Database Info

[Q] Unbricking Samsung ACE SPH-i325 from bad flash`

Does anyone know how to recover and unbrick a Samsung Ace from a bad flash. My friend tried to upgrade to WM 6.1 using the official upgrade available from samsungusa.com.
All went well, so he says, and the device reset. Instead of loading up it became stuck on a bootloader screen which dispays the samsung logo and www.samsungusa.com.
All attempts to hard reset:
1. hold soft keys
2. press power button
3. press left soft key for clean boot.
have proved futile.
when it is connected to the USB cable it does not recognize the device.
Any help would be greatly appreciated.
P.S. I do not think that a call to Sprint Help center will help so I will have to find a community assisted solution.

first advice: after a flash, the initial boot takes very long compared to the normal boot - so let the device sit for 5-10 minutes after switch on, leave the room, have a coffee and wait.
Not sure about the upgrade process for Samsung, but the normal sequence is anyway that the device enters the bootloader when loading the new software.
So as long as you have the bootloader (are you sure it is the bootoloader and not some splashscreen?) nothing is really "bricked".
First make sure you put the device in bootloader mode, then you can just retry the flash with the device connected via USB sitting in boot loader. AS will not find it in this mode, but the flash program should after a while and then continue with the flashing.

tobbbie said:
first advice: after a flash, the initial boot takes very long compared to the normal boot - so let the device sit for 5-10 minutes after switch on, leave the room, have a coffee and wait.
Not sure about the upgrade process for Samsung, but the normal sequence is anyway that the device enters the bootloader when loading the new software.
So as long as you have the bootloader (are you sure it is the bootoloader and not some splashscreen?) nothing is really "bricked".
First make sure you put the device in bootloader mode, then you can just retry the flash with the device connected via USB sitting in boot loader. AS will not find it in this mode, but the flash program should after a while and then continue with the flashing.
Click to expand...
Click to collapse
Thanks Tobbbie, with the above I should be able to clarify:
But first my apologies for my newbie-ness. I did leave the room, went to be, got up and still no change. I am attaching a pic of what I see on the phone. It seems to be the splashscreen.
I am still able to access the hard reset screen using the procedure as shown in the original post, but this takes me nowhere either. Doing a hard reset takes me back to the logo screen with text : "Clean boot mode" included. this also sits for hours.
I was hoping someone would be able to post a solution of the form seen here: http://forum.xda-developers.com/showthread.php?t=689423

Sorry, cannot help any further here as I do not have this device. If the flash process from the PC does not recognize the connected device in this mode, try to disable USB connections in AS and retry flashing. Normally the flash-SW on the PC will terminate AS so this is not required - but just in case...

http://www.samsungmobileusa.com/i325/upgrade/
try to reinstall the usb drivers or try another pc! Do you use vista? try XP! Remove SIM and SD-Card

Did all the above recommended but came up blank. Still hoping for a solution from the community.

same problem,i tried to upgrade to wm6.1,on the middle,my pc restarted and iam struck.pls some body help me.

I have also same problem. if any one have tested solution plzzzzz share
I will b very greatful

Pantech Burst Bricked HELP!!!

I recently picked up a Pantech Burst phone from At&t, and upgraded to ICS. I then proceeded to root the phone using the prestoroot.img method and it worked. Everything was running dandy until I got the VM Heap tool app and(stupidly) set the vm heap to 52m and attempted to reboot... It failed and all I got was a loop of boot up animations. I tried several times to reboot, and then tried to boot to recovery mode and factory reset. That worked, but it STILL didnt reboot..! I dont have a backup, and whenever i try to " Install update from external storage", it just fails over and over again. I found thestock firmware and downloaded it to my external sd card and install(still to no success). Im only 13 and cant afford a new phone! PLEASE SOMEONE HEEEELLLLPPPPPP!!!!!!!!!!!!!

Use P9070_Download_Tool_v3.3.zip and flash PRESTO_BIN_JUUS09032012_TP20_user using this method http://forum.xda-developers.com/showthread.php?p=28602800#post28602800. You might find other answers in that same thread Pantech Burst Essentials.

I love you!!!!!!!
dvinelord said:
use p9070_download_tool_v3.3.zip and flash presto_bin_juus09032012_tp20_user using this method http://forum.xda-developers.com/showthread.php?p=28602800#post28602800. You might find other answers in that same thread pantech burst essentials.
Click to expand...
Click to collapse
it workkeed!!!!!:d

DvineLord said:
Use P9070_Download_Tool_v3.3.zip and flash PRESTO_BIN_JUUS09032012_TP20_user using this method http://forum.xda-developers.com/showthread.php?p=28602800#post28602800. You might find other answers in that same thread Pantech Burst Essentials.
Click to expand...
Click to collapse
I bricked my phone few days back doing restore from CWM 6 downloeded online from ROM manager,
I wiped cache dalvik etc & rebooted, I could see the Tap the android screen then suddenly blank now it wont start
I get QHSUSB_dload in PC device manager any way out
I tried this method but I dont get the download button to click it remains greyed out.
Is there any driver for QHSUSB_dload?
Or do I have no hope at the moment or in near future?

just don`t use ROM manager for installing recovery . usually the result is bricked phone

Yah, i remember a fastboot brick i got from rom manager (LG Optimud ME)
Sent from a 2.8 inch screen

I also just bricked my Pantech Burst the same way...using ROM Manager. Is there a way to fix this or am I out of luck? I did try the method posted at the top of this thread. It just gets locked in the S/W Upgrading screen. Any help will be greatly appreciated.

I'm too in same situation.....i tried it updating via Pantech OS Upgrade tool......it updates successfully but doesnot bootup....
and now it shows some S/W Upgrading with red colour background
plz help me out:crying::crying::crying::crying::crying:

coolamjadkhan said:
I'm too in same situation.....i tried it updating via Pantech OS Upgrade tool......it updates successfully but doesnot bootup....
and now it shows some S/W Upgrading with red colour background
plz help me out:crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Mine did not upgrade successfully, but I have the exact same problem. On day three of waiting for a callback from Pantech on the issue. They are supposedly talking to the techs in Korea about it.

Maybe solved!
tajlund said:
Mine did not upgrade successfully, but I have the exact same problem. On day three of waiting for a callback from Pantech on the issue. They are supposedly talking to the techs in Korea about it.
Click to expand...
Click to collapse
Don't know if this is going to help, but I had the problem (as I described) red S/W Upgrading and couldn't do anything. Well, after about two weeks of sitting with the battery out, I decided to redownload and rerun the Pantech update app, and lo and behold, it fixed my phone. It also installed a more up to date version of Android 4.0, I went from 4.01 to 4.04.
This is after running the updater a good 30 or so times the past two weeks hoping for anything to work, now today, bam, it works fine.
I would recommend anyone in this situation give the most recent updater a try, it may solve your problem.

need help with my burst!!!!!
Hey! i have a pantech burst and i love it! but i had to reset it and now it wont work. my exhusband root it a few months ago....and he deleted the keyboard and the launcher..... so.... when i turn it on i cant do anything cause i cant write .... and if i skip the android start menu i cant see anything cause i dont have a launcher.... please someone help! what can i do?

:crying: Bricked my phone total unable start. any hardware diagnostic tool or manual reset button.
please help urgently

needhelppantech said:
Hey! i have a pantech burst and i love it! but i had to reset it and now it wont work. my exhusband root it a few months ago....and he deleted the keyboard and the launcher..... so.... when i turn it on i cant do anything cause i cant write .... and if i skip the android start menu i cant see anything cause i dont have a launcher.... please someone help! what can i do?
Click to expand...
Click to collapse
would you like to sell it cheaper rate???

Bricked Pantech Burst Stuck in S/W Downloading Mode and completely wiped ...
Ok I am having a similar issue guys. Last night I had to wipe my phone because it was overly full and I switched providers and the phone had become unusable. I tried using clockworkmod to do this and it wiped everything ( including clockworkmod. ) Now I only get a S/W Upgrading screen with a red box. I tried using the pantech download tool and the PANTECH_PRESTO_BIN_JUUS03122012.pdl file. It did appear that it was installing it but then it became stuck at the very very very end of things. I basically had to take the battery out to do anything at all as I had left the phone on all night to download the pdl file but without any luck.
When I reboot the phone it had the S/W Upgrading mode with the red screen. I've tried all of the different key combinations on the pantech burst etc volume up + volume down and power, volume down + power, volume up + power. None of these things will reboot the phone.
I am hoping I can use the pantech download tool to install a different pdl instead and possibly get it working that way. I know that when the phone is off if I plug it into usb then the screen lights up on it with the S/W Upgrading screen and the red box. If I press the power button or any other combinations of buttons + the power button it also does this. It literally will not do anything else.
I cannot use pantech pc suite because the phone originally was so unusable I could not put the android apk file on the phone even though I have it on my laptop.
I tried using adb and fastboot and it will not even find my device through ANY usb port on the laptop. I've tried deleting and reinstalling the drivers over and over. The only thing I know to do is reboot afterward and hopefully it will find my phone on usb with adb. If I can just get to a bootloader or flash functional firmware onto this phone I think I could get it working but I do not know enough about the pantech burst to try physically jumping anything on it in order to hard reset it.
So my only options right now look like maybe get a different pdl, possibly reboot and the drivers may find my phone, or JTAG this thing.
I can't put it in usb debugging mode because it won't boot. Since adb does not even find the device as being attached it seems as if this phone should be operating in a different port mode or something to make it visible. I could be wrong but I am hoping that rebooting fixes the driver issue and makes the phone visible.
I tried PDAnet also and once again it does not work because it cannot find the device. This could be a usb cable issue I suppose but I only have this particular cable I am pretty sure
I might try another cable as well...
Any other ideas ? Am I going to have to JTAG this thing or should it be fixable using the download tool and a different pdl ? Or do I need to find another way to completely wipe the phone first and THEN use the download tool with the pdl file ?
It does get a bit confusing with so many mods, roms, and methods to recover android phones. If I can get the phone to boot then I can reload my backups and all should be well. I do need this phone for business purposes also. Any ideas guys ?
PS> I am also pretty decent with linux distros like arch or ubuntu so I would like to also know if it would just be better to do this in linux and possibly use linux to manually switch the phone to a different device mode to make it visible in the instance of there being nothing wrong with the drivers.
Thanks for any ideas or suggestions ...

UPDATE - progress ???
dsull1981 said:
Ok I am having a similar issue guys. Last night I had to wipe my phone because it was overly full and I switched providers and the phone had become unusable. I tried using clockworkmod to do this and it wiped everything ( including clockworkmod. ) Now I only get a S/W Upgrading screen with a red box. I tried using the pantech download tool and the PANTECH_PRESTO_BIN_JUUS03122012.pdl file. It did appear that it was installing it but then it became stuck at the very very very end of things. I basically had to take the battery out to do anything at all as I had left the phone on all night to download the pdl file but without any luck.
When I reboot the phone it had the S/W Upgrading mode with the red screen. I've tried all of the different key combinations on the pantech burst etc volume up + volume down and power, volume down + power, volume up + power. None of these things will reboot the phone.
I am hoping I can use the pantech download tool to install a different pdl instead and possibly get it working that way. I know that when the phone is off if I plug it into usb then the screen lights up on it with the S/W Upgrading screen and the red box. If I press the power button or any other combinations of buttons + the power button it also does this. It literally will not do anything else.
I cannot use pantech pc suite because the phone originally was so unusable I could not put the android apk file on the phone even though I have it on my laptop.
I tried using adb and fastboot and it will not even find my device through ANY usb port on the laptop. I've tried deleting and reinstalling the drivers over and over. The only thing I know to do is reboot afterward and hopefully it will find my phone on usb with adb. If I can just get to a bootloader or flash functional firmware onto this phone I think I could get it working but I do not know enough about the pantech burst to try physically jumping anything on it in order to hard reset it.
So my only options right now look like maybe get a different pdl, possibly reboot and the drivers may find my phone, or JTAG this thing.
I can't put it in usb debugging mode because it won't boot. Since adb does not even find the device as being attached it seems as if this phone should be operating in a different port mode or something to make it visible. I could be wrong but I am hoping that rebooting fixes the driver issue and makes the phone visible.
I tried PDAnet also and once again it does not work because it cannot find the device. This could be a usb cable issue I suppose but I only have this particular cable I am pretty sure
I might try another cable as well...
Any other ideas ? Am I going to have to JTAG this thing or should it be fixable using the download tool and a different pdl ? Or do I need to find another way to completely wipe the phone first and THEN use the download tool with the pdl file ?
It does get a bit confusing with so many mods, roms, and methods to recover android phones. If I can get the phone to boot then I can reload my backups and all should be well. I do need this phone for business purposes also. Any ideas guys ?
PS> I am also pretty decent with linux distros like arch or ubuntu so I would like to also know if it would just be better to do this in linux and possibly use linux to manually switch the phone to a different device mode to make it visible in the instance of there being nothing wrong with the drivers.
Thanks for any ideas or suggestions ...
Click to expand...
Click to collapse
--------------------------------------------------------------------------
OK quick update, I found the pantech burst upgrade tool and the burst-hack.cmd script
I managed to successfully find my phone with the upgrade tool and it completely ran its course and I am guessing it installed Ice Cream Sandwich.
My new problem is that the phone goes to the pantech logo boot screen if I plug the phone into usb but that is all it will do. If I unplug the phone and try to get into S/W Upgrade mode again or power it on it will not do anything at all. Basically the display only comes on when plugged in at this point so I am wondering if the battery is even charged or if it will charge. I read somewhere ( in the gizmolord forum ) that a guy had the same issue as me and he ran this tool for his pantech burst and then left the battery out for 2 weeks and tried to power it back on and it worked for him.
Is it possible that I just need to power the device down completely and let it completely discharge before it will reboot or is this thing bricked ?
I am thinking that either the battery needs to charge, or the phone needs to discharge and power down completely, or the phone could be bricked. I have a feeling it is not bricked because the update tool said everything was successful and no errors or anything.
I will try leaving the battery out for awhile and letting the phone discharge on its own and see what kind of results I get. I would think that 16 - 24 hours would be sufficient. Any ideas ?
---------------------------------------------------------------------------------------------------------------------
Ok so I did a bit more digging and research and found out that the culprit is most likely the poorly designed charging circuit in the pantech phones. I found a tech blog called Mikes Techblog where he shows how to solve this on a pantech jest phone with the same issue. The problem is that the battery is 3.7v and is currently reading 2.8v on the volt meter. The phone will not even attempt to charge until 3.7v is available on the battery because of how the charge circuit is designed. I am going to try the usb cable trick and usb adapter and see if I can monitor its progress with the voltmeter and get it back up to 3.7 volts. After this it should allow me to charge it normally and should boot just fine. It is showing the pantech logo which tells me that the firmware is there and isn't buzzing or doing anything else weird so more than likely this is related to the battery and not having enough of a charge when running the official upgrade tool. This problem probably had already existed prior running the update tool and is why the S/W Upgrading screen only would come up AFTER being plugged into a power source and would disappear immediately. If the battery had any charge whatsoever and if the phone could see it then I would see a screen that tells me to plug my phone in and charge it. I am thinking this is solved but will only know after I charge the battery. From what I've been reading in comments from others the battery issue is prevalent on many different pantech phones including the burst model. Other people with the pantech burst have said in comments on Mike's blog that this made their phone boot right up and said that this was EXACTLY the issue. Perhaps the best way to use these pantech phones is to never ever let them fully discharge the battery.

I got a big problem

Hello, today i was updating my O3D to the official ICS when suddenly my crappy dell computer crashed. The flash failed and now the only thing my phone does is vibrate and show the LG logo then within 1 second it shuts off. I tried different ressurection guides and all failed. Even with the LG recovery it doesn't work. It detects my phone as cdma device and flashing works but when i try to start i got the same problem.
Anyone experienced this problem??
Thank you!

have you tried to flash kdzfile?
Sent from my LG-P920 using xda app-developers app

luilak_ said:
Hello, today i was updating my O3D to the official ICS when suddenly my crappy dell computer crashed. The flash failed and now the only thing my phone does is vibrate and show the LG logo then within 1 second it shuts off. I tried different ressurection guides and all failed. Even with the LG recovery it doesn't work. It detects my phone as cdma device and flashing works but when i try to start i got the same problem.
Anyone experienced this problem??
Thank you!
Click to expand...
Click to collapse
Aside from hardware damage , which is not likely , O3D is unbrickable.
You're probably not doing it right.
If it gets to the bootloader which is running under that lg logo you speak of , that means it's not totally bricked.
If it just shuts off than that means , it can't load the system partition because it's filesystem is either corrupted or nonexistent.
That's a good sign , that means it's looking for it , and if the bootloader is there , that means it can probably get into download mode without external help.
So , you need to get into download mode and flash a bin rom to your device.
Download LG Flashtool and install the correct drivers listed and linked in the resurrection guide.
Load the dll and the rom to it then press ready.
Use the resurrection guide to get into download mode , you can skip the part "omapboot" to get into download mode if you can get into download mode without it. (Remove the battery press the vol + button and you hear a connected then disconnected , then in the second connected you plug the battery in.) If you installed the drivers correctly it will get into download mode. If it doesn't start over , you probably did something wrong or you need omapboot.
Don't worry i faced a couple of scary and frustrating hours in my first time but you'll get through.
Use the guide for everything you need.
Alternatively , you can always take it to your LG Service Center...

[SOLVED]Bricked phone

Hi I want to know how can I unbrick my Samsung galaxy s 4g. I believe I bricked because now when I turned on only stock in the logo. Please can you help me with this. I'm leontx's wife. Thanks

If it's just showing the logo and it's there for over 15 minutes, you'll probably need to reflash something.
I'd suggest using one of the one-clicks from http://forum.xda-developers.com/showpost.php?p=19601810&postcount=2 and I'd probably suggest the second (Basic with a Twist) choice.
First, you need to get the phone into download mode. Easiest way to do that is to unplug USB cable, pull the battery out, plug the battery back in, and plug the phone back to the computer. Hold the volume buttons on the left and turn on the phone (while holding down the buttons). It should ask you if you want to go into download mode. Press volume+ to confirm, then unplug the phone from your computer and plug it back in (to make the computer realize that there's a device there). Now run the one-click to reflash your phone. If the flash fails, restart the phone and try again. If the phone reboots to a screen showing a little phone and a yellow warning sign, perfect... just flash it again. That's the alternate download screen, and I get it everytime I use Heimdall/Odin/Kies to flash it.

couldn't get into download mode
Hello,thanks for you help,I'm trying to fix my wife's galaxy s after she wiped and factory reset the phone when tried to recovery by herself.Now the phone is stock in the galaxy s 4g logo forever,I tried to get into recovery or download mode but i couldn't.She told me that the phone was giving her a error message about the keyboard app,then she removed the batt and put it back, the battery showed her almost dead like 1% when was like 79% few seconds before,then she called t-mobile and the person told her to do the recovery mode with the bottoms, she did it and the person ask how much batt the phone had, she said 79%.then the person sugested to full charge the batt,and call them(tmobile) back.So here we go... lol:laugh:.She tried to fix it and got into recovery mode and wiped and factory reset the phone,I dont know what she was doing and removed the batt to reboot the phone.and here we are now.When try to get into download mode the pc not recognize it say USB device not reconognized and the phone just show a loading logo but nothing happen.I just want to know if is possible to fix this or toss it,the phone is rooted with a custom rom,I tried with another batt but the same results.Im realy want to recover this phone to give it to my mother in law thank you so much

Leontx said:
Hi I want to know how can I unbrick my Samsung galaxy s 4g. I believe I bricked because now when I turned on only stock in the logo. Please can you help me with this. I'm leontx's wife. Thanks
Click to expand...
Click to collapse
i soft brick may phone yesterday, i use to flash my current rom and then reflash it again [clean flash] i just reflash it to save my game replay..
if you can boot into recovery mode, reflash your current rom and then backup and wipe everything exept sdcard then flash again.

Sounds like the battery crapping out on you & crashing while it was doing something important. Usually, a factory reset and new battery can fix. But, If the reset failed, it's not a biggie. find any of the one clicks that you might like to try (lumin30 has a awesome guide/thread w/ links). Batteries are cheap. Sometimes they will swell up when they die. If it spins easy when placed on flat surface is an easy check. There are a couple threads with links to 10 buck replacements around too.
Sent from my NookTablet using xda app-developers app

eureka !!!
my phone is alive.I could put it in download mode by removing the batt,put it back then holding both volumes bottoms,then connecting the phone to my pc(USB),no power bottom.and voila after putting this in download move everything else is piece of cake thank yall.

[Q] Ok so my device is not quite dead but close please help

Hi Everyone,
I've come on bended knee, and I have about 30 xda windows up where Ive tried to upgrade a perfectly working LG from android 2.2. But no matter what I try I cant get beyond the LG wink icon on the screen.
I have tried fastboot omao4boot 1.22 modified etc but I cant get past MLO (x-loader) I say YES to this but NO to 'fastboot devises' as per instructions (although why I say no to this, I dont know?) anyway it just says 'waiting for device' but nothing happens even if I take the battery out and disconnect from USB and reconnect, nothing ever happens?
So having redone the fastboot procedure, I managed to into boot mode - yellow round icon on screen and then tried to flash using LG flash tool 1.2 with LGP920 30A bin & fls files which it does and completes successfully, I have also used the LG recovery tool to flash recovery and firmware but all of the above wont let me boot the devise it just sits at the LG Icon.
Tried booting into recovery with 3d + vol + key but just ignores and goes to red LG Icon with the usual boot sound, I just cant get anything else to work! Is it down to the MLO loader issue. I dont know what else to do.
Please can anyone help me recover my phone I wanted to upgrade to JellycreamR5 cause its suppose to be a good rom but nothing now works :crying:
I know its not a busy forum now days and most have moved on, but please any assistance to get this beautiful phone going again would be brilliant.
Thanks for the time to read about this dilemma!
ATB

Ok, so if it boots to the LG logo with boot sound it is probably nothing wrong with bootloaders. It is either the system or just something incompatible on the data partition. Of you can make it too recovery try factory reset

Ok I think Ive fixed it!
Did lots of things to try to get to work, but heres roughly the guide.
Used 'rebooter' for Optimus 3d which saved the phone in the 1st instance, it was the only flasher that completed the flash... but remember 1st unplug the phone but micro usb in then remove the battery, then hold the + vol key and insert into the Win XP computer usb, I had already prepared and ran the rebooter.bat file which was waiting for omao device. Once detected keep hold the + key add battery when it says wait 5 secs, dont let the key go, say NO to flash boot but yes to the rest. It will say job done or words to that effect.
Turn on phone holding just the + key to get into download mode. Change the LGE CDMA USB SERIAL PORT to com41 in control panel device manager, refresh search for new hardware to check updated port.
Then use LG Flash to flash V3.0A which worked !
Disconnect the phone remove battery and reinsert, reboot devise, it will boot in TWRP which isnt great but good enough for flash, loaded a Rom onto the sd card and installed the software, after the usual clearing everything like Delvick/Settings etc.
Job done, rebooted and worked, still got TRWP on the boot loading would prefer Clockwork but never mind, had enough of fiddling and just enjoying having my device back
Havent tried a sim in it but might have to to the IMEI fix but hoping not.
Many thanks for your input, I know tech moves on, but there is a wealth on knowledge on these devices and it just seems to be lost in the ether.
Best wishes.