upgrade encountered an issue.Please select recovery mode in kies&try again . But the samsung kies software does noty support my device ..help me guys...
Click to expand...
Click to collapse
Odin is the only way.
Try these troubleshooting steps for a failed Odin flash.
https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Odin can still flash the device while in the "encountered an issue, connect to Kies" screen.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Odin is the only way.
Try these troubleshooting steps for a failed Odin flash.
https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Odin can still flash the device while in the "encountered an issue, connect to Kies" screen.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Thnks for reply bro but I have seen it already don't know what to do but
Hey bro n there was many list of firmware version to download does it matter ? In Samsung official site I don't know which version is my phone's default I have tried 3 of them one failed at system.img .another at boot.img .. another stucks at DO NOT TURN OFF THE TARGET! ..
$Ail.A$ce said:
Thnks for reply bro but I have seen it already don't know what to do but
Hey bro n there was many list of firmware version to download does it matter ? In Samsung official site I don't know which version is my phone's default
Click to expand...
Click to collapse
There should be a 3 letter code that represents the country/region/carrier for each firmware version.
Find the newest version for your model number that matches your country/region/mobile carrier.
Sent from my SM-S903VL using Tapatalk
Hello,
in addition to what Droidriven mentioned i would recommend also to use the latest stable odin
-Hope- said:
Hello,
in addition to what Droidriven mentioned i would recommend also to use the latest stable odin
Click to expand...
Click to collapse
I usually recommend a version of Odin that was released shortly after the device was released because those versions were updated to be compatible with the device, whereas newer versions of Odin are less compatible with devices that were released a year or more before it.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
I usually recommend a version of Odin that was released shortly after the device was released because those versions were updated to be compatible with the device, whereas newer versions of Odin are less compatible with devices that were released a year or more before it.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
sorry for late reply bro .. the firmwares I had got are the model version's of my country ..I got slow internet so takes time to download . the PDA version/code which has different number in last like (AOH .AOH2.AOI.AOQ ) so on ..do they need to match my device .. the below link is the source I downloaded
https://www.sammobile.com/firmwares/galaxy-grand-prime/SM-G531H/NPL/ .. n thanks bro I will try with Odin version suitable for device .
$Ail.A$ce said:
sorry for late reply bro .. the firmwares I had got are the model version's of my country ..I got slow internet so takes time to download ..Should the PDA version/code match my device ..from the below link
https://www.sammobile.com/firmwares/galaxy-grand-prime/SM-G531H/NPL/ .. n thanks bro I will try with Odin version suitable for device .
Click to expand...
Click to collapse
As long as what you flash is for your specific device model number and your region/carrier you should be fine.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
As long as what you flash is for your specific device model number and your region/carrier you should be fine.
Click to expand...
Click to collapse
Well bro I downloaded all the firmware of it's carrier available .. and also tried with different Odin .... Still it fails at system.img .. ?
dhenewar said:
Well bro I downloaded all the firmware of it's carrier available .. and also tried with different Odin .... Still it fails at system.img .. ?
Click to expand...
Click to collapse
The custom ROM that you tried to flash, was it for your model number? Or was it for a different device?
Try different USB ports, try a different PC, try a different cord.
If all else fails, try finding a copy of your device's PIT file and flash that in Odin along with the stock firmware. Place the firmware where it goes then place the PIT in the pit tab in odin, make sure the "re-partition" option is checked in Odin then start.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
The custom ROM that you tried to flash, was it for your model number? Or was it for a different device?
Try different USB ports, try a different PC, try a different cord.
If all else fails, try finding a copy of your device's PIT file and flash that in Odin along with the stock firmware. Place the firmware where it goes then place the PIT in the pit tab in odin, make sure the "re-partition" option is checked in Odin then start.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Tried everything bro .. I gave up on this phone ..However I appreciate your concern bro thanks
dhenewar said:
Tried everything bro .. I gave up on this phone ..However I appreciate your concern bro thanks
Click to expand...
Click to collapse
Win some, lose some.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Win some, lose some.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Haha there's no win bro .. gone is gone .. for new u should pay some or regret some for messing your lonely only phone ?
Hello, This could be kind of weird but
Download the Unified Android tool kit
Do a copy of the frimware you want to flash
remove the .md5 extension from the file name of the new file
the image file should now transfer into a zip file
extract it in the Unified Android tool kit INPUT folder
Run the ToolKit
it will do an update check
now type 99 and press enter
a list of choices will appear choose the " create tar files from image files" it's maybe number 8 as i remember
now choose to make a separate tar files of each image file
once done , the tar files will be placed in the OUTPUT folder
try to flash System tar file alone without the other partitions.
-Hope- said:
Hello, This could be kind of weird but
Download the Unified Android tool kit
Do a copy of the frimware you want to flash
remove the .md5 extension from the file name of the new file
the image file should now transfer into a zip file
extract it in the Unified Android tool kit INPUT folder
Run the ToolKit
it will do an update check
now type 99 and press enter
a list of choices will appear choose the " create tar files from image files" it's maybe number 8 as i remember
now choose to make a separate tar files of each image file
once done , the tar files will be placed in the OUTPUT folder
try to flash System tar file alone without the other partitions.
Click to expand...
Click to collapse
Sorry for v.late reply bro .. for this to work fo I need to be rooted?? And I have done exactly what you said but I got stuck in that system.tar file flashing
How much time it would take to flash system.tar file
dhenewar said:
Sorry for v.late reply bro .. for this to work fo I need to be rooted?? And I have done exactly what you said but I got stuck in that system.tar file flashing
How much time it would take to flash system.tar file
Click to expand...
Click to collapse
System.IMG is the largest file to flash so it would be the longest to flash
-Hope- said:
System.IMG is the largest file to flash so it would be the longest to flash
Click to expand...
Click to collapse
It got stuck at like 3 or 4 % .. for 20 minutes I waited it didn't progress any further
The imp. Thing is Fap lock n ?
And when I try flashing other .tar files it goes 100% n stuck at RQT_CLOSE!! FOR A WHILE and it fails
I try to root my s9+ but I forget the format factory before flash the twrp recovery and I cannot flash the file no-verity-opt-encrypt-6.0. zip and now the phone show me a error that only official binary can flash and is in loop due that the recovery is corrupted.
how I can fix this issues Please and thanks you...
diniersm said:
I try to root my s9+ but I forget the format factory before flash the twrp recovery and I cannot flash the file no-verity-opt-encrypt-6.0. zip and now the phone show me a error that only official binary can flash and is in loop due that the recovery is corrupted.
how I can fix this issues Please and thanks you...
Click to expand...
Click to collapse
hopefully u dont have a U or U1 because those cant be rooted lol.. if u got a unlockable variant then sounds like u just need to start over.. flash full stock firmware in odin to start over
elliwigy said:
hopefully u dont have a U or U1 because those cant be rooted lol.. if u got a unlockable variant then sounds like u just need to start over.. flash full stock firmware in odin to start over
Click to expand...
Click to collapse
U1 or U in model number or build number? I have G965F.
i wasnt even talking to u lol.. i was talking to the op
Sent from my SM-G965U using Tapatalk
elliwigy said:
hopefully u dont have a U or U1 because those cant be rooted lol.. if u got a unlockable variant then sounds like u just need to start over.. flash full stock firmware in odin to start over
Click to expand...
Click to collapse
My phone is a Samsung SM-G9650/DS Galaxy S9+ Duos TD-LTE CN (Samsung Star 2).
diniersm said:
I try to root my s9+ but I forget the format factory before flash the twrp recovery and I cannot flash the file no-verity-opt-encrypt-6.0. zip and now the phone show me a error that only official binary can flash and is in loop due that the recovery is corrupted.
how I can fix this issues Please and thanks you...
Click to expand...
Click to collapse
Sorry to report but you got hit my the rmm lock again. You will have to wait 7 more days for it to reset again. Sucks I know I've done it myself before. Basically you can't ever even start to boot full stock with oem unlock on and TWRP flashed and without the bypass patch in place or rmm resets and you wind up in 7d flash jail.
A strategy that has been successful so far is to flash twrp leaving auto reboot off and then booting to twrp immediately without even ever loading stock, then first thing before anything else flash the rmm zip. Then you will be safe even if you forget other stuff. Also if you ever flash stock vendor.img again you have to reflash the zip as it changes stuff in there.
Solved
Thanks for your answer.... I Used the Last version of odin modded and flash the last firmware with odin and the phone now is as new jejeje....
Solved
elliwigy said:
hopefully u dont have a U or U1 because those cant be rooted lol.. if u got a unlockable variant then sounds like u just need to start over.. flash full stock firmware in odin to start over
Click to expand...
Click to collapse
Yes, I flash the stock firmware with odin modded and now the phone is OK, Thanks.
diniersm said:
Yes, I flash the stock firmware with odin modded and now the phone is OK, Thanks.
Click to expand...
Click to collapse
What is this Odin modded version? What's the problem with regular Odin?
dboechat said:
What is this Odin modded version? What's the problem with regular Odin?
Click to expand...
Click to collapse
regular odin can only flash stock firmware for ur model.. modded odin can flash combos or switch between U and U1 firmwares..
modded basically disables hash checks i believe.. u cant flash anything but allows for a bit of flexibility with stock signed firmwares