Related
Today I will tell you how to root one of the quite hard to root phones Qmobile Noir A2 Classic
WARNING:
- I am not responsible for bricked phones
- This tutorial will remove all data from your phone! Be sure to backup your phone book,messages,etc
- This Tutorial is for Qmobile Noir A2 Classic ONLY
Things To Download :-
Adb Drivers http://ge.tt/2yL21VT
Mtk Root and Tools http://dfiles.ru/files/fmnok7ke7
Vcom Drivers
Windows 8 http://www.mediafire.com/?7yee2of64nhl947
WIndows 7/xp/vista http://www.mediafire.com/?cypm22rgs2k83ji
SP Flash Tool http://www.mediafire.com/?agsj3n4neniq054
Scatter File https://www.dropbox.com/s/je0alc5db8t66ld/MT6575_Android_scatter.txt
Super Su ttp://db.tt/owvX0f7t
ROM http://db.tt/n7RhDp0l
Preloader and dsp_bl https://www.dropbox.com/s/prdtpd8px8649yx/preloader and dsp.zip
NOTE:
Write down you imei somewhere (press *#06# on dialer)
You will be needing it
Method:
-Install all Drivers
-Put scatter file ,extract rom and preloader,dsp_bl in one folder (makes things quite easy) replace if asked
-Turn off phone
-Open Sp Flash tool open scatter file and select the scatter file u downloaded
-put tick on all files on sp flash tool and select its corresponding file (for eg "ANDROID" is system.img)
-Click Firmware Upgrade on sp flash tool and connect phone (turned off)
-It Will show error! Disconnect Phone
-Remove tick from all files
-Now put tick on "BOOTIMG" "UBOOT" "RECOVERY" "LOGO"
-Press Download button and connect phone again (remove battery this time)
-It Will show green circle showing success!
-Disconnect Phone and Turn on phone in recovery mode (Press Vol+ with power button)
-(to navigate in recovery mode press vol + to go up press vol - to go down and press power to enter selection)
TO MAKE BACKUP: in recovery mode enter backup and restore, and backup it will take few mins
TO COPY BACKUP: in recovery mode find mounts and storage and turn on usb mount and connect your phone to computer while being at that mode a removeable drive will show up copy the clockworkmod folder
Okay now listen carefully go to the folder where you downloaded the rom (the one you downloaded from me) find the file system.img
rename it to system.yaffs2.img
then go to the folder where you copied the backup to you will find also system.yaffs2.img there replace that file with the file from the rom (the one you renamed earlier) next open the file "nandroid.md5" with notepad delete all the text it has and save it
now copy this folder back to your phone (replacing the old folder) and the Super su zip u downloaded earlier reboot your recovery (after copying back the backup it is important) NOW:
- factory reset
- go to backup and restore -> advance restore ->restore system
- go to update from sd card and select the super su zip
- reboot your phone normally
After the reboot your phone will be rooted But your imei will be lost
Here what you will do restore your imei:
1. remove all sim cards from phone ,turn on the phone in normal mode and connect it
2. open mtk tools press root button it will ask you for some thing just click ok
3. Click replace imei and enter the imei numbers (can be found on phone box or back of phone)
4. Click ok reboot your phone check for updated imei numbers
And Congratulation Your Phone is Rooted
Credits
@najamahmedisb (testing)
@trm33 (testing)
@threatalive (created the thread resulting in this tutorial)
@rua1 (MTK Droid and Tools)
I can confirm that this method does not only root A2 Classic but it can also repair bricked A2 Classic :victory:
@bilalz400 you may update the title, so the thread is easily accessible to people in need.
Awesome guide! :good:
I'll tell someone with this mobile if I come across one. People are using these alot since they're quality phones with reasonable prices.
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
RaoTayyab said:
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
Click to expand...
Click to collapse
Is you phone rooted do you have su in you app drawer? check again
najamahmedisb said:
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
Click to expand...
Click to collapse
Wow bro you mess you phone fast
Hows the quest for modding going on?
Contact @qmobilea2
He might help you in modding your phone
and for your file open mtk droid root and tools go to the root,backup and recovery section click unpack yaffs2 for the section and select system.img from the backup you used earlier this will extract the whole system.img and you will have all the system files you want to replace!
Sry for the late reply's i didnt checked the thread
bilalz400 said:
Is you phone rooted do you have su in you app drawer? check again
Click to expand...
Click to collapse
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
RaoTayyab said:
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
Click to expand...
Click to collapse
Very Happy to see your imei restored
can't copy backup
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
simply root it with Vroot
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Easy Rooting Method.
- I am not responsible for bricked phones
-and i am also not responsible if someone hit a bricked phone in your head
-don't worry your data remain safe :laugh::laugh:
Method:
first and first download the software from attached files below the post :good::good::good:
1) Install all the drivers (as the original post suggested ADB and VCOM )
2) turn USB debugging on.
3) Install the software , its in chinese but not very difficult to understand Just press the middle button once installed it should be looked like this (check the attachment )
4) press the button , let the software do its things, once your cell phone restart check the SU app in the drawer.
Caution: Do not Factory restore your phone after freezing apps or modification you will end up in a boot loop.
So what you do with this little Rooted device ?? duh off course make ext 4 partition on your SD Card and link your newly download aps using link2SD . no worrying of low space
AhsanKhaan said:
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Click to expand...
Click to collapse
Well if it works that will be a huge bonus!
Sent from my A2_Classic using xda app-developers app
Adnan Farooq Chatha said:
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
Click to expand...
Click to collapse
Use a memory card reader if removable disk does not appear
Sent from my A2_Classic using xda app-developers app
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
New framework etc.....
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
najamahmedisb said:
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
Click to expand...
Click to collapse
Bro i already looked into it and trying to fix it
don't post into this thread its a guide not a discussion one
root problem
hey can you help me how can I root my a2 classic?
it doesn't do anything in sp flash tool when I click frimware upgrade? or I click download?
bilalz400 said:
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
Click to expand...
Click to collapse
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
atir usman butt said:
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
Click to expand...
Click to collapse
Where did you got that file ?
PERMANENT IMEI SOLUTION
HELLO GUYS,I COME UP WITH THE WORKING SOLUTION OF IMEI FOR THOSE PEOPLE WHO LOST THEIR IMEI DURING SYSTEM PARTITION INCREASE OR DUE TO ANY SUCH CAUSE.TRY THIS ONLY WHEN YOU ARE IN LOST IMEI STATE.
TIPS-
AS IT CAN ONLY USED WHEN YOU ARE IN LOST IMEI STATE,BUT IF YOU RESTORED YOUR IMEI BY NON-PERMANET METHOD ROOT EXPLORER COPY PASTE AND WANTS DO DO THIS THEN TAKE CWM BACKUP AND FLASH A NEW ROM AND THEN FOLLOW THESE STEPS THEN AFTER SUCESSFUL IMEI RESTORED,RESTORE YOUR CWM BACKUP BUT I AM NOT SURE ABOUT THIS SO DO IT ON YOUR RISK OR TRY AFTER ANY NEW ROM INSTALL.
-------DOWNLOAD-LINKS--------
[CDC_DRIVERS_BY_DIGYVIJAY(see below attachment)
USB_Drivers_MMX_A110Q(see below attachment)
IMEI FILES
IMEI TOOL
NOTE-INSTALL BOTH DRIVERS
STEPS OF INSTALLNG DRIVERS:-
DRIVER1(CDC_DRIVERS_BY_DIGYVIJAY)-
EXTRACT CDC_DRIVERS_BY_DIGYVIJAY INTO A FOLDER
SWITCH OFF PHONE AND REMOVE BATTERY AND INSERT BATTERY AND DO NOT POWER ON.
NOW OPEN DEVICE MANAGER IN PC,THEN CONNECT YOUR PHONE,IT WILL SHOW A "CDS" AS UNKNOWN DEVICE.
BE QUICK HERE AND RIGHT CLICK AND CHOOSE UPDATE DRIVER.
CHOOSE BROWSE MANUALLLY OPTION IN THE WINDOW OPENED.
BROWSE MY DRIVER 1 EXTRACTED FOLDER AND SELECT IT AND CHOOSE INSTALL IT.
WAIT FOR SOME MINUTES,AFTER THAT IT WILL SHOW DRIVER INSTALLED SUCESSFULLY
IF ANYBODY CANNOT FIND NEW "CDS" AS UNKNOWN DEVICE IN DEVICE MANAGER THEN BEFORE DOING
THESE ALL STEPS,START IMEI TOOL AND PUT IMEI & BROWSE IMEI FILES(SEE STEPS BELOW) THEN CHOOSE START AND PLUG IN YOUR DEVICE IN OFF STATE(BATTERY REMOVED AND INSERTED).BUT IT WILL NOT START.NOW OPEN DEVICE MANAGER.YOU WILL FIND WHAT ARE YOU LOOKING FOR.
DRIVER 2(USB_Drivers_MMX_A110Q)
(IT IS MMX USB PRELOADER DRIVER,WHICH MAY YOU INSTALLED EARLIER,IF NOT THEN FOLLOW PROCESS-
EXTRACT USB_Drivers_MMX_A110Q IN A FOLDER
TURNOFF YOUR PHONE,OPEN DEVICE MANAGER
PLUG DEVICE THEN A NEW DEVICE WILL APPEAR IN DEVICE MANAGER LIKE-MT65XX PRELOADER
BE QUICK HERE AND RIGHT CLICK ON IT AND CHOOSE UPDATE DRIVE.
CHOOSE BROWSE MANUALLY IN NEW WINDOW OPENED
BROWSE TO THE EXTRACTED FOLDER AND INSTALL IT.
NOW AFTER BOTH DRIVERS INSTALLED,LETS GO TO MAIN THING-
STEPS:-
EXTRACT IMEI_FILES AND IMEI TOOLS.
NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe) WITH RUN AS ADMINISTRATOR.
NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB
IN IMEI TOOL TICK IMEI 1 AND IMEI 2 AND WRITE YOUR BOTH UR IMEI(FIND IMEI ON BILL,BOX,OR UNDER BATTERY)
NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER(IMEI FILE EXTRACTED)---DATABASE.
SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START .
NOW SWITCH OFF UR CELL AND REMOVE BATTERY AND INSERT IT AGAIN THEN CONNECT.
AFTER PROCESS FINISH REMOVE DEVICE AND REBOOT.
SOME NOTES:-
1)THIS WILL WORK ON ALL MEDIATEK DEVICES,BUT FOR OTHER DEVICE PLEASE CHANGE THEIR DATABASE FILES,THEY CAN FIND THEIR DATABASE FILES UNDER THEIR STOCK ROM FLASHABLE VIA SP FLASH TOOL.
2)AFTER THIS PROCESS YOU WILL NEVER LOOSE YOUR IMEI AFTER ANY CUSTOM ROM INSTALLATION VIA CWM.
3)YOU WILL ONLY LOOSE YOUR IMEI WHEN YOU USE SP FLASH TOOL METHOD TO FLASH ROM OR INCRESE PARTITION METHOD AGAIN.
100% WORKING & TESTED.
PRESS THANKS
CREDITS-
IMEI TOOL CREATOR
DIGYVIJAY KUMAR
Helper & Supportive Dev @tech mashido[
DO AT YOUR OWN RISK,I WILL NOT BE RESPONSIBLE FOR ANYTHING HAPPENS TO YOU DEVICE.
error
error enter meta mode fail
bhartendra said:
error enter meta mode fail
Click to expand...
Click to collapse
check CDC drivers installed or not.....or reinstall CDC drivers
Meta Mode Fail
digyvijaykumar123 said:
check CDC drivers installed or not.....or reinstall CDC drivers
Click to expand...
Click to collapse
all drivers are installed successfully but still MetaMode fail error..
it work on canvas2 yes or no plz reply
---------- Post added at 05:00 AM ---------- Previous post was at 04:55 AM ----------
srs1434 said:
all drivers are installed successfully but still MetaMode fail error..
Click to expand...
Click to collapse
i m agree with u
Is it worked for any one...If yes I would like to try it once coz every time I install new ROM my imei will be lost, since I have backup of IMEI every time I need to restore this backup file from Mobile uncle tool. Which is annoying process after every new ROM installation.
same error here and the driver are installed!
digyvijaykumar123 said:
PERMANENT IMEI SOLUTION
HELLO GUYS,I COME UP WITH THE WORKING SOLUTION OF IMEI FOR THOSE PEOPLE WHO LOST THEIR IMEI DURING SYSTEM PARTITION INCREASE OR DUE TO ANY SUCH CAUSE.TRY THIS ONLY WHEN YOU ARE IN LOST IMEI STATE.
TIPS-
AS IT CAN ONLY USED WHEN YOU ARE IN LOST IMEI STATE,BUT IF YOU RESTORED YOUR IMEI BY NON-PERMANET METHOD ROOT EXPLORER COPY PASTE AND WANTS DO DO THIS THEN TAKE CWM BACKUP AND FLASH A NEW ROM AND THEN FOLLOW THESE STEPS THEN AFTER SUCESSFUL IMEI RESTORED,RESTORE YOUR CWM BACKUP BUT I AM NOT SURE ABOUT THIS SO DO IT ON YOUR RISK OR TRY AFTER ANY NEW ROM INSTALL.
-------DOWNLOAD-LINKS--------
[CDC_DRIVERS_BY_DIGYVIJAY(see below attachment)
USB_Drivers_MMX_A110Q(see below attachment)
IMEI FILES
IMEI TOOL
NOTE-INSTALL BOTH DRIVERS
STEPS OF INSTALLNG DRIVERS:-
DRIVER1(CDC_DRIVERS_BY_DIGYVIJAY)-
EXTRACT CDC_DRIVERS_BY_DIGYVIJAY INTO A FOLDER
SWITCH OFF PHONE AND REMOVE BATTERY AND INSERT BATTERY AND DO NOT POWER ON.
NOW OPEN DEVICE MANAGER IN PC,THEN CONNECT YOUR PHONE,IT WILL SHOW A "CDS" AS UNKNOWN DEVICE.
BE QUICK HERE AND RIGHT CLICK AND CHOOSE UPDATE DRIVER.
CHOOSE BROWSE MANUALLLY OPTION IN THE WINDOW OPENED.
BROWSE MY DRIVER 1 EXTRACTED FOLDER AND SELECT IT AND CHOOSE INSTALL IT.
WAIT FOR SOME MINUTES,AFTER THAT IT WILL SHOW DRIVER INSTALLED SUCESSFULLY
IF ANYBODY CANNOT FIND NEW "CDS" AS UNKNOWN DEVICE IN DEVICE MANAGER THEN BEFORE DOING
THESE ALL STEPS,START IMEI TOOL AND PUT IMEI & BROWSE IMEI FILES(SEE STEPS BELOW) THEN CHOOSE START AND PLUG IN YOUR DEVICE IN OFF STATE(BATTERY REMOVED AND INSERTED).BUT IT WILL NOT START.NOW OPEN DEVICE MANAGER.YOU WILL FIND WHAT ARE YOU LOOKING FOR.
DRIVER 2(USB_Drivers_MMX_A110Q)
(IT IS MMX USB PRELOADER DRIVER,WHICH MAY YOU INSTALLED EARLIER,IF NOT THEN FOLLOW PROCESS-
EXTRACT USB_Drivers_MMX_A110Q IN A FOLDER
TURNOFF YOUR PHONE,OPEN DEVICE MANAGER
PLUG DEVICE THEN A NEW DEVICE WILL APPEAR IN DEVICE MANAGER LIKE-MT65XX PRELOADER
BE QUICK HERE AND RIGHT CLICK ON IT AND CHOOSE UPDATE DRIVE.
CHOOSE BROWSE MANUALLY IN NEW WINDOW OPENED
BROWSE TO THE EXTRACTED FOLDER AND INSTALL IT.
NOW AFTER BOTH DRIVERS INSTALLED,LETS GO TO MAIN THING-
STEPS:-
EXTRACT IMEI_FILES AND IMEI TOOLS.
NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe) WITH RUN AS ADMINISTRATOR.
NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB
IN IMEI TOOL TICK IMEI 1 AND IMEI 2 AND WRITE YOUR BOTH UR IMEI(FIND IMEI ON BILL,BOX,OR UNDER BATTERY)
NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER(IMEI FILE EXTRACTED)---DATABASE.
SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START .
NOW SWITCH OFF UR CELL AND REMOVE BATTERY AND INSERT IT AGAIN THEN CONNECT.
AFTER PROCESS FINISH REMOVE DEVICE AND REBOOT.
SOME NOTES:-
1)THIS WILL WORK ON ALL MEDIATEK DEVICES,BUT FOR OTHER DEVICE PLEASE CHANGE THEIR DATABASE FILES,THEY CAN FIND THEIR DATABASE FILES UNDER THEIR STOCK ROM FLASHABLE VIA SP FLASH TOOL.
2)AFTER THIS PROCESS YOU WILL NEVER LOOSE YOUR IMEI AFTER ANY CUSTOM ROM INSTALLATION VIA CWM.
3)YOU WILL ONLY LOOSE YOUR IMEI WHEN YOU USE SP FLASH TOOL METHOD TO FLASH ROM OR INCRESE PARTITION METHOD AGAIN.
100% WORKING & TESTED.
PRESS THANKS
CREDITS-
IMEI TOOL CREATOR
DIGYVIJAY KUMAR
Helper & Supportive Dev @tech mashido[
DO AT YOUR OWN RISK,I WILL NOT BE RESPONSIBLE FOR ANYTHING HAPPENS TO YOU DEVICE.
Click to expand...
Click to collapse
It's full of BULL**** ADS & POP-UPS the download links.......... Don't post if you want to waste users time instead of helping them.... Utter nonsense
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
If I helped you all just say thanks by hit the :good:Thanks Button...
Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
To download Root Explorer app go here:↓
Copy and paste to your browser
www29.zippyshare.com/v/95430308/file.html
If I helped you all just say thanks by hit the Thanks Button...
Click to expand...
Click to collapse
Thanks sir I was faced that problem from many long time...
Thanks 4 such a help...
Now My NVRAM WARNING ERR 0X10 PROBLEM HAS SOLVED...
---------- Post added at 03:13 AM ---------- Previous post was at 03:08 AM ----------
Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
To download Root Explorer app go here:↓
Copy and paste to your browser
www29.zippyshare.com/v/95430308/file.html
If I helped you all just say thanks by hit the Thanks Button...
Click to expand...
Click to collapse
Thanks sir I was faced that problem from many long time...
Thanks 4 such a help...
Now My NVRAM WARNING ERR 0X10 PROBLEM HAS SOLVED...
thank you, thank you, thank you!!!
works ok!!
Thanks
Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
To download Root Explorer app go here:↓
Copy and paste to your browser
www29.zippyshare.com/v/95430308/file.html
If I helped you all just say thanks by hit the Thanks Button...
Click to expand...
Click to collapse
WORKED FOR ME ON MY CANVAS 2.2. A114 THANKS FOR THE HELP....
:good::good::good::good::good:
Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
To download Root Explorer app go here:↓
Copy and paste to your browser
www29.zippyshare.com/v/95430308/file.html
If I helped you all just say thanks by hit the Thanks Button...
Click to expand...
Click to collapse
Can i use this file with other MTK phones?
imranz said:
Can i use this file with other MTK phones?
Click to expand...
Click to collapse
Yes obviously You can do it with all mtk phones... Good Luck..
If you satisfied with my answer, all U have to do - Press the :good:THANKS Button..
:good: -----<< THANK YOU >>----- :good:
It's working on HTM / LANDVO L900
Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
If I helped you all just say thanks by hit the :good:Thanks Button...
Click to expand...
Click to collapse
Thanks, but this only fixed the issue temporarily. Each time I restart my phone the error comes back and I have to do these steps all over again. Sigh.
mast idea hay bhai worked
Does not work for me, MT 6589 chip.
Lenovo P780ROW S221 rom
Worked on Doogee DG800 Valencia.
Worked for A116
Thanks a ton. i have been googling and scratching my head all around but you are the saviour. My WIFI is also working perfect now.
topatil said:
Thanks a ton. i have been googling and scratching my head all around but you are the saviour. My WIFI is also working perfect now.
Click to expand...
Click to collapse
Your Welcome topatil...
Asus memo pad hd 7
Worked a treat on my Asus memo pad after being returned by Asus with the error present. Thank you. Much appreciated mate
Not working on my canvas 2 plus A110q
Not working on my canvas 2 plus A110q.Still showing NVRAM error
Džůny said:
Worked on Doogee DG800 Valencia.
Click to expand...
Click to collapse
Unfortunately, only temporarily.
First, I have to admit that I did not have any luck with Total Commander (as described elsewhere in the net).
The Root Explorer from the first posting of this thread sometimes simply does not show the contents of the SD card. It then has to be restarted. Although I made sure that everything was mounted r/w, copying the fixed files to /data/nvram/APCFG/APRDEB failed at most attempts, I got the message that moving the files failed.
However, I managed it once to replace the WIFI file by a fixed one. But the NVRAM error then only changed from 0x10 to 0x01 - seems like bad luck here.
Kind regards,
DAC324
Worked on lenovo a369i. Tq
Sent from my Lenovo A369i using XDA Free mobile app
Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
Click to expand...
Click to collapse
Here is some amending information for phones like the Doogee Valencia DG800 which are a bit peculiar when rooted.
On these phones, the root user does not see the SD card because it is not mounted for root.
Thus, you cannot copy the repaired files back to the /data/nvram/APCFG/APRDEB as easily as described in this guide.
So please find below a modified guide for fixing the Doogee Valencia DG800 and similar phones:
Before doing anything else, check your phone's MAC address (settings, about phone, near the bottom). If it starts with zeroes (00:xx:xx...) just proceed with the steps below. If not, you can enter your own MAC address into the fixed WIFI file.
To accomplish this, you will need a hex editor. Unpack the fixed files from the attachment and open WIFI in the hex editor. The bytes to be changed are in the first row, starting from column 04. Here, you can enter your MAC address, overwriting the one included in the file.
Note (again): This only works if your MAC address does not start with 00:xx:...
Now let's proceed with the fix. To be sure, switch off WLAN on the phone, then do the following:
1. Unpack and transfer the fixed/edited WIFI files to your phone's SD card (preferably, into the root dir of the card)
2. Get ADB files from the attachment and unzip them into an empty folder on your PC.
3. Install (if not done already for rooting) the Doogee USB drivers (attached here because sometimes hard to find)
4. Connect the phone to the PC using USB.
5. Check if ADB can find your phone, type
Code:
adb devices
6. If no, check if the correct drivers are installed and on the phone, USB debug mode is switched on.
7. Now, enter the ADB shell (we can do everything from there, no additional apps needed) by typing
Code:
adb shell
8. In the shell, issue the following commands:
Code:
su
mount -t vfat /dev/block/vold/179:97 /mnt/media_rw/sdcard0
cd /data/nvram/APCFG/APRDEB
cp /mnt/media_rw/sdcard0/WIFI .
cp /mnt/media_rw/sdcard0/WIFI_CUSTOM .
exit
exit
UPDATE: If you installed the latest official Doogee firmware which is based on Android 5.0 (file name: 15-05-14 z869h-oq-k44-dg800-qhd-wg850p2100-emmc-64g8g-Android-5.0 外文归档（道格）.rar) the SD card is already mounted properly so you will have to issue the following commands:
Code:
su
cd /data/nvram/APCFG/APRDEB
cp /mnt/sdcard/WIFI .
cp /mnt/sdcard/WIFI_CUSTOM .
exit
exit
8. Disconnect and reboot the phone and switch WLAN back on. The error now should have been gone. If not (and you edited WIFI), you made an error or your MAC address is invalid (like the ones starting with 00:xx:...). Use the fixed WIFI file without editing then.
Good luck!
DAC324
Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
Click to expand...
Click to collapse
Just wanted to say thank you, your fix worked perfectly on my mtk6592 Chinese Clone S5
Nilendu said:
Many MTK device's users are facing the WiFi NVRAM WARNING err 0x10 Problem by formatting the whole flash by SP Flash Tool.
After a long time I Found a Solution for mtk Users to solve the problem.
This method is easy as any other methods..
What you need to perform the methods..??
1. A Rooted MTK device
2. Root Explorer.apk
3. Wifi Error Fix.rar
How to do this?
On Your Rooted device go to root Explorer
And navigate to File system root/
data/nvram/APCFG/APRDEB
There you will found to files named 1) WIFI , 2) WIFI_CUSTOM just simply delete these files
Now extract the files from the WiFi fix.rar
and move the extracted files to the previous (root/
data/nvram/APCFG/APRDEB) folder.
After this process complete You need to just reboot your device. Now go to the wifi adapter setting and you will find the message of NVRAM Error Warning is gone...
I tested this on my Micromax A89 Ninja(Mt6577).
If I helped you all just say thanks by hit the :good:Thanks Button...
Click to expand...
Click to collapse
I have tried this method on my lenovo S939 and its work thanks fellas :good::good:
i'm trying to install this rom thath find here: http://forum.xda-developers.com/lg-g-pro-2/development/rom-digital-minds-v1-t2838877
when was trying to install it , the device reboot happen that u can see in the video...
if some one know what happened pls help me....
https://www.youtube.com/watch?v=09i_LMlue80
do this
do this Backup your data, in external sdcard.
Require root ( I do it with towelroot
Download rar file(Digital Minds V2 - Live) and extract
Copy the system folder to internal SD card root ( copy including the system folder , dont just copy the img file )
Make sure you have adb(find in gp2.rar) and the USB drivers(LG United Mobile) and debugging enabled(tap (7) times to About phone/Software information/Build number, go back to Settings/ Developrment options/ check Usb debugging) ,and
Run the script (Install ROM .bat),grant ADB root permission on the phone and sit back and relax for about 3-4 mins , once done,
Reboot
Hi Guys,
I am Going To Guide You How To Restore IMEI Of Your Samsung GALAXY J2 All Variants.
I AM NOT RESPONSIBLE FOR ANY DAMAGE OR BRICKING OCCURRED WITH YOUR DEVICE DURING THE PROCESS!!
FOLLOW MY GUIDE STEP BY STEP FOR PERFECT SOLUTION.
REQUIREMENTS :-
● Samsung GALAXY J2 Smartphone With Unknown/Blank/Null IMEI.
● Z3X Box With PRO Activated License.
● ES File Explorer App. (Available In Play Store)
● "serial_no" File. (Which Contains Your SN Number.)
STEP 1: ROOTING YOUR SAMSUNG GALAXY J2 :-
Follow My Previous Post Step By Step To Root Your Samsung Galaxy J2 Smartphone.
STEP 2: TAKING A COMPLETE BACKUP OF YOUR EFS :-
You Must Take A Complete Backup Of Your EFS Folder Via TWRP Recovery.
Click On "BACKUP" and Check The "EFS" And Uncheck Remaining Options And Swipe To Take The Backup.
If You Want To Restore, Just Click On "RESTORE" And Select "EFS" And Swipe To Restore.
STEP 3: COPY THE "serial_no" FILE :-
Goto Play Store And Download The Latest Version Of ES File Explorer.
Open It And Enable "ROOT EXPLORER" And GRANT SuperSU Permissions.
Mount System To READ/WRITE.
Goto Directory "DEVICE/EFS/FACTORY APP" And Copy The "serial_no" File To Your Internal/External Storage.
STEP 4: ENABLE USB DEBUGGING :-
Goto >>SETTINGS >>ABOUT DEVICE>> TAP BUILD NUMBER 3 TO 5 TIMES.
Get Back To SETTINGS And Goto >>DEVELOPER OPTIONS >>ENABLE USB DEBUGGING.
STEP 5: RESTORING IMEI :-
Connect The Z3X Box And Open "SamsungToolPRO.exe."
Select "SMJ200G/H/BT" And Goto "Repair" Section.
Connect Your Device To The PC While It Is Switched On Via USB Cable.
Click On "PORT" And Select It (It Can Be Shown Either "SMJ200G/H/BT" Or "Unknown Offline" But Dont Worry, Just Select Whatever Shown On PORT Section.)
Now, Click On "RESET EFS" To Begin The Process.
Don't Forget To "GRANT" SuperSU Permissions.And "ALLOW" The Debugging Permission Prompt.
The Phone Will Reboots Itself And Shows Your Original IMEI.
To Check, Just Dial *#06# In The Dialer.
ADDITIONAL/STEP 6: REPAIRING THE SN NUMBER :-
If You Lost SN Number (Known As Device Serial Number) During The Process, Just Paste The "serial_no" File From Your Internal /External Storage To The Directory "DEVICE/EFS/FACTORY APP/" Via ES File Explorer App And Reboot Your Device.
The SN Number Will Be Updated To It's Original State After Reboot.
Now Your IMEI And SN Number Are Back And Safe.
KEEP SMILING!!!
Hi Is There A Way To Restore The IMEI Without Any Box Coz I Don't Have One
Thanks alot, But after repairing my IMEI can i unroot my phone?
I am usin Z3X Samsung Tool Pro v32.6. How will I go about restoring IMEI?