Hi guys i need help, i wanted flash a ROM but i make format system, wipe data and i forgot transfer the ROM, now i don't know how transfer the Zip of the ROM, because i only. can enter into bootloader and recovery because the phone ovbiously don't start, help me.
PD: i can't use adb in recovery :c
If you wiped the data, there's nothing to recover.
Having the same issue now :crying:
Flashed my ROM and boot screen is stucked now, wiped all my data...
Have tried using TWRP and CWM old 4.3x but no luck, as when I try to boot recovery it just go straight pass it to boot the ROM. (Bootloader -> Recovery -> Volume Up)
I have noticed that my computer (Windows 8.1) is missing out driver for XT1034, however it should be identified as XT1032 not XT1034?
If I could get a driver software for XT1034, I could possibly use either Recovery mod to mount the /SDcarrd/ and then transfer the ROM zip file.
What I've currently using:
Tesco Moto G (8GB)
CWM v6.0.4.6
Previous ROM is Stock KK
Motorola DeviceManager Software - contains the drivers for Moto G
What I know was that my phone was definilty recognised as XT1032 and not sure why it changed to XT1034...
Please someone shed some light
Got it sorted now, back on 4.3!
http://forum.xda-developers.com/showthread.php?t=2542219
Hey guys, i'm having some SERIOUS problems with my 1st generation moto g XT1033.
Some days ago, i flashed stock android 5.0. Alright... So, i discovered that that were cm12 nightlies on the official cyanogenmod site and i flashed it. So, just after that i discovered that dual sim wasn't ported yet so i tried to change to stock 5.0, but my phone entered in a boot loop so i flashed stock 4.4.4, with no luck... now i flashed 5.0 but it's still not booting, i am now thinking about going back to CM12, which already have dual sim... the problem is that i dont know why, TWRP MTP isn't working, so now i just cant pass the CM12 zip to the phone because of that. please i need help i dont know what to do, if there's some way to flashing it without using TWRP's MTP. Thanks a lot and sorry about the english
pedrocarboni said:
Hey guys, i'm having some SERIOUS problems with my 1st generation moto g XT1033.
Some days ago, i flashed stock android 5.0. Alright... So, i discovered that that were cm12 nightlies on the official cyanogenmod site and i flashed it. So, just after that i discovered that dual sim wasn't ported yet so i tried to change to stock 5.0, but my phone entered in a boot loop so i flashed stock 4.4.4, with no luck... now i flashed 5.0 but it's still not booting, i am now thinking about going back to CM12, which already have dual sim... the problem is that i dont know why, TWRP MTP isn't working, so now i just cant pass the CM12 zip to the phone because of that. please i need help i dont know what to do, if there's some way to flashing it without using TWRP's MTP. Thanks a lot and sorry about the english
Click to expand...
Click to collapse
Bad idea, never try to downgrade... If you can still access fastboot you are VERY luck that your phone did not end up in a hard brick. :fingers-crossed:
Try and flash stock 5.0 from fastboot mode. And wipe everything including userdata.
Goodluck!
skyguy126 said:
Bad idea, never try to downgrade... If you can still access fastboot you are VERY luck that your phone did not end up in a hard brick. :fingers-crossed:
Try and flash stock 5.0 from fastboot mode. And wipe everything including userdata.
Goodluck!
Click to expand...
Click to collapse
Thanks for Helping!!! Just one question: How can i pass the stock zip to the phone to flash it if mtp is not working?Any suggestions? Because i think its not possible to flash 5.0 using fastboot, just on the stock recovery
update: I have just figured out that adb is working with CWM, which i have installed right now Yay!now I can push files from my computer!!
https://androidxda.net/how-to-unbrick-moto-g-1st-gen-2013-after-lollipop-5-0-android-update/ :laugh::laugh:
pedrocarboni said:
Thanks for Helping!!! Just one question: How can i pass the stock zip to the phone to flash it using if mtp is not working?Any suggestions? Because i think its not possible to flash 5.0 using fastboot, just on the stock recovery
Click to expand...
Click to collapse
If you have unlocked boot loader then go into fastboot mode and run "fastboot boot customrecovery.img" where customrecovery.img is CWM or TWRP. I recomment TWRP. From there you can adb sideload the zip. Only flash it if you know exactly what you are doing or you may end up in a hard brick.
skyguy126 said:
If you have unlocked boot loader then go into fastboot mode and run "fastboot boot customrecovery.img" where customrecovery.img is CWM or TWRP. I recomment TWRP. From there you can adb sideload the zip. Only flash it if you know exactly what you are doing or you may end up in a hard brick.
Click to expand...
Click to collapse
i used sideload flashing CM12,but i have recieved the error message "could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/system, assuming ext4 mount:failed to mount /dev/block/platform/msm_sdcc.1/byname/system: Invalid Argument
unmount of /system failed; no such volume detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system" and when i try mounting /system, CWM says Error mounting /system!
pedrocarboni said:
i used sideload flashing CM12,but i have recieved the error message "could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/system, assuming ext4 mount:failed to mount /dev/block/platform/msm_sdcc.1/byname/system: Invalid Argument
unmount of /system failed; no such volume detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system" and when i try mounting /system, CWM says Error mounting /system!
Click to expand...
Click to collapse
Do this at your own risk:
Your system partition is corrupt, you need to enter adb shell and format /system into ext4s. Search on google for the command as I do not have it on the top of my head. I believe it has something to do with make_ext4s function.
pedrocarboni said:
Hey guys, i'm having some SERIOUS problems with my 1st generation moto g XT1033.
Some days ago, i flashed stock android 5.0. Alright... So, i discovered that that were cm12 nightlies on the official cyanogenmod site and i flashed it. So, just after that i discovered that dual sim wasn't ported yet so i tried to change to stock 5.0, but my phone entered in a boot loop so i flashed stock 4.4.4, with no luck... now i flashed 5.0 but it's still not booting, i am now thinking about going back to CM12, which already have dual sim... the problem is that i dont know why, TWRP MTP isn't working, so now i just cant pass the CM12 zip to the phone because of that. please i need help i dont know what to do, if there's some way to flashing it without using TWRP's MTP. Thanks a lot and sorry about the english
Click to expand...
Click to collapse
Pedro, I have the same problem.
I can only access bootloader and recovery, but using adb sideload I can't flash any image (and version) that works.
I just get boot looping as you, and gpt.bin and motoboot.img files can't be flashed.
I've found that with Lollipop bootloader we can't install an older Android version.
My Moto G is now a paperweight, until the final stock Lollipop comes.
pedrocarboni said:
i used sideload flashing CM12,but i have recieved the error message "could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/system, assuming ext4 mount:failed to mount /dev/block/platform/msm_sdcc.1/byname/system: Invalid Argument
unmount of /system failed; no such volume detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system" and when i try mounting /system, CWM says Error mounting /system!
Click to expand...
Click to collapse
Hi, I experienced the same problem. Have you fixed your phone? Please give me some suggestion. Thank you.
Same problem with my Moto G 2013.
I've tried to downgrade and got problem. Now I can't flash an older motoboot.img and gpt.bin.
I'm using CyanogenMod 12, but every time when I boot, there is a line going down over the screen.
This line only disappear when I turn off and on the screen. Then everything backs to normal.
Is there a way to solve this?
This happened to me yesterday, i wento from my US Retail 4.4.4 to BR Retail 4.4.4 then via stock recovery flashing the OTA of 5.0, installed Xposed but gave me slow boots, like 5 min per boot, so i decided to downgrade, flashed 4.4.4 BR but after boot a black screen comes and doesn't go, think of flashing 4.4.2 US but the same isue, then decided to update again to 5.0 BR but stock recovery don't let me flash because an error, i flashed philz touch and do a factory reset, wipe data, cache, and everything, then flashed flashing 4.4.4 BR and then 4.4.2 US, the line down problem is nothing, only appears when you boot and, if you lock your phone for about 2-3 seconds, it dissappear (until you boot again), hope it helps, sorry for bad english
For all with bootloops, there is a major issue caused with a boot animation memory leak. Search on the forum to find the fix. You may need to delete the bootanimation binary.
skyguy126 said:
For all with bootloops, there is a major issue caused with a boot animation memory leak. Search on the forum to find the fix. You may need to delete the bootanimation binary.
Click to expand...
Click to collapse
skyguy126, I've not found any solution for this on forum.
Could you please show me a way?
For those that have problems downgrading, download this and follow this steps.
Once finished flash TWRP recovery and restore your nandroid.
Moto G not Booting, HELP
Hi everyone, I really need help with my moto G, it´s not booting into android after pressing the power button the moto logo comes up and the phone goes directly into fastboot displaying a message in pink color: version downgrade for boot
Failed to validate boot image.
I have been hours checking around for a solution and working now for the third day trying to solve the problem with no luck.
I have downloaded the original firmware for the device, tried to flash it and it doesn´t work, tried other countries firmware and they doesn´t work either.
The process will be partially ok but as it goes to flash the boot.img, recovery and system files it will give an error.
I also tried bootloader refresh, bootloader bricker and blankflash to try fix any possible bootloader issues.
The device has a locked bootloader since it is a moto g from AIO.
Please Help, It´s my only device and I cannot afford another one at this time.
There´s a few images from the flash process and device info
:crying:
You need to unlock your bootloader in order to flash various ROMs.
but in this model the bootloader cannot be unlocked it is CID 0X0010
How did this happen to your phone? What model phone do you have?
It´s a Moto G 2013, xt1032
It all begin trying to install a signed stock firmware that was supposed to be for that specific model: AIO_XT1032_4.4.2-KXB20.9-1.10-1.9_CFC_1FF.xml
During the flash process it send some error messages but the process keep running until it finishes, once the device reboot it went straight to fastboot and since then I haven´t been able to get it back working.
Are you manually flashing each partition?
Maybe try a 4.4.4 ROM.
Yes, I have. I´ve also tried other signed firmware that have a .bat file that run all by itself but neither way it worked. It comes up with the error message: Invalid signed Image and below Preflash Validation Fail
Hi all. I own a Moto G xt1032 UK version. (GSM right?)
I was on 4.4.4 Epsilon ROM but I wanted to flash stock 4.4.4, so I used a tutorial I found on youtube that set me up to stock 4.4.2, then I upgraded to 4.4.4 and THEN there was another update to 5.0.1. So as you can guess, I upgraded to lollipop and that was it - bootloop. I have tried flashing other roms through fastboot and nothing worked, I get an error when I flash ''system'' that says ''image is too large'' once all is done, phone restarts and its stuck on bootloop once again. The bootlogo changes when I flash different rom etc. But I don't know what to do, any ideas? :/ I have also tried to flash a custom recovery and sideload the Epsilon ROM but I only get an error in my command line that says no device connected after I hit the command. Any suggestions guys? I appreciate any sort of help, thanks guys.
I'll also add that I think I have the 41.18 bootloader if it helps (it says so in the bootloader settings)
When flashing a ROM in fastboot, are you also flashing the gpt file?
Yeah. I flash everything there's to flash as all tutorials instruct.
To try and get your phone up and running, flash a custom recovery from fastboot. Once the recovery image has been flashed, use the phone's volume buttons to boot into recovery. If you can get into recovery, try and flash a custom ROM.
Ah, I forgot to add. When I attempt to flash anything from my storage it says some sort of error coun't mount /sdcard and others when the recovery opens up. I tried flashing other recoveries, TWRP, CWM both show the exact same errors..Can't mount SDcard etc. :/ That is why I tried the sideload method which didn't work for me either.
You're flashing recovery for the falcon?
Yes..for falcon. I've done it a bunch of times before, however I never had the unable to mount error in the recovery..
I don't have my moto g on me but I found Philz Touch (based on CWM) worked besr for me after i switched back from GPE to CM12. I was getting weird error messages in TWRP.
good night. my brother has a moto g on the 5.1 version i guess, never rooted or custom recovery. after a 0% battery and no charge, the device stucked in logo of motorola
the first option is save the device, but data is very important to rescue, so it's priority to me.
the BL was locked, to try flash something i unlock it without loose data, i guess...
i can access BL, 41,1A version. tried fastboot and mfastboot to flash 5.0.2 retail rom and 5.1 stock with no success, boot loop of warning!!
can acess recovery, but can wipe data/factory reset, give a error and boot loop.
adb it's only sideload, and give error of footer, no install any of any file.
on adb apply update from sdcard i can view all my folders that i want to bkp, but how i get them? push and pull doesn't work.
I'm doing something wrong, just do not know what it is...
can someone help me? i read a lot of threads!!
i got this error when try wipe factory reset on stock recovery
blkdiscard on partition /dev/block/platform/msm_sdcc failed
and that's it. just wait like another brick in another falcon device.
tks 4 those who read and do nothing!!!
Hi, I've got a XT1032, with the Lollipop bootloader and TWRP 3.0.0 installed, and I have a custom rom I want to flash (https://forum.xda-developers.com/moto-g/development/rom-aosp-4-4-4-gpe-screen-flickering-t3499889)
When I go to flash the ROM, TWRP says that the zip install went perfectly, but when I boot, it just loads into the stock Lollipop.
Even when I go to my computer and find fastboot devices, fastboot comes up with nothing, even though the Moto is in fastboot, and plugged into my computer.
It's awfully late, I have school tomorrow, and I kinda need my phone with the ROM I want. Please help!
...you have to change data to ext4, wipe everything, then install that rom.
ALSO UPGRADE TO 3.2.3
AaronVey22 said:
...you have to change data to ext4, wipe everything, then install that rom.
ALSO UPGRADE TO 3.2.3
Click to expand...
Click to collapse
I have exactly the same issue with my Moto G falcon.
As per your suggestion I have tried to format/change the data partition from f2fs to ext4 via TWRP, but everytime the format process completes successfully but does not change /data to ext4, it still stays stuck at f2fs
- I have tried multiple official twrps for falcon - 3.2.3, 3.2.1, 3.0.2.2 and son on ... nothing works
- I have also tried to format/wipe data with all TWRP version, nothing works
PS: My device was lying dead since a couple of years or so, but it was working fine back in 2017. Could this be a firmware issue?