Related
Hi guys, does someone have a lead on howto root this device or place the google play store on it. I have tried different apk's for the store but they all end in "unfortunately play store stopped working" I would appreciate some help. If there is none available yet, so be it. thx in advance
I am not sure if the best way to root would be getting an app from the play store. I have always just trusted manual root. Have you tried using superoneclick? It is just one click to root with that program.
Sorry if this doesn't help. Hit thanks if it did.
erwincmv said:
Hi guys, does someone have a lead on howto root this device or place the google play store on it. I have tried different apk's for the store but they all end in "unfortunately play store stopped working" I would appreciate some help. If there is none available yet, so be it. thx in advance
Click to expand...
Click to collapse
I can not English. Czech Republic. I did it by this. it works. I tried to load other ROM but china. no multilanguage probably is not. solve it on some Russian forum.
http://www.fight.org.ua/publication...yu_Root_i_proshivke_Recovery_Lenovo_A789.html
:good::good::good::good::good:
---------- Post added at 10:58 AM ---------- Previous post was at 10:49 AM ----------
yet there is also something with the ROM
http://www.tinhte.vn/threads/1470390/
I have tried and it is not much of anything is not working Market, GSM banking. MoreLocale does not help. Again I installed a backup
---------- Post added at 11:07 AM ---------- Previous post was at 10:58 AM ----------
is there and how to enable Market
http://forum.china-iphone.ru/viewtopic.php?f=31&t=21726&start=40
:good:
lenovo A789
http://www.theandroidsoul.com/download-google-play-apk-3-5-19/
http://www.youtube.com/watch?v=alZHGDZYf3g
gooooooooooooooooooooogle
I am working on a ROM for the A789.
But rooting may be easier. Do you have a working recovery on the phone?
Turn off phone, remove battery, reinsert battery, Turn on phone while pressing *both* volume buttons: *HOWEVER* you need to press the power button slightly before (.5 sec) you press both volume buttons.
If you have a working recovery, to root may be as simple as installing the "CWM installable ZIP" from Chainfire.
If you do not have a recovery, then please follow me here, I am working on a ROM, but no promise on speed.
Rooting
cybermaus said:
I am working on a ROM for the A789.
But rooting may be easier. Do you have a working recovery on the phone?
Turn off phone, remove battery, reinsert battery, Turn on phone while pressing *both* volume buttons: *HOWEVER* you need to press the power button slightly before (.5 sec) you press both volume buttons.
If you have a working recovery, to root may be as simple as installing the "CWM installable ZIP" from Chainfire.
If you do not have a recovery, then please follow me here, I am working on a ROM, but no promise on speed.
Click to expand...
Click to collapse
I'm able to get into recovery but cannot flash anything because I cannot get the damn thing rooted. The market is still not working in any possible way, backuped apk's from my asus tf101. In general I like the phone, it's quite fast for the price and works well and would have kept it factory clean as the damn google store would work!
New Lenovo A789 firmware
New Lenovo A789 firmware, A789_S227_120828. It can be found on mobileuncle, bbs.lenovomobile etc.
erwincmv said:
I'm able to get into recovery but cannot flash anything because I cannot get the damn thing rooted. The market is still not working in any possible way, backuped apk's from my asus tf101. In general I like the phone, it's quite fast for the price and works well and would have kept it factory clean as the damn google store would work!
Click to expand...
Click to collapse
Read again: If you can get into recovery, *then* you can simply root it by applying chainfire's zip package as linked above. Or at least, if you have a proper recovery. By which I mean not the factory one. If you are not sure, post a photo of the recovery.
I'll check out that new S227 package, thanks
Rooting
cybermaus said:
Read again: If you can get into recovery, *then* you can simply root it by applying chainfire's zip package as linked above. Or at least, if you have a proper recovery. By which I mean not the factory one. If you are not sure, post a photo of the recovery.
I'll check out that new S227 package, thanks
Click to expand...
Click to collapse
It was indeed the factory recovery which screwed up rooting, I used the method from mobileuncle and everything went fine now. Thx to all for your support, it's greatly appreciated. Will als check out the new S227 ROM ASAP
rooting
@ Cybermaus, for some reason I'm not able to post "http://forum.xda-developers.com/showthread.php?t=1874403". I have flashed your ROM, it flashed ok regarding the flash tool, it boots up with the animation described in your topic but it hangs on the lenovo logo. I have let it there for more then 10 minutes because I know booting after a new ROM flash can take sometime. Did you hear something similar for an A789 or even for an A750? My previous installed ROM was the "Apkhot_lenovo789_4.0.4_0808+" which ran fine. Thx for a reply
@ Cybermaus: Regarding A789_S227_cybermaus_V2: Lenovo Security and Lenovo (Go) Launcher can easily be removed once i installed your firmware? Because i want a clean firmware and go from there.
ROM working thanks Cybermaus
I managed to flash the ROM and am using it now - No problems so far.
The only difficulty I have is getting the A789 to connect in USB debugging mode.
I needed to install and run some Chinese software to get it to connect WandouJia without this the phone wouldn't connect to the PC
subsequently have found a more English version SnapPea but if this is not running can't connect when USB debug is turned on
Lenovo Calendar still gives me headache
I have rooted my A789 and installed the GApps which worked for me perfect, except of the calendar.
I still have the Lenovo Calendar App that synchronizes with the Google calendar, but doesn't update the alert. The alertt is always "On time" although it is in Google normally 10 minutes ahead or different. i have changed alert times in Google and also in the Lenovo Calendar app, with no success. It only synchronize the time date, description but not the alert time.
I thought maybe I shoudl remove the Lenovo Calendar App and install again the GApps to get the Google Calendar App.Any hints on this?
I wouldn't like to replace the stock ROM for the CyberMaus.
Anyway, you are correct, same problem in my rom
Sent from my Lenovo A750 using xda app-developers app
Ηι. I m going to buy this phone. I won't to root it so that google play works. How can i do it? Superoneclick works?
New ROM A789_ROW_S105_cybermaus_ICS_v3
I have flashed the new ROM A789_ROW_S105_cybermaus_ICS_v3 and it looks far way better. Calendar is fine, but i can't sync the calendar with my Google Account. All other syncs with my Google account work, but for the calendar I get always "Sync is currently experiencing problems. It will be back shortly" But after 2 days it is still the same. I have wiped the calendar data removed Google account and re-inserted it. But the issue remains. Any idea?
(I can't post in the ROM Thread, because I am still a newby.
---------- Post added at 01:07 PM ---------- Previous post was at 12:56 PM ----------
gerstavros said:
Ηι. I m going to buy this phone. I won't to root it so that google play works. How can i do it? Superoneclick works?
Click to expand...
Click to collapse
In this thread: http://forum.xda-developers.com/showthread.php?t=1874403
there are the instructions how to root.
swenzel said:
In this thread: http://forum.xda-developers.com/showthread.php?t=1874403
there are the instructions how to root.
Click to expand...
Click to collapse
thank you!
After some tries I managed to get the calendar running with the new ROM A789_ROW_S105_cybermaus_ICS_v3, but I had to do a factory reset. Just wiping the calendar data didn't help in my case. Anyhow now it is perfect. Thanks Cybermaus.
andrea_d86-lenovoa789-4.0.4
My update contains root and also a lot of stuffs
Here http://forum.xda-developers.com/showthread.php?t=1958905
andrea_d86
Flash error
Hi there,
I followed the instructions for rooting my A789, but after the red progress line reaches 100% (and my phone connected without its battery) I get an error message.
Any ideas?
A lot of people compaints that Huawei is not updated U10 with kitkat
well the good news is, you can take a little bit trouble and update it to not only kitkat but to Emui 3.0 which makes your phone running par to Ascend mate7
Vcom drivers
https://mega.co.nz/#!B0IwlIJY!yZgoPULm7XV9klgmdFB_A6zymqCq9u0Z_z3sJEkQjgc
MKT Droid Tool
http://www.mediafire.com/download/6z9acf5um65cuj2/MtkDroidTools+v2.5.3.zip
B113 4.2.2 base with unlocked bootloader
https://drive.google.com/file/d/0Byj7mTAqkRdwUVd4ZDdiYTBUQjA/edit
Root Genius to root your device
http://www.shuame.com/en/root/
Gaaps to flash immediately after you flash Kitkat rom
https://mega.co.nz/#!F9QhHYRS!ZfP5w9SdbWUcyptA8_hlfPReeK0gWxQsnC95ASmMRrY
G750-T00 kitkat base
https://drive.google.com/open?id=0B3kPp0_1ym9ceGJ0NThKbFVoMzA
Rooted with twrp recovery inbuild base rom
https://drive.google.com/file/d/0Byj7mTAqkRdwcDRJSEdJb244M0U/view
Here we go.
Download all the above files.
1) Root your device with Root Genius (at time's it might take several attempts so do not give up)
2) as soon as you root, go to the playstore and install super su by chainfire. let super su take over the kingroot because i personaly feel Super Su give's the full root.
3) one's you have super user, open it and make sure its functioning.
4) now install MKT Droid tool and backup your NVRAM for which you got to install Vcom drivers to recognise the device. best OS is Win7 32bit to get things straight. incase if the device is not recognised, reboot your PC and try again.
5) One's MKT Tool recognises the device, install adbd on the mobile. it's a paid version. (you know how to get it)
6) open adbd it's in chinese. tik all the boxes in adbd and close.
7) now click on root button at the bottom of MKT Droid tools. it's initially in yellow color. untill it becomes green, you cannot backup NVRAM (this is your esf and imei which you are going to loose after flashing kitkat rom from different mobile brand)
8)after you succeed backup up the NVRam, you did the toughest job of all time.
9)now flash G750-T00 Rom with flash tools which you are going to find in the last link i've provided. search net how to flash with flash tool.
10) after flashing the base, you will loose the network. first thing you got to do is root your mobile with root genius. then install playstore. google for playstore apk. install playstore, sign in with your gmail id and install adbd again. (if you do not want to install play store you know the black way to do it.) one's you install the adbd, tik the boxes and go to MTK Droid tools to restore the NVRAM. which will bring back your network connections.
11) one's you get the network, flash the 251 base as per the last link provided. this one comes with many goodies like twrp, 3minit battery mode etc. one's you flash this base, go to backup and reset and factory reset your phone to gain access to GPRS. it will fix by itself.
12)reboot into twrp and flash gapps.
Enjoy the Rom. EMUI 3.0 is smooth and changing lockscreen wallpapers will blow your mind. over all the mobile drastically changes from mid-range experience to flasgship experience
there after you can flash any custom roms available on chinese site for T20
Hi @jacktackle, good day!
First of all, excuse me for asking noob questions. I'm new here and I really have limited knowledge about smartphones.
I just wanna ask if this would work on my phone? Will my phone be completely rooted? Because I tried several rooting softwares, and everytime I restart my phone I always lose my root access.
Again, sorry for my noob questions. I would really appreciate your help!
Sent from my HUAWEI G750-T01 using XDA Free mobile app
jacktackle said:
A lot of people compaints that Huawei is not updated U10 with kitkat
well the good news is, you can take a little bit trouble and update it to not only kitkat but to Emui 3.0 which makes your phone running par to Ascend mate7
Click to expand...
Click to collapse
Give credit to the actual people who had done the work!
---------- Post added at 02:18 AM ---------- Previous post was at 02:05 AM ----------
spaceman0423 said:
Hi @jacktackle, good day!
First of all, excuse me for asking noob questions. I'm new here and I really have limited knowledge about smartphones.
I just wanna ask if this would work on my phone? Will my phone be completely rooted? Because I tried several rooting softwares, and everytime I restart my phone I always lose my root access.
Again, sorry for my noob questions. I would really appreciate your help!
View attachment 3180293
Sent from my HUAWEI G750-T01 using XDA Free mobile app
Click to expand...
Click to collapse
Last time I checked, there are no questions regarding full root, read: http://forum.xda-developers.com/showthread.php?t=2620608&highlight=t01&page=303
mtvtitan said:
Give credit to the actual people who had done the work!
---------- Post added at 02:18 AM ---------- Previous post was at 02:05 AM ----------
Last time I checked, there are no questions regarding full root, read: http://forum.xda-developers.com/showthread.php?t=2620608&highlight=t01&page=303
Click to expand...
Click to collapse
@mtvtitan, good day kababayan! I'm very sorry I really have limited knowledge about this stuff.
can you help me? a detailed tutorial would be a big help! Thanks!
this is been tested on only G750-U10
i do not know whether root genius works for other bases.
and yes, i found this guide on a russian site. translated with google and presented it on XDA for the people who are strugling to get to kitkat. plus many things arn't explained in the russian site whih i figured by myself.
so please respect we do free job here to help other's who are like us.
spaceman0423 said:
@mtvtitan, good day kababayan! I'm very sorry I really have limited knowledge about this stuff.
can you help me? a detailed tutorial would be a big help! Thanks!
Click to expand...
Click to collapse
Pare, you got to have sleepless nights to be a moderate flasher. search search search and search for answers. welcome to the XDA it's a ocean of knowledge. hope you will learn to swim.
U10 to T00
Hello Jacktackle,
Does this procedure works with stck B119?
Thank you in advance.
jacktackle said:
A lot of people compaints that Huawei is not updated U10 with kitkat
well the good news is, you can take a little bit trouble and update it to not only kitkat but to Emui 3.0 which makes your phone running par to Ascend mate7
Download all the above files.
1) Root your device with Root Genius (at time's it might take several attempts so do not give up)
2) as soon as you root, go to the playstore and install super su by chainfire. let super su take over the kingroot because i personaly feel Super Su give's the full root.
3) one's you have super user, open it and make sure its functioning.
4) now install MKT Droid tool and backup your NVRAM for which you got to install Vcom drivers to recognise the device. best OS is Win7 32bit to get things straight. incase if the device is not recognised, reboot your PC and try again.
5) One's MKT Tool recognises the device, install adbd on the mobile. it's a paid version. (you know how to get it)
6) open adbd it's in chinese. tik all the boxes in adbd and close.
7) now click on root button at the bottom of MKT Droid tools. it's initially in yellow color. untill it becomes green, you cannot backup NVRAM (this is your esf and imei which you are going to loose after flashing kitkat rom from different mobile brand)
8)after you succeed backup up the NVRam, you did the toughest job of all time.
9)now flash G750-T00 Rom with flash tools which you are going to find in the last link i've provided. search net how to flash with flash tool.
10) after flashing the base, you will loose the network. first thing you got to do is root your mobile with root genius. then install playstore. google for playstore apk. install playstore, sign in with your gmail id and install adbd again. (if you do not want to install play store you know the black way to do it.) one's you install the adbd, tik the boxes and go to MTK Droid tools to restore the NVRAM. which will bring back your network connections.
11) one's you get the network, flash the 251 base as per the last link provided. this one comes with many goodies like twrp, 3minit battery mode etc. one's you flash this base, go to backup and reset and factory reset your phone to gain access to GPRS. it will fix by itself.
12)reboot into twrp and flash gapps.
[/SIZE][/FONT][/COLOR]
Enjoy the Rom. EMUI 3.0 is smooth and changing lockscreen wallpapers will blow your mind. over all the mobile drastically changes from mid-range experience to flasgship experience
Click to expand...
Click to collapse
Hello Jacktackle,
This procedure also works for stock B119?
Thank you in advance.
Thanks Jacktable. Just did it up to 8). Can you help wirth 9)?
I mean, Thanks Jacktacle.
Can you help with 9)
8)after you succeed backup up the NVRam, you did the toughest job of all time.
9)now flash G750-T00 Rom with flash tools which you are going to find in the last link i've provided. search net how to flash with flash tool.
10) after flashing the base, you will loose the network. first thing you got to do is root your mobile with root genius. then install playstore. google for playstore apk. install playstore, sign in with your gmail id and install adbd again. (if you do not want to install play store you know the black way to do it.) one's you install the adbd, tik the boxes and go to MTK Droid tools to restore the NVRAM. which will bring back your network connections.
11) one's you get the network, flash the 251 base as per the last link provided. this one comes with many goodies like twrp, 3minit battery mode etc. one's you flash this base, go to backup and reset and factory reset your phone to gain access to GPRS. it will fix by itself.
12)reboot into twrp and flash gapps.
9 is flash tool. search for how to flash its there all over xda or google.
ok there you go guide attached. but do not fully rely on the guide. more focus on my instructions.
Works
Thanks.
I converted my phone from u10 to t00.
Running KitKat.
hy,
i have problems with flashing.
im trying and searching web for days now but i cant get out.
if i select download with flash tool everythink is ok, but if i plug in my phone nofing happens, and i installed the drivers i thionk cause i my phone is on the driver shows up in the device manager.
and when i plugin iin my phone( without battery) the progress bar doesnt change it even doesnt turn in red so pls help
Cant update with SP flash tool
I am now on b116 so I am trying to downgrade using the b113 scatter through SP flash tool. I installed all the VCOM drivers succesfully (I think its in my device manager) but when I download using SP flash tool this happens using the following steps.
1. I click download
2. I put my battery in.
3. Phone connects.
4. Sp flash tool says: Download DA 100% after that phone disconnects
5. Phone connects
6. Phone disconnects
7. SP flash tool error : S_Brom_Download_Da_fail (2004)
8. Phone boots up charching screen.
Can someone please help me fix this if possible?
I am on windows 8.1 and I installed Vcom drivers this way
Thanks in advance!
jacktackle said:
A lot of people compaints that Huawei is not updated U10 with kitkat
well the good news is, you can take a little bit trouble and update it to not only kitkat but to Emui 3.0 which makes your phone running par to Ascend mate7
Vcom drivers
https://mega.co.nz/#!B0IwlIJY!yZgoPULm7XV9klgmdFB_A6zymqCq9u0Z_z3sJEkQjgc
MKT Droid Tool
http://www.mediafire.com/download/6z9acf5um65cuj2/MtkDroidTools+v2.5.3.zip
B113 4.2.2 base with unlocked bootloader
https://drive.google.com/file/d/0Byj7mTAqkRdwUVd4ZDdiYTBUQjA/edit
Root Genius to root your device
http://www.shuame.com/en/root/
Gaaps to flash immediately after you flash Kitkat rom
https://mega.co.nz/#!F9QhHYRS!ZfP5w9SdbWUcyptA8_hlfPReeK0gWxQsnC95ASmMRrY
G750-T00 kitkat base
https://mega.co.nz/#!Nwpziara!9y1VitCix5Vx_6zwPtGpB6mTxlpHEAxIqUODCz4dl-s
Rooted with twrp recovery inbuild base rom
https://drive.google.com/file/d/0Byj7mTAqkRdwcDRJSEdJb244M0U/view
Here we go.
Download all the above files.
1) Root your device with Root Genius (at time's it might take several attempts so do not give up)
2) as soon as you root, go to the playstore and install super su by chainfire. let super su take over the kingroot because i personaly feel Super Su give's the full root.
3) one's you have super user, open it and make sure its functioning.
4) now install MKT Droid tool and backup your NVRAM for which you got to install Vcom drivers to recognise the device. best OS is Win7 32bit to get things straight. incase if the device is not recognised, reboot your PC and try again.
5) One's MKT Tool recognises the device, install adbd on the mobile. it's a paid version. (you know how to get it)
6) open adbd it's in chinese. tik all the boxes in adbd and close.
7) now click on root button at the bottom of MKT Droid tools. it's initially in yellow color. untill it becomes green, you cannot backup NVRAM (this is your esf and imei which you are going to loose after flashing kitkat rom from different mobile brand)
8)after you succeed backup up the NVRam, you did the toughest job of all time.
9)now flash G750-T00 Rom with flash tools which you are going to find in the last link i've provided. search net how to flash with flash tool.
10) after flashing the base, you will loose the network. first thing you got to do is root your mobile with root genius. then install playstore. google for playstore apk. install playstore, sign in with your gmail id and install adbd again. (if you do not want to install play store you know the black way to do it.) one's you install the adbd, tik the boxes and go to MTK Droid tools to restore the NVRAM. which will bring back your network connections.
11) one's you get the network, flash the 251 base as per the last link provided. this one comes with many goodies like twrp, 3minit battery mode etc. one's you flash this base, go to backup and reset and factory reset your phone to gain access to GPRS. it will fix by itself.
12)reboot into twrp and flash gapps.
Enjoy the Rom. EMUI 3.0 is smooth and changing lockscreen wallpapers will blow your mind. over all the mobile drastically changes from mid-range experience to flasgship experience
Click to expand...
Click to collapse
Dear brother, does this update improves the sound quality? Have u noticed, any ideas?
Curious
Is there anyone did this?
venervitz1213 said:
Is there anyone did this?
Click to expand...
Click to collapse
Me :good:
G750-U10
can any one make a video of the full process please ...........i see that a lot of people needs it including me
thanxx
How did it go?
Did you face any difficulties or any observations? How is it working now?
rdrai said:
Me :good:
Click to expand...
Click to collapse
Is there are any bug that you get?
Note: This Tutorial is for the Lenovo S8 A7600(M) MOBILE Only! Theres a Tablet named the same, dont get confused.
Warning: Your Warranty is void. I am not responsible for any kind of bricks or software failure! Only for MTK6752 ! And not for the same Numbered Tablet. this guide is for the Phone.
The Lenovo S8 7600 Golden Warrior is a very nice phone with some quite good specs. Only cons I could find was that it has none of community and tons of bloatware which is unremovable. Yet!
Lets root it, Guys.
You Need:
Model A7600 Only:
1.The Lenovo Firmware including Chinese TWRP which is provided here by me:
(Thats the only one i could find. If anyone is Brave enough to make an English Version and wants to upload it for this thread fell free to do it.)
Firmware:
https://drive.google.com/file/d/0Bzt5QqUHjbg3SzZWVElUeXpyekU/view?usp=sharing
English TWRP:
https://drive.google.com/file/d/0Bzt5QqUHjbg3azNMbGcxdXlNSDg/view?usp=sharing
Chinese TWRP:
https://drive.google.com/open?id=0Bzt5QqUHjbg3TDl2X2FqS21BR00&authuser=0
Model A7600M:
Firmware:
https://drive.google.com/file/d/0Bzt5QqUHjbg3elY2SzA2S1c2REk/view?usp=sharing
TWRP Recovery(Chinese):
https://drive.google.com/file/d/0Bzt5QqUHjbg3aXRTMkFSczZoZWM/view?usp=sharing
2.SP Flash Tools. This will be Needed for flashing the Sock Rom Incl. Recovery. Version 5.13xxxx Minimum Requied.
http://www.mediafire.com/download/zx5m9mp3x5p413h/SP_Flash_Tool_v5.1452.00.zip
3. The Meadiatek Driver(Explains itself i think)
http://d-h.st/1PN
4. The SuperSU.ZIP (Thanks Chainfire, we love you)
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
5.(optional) If you want to use the Google Apps i recommend Downloading the GApps Mini for 5.0 from this thread:
http://forum.xda-developers.com/android/software-hacking/gapps-mini-t3089612
Now Lets get Started:
1. Unzip the Driver Package and Run the Exe. After Installation, restart you Computer. If using Windows 8, disable Signaure Driver Enforcement.
2. Turn Off you device. Open the SP Flash Tools Folder and run Flash_tool.exe as Administrator.
3. Now Unzip the VibeUI Firmware Package. In SP Flashtools klick on Scatter Load. Navigate to the VibeUI Folder and choose the MT6752_Android_scatter.txt.
Edt: Some People Including me had Problems with the Scatter File. However, If getting errors, try creating your own scatter file referring this thread: http://forum.xda-developers.com/showthread.php?t=2151251
4. Check if every Downloadfile exept the System is Checked, else you will get an error.
5.IMPORTANT: Go to settings, Download and CHECK the DA DL All with Checksum.
6. Klick on Download.
7. NOW the Tricky Part. Remove the Battery. Insert it again. Now leave the Phone Turned off and plug the USB Cable in, but holding the Volume UP button.
8. If you get a Red Bar and a Yellow followed by some grey in SP Flash tools you have done it right. If the Flash was successfully, you will get a green tick mark as passed.
9. Now unplug USB and take the battery out and pop it in again. Boot the Phone. Dont get shocked if it doesn't boot up fast, it usually takes about 6-8 Minutes. Be Patient!
10. If the Phone Boots up successfully, configure it and Connect it as a MTP Device on the Computer.
11. Now Copy the GApps.zip and the SuperSu.Zip to the Root of the Phone Memory.
12. Boot into Recovery (Holding VOL UP AND DOWN while turning the Phone on) and flash the two Zips. Its in Chinese but you will
only need to flash it once. Flash Zip is the Upper Left Button. Choose your GappsZip and use the Back Button to get to the main Screen. Now flash the SuperSA.zip.
13.Reboot. If you dont know how to just take off the battery ( Its quite risky so better try using the Buttons. The Layout is the same as in the English Version)
Finished!Now your Device is Rooted and got the Gapps on it. Download Titanium Backup and remove the Chinese Crap Bloatware. You are now the Master of your Device. I would be really happy about Donations, since It was very Hard to get Hands on these Roms and Recoverys.
INFO: Some People Complained about the lost IMEI, Thank you Soyer88 for the fix! Sorry that I was away for too long, I got my finals.
Soyer88 said:
For those of you who lost the IMEI address on this phone, or ANY other, here is simple guide witch solved my problem:
1. Download this http://www.4shared.com/file/aNRAdrvgba/sn_gen.html , or search sn_gen.exe (Dont worry, the program is not translated that isn't a problem)
2. In the ??IMEI 1 field write your original imei address (behind the battery)
3. Click on ??MP0B_001?? - It will create a file on your desktop named MP0B_001.
4. Copy the file in your phone, Install Root Explorer, send the file in data/nvram/md/NVRAM/NVD_IMEI/ and change the permission of the file (check all boxes)
5. Restart the phone.
Thats it ! This phone is very tricky to flash (or recover) , because of the chipset.. its very rare
I had a lot of problems to fix it, You have to use the right version of Sp flash tool !!!
Here is a russian forum with ALL the custom ROM's (including the official chinese) and support for this phone - http://4pda.ru/forum/index.php?showtopic=657464 it helped me a lot!
Click to expand...
Click to collapse
Be sure to donate him a Beer!
Thank you for tuto.
About ROM - it is have Multi Langue?
Great tutorial :good:, but what about people with MTK6752M?
rom corrupt
Hi, when i extract this rom i recive one message "system.img is damaged"
what can i do?
thank's a lot.
XxpikaachuuxX said:
Note: This Tutorial is for the Lenovo S8 7600 MOBILE Only! Theres a Tablet named the same, dont get confused.
......................
.
Click to expand...
Click to collapse
Hey
Could someone tell me what to do? I flashed a rom and recovery via Sp Tool (not from this guide) on my S8 A7600. It was a custom rom with removed bloatware I found on a Russian site (google translate).
Now I find that my baseband is unknown and no IMEI's either. I didn't notice this in the beginning though, I did root the phone first and cleaned up even further with Titanium Backup, including the default phone and
contact apps.
Don't know if this could have had an impact or not, but my impression is that it has to do with modem driver, which might be a different one (it seems the custom rom was built from chinese rom). Both scatter files (rom and recovery) does not seem to touch the nvram area, although this mtk flashing stuff is completely new to me.
Have any tips? This chipset is new for IMEI repair, so is unsupported from what I gather.
I flashed another rom I found and the IMEI came back, hurray :laugh:
Good to know its not some permanent lame fault the mtk engineers would have missed (unlikely). Well now back to customizing romz, the default lenovo rom is far from what I consider usable.
NIKO_BG said:
Great tutorial :good:, but what about people with MTK6752M?
Click to expand...
Click to collapse
I will upload the MTK6752M Rom too. But you will have to wait 3-4 weeks since im at vacation at the moment. I will also Provide CWM for both models then. Greets
askermk2000 said:
I flashed another rom I found and the IMEI came back, hurray :laugh:
Good to know its not some permanent lame fault the mtk engineers would have missed (unlikely). Well now back to customizing romz, the default lenovo rom is far from what I consider usable.
Click to expand...
Click to collapse
I actually like the Design tho. If i can ask, did you use my Stock rom from this thread?
XxpikaachuuxX said:
I actually like the Design tho. If i can ask, did you use my Stock rom from this thread?
Click to expand...
Click to collapse
Actually I think I said that wrong. I am now using this rom: VIBEUI_V2.5_ _USR_ST1524_5.1460.1_1506111858_MP6V3_CU_CN_otafull
This is the latest official stock rom directly from Lenovo. I was referring to one of the rom's that's flashed by those shabby vendors, full of adware, malware and viruses.
I was not aware of this situation as this is my first china phone.
To Op: No I did not use your Rom. I've tried a few others and the *Real* stock ota rom from lenovo was the best for me, also the latest stable build. I found it here btw: lenovo-forums.ru(can't post full link)
Also I'm looking for this: A7600_TWRP2.8.7.0_2015-07-18.7z <--- This is the only recovery I've found that has english language. It was posted on 4pda.ru but link is down. Also seen it on those chinese sites, but requires account to download.
askermk2000 said:
Actually I think I said that wrong. I am now using this rom: VIBEUI_V2.5_ _USR_ST1524_5.1460.1_1506111858_MP6V3_CU_CN_otafull
This is the latest official stock rom directly from Lenovo. I was referring to one of the rom's that's flashed by those shabby vendors, full of adware, malware and viruses.
I was not aware of this situation as this is my first china phone.
To Op: No I did not use your Rom. I've tried a few others and the *Real* stock ota rom from lenovo was the best for me, also the latest stable build. I found it here btw: lenovo-forums.ru(can't post full link)
Also I'm looking for this: A7600_TWRP2.8.7.0_2015-07-18.7z <--- This is the only recovery I've found that has english language. It was posted on 4pda.ru but link is down. Also seen it on those chinese sites, but requires account to download.
Click to expand...
Click to collapse
My Suggestion would be: Download and try my Rom and Recovery. Then download SuperSu/.Zip and try to flash it via Chinese TWRP which i am providing. you can locate the buttons from any other TWRP, even from other phones. If done, you could et root uininstaller and remove the crappy bloatware like i did. then install gapps
XxpikaachuuxX said:
My Suggestion would be: Download and try my Rom and Recovery. Then download SuperSu/.Zip and try to flash it via Chinese TWRP which i am providing. you can locate the buttons from any other TWRP, even from other phones. If done, you could et root uininstaller and remove the crappy bloatware like i did. then install gapps
Click to expand...
Click to collapse
I already have chinese TWRP, and I'm rooted. The rom I'm using also does not have any insidious bloatware, except a few chinese apps that don't even require root to remove. Besides I seem to remember the system.img file in your rom was corrupt, tried to download several times.
Just saw this at 4pda.ru:
Port of K3 Note VIBE 2.8 1530 A7600 5.1】 【07/15/25
Download: yadi.sk/d/ULLundAAi5dk6
Will upload the File again, sorry to hear that.
where do you download the latest firmware?this phone doesn t have ota?no need to use flash tool if it s the case..you can root it easily with an apk
so i don t understand you manip
Mine was really hard to root, none of Kinroot or any other tool/app worked.
so could you say use what did you use for rooting it?
i just to order one so i would like to erase all chinese apk
are you happy with this phone?
Like I said, the Rom provided here is Pre Rooted and has TWRP included. With twrp you can root any rom, but seems like the file is corrupt so ill have to upload it again as soon as i get home
XxpikaachuuxX said:
Mine was really hard to root, none of Kinroot or any other tool/app worked.
Click to expand...
Click to collapse
XxpikaachuuxX said:
Like I said, the Rom provided here is Pre Rooted and has TWRP included. With twrp you can root any rom, but seems like the file is corrupt so ill have to upload it again as soon as i get home
Click to expand...
Click to collapse
thanks for you help
yes i you have the good file could you add a link for everybody?
http://www.tmallbox.com/brand-phone/18401-mtk6752-lenovo-a7600-4g-let-octa-core-1280720-2g8g.html
it s what i have bought
but the soc is not the same describe in the first page..do you have the same?
New full firmware package available: https://drive.google.com/open?id=0B5Lqys5p5m_YU2xxZ3d4T0V5WjA
VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU
I got this as ota update yesterday, on official lenovo rom. Btw, this needs to be flashed with stock recovery (rename file as "update.zip")
Actually, you can flash it with TWRP/custom recovery, just tried it
Also, you should flash Gapps after the initial boot and setup, or it may cause problems.
Here is also the TWRP 2.8.7.0 recovery with English language: https://drive.google.com/open?id=0B5Lqys5p5m_YR0VfSXFPZ0RIZEk
The new firmware is good. So far I've noticed it has solved a big bug with launcher. Previously I could not use widgets with 3rd party launcher (settings fc), now I can.
The launcher bug is still present, but not with Google Now Launcher when flashed with gapps.
PS: Is it ok for me to post this here? Perhaps better to make new thread?
Aosp rom
I found what seems to be a recent AOSP based rom: A7600-ZP-15.08.06.zip
Though only so far seen it on Chinese sites, like this: http://pan.baidu.com/wap/link?uk=1393301215&shareid=1110457716&third=0
Don't think I will bother getting account for that, but just letting you know.
Man thank you! If you could download this and pack it in one zip, upload it on your google drive and test it again we could privide yours! Because i sold mine so i cajt test it. Else im still ready to upload it
Sent from my HTCONE using XDA Free mobile app
I just bought the LYF Wind 1 Smartphone and couldn't find a proper way to root it, so I made up my weird way, which works perfectly fine and I'm sharing it with you guys..
Steps :-
Download Wind1Root.zip (mod edit: Please use the blue download button and not the green one.)
Extract it
Enable USB Debugging and connect the phone
Run unlock.bat
Enable USB Debugging again after reset
Run root.bat
UPDATE - Recovery replaced. Touch works now. Using Redmi 2 Recovery.
For any help, watch this video
or read the noob friendly guide at - http://www.ugeeky.com/how-to-root-lyf-wind-1/
i have unlocked bootloader.....and when i execute root.bat my lyf wind 1 shows twrp but in cmd it shows no device error....i have installed fastboot and adb
If anybody know how to replace Kinguser with SuperSU...
I tried installing Supersu-me and Superuser from playstore but none worked.
Supersu doesnt open. It stucks giving a black screen.
Its happening in my LYF wind 4.
If any custom recovery working, please do reply.
This worked well on my Lyf Wind 1 well. Not it is rooted with SU, But when i boot into recovery mode the TWRP has a bug and it shows only a blur screen after swipe to unlock. I need to power of and on again...
Bro can you please provide a root method for LYF flame 1 ? It will help me a lot !!
Need stock ROM and flasher for my Wind 1
What if something goes wrong when trying something new & attractive but UNSAFE?
If it's not available, then how to backup whole stock OS present in the phone right now?
Namashkaar ,
Thanks Harkunwar for sharing with us your brilliant work.
Can you be kind enough to confirm that
Build number and Base Band LYF_LS-5010_01_05_15
Kernel ver 3.10.49-perf [email protected] #1 sun may 15 00:51:15 cst 206
Android security patch 2016-05-01
is fit and qualifies for your script cause it seems that nothing happens on my device, can you plz help me in identifying in what I might be doing wrong ?
ibm_chandan said:
Namashkaar ,
Thanks Harkunwar for sharing with us your brilliant work.
Can you be kind enough to confirm that
Build number and Base Band LYF_LS-5010_01_05_15
Kernel ver 3.10.49-perf [email protected] #1 sun may 15 00:51:15 cst 206
Android security patch 2016-05-01
is fit and qualifies for your script cause it seems that nothing happens on my device, can you plz help me in identifying in what I might be doing wrong ?
Click to expand...
Click to collapse
That thing is working on that build number, I can personally confirm that, and as far as I know, it doesn't depend on that either. Check that fastboot is working properly
---------- Post added at 08:09 PM ---------- Previous post was at 08:06 PM ----------
Harkunwar said:
I just bought the LYF Wind 1 Smartphone and couldn't find a proper way to root it, so I made up my weird way, which works perfectly fine and I'm sharing it with you guys..
Steps :-
Download Wind1Root.zip
Extract it
Enable USB Debugging and connect the phone
Run unlock.bat
Enable USB Debugging again after reset
Run root.bat
For any help, watch this video
or read the noob friendly guide at - http://www.ugeeky.com/how-to-root-lyf-wind-1/
Click to expand...
Click to collapse
Which phone's recovery did you use? I want to port the rom for wind 1
@ Akash : Thanks for your input. Would you kind enough to post a link to fastboot , as ugeeky hosting sever is down. and I dont think the fastboot that I have is working properly. My Laptop is running Windows 10 Insider Preview 10.0.14393 64 bit . I hope it is not a problem .
Thanks again.
this is not working when i start root.bat it stucks up with a blur black screen and nothing happens I had to power off the device and power it back on. but the root did not happen, pls inform me what is the problem.
LeHarkunwar, A Big Thank You for coming up with the Root !! Have got rid of a lot of crap ware and unwanted stuff.
However, the points raised by "Java Baba" and "davinashgandi" deserve some attention. There has to be a tutorial/instructions for flashing stock firmware and stock recovery in the event that things go a little awry. A link to stock firmware and stock recovery with instructions for flashing the same is necessary and would decorate this wonderful work of yours.
Secondly, the twrp recovery is not at all functional when booted into. In such a case, applying incremental updates ( This Morning there is a new 37 MB update available) can soft brick the device.
The Wind 1 community will really appreciate if you can do something about this.
Again, Many Thanks for your superb work !!!
ibm_chandan said:
@ Akash : Thanks for your input. Would you kind enough to post a link to fastboot , as ugeeky hosting sever is down. and I dont think the fastboot that I have is working properly. My Laptop is running Windows 10 Insider Preview 10.0.14393 64 bit . I hope it is not a problem .
Thanks again.
Click to expand...
Click to collapse
you can visit this thread for downloading fastboot and adb drivers:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
---------- Post added at 03:02 PM ---------- Previous post was at 02:56 PM ----------
siddharth14 said:
LeHarkunwar, A Big Thank You for coming up with the Root !! Have got rid of a lot of crap ware and unwanted stuff.
However, the points raised by "Java Baba" and "davinashgandi" deserve some attention. There has to be a tutorial/instructions for flashing stock firmware and stock recovery in the event that things go a little awry. A link to stock firmware and stock recovery with instructions for flashing the same is necessary and would decorate this wonderful work of yours.
Secondly, the twrp recovery is not at all functional when booted into. In such a case, applying incremental updates ( This Morning there is a new 37 MB update available) can soft brick the device.
The Wind 1 community will really appreciate if you can do something about this.
Again, Many Thanks for your superb work !!!
Click to expand...
Click to collapse
Stock firmware is not modified by this method, and there's no way to backup the stock recovery until we get the factory firmware, for installing any zips to the system, you can always replace the update.zip with the file you want to flash( remember to rename the file you want to flash as update.zip) in the files folder and then run the root.bat file.
Thanks Aakash. Yes, I'm aware that this method doesn't modify stock firmware. The suggestion was made so that people with soft bricked device would be able to revert to stock firmware if anything went wrong.
As for recovery, I managed to download the stock firmware and extracted the stock recovery. I also successfully flashed the stock recovery over twrp. However, the 37 Mb update was aborted due to some mismatch. No idea how to get around this with stock recovery. Yes, it's possible over twrp like you said but I would prefer to apply it through stock recovery.
If only we had a functional custom recovery, things would be even better.
On a side note, has anybody been able to figure the rebranded model and company of Wind 1 ?
---------- Post added at 01:28 PM ---------- Previous post was at 01:15 PM ----------
Ok. I have tried flashing the downloaded update.zip via stock recovery and twrp but no success. I guess the only option left now is via sideload method. And if i'm not wrong then i would lose root if i installed it via adb sideload.
Slightly off topic, the voice Volume of Wind 1 appears low and somewhat muffled. It's not clear and loud like its in my MOTO G. Can fellow users please confirm this. I have also tried the *#4636#* code which opens the testing menu but it's of no use. Need some application or code to access the engineering menu via which we could increase the voice volume.
Hey bro,i am same version of Android on my Lyf wind 1,n I'm glad to have a solution that you came with, I want to upgrade my mobile to marshmallow(stock version), can you please instruct me how can I do that, I'll waiting 4 ur response, thank you
I humble request to help me in rooting lyf flame 2/!,
,plz plz just begging
Sent from my LS-4004 using Tapatalk
I m using windows 10 ...and when I try to open unload.bat file my Lyf wind 1 is rebooting and show android icon and stuck at there.... And cmd show's that waiting for device .....I have to open the bettry and re connect it for start my Lyf wind 1 and ... nothing happens
please can someone give me flashing tutorial for lyf wind 1 , my set is dead , its not powering on now ,
@harshad
Please ensure that you have properly installed drivers for LYF Wind 1. To check this, enable USB-Debugging and connect your LYF Wind 1 to PC. You will also get a message on your phone regarding granting authorization to your computer. Click on Yes. If you don't click on yes then you are bound to get the device not found or device offline errors !
While flashing, i got the device not found error a couple of times and i noticed that i hadn't granted authorization to my computer for USB debugging. The authorization window had popped on my mobile and i was too busy looking at my computer screen.
Now, open Device manager on your computer. Click on Scan for Hardware changes. If the drivers are not installed properly then you will see Yellow exclamation marks against your Android phone. Please install the USB drivers for LYF Wind 1. ( Google if you don't have the drivers)
You need to have;
1) ADB and Fastboot installed as Administrator
2) USB drivers for LYF Wind 1 installed
3) Allow OEM Unlocking , enabled via developer options.
4) Enable USB debugging , enabled via developer options.
If all the above things are in order then you shouldn't have any problems rooting LYF Wind 1 with Le Harkunwar's excellent tutorial.
---------- Post added at 04:19 PM ---------- Previous post was at 04:13 PM ----------
Amit2310 said:
please can someone give me flashing tutorial for lyf wind 1 , my set is dead , its not powering on now ,
Click to expand...
Click to collapse
Try a battery pull. Take out the battery and wait for 5-10 seconds. Insert the battery and now try powering up the device.
found this for stock rom installation incase something goes wrong http://giveawaytricks.in/install-stock-rom-on-lyf-wind-1-lyf-ls-5010/
Amit2310 said:
please can someone give me flashing tutorial for lyf wind 1 , my set is dead , its not powering on now ,
Click to expand...
Click to collapse
you need to download stock rom and flash that to make your phone work again. I found this site, zeon22 has also listed a site, but i found this to be more user friendly in downloading files.
http://repairmymobile.in/flash/lyf-wind-1-ls-5010-stock-rom/
---------- Post added at 04:36 AM ---------- Previous post was at 04:26 AM ----------
siddharth14 said:
Thanks Aakash. Yes, I'm aware that this method doesn't modify stock firmware. The suggestion was made so that people with soft bricked device would be able to revert to stock firmware if anything went wrong.
As for recovery, I managed to download the stock firmware and extracted the stock recovery. I also successfully flashed the stock recovery over twrp. However, the 37 Mb update was aborted due to some mismatch. No idea how to get around this with stock recovery. Yes, it's possible over twrp like you said but I would prefer to apply it through stock recovery.
If only we had a functional custom recovery, things would be even better.
On a side note, has anybody been able to figure the rebranded model and company of Wind 1 ?
---------- Post added at 01:28 PM ---------- Previous post was at 01:15 PM ----------
Ok. I have tried flashing the downloaded update.zip via stock recovery and twrp but no success. I guess the only option left now is via sideload method. And if i'm not wrong then i would lose root if i installed it via adb sideload.
Slightly off topic, the voice Volume of Wind 1 appears low and somewhat muffled. It's not clear and loud like its in my MOTO G. Can fellow users please confirm this. I have also tried the *#4636#* code which opens the testing menu but it's of no use. Need some application or code to access the engineering menu via which we could increase the voice volume.
Click to expand...
Click to collapse
I also received the update but I'm not interested in updating since my phone is running fine just now, I don't want to loose root or brick my phone while updating which will most probably be more bloatware(few more apps from reliance jio). I will wait if marshmallow arrives for flashing stock rom if it arrives (although chances are pretty slim). Meanwhile I'm working on a port of cyanogenmod for this device form Yu Yunique, the device from which harkunwar got this twrp from, but I'm still not able to resolve touchscreen driver issue. Info on this device is really limited, and i don't know anything except that this device is from zte.
Hi, first time posting.
Please can someone help me install recovery on my Cubot max (android 6.0).
I would like to root the device, but haven't been able to flash a recovery across, and without that I don't know where to start.
I have followed the instructions here; -edit- I can't post links. But if you type "how to root Cubot max" in google the the stupdroid link is on of the top ones.
Already installed the mtk drivers for win 10, turned on USB debugging, allowed oem changes etc.
Got as far as adding the scatter file and pressing download on the sp flash tool, but I was given the error "CHIP TYPE NOT match!! Target efuse value: 0x54000004".
I guess it's because the file in the link is for a different phone (but I heard you can use recovery from similar phones). After hours of searching I can't find any other files to flash the phone with.
Has anyone successful installed a custom recovery or rooted a Cubot max? If so, please share how you did it.
Any suggestions welcome, Many thanks.
[Solved]
OP here. Problem solved! I found a new file for twrp for cubot max, flashed it and now am rooted. Can't share links but I google searched "twrp for cubot max" or something similar and downloaded a file from "needrom" website by user jemmini. It was Rom version 3.0.2.
I hope one day this helps someone else, there isn't much chatter about the cubot max out there.
Help arrived
It is a much easier process of you have a computer at your side and install Mobogenie on it as well.
Sarquon said:
OP here. Problem solved! I found a new file for twrp for cubot max, flashed it and now am rooted. Can't share links but I google searched "twrp for cubot max" or something similar and downloaded a file from "needrom" website by user jemmini. It was Rom version 3.0.2.
I hope one day this helps someone else, there isn't much chatter about the cubot max out there.
Click to expand...
Click to collapse
what scatter file did you use as the one you recommend was not working for me??
thanks doug
---------- Post added at 05:57 PM ---------- Previous post was at 05:47 PM ----------
I get this error (screenshot) ****mega.nz/#!uwowwI7D!R8yBPStd53DcyatwGgW3na3FUN_sHis1sj9HQpV_lvY***