Database Info

menagers please close this one: found my answer

Hi,
as written, i have motorola atrix (MB860).
I whould like to know if any of you guys operating systems recognizing your 2 cores? is it identifies Cortex A-9 chipset?
all of my operating systems (...includding ics alpha and beta ) so far always showed : arm v7 instead of arm v9.
now, i have two questions:
1: Do you ran into a version which idetifies the correct (arm A-9) chipset?
2: This one is ONLY for who knows for sure - is "arm v7" just wrong tagging name and the system is working and using the changes made from arm v7 to arm v9? (ofcourse in that case i won't mind what's written as long as the device working as it should).
thanks guys,
tomer

[Q] Unlock bootloader of samsung tv

I to all i want to unlock the bootloader or get the access of is menu but i can't find info on how to do it.
The tv set as an arm cpu and these are the specific info
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 798.72
Features : swp half thumb fastmult vfp edsp
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc08
CPU revision : 2
Hardware : Samsung SDP92 Evaluation board
Revision : 0000
Serial : 0000000000000000
I think that maybe i can try guide to unlock a bootloader of mobile phone but before to try this i'm searching one device with the same processor...
I have telnet ssh serial uart access of this device and i have access to top debug menu too
I think that the device use uboot but i'am no sure
I try to run fw_printenv to get more info but the fw-printenv is missing
the fw of tv is an embedded version called linux selp 2.6
how i can collect more info about bootloader through shell???
are there other tool like fw_printenv that can do that?
Any suggest is accepted.
thanks

Mk- said:
I to all i want to unlock the bootloader or get the access of is menu but i can't find info on how to do it.
The tv set as an arm cpu and these are the specific info
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 798.72
Features : swp half thumb fastmult vfp edsp
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc08
CPU revision : 2
Hardware : Samsung SDP92 Evaluation board
Revision : 0000
Serial : 0000000000000000
I think that maybe i can try guide to unlock a bootloader of mobile phone but before to try this i'm searching one device with the same processor...
I have telnet ssh serial uart access of this device and i have access to top debug menu too
I think that the device use uboot but i'am no sure
I try to run fw_printenv to get more info but the fw-printenv is missing
the fw of tv is an embedded version called linux selp 2.6
how i can collect more info about bootloader through shell???
are there other tool like fw_printenv that can do that?
Any suggest is accepted.
thanks
Click to expand...
Click to collapse
Dude ! ... Just Listen !! ... This is the WRONG FORUM ... Please .... Just Read the forum's title and Rules before Creating a new thread (That too for a stupid question) or making a post ... Please ... Let's keep XDA Clean ...

[Completed] Dissecting Jlinksz K107 Android Tablet

Hi out there!
Now I've a cheap Chinese tablet, and started to dig down into the rabbit hole.
Model number: K107 -- maybe Jlinksz
CPU information: 8 cores MT8752
Android version: 5.1 -- Means Lollipop
Baseband version: MOLY.WR8.W1449.MD.WG.V6.P13,2016/01/27 09:53
Kernel version: 3.10.72+, [email protected] #1, Sat May 7 12:31:42 CST 2016
Build number: K107_vKB003I_20160507
Custom build version: vKB003I
Unfortunately there is no kitchen ready solution for this model,
so I'm on my own...
I've managed to dig out the "ROM"'-s from it - seems OK, but I'm not sure.
I've mtk-tools from:
[SCRIPTS] Unpack / repack MT65xx/MT83xx boot.img, recovery.img or logo.bin by bgcngm
It can successfully unpack the logo BTW, but did not created png-s.
I've done the conversion, mod the pictures, repack them, flash them with fastboot
and it worked! ! !
Also, the system image seems ext4, and can be loop-mounted...
My goal is to put a set of linux tools into the tablet (mc, dropbear, and others)
I did not tried to alter and flash it...
Where can I upload the images for the community for further study?
Someone might validate if they are OK or not, before I go further...
There might br traps out there...
Maybe someone can do the right stuff on it - I am not too experienced doing these things.
Regards
meres5

meres5 said:
Hi out there!
Now I've a cheap Chinese tablet, and started to dig down into the rabbit hole.
Model number: K107 -- maybe Jlinksz
CPU information: 8 cores MT8752
Android version: 5.1 -- Means Lollipop
Baseband version: MOLY.WR8.W1449.MD.WG.V6.P13,2016/01/27 09:53
Kernel version: 3.10.72+, [email protected] #1, Sat May 7 12:31:42 CST 2016
Build number: K107_vKB003I_20160507
Custom build version: vKB003I
Unfortunately there is no kitchen ready solution for this model,
so I'm on my own...
I've managed to dig out the "ROM"'-s from it - seems OK, but I'm not sure.
I've mtk-tools from:
[SCRIPTS] Unpack / repack MT65xx/MT83xx boot.img, recovery.img or logo.bin by bgcngm
It can successfully unpack the logo BTW, but did not created png-s.
I've done the conversion, mod the pictures, repack them, flash them with fastboot
and it worked! ! !
Also, the system image seems ext4, and can be loop-mounted...
My goal is to put a set of linux tools into the tablet (mc, dropbear, and others)
I did not tried to alter and flash it...
Where can I upload the images for the community for further study?
Someone might validate if they are OK or not, before I go further...
There might br traps out there...
Maybe someone can do the right stuff on it - I am not too experienced doing these things.
Regards
meres5
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Obviously, there are no specific forums for your device on XDA. However, you may ask your questions here:
http://forum.xda-developers.com/android/help
That is our Android development and hacking section and you'll receive expert advice there.
Good luck!

TY
Zero replies mostly
TY

Well..
AKA > /dev/null

[Completed] [Searching ROM] iPhone Clone Model ML6H2CHA/A [MTK MT6582] all details inside

Hello guys im new here and i hope u can help me. I need a new valid ROM to replace the actual Rom of my Clone because it doesent works properly.
ill let u below all the description of my phone.
Mediatek MT6582
Architecture : 4x ARM Cortex-a7
Model: ML6H2CH/A
Manufacturer :ALPS
Android version: 4.4.4
API Level : 17
Bootloader: unknown
Build ID: ALPS.JB7.MP.V1.14
JAVA VM Dalvik 1.6.0
Kernel architecture: armv7l
Kernel Version: 3.4.39
I rly hope u can help me.
THX!

frik0o said:
Hello guys im new here and i hope u can help me. I need a new valid ROM to replace the actual Rom of my Clone because it doesent works properly.
ill let u below all the description of my phone.
Mediatek MT6582
Architecture : 4x ARM Cortex-a7
Model: ML6H2CH/A
Manufacturer :ALPS
Android version: 4.4.4
API Level : 17
Bootloader: unknown
Build ID: ALPS.JB7.MP.V1.14
JAVA VM Dalvik 1.6.0
Kernel architecture: armv7l
Kernel Version: 3.4.39
I rly hope u can help me.
THX!
Click to expand...
Click to collapse
up

up

frik0o said:
up
Click to expand...
Click to collapse
Hi,
I couldn't find much information about your device here, as you can see from this search result.
Try posting your query in:
Android Q&A,Help and Troubleshooting.
Hopefully you'll find someone who knows more about it.
Good luck

Art Vanderlay said:
Hi,
I couldn't find much information about your device here, as you can see from this search result.
Try posting your query in:
Android Q&A,Help and Troubleshooting.
Hopefully you'll find someone who knows more about it.
Good luck
Click to expand...
Click to collapse
thx for the help ill check it tomorrow!!

Art Vanderlay said:
Hi,
I couldn't find much information about your device here, as you can see from this search result.
Try posting your query in:
Android Q&A,Help and Troubleshooting.
Hopefully you'll find someone who knows more about it.
Good luck
Click to expand...
Click to collapse
i think that is imposible to find the phone i tryed many times, maybe theres an option to find some comtabible

[CLOSED] Android 4.2.2 kernel 3.0.36+ linux Install

Hey im looking for help here i have a project and need help because im stuck. And this community is the best. So here goes.....
The project is this:
I want to install kali linux (preferably net hunter) on this tablet that i got from a friend who just got out of prison and had zero use for it i know this tablet sucks more than a hoover but i cannot bring myself to toss out good working devices so i want to put this to use for penetration testing and improving my android to android otg/adb/flashing/rooting skill set. It's not often you get a burner to play with lol....and who can beat free?
Now i've used linux deploy but no matter what version of linux i deploy/install (debian fedora kali ubuntu) I seem to always get the same results........ FATAL kernel to old.......so ive turned to the experts for help because i'm not familiar with installing linux ( windows user) so i wanted to take this opportunity to get into the linux world.......so some info about the system i'm currently running.....
First this tablet is fully rooted with the exception of the bootloader i have not been able to get the bootloader unlocked so i still have a stock recovery....and it blows id much rather have twrp..
Second here is the systems info and I hope someone can guide me to a rootFS that i can install using linux deploy or any other way i can run linux ontop of android that will actually start I have both vnc viewer and No Machine installed but because i cannot get linux to fully install I cannot use them lol......
So anyways any help would be greatly appriciated and THANKS A MILLION IN ADVANCE EVERYONE!!!!
********************************System ********************************
Android 4.2.2 / Jelly Bean MR1 / API 17
Baseband Version:
Build Number: JP5JDQ48.worker.20171109.075727
Build Fingerprint: JPay/jp5s/jp5s:4.2.2/JP5JDQ48/worker.20171109.075727:user/release-keys
Linux Kernel Version: 3.0.36+
Http User Agent: Dalvik/1.6.0 (Linux; U; Android 4.2.2; JP5s Inmate Media Device Build/JP5JDQ48)
********************************HARDWARE ********************************
Model: JP5s Inmate Media Device
Manufacturer: JPay Inc.
Board: jp5s
Device: jp5s
Product: jp5s
CPU Cores: 4
CPU Bit: 32-Bit
CPU Model: RK30board
Memory: Total 1.0 GB, Avail 457.62 MB
Storage: Total 27.34 GB, Avail 8.53 GB
Resolution: 1024 * 600 px / 160 dp
Screen Size: 5.8" * 3.6" / 6.8 Inches
******************************** SCREEN ********************************
Density: 160 dp / mdpi / 1.0x
Exact Density: 177.2093 * 168.89351 dp
Resolution: 1024 * 600 px
Available Resolution: 1024 * 552 px
Screen Size: 5.8" * 3.6" / 6.8 Inches
******************************** VIRTUAL MACHINE ********************************
Dalvik
VM Version: 1.6.0
Java Home: /system
Class Path: .
Boot Class Path: /system/framework/core.jar:/system/framework/core-junit.jar:/system/framework/bouncycastle.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/telephony-common.jar:/system/framework/mms-common.jar:/system/framework/android.policy.jar:/system/framework/services.jar:/system/framework/apache-xml.jar:/system/framework/tigerclient.jar
******************************** CPU ********************************
ABIs: armeabi-v7a, armeabi
CPU Cores: 4
CPU Bit: 32-Bit
CPU Model: RK30board

I'm sorry but I had to close this thread and to remove related posts. With reference to rule no. 9 of the XDA Forum Rules we do not allow discussions about jailbreaking or unlocking of Jpay tablets.
9. Don't get us into trouble.
Don't post copyrighted materials or do other things which will obviously lead to legal trouble. If you wouldn't do it on your own homepage, you probably shouldn't do it here either. This does not mean that we agree with everything that the software piracy lobby try to impose on us. It simply means that you cannot break any laws here, since we'll end up dealing with the legal hassle caused by you. Please use common sense: respect the forum, its users and those that write great code.
Click to expand...
Click to collapse
Regards
Oswald Boelcke
Senior Moderator