I have an Sony xperia e3 d2212 running stock recovery n ROM 4.4.2 also stock
I rooted my phone using kingoroot.apk n switched to SuperSU using supersume pro.apk
I have no PC access so I still have a locked boot loader
Today I found a link to an app named EZ unlock.apk which said it could unlock my boot loader I installed hit unlocks asked me if I wanted to unlock my boot loader I hit yes n a msg saying boot loader unlocked piped up in seconds
Den I took cwm for my phone from XDA n tried updating my recovery using mobile unclemtk tools n wen I selected the recovery.IMG it got switched off n hasn't turned on yet led notification is also not working
I tried connecting to a PC it don't recognize my device
My mistake was the cwm was for Sony xperi e3 d2212 running stock 4.4.4
I flashd it on my 4.4.2 that must have caused the bricking plZz help me it isn't even booting in fastboot
Since my phone got bricks I'm pretty sure that app must have unlocks my boot loader other wise it would have booted normally as I tried flashing the same cwm b4 using the same tool
PlZz help me
Thanks in advance
Hope ugot a clear picture of my problem
First, everyone who wants to help you would appreciate some appropriate use of the English language. You don't have to be fluent or anything, at least just write properly.
Secondly, I would recommend trying first the Sony PC Companion to restore everything, if it doesn't work, try using the flashtool with XperiFirm to download the appropriate software and flash it. Here is guide on using XperiFirm
pc isnt recognising
silv3rfox said:
First, everyone who wants to help you would appreciate some appropriate use of the English language. You don't have to be fluent or anything, at least just write properly.
Secondly, I would recommend trying first the Sony PC Companion to restore everything, if it doesn't work, try using the flashtool with XperiFirm to download the appropriate software and flash it. Here is guide on using XperiFirm
Click to expand...
Click to collapse
firstly sory for my bad english
n secondly the pc isnt recognising tht phone it gets disconnected evry few secs although im saying that the phone stays connected for a few secs its purely based on the sound derzz actually no new software found or something like that popping on my screen
i appreciate ur interset in helping me out bruh!!!:good:
ty....
Related
Guys , I was on Jelly Sandwich with sirikay's kernel. I had some speed problems with wifi. So I thought of flashing stock ICS Rom ST18i_4.1.B.0.587_Kernel.ftf using uniflash.exe and did it. After flashing it didnt restart. So I clicked the power button to restart manually but just got a vibration sound and nothing else .. just the blank screen. So I searched for stuff about unbricking my device since I thought it's bricked. I downloaded this package "FlashTool_0.2.9.1_FOTAUnbrick.exe" and started flashing the firmwares. So I held down my volumedown button and connected it to the usb port. It says error and that I have to select usb debugging mode and connect again but I can't even start my mobile.
Plz help .. Thanks in Advance
Try using flash tool!
and flash stock ftf through that.....
Sent from my Xperia Neo V using xda premium
Hi
I confirm, just had the same problem while updating a custom ROM.
Get the Stock ftf file for your phone/model then use Flashtool to flash it.
Search the forum for the proper links there are likely to be all there somewhere
Hopefully, your phone will be back to life on a stock version.
And yes, if you want to re-install a custom ROM you need to re-do all the process: root, (optional) unlock Bootloader etc.
Good luck.
PS: I saw a thread saying to use the SEUS to restore the phone to stock. Worth a try but for me it didn't work since SEUS was telling my phone already had the latest version. Fix hard bricked ray
Hi,
I have Sony Ericsson Xperia X10i phone which was rooted already, recently I came to know about rom updation for android devices and I tried to update a new custom rom by entering to recovery mode through flash tool. Unfortunately something went wrong and now when I am trying power on the mobile it is freezes at Sony Ericsson Logo.
Please help me to enter in to recovery mode again (I hope all the data has wiped out due to miss handling, Even the flash tool is no able to detect phone model)
Holding the back button while power on is also not effecting.
I am not able to boot the phone so I am not in a position to check root access and super user status now.
Please help me....
Have you tried to go to cwm recovery by pressing volume down button
Sent from my Xperia Neo V using xda app-developers app
Thank you for the reply fenix,
I tried all key combinations.Nothing is going on my way.Is there any solution to get in to the recovery mode on this condition?I made a backup of my phone before the failure.
tyzanu Elijah
i think this is what we call as 'brick'
there are numerous videos showing how to unbrick the device
first u must know whether it is hard or soft brick
and then try to solve ur problem
shibin_delhi said:
Thank you for the reply fenix,
I tried all key combinations.Nothing is going on my way.Is there any solution to get in to the recovery mode on this condition?I made a backup of my phone before the failure.
Click to expand...
Click to collapse
Use "adb reboot recovery" and continually send it the command until the phone gets it.
or if your phone bootloader is unlocked then flashed a custom kernel with flash tool
if possible please provide a download link of unbrick software for sony ericsson xperia x10i. please discuss about the possibility of flashing a boot loader unblocked kernal and ROM.
Software for unbricking is available in this link
http://forum.xda-developers.com/showthread.php?t=1568792
Sent from my WT19i using xda premium
Sony Ericsson not booting after a wrong Custom ROM updation
Thank you for your valuable supports and patients towards me..Still my Xperia X10i is in brick condition.When i am trying to flash the flash tool is showing some error and it abort flashing.I checked with S1 tool it still identify the hardware as xperia x10i .There is no root access and the boot loader is not in unlocked condition.
Kindly provide the links for all file that i need to download.
Thank you.
Hi! My name is Petar and i new here at xda-developers. First of all I am not a developer and I do not have knowledge as much as you guys. I am here to ask for help. I have very very very BIG problem with my phone. It is Sony Xperia Miro. The phone is not expensive, but it is very very important to me. The phone was working perfectly untill i flashed cyanogen mod 10 JB mesina (i found mesina is the name for xperia miro). I know that Miro doesnt support JB officialy, but i found a video on You-Tube about un-official JB on Xperia Miro. Here is what i did:
-Rooted and unlocked bootloader using UnLock Root program (I verified the root with RootChecker app).
-Installed Clockwork mode.
-made a backup (nandroid).
-delete and wipe all data with clockwork.
-flash new rom ( Cyanogen mod 10 JB Mesina).
-after flashing completed 100%, the phone turned off ( the phone was fully 100% charged before doing all this).
-I tried to turn on the phone but i only get a single vibration (No led, No screen working, No sound).
-I tried to connect the phone to PC and restore original ICS using Sony PC Companion, but my PC doesnt detect my phone because unlocked bootloader.
-So i put the phone on charge for 6 days.
-Yesterday i took the phone off the charge and pushed it on. The phone didnt turn on, but i didnt even get a vibration only now i get is blinking RED LIGHT at top of the phone.
-I contacted you !
I read thousands of posts here on xda and everywhere on Google about fixing this. But I only found tutorials and fixes for other Xperias ( Z, S, J etc.), but not for my cheap miro ... Please guys i need to fix my phone really soon, please in name of the LORD , help me.. Thank you ):
you downloaded mesona cm10 zip file right? there is one boot.img file inside it, try to flash it first(using flashtool..search how to)
put cm10 for mesona on your sd card and after flashing boot.img go to recovery and flash the rom.
in case your pc does not detect your phone you should try on some other pc.
red led means your phone is not dead yet.
please step by step
c4cyro said:
you downloaded mesona cm10 zip file right? there is one boot.img file inside it, try to flash it first(using flashtool..search how to)
put cm10 for mesona on your sd card and after flashing boot.img go to recovery and flash the rom.
in case your pc does not detect your phone you should try on some other pc.
red led means your phone is not dead yet.
Click to expand...
Click to collapse
Thanks for the reply man..but please explain to me step by step how to do all that...
The Simplest way is to download Flashtool and Flash the stock firmware you can find in the General Section here on the Threads, after that see the magic,
If it works hit thanks bro !
So im preety much a noobie about all this. Anyways,my friend told me that i can install cwm and make my phone better. And i downloaded it,turned bat file and restarted my phone. After that it wouldnt turn on,it would just blind red LED and stay that way,then i put it on charger for whole day and then it was green,and i turned my phone on and it showed sony logo,then charging battery and it turned off again.. I tried with flashtool (at least i think i did) but it didnt work. It flashed it for like 5 sec and nothing,same thing. Also sus didnt work as well. So please if anyone can help me,just speak english not xda language coz i really dont understand the things u say.
Download stock ftf and flash it with Flashtool. Search for tut on how to.
Sent from my D2303
you should download stock kernel, maybe the one from matej. and flash back to stock kernel after using the cwm as xperia j JB has no permanent cwm yet
rajcuca said:
So im preety much a noobie about all this. Anyways,my friend told me that i can install cwm and make my phone better. And i downloaded it,turned bat file and restarted my phone. After that it wouldnt turn on,it would just blind red LED and stay that way,then i put it on charger for whole day and then it was green,and i turned my phone on and it showed sony logo,then charging battery and it turned off again.. I tried with flashtool (at least i think i did) but it didnt work. It flashed it for like 5 sec and nothing,same thing. Also sus didnt work as well. So please if anyone can help me,just speak english not xda language coz i really dont understand the things u say.
Click to expand...
Click to collapse
first I want you to go through this guide :Using Flashtool,
then 2. install the drivers for your xperia j as mentioned in the above guide.
3. if your bootloader is unlocked then try to flash this stock kernel if you were running jelly bean 11.2.A.0.31 : stock kernel by connecting your device in fastboot mode.
if your bootloader is locked then download this stock firmware : 11.2.A.0.31 by connecting your device in flashmode
then Flash this downloaded firmware as mentioned in the above guide.
4.Wait untill flashing completes. start your device when you are told to do so.
Good luck
I had TWRP and Existenz Rom with root but then i restarted my phone and somehow it got into a bootloop it never did this before, so i tried resetting and wiping all but system but it didn't work so i wiped the system ( I didn't remember that there was a bootloop fix for existenz ) and now i need help please tell me how to fix this and if you can tell me where to get an FTF for my phone
please help
you should try to repair your phone using xperia companion...
ajaychaudhary07 said:
you should try to repair your phone using xperia companion...
Click to expand...
Click to collapse
i tried that but it doesn't work it gives me an error when i connect the phone
and my bootloader is still locked
Can u still access the recovery?
I'm assuming yes then why don't you try a custom ROM.
Just search the XDA Forum. Your ll get official ROM as well.
perss volume up and power for a while
It will shut down your phone
Then, dont connect your phone to pc
use xperia companion and choose repair
Finally press volume down and connect to pc
I tried that and it didn't work but i fixed it
i can't access recovery or use xperia companion because it gives an error but i fixed it by downloading an ftf and flashing it with flashtool i then updated my phone to marshmallow with xperia companion, but thank you for replying